Ratiometric Luminescent Thermometer Based on the Lanthanide Metal-Organic Frameworks by Thermal Curing

Ratiometric fluorescence sensor based on bimetallic organic frameworks for anthrax biomarker detection

It is of great significance to construct ratiometric fluorescence sensors with simple operation and desirable anti-interference ability. In this study, a bimetallic organic framework was prepared for the first time by a one-pot solvothermal method, using 4,4'-biphenyl dicarboxylic acid as ligand, lanthanide metal terbium ions (Tb3+) and transition metal zirconium ions (Zr4+) as central metal ions. This preparation method was easy to carry out. On this basis, a novel ratiometric fluorescence sensor Tb-Zr-MOF was constructed successfully for the detection of anthrax biomarker (2,6-pyridinedicarboxylic acid (DPA)). When DPA was added into the detection system, the fluorescence of Tb3+ was enhanced due to the energy transfer from DPA to Tb3+. Therefore, under the single excitation at 285 nm, the fluorescence emission intensity of Tb-Zr-MOF at 402 nm remained unchanged and the fluorescence emission intensity at 546 nm increased. As a ratiometric fluorescence sensor, Tb-Zr-MOF showed good linear response to DPA in the range of 5∼100 μM and the limit of detection was 1.72 μM. This sensor reduces the interference of environmental factors and achieves high sensitivity detection, which is superior to the traditional single emission peak fluorescence sensor. In addition, the developed Tb-Zr-MOF sensor was used to detect DPA in Bauhinia bark samples successfully. The recovery rate was 98.80%∼104.8%, which proved the practical application of Tb-Zr-MOF in complex environment. It is expected to provide a reliable method for the detection of biomarkers of Bacillus anthracis.

Rationally Designed Binder with Polysulfide-Affinitive Moieties and Robust Network Structures for Improved Polysulfide Trapping and Structural Stability of Sulfur Cathode

Lithium-sulfur batteries (LSBs) have emerged as a promising next-generation energy storage application owing to their high specific capacity and energy density. However, inherent insulating property of sulfur, along with its significant volume expansion during cycling, and shuttling behavior of lithium-polysulfides (LiPSs), hinder their practical application. To overcome these issues, a crosslinked cationic waterborne polyurethane (CCWPU) is rationally designed as a binder for LSBs. The mechanical robustness of CCWPU enables it to withstand the high stress derived from volume expansion of sulfur, facilitating charge-transferring through conserved charge-transfer pathway and promoting interconversion of LiPSs. Additionally, polar urethane groups offer favorable interaction sites with LiPSs, mitigating shuttling behavior of LiPSs via polar-polar interaction. Density functional theory investigations further elucidate that the incorporation of cationic moieties enhances LiPSs immobilization by confining Sn x- (x = 1 or 2) in LiPSs, thereby improving sulfur utilization. Benefiting from these, the cell with CCWPU demonstrates reduced polarization, superior LiPSs conversion rates, and stable cycling performance. Moreover, water-processable nature of CCWPU aligns with environmental consciousness. These diverse functionalities of CCWPU provide valuable insights for the development of advanced binder for LSBs, ultimately improving the electrochemical performances of LSBs.

Single-phase dye-embedded triple-emitting EY&BPEA@Zr-MOFs for selective detection of inorganic ions in environmental water

The synthesis of multi-wavelength emission fluorescent metal-organic framework sensors has received widespread attention in recent years. Under solvothermal conditions, a series of triple-emission fluorescent sensors were fabricated by in situ encapsulation of red emitting Eosin Y and green emitting 9,10-bis(phenylethynyl)anthracene (BPEA) into a blue emitting naphthalene-based Zr-MOF. By combining the dye quantity regulation and the resonance energy transfer between MOFs and dyes, the single-phase EY&BPEA@Zr-MOFs exhibited tunable triple-emission fluorescence. The EY&BPEA@Zr-MOFs presented the ability to selectively detect Cr2O72- ions and Fe3+ ions in aqueous solution by means of fluorescence quenching and changes in color coordinates. Mechanistic studies revealed that the main mechanism for detecting Cr2O72- and Fe3+ ions involves a cooperative interplay between electron transfer and fluorescence resonance energy transfer between MOFs and analytes. The detection experiments conducted with real-world water samples and the portable fluorescence test papers, conclusively validated the practical applicability of EY&BPEA@Zr-MOFs.

A novel Ln3+/Al3+ metallacrown multifunctional material for latent fingerprint detection, luminescent thermometers and luminescent sensors

Lanthanide luminescent complexes are active and thriving in various research fields due to their unique optical properties, while optical materials across a wide spectral range and with multiple functions in one were rarely reported. In this work, a new class of Ln3+/Al3+ metallacrowns (MCs) were constructed with excellent luminescence properties in both the visible and near-infrared regions, and the elaborate luminescence modulation can be achieved by doping with different Ln3+ ions. Strikingly, the powder of LnMC was developed as a luminescent nanomaterial for the detection of latent fingerprints (LFPs), and even the third level details of fingerprints can be clearly recognized, which provides a reference for the identification of fingerprints in the field of criminal investigation. More importantly, TbMC and Tb0.1Sm0.9MC can be successfully used as luminescent thermometers with sensitivities of 2.51% °C-1 and 2.33% °C-1, respectively, higher than most reported values. Meanwhile, TbMC was developed as a luminescent probe for Fe3+ and 2,6-pyridinedicarboxylic acid (DPA) with low limits of detection (LOD) of 0.51 μM and 4.26 μM, respectively, representing the first example of MC with luminescence sensing. Also of note is that SmMC, Tb0.1Sm0.9MC and TbMC can be functionalized as luminescent inks and films due to their clear recognizable colours in the visible range, suggesting a new strategy for high-level anti-counterfeiting. In short, the LnMC luminescent material has wide application prospects in many fields, especially rare for multifunctional applications of small-molecule complexes with non-metal-organic frameworks.

Lanthanide coordination polymers as luminescent laccase mimics for ratiometric sensing of dopamine

Some metal ions, with inner enzyme-like catalytic activity, could be doped into lanthanide coordination polymers (Ln CPs) through coordination, which has been proved as a facile strategy to prepare the luminescent nanozymes. In this study, Cu-doped Ln CPs with laccase-mimic activity and double luminescence were rationally designed and synthesized by self-assembly of guanine monophosphate (GMP), 2-aminoterephthalic acid (ATA), Cu2+ and Tb3+ in buffer solution at room temperature. The obtained probes Tb/Cu-GMP/ATA CPs not only emitted green fluorescence of Tb3+ and blue fluorescence of ATA simultaneously under irradiation at the same wavelength, but also processed enhanced laccase-like activity for catalyzing the oxidation of phenolic substrates. Upon dopamine (DA), the probes catalyzed the oxidation of DA to polydopamine (PDA), which effectively quenched the fluorescence of Tb3+ due to the internal filtration effect. Based on this, a ratiometric fluorescent sensor for DA was constructed accordingly, and the corresponding fluorescence intensity ratio of Tb3+to ATA (F547/F427) was linearly correlated with the DA concentration in the range of 1 to 400 μM, with a detection limit of 0.44 μM. Besides, this sensor could be used to detect DA in human serum samples with good recovery, which results were highly consistent with that of HPLC method. The constituent and luminescence tunability, as well as the extraordinarily facile synthesis, made Ln CPs a potential platform for designing and preparing the integrated multifunctional probe for special target in sensing applications.

TBAPy-based metal-organic frameworks with phosphate-induced fluorescence for detecting gossypol

How to achieve good dispersion of MOFs (metal-organic frameworks) is the key to its application in many fields. In our work, a novel MOF nanocomposite TBAPy-Yb was synthesized by solvothermal approach with TBAPy [1,3,6,8-tetrakis(p-benzoic acid)pyrene)] as the organic ligand and lanthanide metal ions as the metal ion source. Due to the coordination between phosphate and TBAPy-Yb, TBAPy-Yb had excellent dispersion in phosphate buffer and induced strong fluorescence emission in 435 nm. Gsp (gossypol) could regularly and instantly quench the induced fluorescence of TBAPy-Yb in the range of 10.0 to 70.0 μM and cause an obvious color change from blue to colorless. The detection limit was as low as 4.57 μM. The possible interferences in cottonseed oil did not influence the detection. The proposed method was effectively applied toanalyzeGsp oil with a recovery rate ranging from 94.20 % to 104.90 %. Furthermore, a portable and smart sensing platform was developed based on probe fixation and mobile phones.

When microplastics/plastics meet metal-organic frameworks: turning threats into opportunities

Significant efforts have been devoted to removal and recycling of microplastics (MPs; <5 mm) to address the environmental crises caused by their ubiquitous presence and improper treatment. Metal-organic frameworks (MOFs) demonstrate compatibility with MPs/plastics through adsorption, degradation, or assembly with the MPs/plastic polymers. Above 90% of MPs/plastic particles can be adsorbed on MOF materials via the hydrophobic interaction, electrical attraction, π-π stacking, and van der Waals forces. Meanwhile, certain MOFs have successfully converted various types of plastics into high-valued small molecules through thermocatalysis and photocatalysis. In thermocatalysis, the primary process should be C-O bond cleavage, whereas in photocatalysis it ought to be the generation of reactive oxygen species (ROS). Moreover, the construction of novel MOFs using waste MPs/plastics as the ligands was mostly accomplished through three dominant ways, including glycolysis, hydrolysis and methanolysis. Once successfully composited, the MOF@plastic materials illustrated tremendous promise for interdisciplinary research in multifunctional applications, including sewage treatment, gas adsorption/separation, and the preparation of microbial fuel cells, plastic scintillators and other sensors. The review explicated the relationships between MPs/plastics and MOF materials, as well as the challenges and perspectives for their development. It can provide a deeper understanding of how MOFs remove/degrade MP/plastic particles, how MPs/plastics are recycled to prepare MOFs, and how to build multifunctional MOF@plastic composites. Overall, this analysis is anticipated to outline future prospects for turning the threats (MPs/plastics contamination) into opportunities (e.g., as ligands to prepare MOF or MOF@plastic materials for further applications).

Multi-functional GdEuxTb1-xO3 (x = 0 to 1) nanoparticles: colour tuning optical properties, water proton spin relaxivities, and X-ray attenuation properties

Multi-functional nanoparticles are useful for various applications, such as biomedical imaging, detection, and display technologies. Colour-tunable GdEuxTb1-xO3 nanoparticles were synthesized with emission colour ranging from green (545 nm) to red (616 nm) by varying x (x = 0, 0.1, 0.3, 0.5, 0.7, 0.9, and 1). These nanoparticles were surface-grafted with polyacrylic acid and a small quantity of 2,6-pyridinedicarboxylic acid. This modification aimed to ensure long-term colloidal stability (>1 year without precipitation) and high quantum yields (>30%) in aqueous media. Additionally, they exhibited long emission lifetimes (∼1 ms), high longitudinal water proton spin relaxivities (>30 s-1mM-1), and high X-ray attenuation efficiencies (∼10 HU mM-1). These multiple exceptional properties within a single nanoparticle make them highly valuable for applications in biomedical imaging, noise-free signal detection, and colour display.

Luminescence Nanothermometry: Investigating Thermal Memory in UiO-66-NH2 Nanocrystals

Metal-organic frameworks (MOFs), a diverse and rapidly expanding class of crystalline materials, present many opportunities for various applications. Within this class, the amino-functionalized Zr-MOF, namely, UiO-66-NH2, stands out due to its distinctive chemical and physical properties. In this study, we report on the new unique property where UiO-66-NH2 nanocrystals exhibited enhanced fluorescence upon heating, which was persistently maintained postcooling. To unravel the mechanism, the changes in the fluorescence signal were monitored by steady-state fluorescence spectroscopy, lifetime measurements, and a fluorescence microscope, which revealed that upon heating, multiple mechanisms could be contributing to the observed enhancement; the MOFs can undergo disaggregation, resulting in a fluorescent enhancement of the colloidally stable MOF nanocrystals and/or surface-induced phenomena that result in further fluorescence enhancement. This observed temperature-dependent photophysical behavior has substantial applications. It not only provides pathways for innovations in thermally modulated photonic applications but also underscores the need for a better understanding of the interactions between MOF crystals and their environments.

Optical Phenomena in Molecule-Based Magnetic Materials

Since the last century, we have witnessed the development of molecular magnetism which deals with magnetic materials based on molecular species, i.e., organic radicals and metal complexes. Among them, the broadest attention was devoted to molecule-based ferro-/ferrimagnets, spin transition materials, including those exploring electron transfer, molecular nanomagnets, such as single-molecule magnets (SMMs), molecular qubits, and stimuli-responsive magnetic materials. Their physical properties open the application horizons in sensors, data storage, spintronics, and quantum computation. It was found that various optical phenomena, such as thermochromism, photoswitching of magnetic and optical characteristics, luminescence, nonlinear optical and chiroptical effects, as well as optical responsivity to external stimuli, can be implemented into molecule-based magnetic materials. Moreover, the fruitful interactions of these optical effects with magnetism in molecule-based materials can provide new physical cross-effects and multifunctionality, enriching the applications in optical, electronic, and magnetic devices. This Review aims to show the scope of optical phenomena generated in molecule-based magnetic materials, including the recent advances in such areas as high-temperature photomagnetism, optical thermometry utilizing SMMs, optical addressability of molecular qubits, magneto-chiral dichroism, and opto-magneto-electric multifunctionality. These findings are discussed in the context of the types of optical phenomena accessible for various classes of molecule-based magnetic materials.

SHG-active luminescent thermometers based on chiral cyclometalated dicyanidoiridate(iii) complexes

Multifunctional optical materials can be realized by combining stimuli-responsive photoluminescence (PL), e.g., optical thermometry, with non-linear optical (NLO) effects, such as second-harmonic generation (SHG). We report a novel approach towards SHG-active luminescent thermometers achieved by constructing unique iridium(iii) complexes, cis-[IrIII(CN)2(R,R-pinppy)2]- (R,R-pinppy = (R,R)-2-phenyl-4,5-pinenopyridine), bearing both a chiral 2-phenylpyridine derivative and cyanido ligands, the latter enabling the formation of a series of molecular materials: (TBA)[IrIII(CN)2(R,R-pinppy)2]·2MeCN (1) (TBA+ = tetrabutylammonium) and (nBu-DABCO)2[IrIII(CN)2(R,R-pinppy)2](i)·MeCN (2) (nBu-DABCO+ = 1-(n-butyl)-1,4-diazabicyclo-[2.2.2]octan-1-ium) hybrid salts, (TBA)2{[LaIII(NO3)3(H2O)0.5]2[IrIII(CN)2(R,R-pinppy)2]2} (3) square molecules, and {[LaIII(NO3)2(dmf)3][IrIII(CN)2(R,R-pinppy)2]}·MeCN (4) coordination chains. Thanks to the chiral pinene group, 1-4 crystallize in non-centrosymmetric space groups leading to SHG activity, while the N,C-coordination of ppy-type ligands to Ir(iii) centers generates visible charge-transfer (CT) photoluminescence. The PL characteristics are distinctly temperature-dependent which was utilized in achieving ratiometric optical thermometry below 220 K. The PL phenomena were rationalized by DFT/TD-DFT calculations indicating an MLCT-type of the emission in obtained Ir(iii) complexes with the rich vibronic structure providing a few emission bands that variously depend on temperature due to the role of thermally activated vibrations. As these crucial vibrational modes depend on the crystal lattice, the thermometry performance differs within 1-4 being the most efficient in 4 while the SHG is by far the best also for 4. This proves that pinene-functionalized cyclometalated dicyanidoiridates(iii) are great prerequisites for tunable PL-NLO conjunction with the most effective multifunctionality ensured by the insertion of these anions into bimetallic frameworks.

Intensity and lifetime ratiometric luminescent thermometer based on a Tb(III) coordination polymer

A three-dimensional terbium(III) coordination polymer of formula [Tb(bttb)0.5(2,5-pzdc)0.5]n (1) [H4bttb = 1,2,4,5-tetrakis(4'-carboxyphenyl)benzene and H2-2,5-pzdc = 2,5-pyrazinedicarboxylic acid] was obtained under hydrothermal conditions. The bttb4- tetraanion in 1 adopts the bridging and chelating-bridging pseudo-oxo coordination modes while the 2,5-pzdc2- dianion exhibits a rather unusual bis-bidentate bridging pseudo-oxo coordination mode, both ligands being responsible for the stiffness of the resulting 3D structure. Solid-state photoluminescent measurements illustrate that 1 exhibits remarkable green luminescence emission, the most intense band occurring in the region of 550 nm (5D4 → 7F5) with lifetimes at the millisecond scale. Thermometric performances of 1 reveal a maximum relative sensitivity (Sm) of 0.76% K-1 at 295 K (δT = 0.05 K), constituting a TbIII ratiometric solid luminescent thermometer over the physiological temperature range. Variable-temperature static (dc) magnetic susceptibility measurements for 1 in the temperature range 2.0-300 K show the expected behavior for the depopulation of the splitted mJ levels of the 7F7 ground state of the magnetically anisotropic terbium(III) ion plus a weak antiferromagnetic interaction through the carboxylate bridges. No significant out-of-phase magnetic susceptibility signals were observed for 1 in the temperature range 2.0-10.0 K, either in the absence or presence of a static dc magnetic field.

Rare Earths-The Answer to Everything

Rare earths, scandium, yttrium, and the fifteen lanthanoids from lanthanum to lutetium, are classified as critical metals because of their ubiquity in daily life. They are present in magnets in cars, especially electric cars; green electricity generating systems and computers; in steel manufacturing; in glass and light emission materials especially for safety lighting and lasers; in exhaust emission catalysts and supports; catalysts in artificial rubber production; in agriculture and animal husbandry; in health and especially cancer diagnosis and treatment; and in a variety of materials and electronic products essential to modern living. They have the potential to replace toxic chromates for corrosion inhibition, in magnetic refrigeration, a variety of new materials, and their role in agriculture may expand. This review examines their role in sustainability, the environment, recycling, corrosion inhibition, crop production, animal feedstocks, catalysis, health, and materials, as well as considering future uses.

Bionic Luminescent Skin as Ultrasensitive Temperature-Acoustic Sensor for Underwater Information Perception and Transmission

Bioinspired artificial luminescent skin (L-skin) integrated with multiple sensing functions significantly promotes the development of smart devices. It is considerably challenging to realize underwater sensing technologies. Here, a sharkskin-inspired Eu@HOF-TJ-1@TA L-skin (1) is prepared for both temperature and sound sensing. 1 is an ultrathin and flexible temperature sensor, in 298.15-358.15 K, exhibiting ultrahigh maximum relative sensitivity (97.669% K-1 ) and low minimum uncertainty (0.000 952 K). The temperature response mechanism is analyzed deeply. As a waterproofing acoustic sensor, 1 can monitor sound in both air and water with the greatest sound response frequencies of 400 and 300 Hz in air and water, respectively. The maximum sensitivities of 1 in air and water are 6 593 765.2 and 1 346 124.5 cps Pa-1 , respectively. The response times of 1 in air and water are as fast as 20 and 10 ms. The sound response processes of 1 in air and water are simulated by finite element simulation. Moreover, by using sharkskin-inspired 1, the actual water temperature can be monitored, and a series of water sound information can be recognized by using an artificial neural network. This work proposes a sharkskin-inspired L-skin for temperature and acoustic sensing and promotes the development of underwater sensing technology with high performances.