Ionic Conductivity and Cycling Performance in PEO Polymer Electrolyte Enhanced by Non-Milled In Situ Nano-LLZO Powders

A ternary composite nanofiber-derived thin membrane electrolyte for solid-state Li metal batteries

We develop novel membrane electrolytes comprising h-BN-doped poly(ethylene oxide) modified poly(vinylidene fluoride-co-hexafluoropropylene)-nanofibers (h-BN@PEO/PVH) with high ionic conductivity (3.3 × 10-4 S cm-1) and Li+ transference number (0.74), endowing solid LiFePO4//Li batteries with excellent cyclability over 1000 cycles at 60 °C. Our strategy surmounts the ionic conduction-interface stability trade-off and thin dimension-flexibility conflict.

Different-grain-sized boehmite nanoparticles for stable all-solid-state lithium metal batteries

PEO is one of the common composite polymer electrolyte vehicles; however, the presence of crystalline phase at room temperature, high interface impedance, and low oxidation resistance (<4.0 V) limit its application in stable all-solid-state lithium metal batteries. Herein, we designed a PEO-based solid polymer electrolyte (SPE) by adding boehmite nanoparticles to address the above-mentioned issues. Different-grain-sized boehmite nanoparticles were synthesized by adjusting the hydrothermal temperature. Moreover, the impacts of these distinct grain-sized boehmite nanoparticles used to fabricate boehmite/PEO polymer electrolytes (BPEs) on the performance of all-solid-state lithium metal batteries were investigated. It was found that with the increase in boehmite's grain size, BPEs show better performance. The best BPE exhibited an improved Li+ transference number (0.59), high ionic conductivity (1.25 × 10-4 S m-1), and wide electrochemical window (∼4.5 V) at 60 °C. The assembled lithium symmetric battery can stably undergo 500 hours of lithium plating/stripping at 0.1 mA cm-2. At the same time, the LiFePO4/BPE/Li battery exhibits excellent cycling stability after 100 cycles at 0.5C. This reasonable design strategy with a superior capacity retention rate (86%) demonstrates great potential in achieving high ionic conductivity and good interface stability for all-solid-state lithium metal batteries simultaneously.

Multipolar Conjugated Polymer Framework Derived Ionic Sieves via Electronic Modulation for Long-Life All-Solid-State Li Batteries

Here, we build a tunable multipolar conjugated polymer framework platform via pore wall chemistry to probe the role of electronic structure engineering in improving the Li+ conduction by theoretical studies. Guided by theoretical prediction, we develop a new cyano-vinylene-linked multipolar polymer framework namely CNF-COF, which can act as efficient ion sieves to modify solid polymer electrolytes to simultaneously tune Li+ migration and stable Li anodes for long-lifespan all-solid-state (ASS) Li metal batteries at high rate. The dual-decoration of cyano and fluorine groups in CNF-COF favorably regulates electronic structure via multipolar donor-acceptor electronic effects to afford proper energy band structure and abundant electron-rich sites for enhanced oxidative stability, facilitated ion-pair dissociation and suppressed anion movements. Thus, the CNF-COF incorporation into poly (ethylene oxide) (PEO) electrolytes not only renders fast selective Li+ transport but also facilitates the Li dendrite suppression. Specifically, the constructed PEO composite electrolyte with an ultra-low CNF-COF content of only 0.5 wt % is endowed with a wide electrochemical window, a high ionic conductivity of 0.634 mS cm-1 at 60 °C and a large Li+ transference number of 0.81-remarkably outperforming CNF-COF-free counterparts (0.183 mS cm-1 and 0.22). As such, the Li symmetric cell delivers stable Li plating/stripping over 1400 h at 0.1 mA cm-2. Impressively, by coupling with LiFePO4 (LFP) cathodes, the assembled ASS Li battery under 60 °C allows for stable cycling over 2000 cycles at 1 C and over 1000 cycles even at 2 C with a large capacity retention of ~75 %, surpassing most reported ASS Li batteries using PEO-based electrolytes.