Electron-Donor Functional Groups, Band Gap Tailoring, and Efficient Charge Separation: Three Keys To Improve the Gaseous Iodine Uptake in MOF Materials

Direct Observation of Enhanced Iodine Binding within a Series of Functionalized Metal-Organic Frameworks with Exceptional Irradiation Stability

Optimization of active sites and stability under irradiation are important targets for sorbent materials that might be used for iodine (I2) storage. Herein, we report the direct observation of I2 binding in a series of Cu(II)-based isostructural metal-organic frameworks, MFM-170, MFM-172, MFM-174, NJU-Bai20, and NJU-Bai21, incorporating various functional groups (-H, -CH3, - NH2, -C≡C-, and -CONH-, respectively). MFM-170 shows a reversible uptake of 3.37 g g-1 and a high packing density of 4.41 g cm-3 for physiosorbed I2. The incorporation of -NH2 and -C≡C- moieties in MFM-174 and NJU-Bai20, respectively, enhances the binding of I2, affording uptakes of up to 3.91 g g-1. In addition, an exceptional I2 packing density of 4.83 g cm-3 is achieved in MFM-174, comparable to that of solid iodine (4.93 g cm-3). In situ crystallographic studies show the formation of a range of supramolecular and chemical interactions [I···N, I···H2N] and [I···C≡C, I-C═C-I] between -NH2, -C≡C- sites, respectively, and adsorbed I2 molecules. These observations have been confirmed via a combination of solid-state nuclear magnetic resonance, X-ray photoelectron, and Raman spectroscopies. Importantly, γ-irradiation confirmed the ultraresistance of MFM-170, MFM-174, and NJU-Bai20 suggesting their potential as efficient sorbents for cleanup of radioactive waste.

Co-adsorption performance of iodine and NOX in iodine exhaust gas by NH2-MIL-125

Ti-based MOFs exhibit ultra-high stability in radioactive waste gases containing nitrogen oxides (NOX) and are effective in capturing radioactive iodine. In this study, NH2-MIL-125 was synthesized via a one-pot solvothermal method and its adsorption performance for iodine was investigated using batch adsorption experiments, the stability of materials was tested by simulating post-processing conditions. The results indicated that NH2-MIL-125 had a maximum iodine adsorption capacity of 1.61 g/g at 75 ℃ and reached adsorption equilibrium within 60 min, and the adsorption capacity of methyl iodine reached 776.9 mg/g. The material also exhibited excellent stability and iodine adsorption performance in the presence of NOX. After soaking in NO2 for 24 h, its structure remained stable and the adsorption capacity for iodine remained at 231.5 mg/g. The excellent co-adsorption performance of NH2-MIL-125 on iodine and NOX was attributed to the synergistic effects of Ti-OH groups and amino functional groups. These findings provide a reference for the capture of radioactive iodine and also demonstrate the potential of NH2-MIL-125 for iodine capture during spent fuel reprocessing.

Elucidating Structural Stability, Bandgap, and Photocatalytic Hydrogen Evolution of (H2O/DMF)@HKUST-1 Host-Guest Systems

The H2O@HKUST-1 and DMF@HKUST-1 systems were experimental and computationally assessed, employing XRD/TGA/FT-IR/DFT-calculations, evidencing that H2O or DMF coordinated to Cu, modulating HKUST-1 photocatalytic properties. DMF@HKUST-1 has narrower bandgap promoting higher-crystallinity and light-harvesting. H2O@HKUST-1 showed smaller particle sizing and sharp morphology. Theoretical models, (H2O)1@HKUST-1 and (DMF)1@HKUST-1, containing one coordinated molecule, elucidated bandgap modulation associated with infiltration. H2O@HKUST-1/DMF@HKUST-1 presented bandgaps [eV] of 3.6/3.4, by Tauc plots, and 3.55/3.26, by theoretical calculations, narrowing bandgap, compared with non-solvated HKUST-1(HKUST-1NS). Both composites raised the valence band (VB) and lowered the conduction band (CB), but DMF@HKUST-1 most raised VB. Topological analysis revealed that guests i) with higher electronic density, raised VB, and ii) induced π-backbonding, lowering CB. DMF@HKUST-1 presented a higher photocatalytic hydrogen evolution (μmol), 26.45, in the first 30 min of the reaction, nevertheless, H2O@HKUST-1 presented a competitive activity, of 17.32. In large periods, H2O@HKUST-1/DMF@HKUST-1 showed practically the same hydrogen evolution, 45.50/49.03.

Stability of Iodine Species Trapped in Titanium-Based MOFs: MIL-125 and MIL-125_NH2

Two titanium-based MOFs MIL-125 and MIL-125_NH2 are synthesized and characterized using high-temperature powder X-ray diffraction (PXRD), thermogravimetric analysis (TGA), N2 sorption, Fourier transformed infrared spectroscopy (FTIR), Raman spectroscopy, ultraviolet-visible spectroscopy (UV-Vis), and electron paramagnetic resonance (EPR). Stable up to 300 °C, both compounds exhibited similar specific surface areas (SSA) values (1207 and 1099 m2 g-1 for MIL-125 and MIL-125_NH2, respectively). EPR signals of Ti3+ are observed in both, whith MIL-125_NH2 also showing ─NH2 ●+ signatures. Both MOFs efficiently adsorbed iodine in continuous gas flow over five days, with MIL-125 trapping 1.9 g.g-1 and MIL-125_NH2 trapping 1.6 g.g-1. MIL-125_NH2 exhibited faster adsorption kinetics due to its smaller band gap (2.5 against 3.6 eV). In situ Raman spectroscopy conducted during iodine adsorption revealed signal evolution from "free" I2 to "perturbed" I2, and I3 -. TGA and in situ Raman desorption experiments showed that ─NH2 groups improved the stabilization of I3 - due to an electrostatic interaction with NH2 ●+BDC radicals. The Albery model indicated longer lifetimes for iodine desorption in I2@MIL-125_NH2, attributed to a rate-limiting step due to stronger interaction between the anionic iodine species and the ─NH2 ●+ radicals. This study underscores how MOFs with efficient charge separation and hole-stabilizer functional groups enhance iodine stability at higher temperatures.

Optimizing Iodine Enrichment through Induced-Fit Transformations in a Flexible Ag(I)-Organic Framework: From Accelerated Adsorption Kinetics to Record-High Storage Density

Efficient capture and storage of radioactive I2 is a prerequisite for developing nuclear power but remains a challenge. Here, two flexible Ag-MOFs (FJI-H39 and 40) with similar active sites but different pore sizes and flexibility are prepared; both of them can capture I2 with excellent removal efficiencies and high adsorption capacities. Due to the more flexible pores, FJI-H39 not only possesses the record-high I2 storage density among all the reported MOFs but also displays a very fast adsorption kinetic (124 times faster than FJI-H40), while their desorption kinetics are comparable. Mechanistic studies show that FJI-H39 can undergo induced-fit transformations continuously (first contraction then expansion), making the adsorbed iodine species enrich near the Ag(I) nodes quickly and orderly, from discrete I- anion to the dense packing of various iodine species, achieving the very fast adsorption kinetic and the record-high storage density simultaneously. However, no significant structural transformations caused by the adsorbed iodine are observed in FJI-H40. In addition, FJI-H39 has excellent stability/recyclability/obtainability, making it a practical adsorbent for radioactive I2 . This work provides a useful method for synthesizing practical radioactive I2 adsorbents.

Fluorinated Metal-Organic Frameworks with Dual-Functionalized Linkers to Enhance Photocatalytic H2 Evolution and High Water Adsorption

Photocatalytic H2 evolution has recently attracted much attention due to the reduction of nonrenewable energy sources and the increasing demand for renewable sustainable energies. Meanwhile, metal-organic frameworks (MOFs) are emerging potential photocatalysts due to their structural adaptability, porous configuration, several active sites, and a wide range of performance. Nevertheless, there are still limitations in the photocatalytic H2 evolution reaction of MOFs with higher charge recombination rates. Herein, a copper-organic framework with dual-functionalized linkers {[Cu2(L)(H2O)2]·(5DMF)(4H2O)}n (fluorinated MOF(Cu)-NH2; H4L = 3,5-bis(2,4-dicarboxylic acid)-4-(trifluoromethyl)aniline) and with a rare 2-nodal 4,12-connected shp topology has been synthesized by a ligand-functionalization strategy and evaluated for the photocatalytic production of H2 to overcome this issue. According to the photocatalytic H2 evolution results, fluorinated MOF(Cu)-NH2 showed a hydrogen evolution rate of 63.64 mmol·g-1·h-1 exposed to light irradiation, indicating values 12 times that of the pure ligand when cocatalyst Pt and photosensitizer Rhodamine B were present. In addition, this MOF showed a maximum water absorption of 205 cm3·g-1. When dual-functionalized linkers are introduced to the structure of this MOF, its visible-light absorption increases considerably, which can be associated with nearly narrower energy band gaps (2.18 eV). More importantly, this MOF contributes to water absorption and electron collection and transport, acting as a bridge that helps to separate and transfer photogenerated charges while shortening the electron migration path because of the functional group in its configuration. The current paper seeks to shed light on the design of advanced visible-light photocatalysts with no MOF calcination for H2 photocatalytic production.