Dual Molecular Oxygen Activation Sites on Conjugated Microporous Polymers for Enhanced Photocatalytic Formation of Benzothiazoles

Understanding the Structural Modulations in Twisted Donor-Acceptor-Donor (D-A-D) Systems for Boosting Type I Photosensitizing Photocatalytic Activity

Supramolecular assemblies based on the twisted donor-acceptor-donor (D-A-D) building block Qx-Ind have been developed, which interestingly, due to the balanced angle of twist (38.28°), high intermolecular charge transfer, and crystallization induced emission (CIE) characteristics, exhibit high molar absorptivity and a long-lived "lighted" excited state at the supramolecular level. The validity of the design concept was examined by preparing CIE active D-A-D system Qx-Indaz (weak donor, low angle of twist: 35.45°), in which, due to the insertion of an additional binding site for noncovalent interactions, a drastic change in the photophysical behavior is observed. The combined spectroscopic studies of all the compounds unveil the strong impact of modulation of the angle of twist and intermolecular charge transfer upon photophysical behavior in the aggregated state. Due to the favorable photophysical behavior, the supramolecular assemblies of Qx-Ind exhibit high type I photosensitizing activity in comparison to Qx-Indaz. The superior type I photosensitizing activity of Qx-Ind assemblies is manifested in their ability to efficiently catalyze the aerobic oxidative synthesis of quinazolin-4(3H)-ones (via type I ROS) from 2-aminobenzamide and aromatic aldehydes in the absence of additional additives (base/oxidant). Unlike photocatalytic nanoassemblies reported in the literature, due to the CIE characteristics, Qx-Ind does not require preliminary preparation and could be directly introduced in the solid state to reaction media. Thus, the present work demonstrates a simple strategy of upgrading type I photosensitizing activity by improving the ground/excited state behavior of a twisted D-A-D system through modulation of the angle of twist and charge transfer characteristics.

Localized Electron Redistribution in Methanol Molecules over the Sea Urchin-like Tricobalt Tetroxide/Copper Oxide Nanostructures for Fast Hydrogen Release

Catalytic methanolysis of ammonia borane (NH3BH3) is a prospective technology in the field of hydrogen energy in which hydrogen production and hydrogen storage can be integrated together. The splitting of the O-H bond is identified as the rate-determining step (RDS) in this reaction. Thus, a deep understanding of the relationship between the electronic structure of the catalyst, especially the localized electron density of active sites, and the breaking behaviors of the O-H bond is of extreme importance for the rational design of robust catalysts for the reaction. In this work, sea urchin-like tricobalt tetroxide/copper oxide (Co3O4/CuO) nanostructures with rich oxygen vacancies (Ov) were fabricated by a simple synthetic route. In NH3BH3 methanolysis, the optimal Co3O4/CuO sample exhibited ultrahigh catalytic activity with a turnover frequency (TOF) of 87.5 min-1. Interestingly, when NH3BH3 methanolysis was carried out under visible-light illumination, the TOF further increased to 116.4 min-1, which is the highest TOF value among those of the noble-metal-free catalysts ever documented in the literature. Theoretical calculation results evidenced that the Cu site in the Co3O4/CuO sample was in charge of the adsorption and activation of methanol molecules. Both the Ov and visible-light illumination can help electrons on the Cu site flow to the adsorbed methanol molecule, thus leading to localized electron redistribution of the methanol molecule and the extension of the O-H bond. The cooperation of Ov and visible light makes splitting of the O-H bond easier, which is favorable for fast hydrogen release from NH3BH3 methanolysis. This study helps us to gain an insight into the influence of localized electron redistribution of methanol molecules on the RDS, which conduces to the rational design of highly effective nanocatalysts. Moreover, the coinduction strategy for localized electron redistribution with oxygen vacancy engineering and visible-light illumination opens up a route to boost catalytic activity in NH3BH3 methanolysis.

Carbonized Polymer Dots-Promoted Photocatalytic Activation of Molecular Oxygen for Efficient and Selective Oxidation of Thioethers to Sulfoxides

Sulfoxides are essential in pharmaceuticals and chemicals, yet traditional thioether oxidation struggles with selectivity and sustainability. This study introduces carbonized polymer dots (CPDs) as effective photocatalysts for ecofriendly thioether to sulfoxide oxidation, using water and ethanol to enhance reaction selectivity and efficiency under 455 nm blue light. These catalysts not only show remarkable efficacy under mild conditions but also display high selectivity for sulfoxide formation, proving versatile across a broad range of substrates. We further elucidated the catalytic mechanism, confirming the predominant roles of singlet oxygen and superoxide anions through both spectroscopic evidence and quenching experiments. The method extends to the synthesis of pharmaceuticals such as oxfendazole, albendazole sulfoxide, and sulindac, highlighting its practical utility. Overall, our findings present a sustainable and efficient avenue for sulfoxide synthesis, thereby broadening the practical utility of CPDs in photocatalytic transformations.

Symmetry-Engineered BINOL-Based Porous Aromatic Frameworks for H2O2 Production via Artificial Photosynthesis and In Situ Degradation of Pharmaceutical Pollutants

Accomplishing visible light-driven H2O2 production at millimolar concentrations is practically challenging, particularly for organic semiconductors. In this context, achieving a maximum H2O2 production rate of 31.60 mmol·g-1·h-1 by using porous aromatic frameworks (PAFs) represents a significant accomplishment. We report the unusual photoactivity of tetraphenylmethane-BINOL-linked PAFs in triplet oxygen activation to facilitate the generation of reactive oxygen species (ROS), as confirmed by their optical and electrochemical responses, despite the absence of a conventional chromophoric moiety. Moreover, an in situ BINOL formation strategy was used to synthesize these PAFs during polymerization in contrast to the reported protocols involving chiral BINOLs as precursors. The as-synthesized polymers had a capsule-like morphology (for TPM-BINOL-6), high thermal stability up to 348 °C, and a high Brunauer-Emmett-Teller (BET) surface area of up to 1382 m2/g (for TPM-BINOL-4). Interestingly, they showed sunlight-driven production of H2O2 via an oxygen reduction reaction of up to 17.05 mmol·g-1·h-1 in 1:10 isopropanol in water for TPM-BINOL-6, which was quantified by titration with ceric sulfate. It also exhibited exemplary photocatalytic efficiency with an H2O2 production rate of 6.65 mmol·g-1·h-1 in seawater. Interestingly, the H2O2 production rate reached a maximum of 18.03 mmol·g-1·h-1 with an SCC efficiency of 4.5% under an AM 1.5G solar simulator and apparent quantum yield (AQY) of 15.8% (at λ = 456 nm) for TPM-BINOL-6 in ethanol:water = 1:10. Moreover, the exceptionally high H2O2 production rate of 31.60 mmol·g-1·h-1 was achieved in 1:1 ethanol in water under 50 W blue LED light. Furthermore, these PAFs generated adequate ROS, which were utilized in the photocatalytic degradation of tetracycline via the superoxide intermediate. Additionally, the as-formed H2O2 was further channelized in the pollution abatement catalytic system for the fast degradation of ciprofloxacin (within 4 h) and the reduction of toxic oxometallate Cr(VI) within 10 min, which is one of the earliest reports of utilizing photosynthesized H2O2 for environmental detoxification.

Constructing Functional Radiation-Resistant Thorium Clusters for Catalytic Redox Reactions

When catalytic reactions are interfered with by radiation sources, thorium clusters are promising as potential catalysts due to their superior radiation resistance. However, there is currently very little research on the design synthesis and catalytic application of radiation-stable thorium clusters. In this work, we have elaborately engineered and fabricated three high-nuclear thorium cluster catalysts denoted as Th12L3-MA12, Th12L3-MA6-BF6, and Th12L3-Fcc12, which did not undergo any significant alterations in their molecular structures and compositions after irradiation with 690 kGy γ-rays. We systematically investigated the photocatalytic/thermocatalytic properties of these radiation-resistant thorium clusters for the first time and found that γ-rays could not alter their catalytic activities. In addition, it was found that ligand engineering could modulate the catalytic activity of thorium clusters, thus expanding the range of catalytic applications of thorium clusters, including reduction reactions (nitroarene reduction) and some oxidation reactions (N-heterocyclic oxidative dehydrogenation and diphenylmethane oxidation). Meanwhile, all of these organic transformation reactions achieved a >80% conversion and nearly 100% product selectivity. Radiation experiments combined with DFT calculations showed that the synergistic catalysis of thorium-oxo core and ligands led to the generation of specific active species (H+, O2•-, or tBuO/tBuOO•) and activation of substrate molecules, thus achieving superior catalytic performance. This work is not only the first to develop radiation-resistant thorium cluster catalysts to perform efficient redox reactions but also provides design ideas for the construction of high-nuclearity thorium clusters under mild conditions.

Promoting Photocatalytic Direct C-H Difluoromethylation of Heterocycles using Synergistic Dual-Active-Centered Covalent Organic Frameworks

Difluoromethylation reactions are increasingly important for the creation of fluorine-containing heterocycles, which are core groups in a diverse range of biologically and pharmacologically active ingredients. Ideally, this typically challenging reaction could be performed photocatalytically under mild conditions. To achieve this separation of redox processes would be required for the efficient generation of difluoromethyl radicals and the reduction of oxygen. A covalent organic framework photocatalytic material was, therefore, designed with dual reactive centers. Here, anthracene was used as a reduction site and benzothiadiazole was used as an oxidation site, distributed in a tristyryl triazine framework. Efficient charge separation was ensured by the superior electron-donating and -accepting abilities of the dual centers, creating long-lived photogenerated electron-hole pairs. Photocatalytic difluoromethylation of 16 compounds with high yields and remarkable functional group tolerance was demonstrated; compounds included bioactive molecules such as xanthine and uracil. The structure-function relationship of the dual-active-center photocatalyst was investigated through electron spin resonance, femtosecond transient absorption spectroscopy, and density functional theory calculations.

Strategic Insertion of Heavy Atom to Tailor TADF OLED Material for the Development of Type I Photosensitizing Catalytic Red Emissive Assemblies

The work presented in the manuscript describes a simple strategy for transforming thermally activated delayed fluorescent organic light-emitting diodes (TADF OLEDs) compound 10-(dibenzo[a,c]phenazin-11-yl)-10H-phenoxazine (DPZ-PXZ) into type I photosensitizer 10-(dibenzo[a,c]phenazin-11-yl)-10H-phenothiazine (DPZ-PHZ) by strategically introducing sulfur atom in the photosensitizing core. The synthesized compound DPZ-PHZ exhibits aggregation-induced enhancement (AIE) and through-space charge transfer (TSCT) characteristics and generates red emissive assemblies in mixed aqueous media. The original compound DPZ-PXZ exhibits well-separated HOMO and LUMO levels and is reported to have highly efficient reverse intersystem crossing (RISC). In comparison, the incorporation of sulfur atom in the phenothiazine donor regulates the electronic communication between donor and acceptor units and promotes the intersystem crossing (ISC) in DPZ-PHZ molecules. Interestingly, compound DPZ-PHZ exhibits rapid activation of aerial oxygen for instant generation of superoxide radical anion. Backed by excellent type I photosensitizing activity, DPZ-PHZ assemblies have high catalytic potential for the synthesis of benzimidazoles, benzothiazoles and quinazolines derivatives under mild reaction conditions. The work presented in the manuscript provides an insight into the combination of heavy atom approach and TSCT for achieving adequate electronic communication between donor and acceptor units, balanced RISC/ISC, and stabilized-charge separated state for the development of efficient type I photosensitizing assemblies.

Tripodal Triazine and 1,8-Naphthalimide-based Small Molecules as Efficient Photocatalysts for Visible-light Oxidative Condensation

Tripodal donor-acceptor (D-A) small molecules Tr-Np3 and Tr-T-Np3 consisting of triphenyl triazine and 1,8-naphthalimide, without and with a thiophene spacer have been synthesized. Their optical and redox properties were thoroughly investigated along with their utilization as photocatalysts in organic transformations. Compounds Tr-Np3 and Tr-T-Np3 showed broad absorption in the range of 290-480 nm in solutions and 300-510 nm in thin films. These tripodal molecules displayed wide optical bandgaps of (Eg opt ) 3.10 eV and 2.64 eV with very deep-lying HOMO energy levels (-6.60 eV and -6.03 eV) and low-lying LUMO levels (-3.50 eV and -3.40 eV). Appreciable electron mobilities of 5.24×10-4  cm2 /Vs and 6.14×10-4  cm2 /Vs were obtained for compounds Tr-Np3 and Tr-T-Np3 respectively by space-charge limited current (SCLC) measurements. Metal-free tripodal molecules Tr-Np3 and Tr-T-Np3 showed excellent photocatalytic abilities towards condensation of aromatic aldehydes and o-phenylenediamine followed by cyclization under visible light to yield benzimidazole derivatives that are of high medicinal value.

Emerging conjugated polymers for heterogeneous photocatalytic chemical transformation

In recent decades, the efficient utilization of solar energy through heterogeneous photocatalytic chemical transformation has attracted much attention. As emerging metal-free, pure organic and heterogeneous photocatalysts, π-conjugated polymers (CPs) have been used in visible-light-driven chemical transformations due to their stability, high specific surface area, metal-free nature, and high structural designability. In this review, we summarize the synthesis protocols and design strategies for efficient CP-based photocatalysts based on the photocatalytic mechanisms. Then we highlight the key progress in light-driven chemical transformation using CPs developed by our group. Finally, we present the outlook and possible challenges for future progress of the field.