Exploring Lipoic Acid-Mediated Dynamic Bottlebrush Elastomers as a New Platform for the Design of High-Performance Thermally Conductive Materials

Preparation and characterization of chitosan film modified with polydimethylsiloxane capped by mono-terminal epoxy groups

The development of degradable food packaging materials with hydrophobic and oleophobic properties is a key to focus in reducing plastic waste. Chitosan is gaining interest for its versatility and easy modification, but its application is limited by the poor hydrophobicity and oleophobicity. Using polymers to modify chitosan films has been shown as a promising approach to solve this issue. In this study, the modified films (CS/xmono-PDMS-E, where x = 0.25, 0.5, 1, 2, and 3 %) were prepared by utilizing mono-terminal epoxy-terminated polysiloxane (mono-PDMS) and chitosan (CS) through chemical grafting. The qualities of these films were characterized. CS/xmono-PDMS-E films were demonstrated to have enhanced hydrophobicity, oleophobicity, moisture resistance, and thermal stability in comparison to CS films. Furthermore, because SiOSi has a greater bonding energy in the PDMS chain segment, the CS/xmono-PDMS-E films showed superior UV shielding. The resistance to weathering of CS/xmono-PDMS-E films was also greatly enhanced by the low surface energy of PDMS, which moved to the surface during drying. By combining experimental design with result characterization, this work provides a new strategy for bio-based packaging materials featuring with green double sparse coatings, showing great potential for low-carbon recycling applications.

Development of highly robust polyurethane elastomers possessing self-healing capabilities for flexible sensors

Traditional flexible electronic sensing materials have fallen short in meeting the diverse application needs and environments of modern times. Hence, we require a multi-functional elastomer material to improve the overall performance and expand the functionality of flexible electronic sensors. In this study, we fabricated a multi-block polyurethane (PU) elastomer based on semi-crystalline polycaprolactone (PCL) chain segments and highly flexible polydimethylsiloxane (PDMS) chain segments, which showcases outstanding mechanical properties, self-healing capabilities, and recyclability. By adjusting the ratio parameters of the chain segments, we were able to modulate the thermodynamic behavior, hydrophobicity, mechanical behavior, and self-healing properties of the designed PU elastomers. The optimized ratios exhibited good tensile strength (16.26 MPa), high elongation at break (3300.84%), good toughness (278.82 MJ m-3, fracture energy ≈ 234.96 KJ m-2), high self-repairing (≈100%, at room temperature for 12 h), efficient recyclability, and puncture resistance. Self-healing is accomplished through the interactions between dynamic disulfide bonds, dynamic boron-oxygen bonds, and hydrogen bonds. The conductive ink (PEDOT:PSS) was encapsulated within this elastomer to construct a flexible electronic sensor, attaining excellent sensing performance (stable output for 1000 cycles). This multi-functional polyurethane elastomer acts as an ideal matrix material for flexible electronic sensors, offering novel concepts and perspectives for the next generation of green electronic flexible materials, electronic flexible robots, and other stimulus-responsive materials.

Radical Ring-Opening Polymerization: Unlocking the Potential of Vinyl Polymers for Drug Delivery, Tissue Engineering, and More

Synthetic vinyl polymers have long been recognized for their potential to be utilized in drug delivery, tissue engineering, and other biomedical applications. The synthetic control that chemists have over their structure and properties is unmatched, allowing vinyl polymer-based materials to be precisely engineered for a range of therapeutic applications. Yet, their lack of biodegradability compromises the biocompatibility of vinyl polymers and has held back their translation into clinically used treatments for disease thus far. In recent years, radical ring-opening polymerization (rROP) has emerged as a promising strategy to render synthetic vinyl polymers biodegradable and bioresorbable. While rROP has long been touted as a strategy for preparing biodegradable vinyl polymers for biomedical applications, the translation of rROP into clinically approved treatments for disease has not yet been realized. This review highlights the opportunities for leveraging rROP to render vinyl polymers biodegradable and unlock their potential for use in biomedical applications.

The Unprecedented Biodegradable Polyzwitterion: A Removal-Free Patch for Accelerating Infected Diabetic Wound Healing

Zwitterionic polymers have emerged as an important class of biomaterials to construct wound dressings and antifouling coatings over the past decade due to their excellent hydrophilicity. However, all the reported zwitterionic polymers as wound dressings are nondegradable because of noncleavable carbon─carbon bonding backbones, and must be removed periodically after treatment to avoid hypoxia in the wound, thus leading to potential secondary injury. In this work, a biodegradable polyzwitterion patch is fabricated for the first time by ring-opening polymerization of carboxybetaine dithiolane (CBDS), which is self-crosslinked via inter-amide hydrogen bonds and zwitterionic dipole-dipole interactions on the side chains. The unprecedented polyCBDS (PCBDS) patch demonstrates enough ductility owing to the intermolecular physical interactions to fully cover irregular wounds, also showing excellent biodegradability and antifouling performance resulted from the existence of disulfide bonds and carboxybetaine groups. Besides, the PCBDS degradation-induced released CBDS owns potent antioxidant and antibacterial activities. This PCBDS patch is used as a diabetic wound dressing, inhibiting bacterial adhesion on the external surface, and its degradation products can exactly kill bacteria and scavenge excessive reactive oxygen species (ROS) at the wound site to regulate local microenvironment, including regulation of cytokine express and macrophage polarization, accelerating infected diabetic wound repair, and also avoiding the potential secondary injury.

Bottlebrush Networks: A Primer for Advanced Architectures

Bottlebrush networks (BBNs) are an exciting new class of materials with interesting physical properties derived from their unique architecture. While great strides have been made in our fundamental understanding of bottlebrush polymers and networks, an interdisciplinary approach is necessary for the field to accelerate advancements. This review aims to act as a primer to BBN chemistry and physics for both new and current members of the community. In addition to providing an overview of contemporary BBN synthetic methods, we developed a workflow and desktop application (LengthScale), enabling bottlebrush physics to be more approachable. We conclude by addressing several topical issues and asking a series of pointed questions to stimulate conversation within the community.

Alveoli-Mimetic Synergistic Liquid and Solid Thermal Conductive Interface as a Novel Strategy for Designing High-Performance Thermal Interface Materials

Thermal interface materials (TIMs) are in desperate desire with the development of the modern electronic industry. An excellent TIM needs desired comprehensive properties including but not limited to high thermal conductivity, low Yong's modulus, lightweight, as well as low price. However, as is typically the case, those properties are naturally contradictory. To tackle such dilemmas, a strategy of construction high-performance TIM inspired by alveoli is proposed. The material design includes the self-alignment of graphite into 3D interconnected thermally conductive networks by polydimethylsiloxane beads (PBs) -the alveoli; and a small amount of liquid metal (LM) - capillary networks bridging the PBs and graphite network. Through the delicate structural regulation and the synergistic effect of the LM and solid graphite filler, superb thermal conductivity (9.98 ± 0.34 W m-1 K-1) can be achieved. The light emitting diode (LED) application and their performance in the central processing unit (CPU) heat dispersion manifest the TIM developed in the work has stable thermal conductivity for long-term applications. The thermally conductive, soft, and lightweight composites are believed to be high-performance silicone bases TIMs for advanced electronics.