Magnetic-assembly mechanism of superparamagneto-plasmonic nanoparticles on a charged surface

3D Gradient and Linearly Aligned Magnetic Microcapsules in Nerve Guidance Conduits with Remotely Spatiotemporally Controlled Release to Enhance Peripheral Nerve Repair

Although numerous strategies have been implemented to develop nerve guidance conduits (NGCs) to treat peripheral nerve injury (PNI), functionalization of an NGC to make it remotely controllable for providing spatiotemporal modulation on in situ nerve tissues remains a challenge. In this study, a gelatin/silk (GS) hydrogel was used to develop an NGC based on its self-owned reversible thermoresponsive sol-to-gel phase transformation ability that permitted rapid three-dimensional (3D) micropatterning of the incorporated nerve growth factor (NGF)-loaded magnetic poly(lactic-co-glycolic acid) (PLGA) microcapsules (called NGF@MPs) via multiple magnetic guidance. The thermally controllable viscosity of GS enabled the rapid formation of a 3D gradient and linearly aligned distribution of NGF@MPs, leading to magnetically controlled 3D gradient release of NGF to enhance topographical nerve guidance and wound healing in PNIs. Particularly, the as-formed micropatterned hydrogel, called NGF@MPs-GS, showed corrugation topography with a pattern height H of 15 μm, which resulted in the linear axon alignment of more than 90% of cells. In addition, by an external magnetic field, spatiotemporal controllability of NGF release was obtained and permitted neurite elongation that was almost 2-fold longer than that in the group with external addition of NGF. Finally, an NGC prototype was fabricated and implanted into the injured sciatic nerve. The patterned implant, assisted by magnetic stimulation, demonstrated accelerated restoration of motor function within 14 days after implantation. It further contributed to the enhancement of axon outgrowth and remyelination after 28 days. This NGC, with controllable mechanical, biochemical, and topographical cues, is a promising platform for the enhancement of nerve regeneration.

Wheel-like Magnetic-Driven Microswarm with a Band-Aid Imitation for Patching Up Microscale Intestinal Perforation

Microscale intestinal perforation can cause considerable mortality and is very difficult to treat using conventional methods owing to the numerous challenges associated with microscale operations, which require the development of new body-friendly and effective treatment methods. Swarming micro- and nanomotors have shown great potential in biomedical applications in complex and hard-to-reach environments. Herein, we present a wheel-like magnetic-driven microswarm (WLM) with a band-aid imitation to patch microscale intestinal perforations by pasting on the perforation point in mucus-filled environments. A method called "packing under rolling" was applied to make the formed microswarms denser and rounder. Microswarms with variable aspect ratios can be fabricated by tuning the frequency and strength of the external magnetic field. Actuation and navigation in a confined complex environment, locomotion on three-dimensional surfaces, and multiple switchable motion modes have been realized by combining AC and DC magnetic fields. Moreover, we demonstrated WLM controllable navigation, movement, and microscale perforation patching in the chicken intestines ex vivo. The proposed strategy will contribute to the treatment of microscale intestinal perforation and may be applicable to novel, precise topical medication and microsurgery.

Helical Magnetic Field-Induced Real-Time Plasmonic Chirality Modulation

The astrophysical phenomenon of mimetic helical magnetic field (hB)-assisted self-assembly is herein introduced to build helical superstructures that display chiroptical properties. As a building block, magnetoplasmonic (MagPlas) Ag@Fe₃O₄ core-shell nanoparticles are used to guide plasmonic Ag nanoparticles onto a helical magnetic flux. The chirality of the assembled helical structures and tailored circular dichroism are successfully tuned in real time, and the handedness of the assembled structures is dynamically switched by the hB at the millisecond level, which is at least 6000-fold faster than other template-assisted methods. The peak position of circular dichroism can be reconfigured by altering the plasmonic resonance or coupling by controlling the size of the Ag core and magnetic flux density. The hB-induced chirality modulation represents a method to control the polarization state of light at the nexus of plasmonics, magnetic self-assembly, colloidal science, liquid crystals, and chirality. It presents active and dynamic chiral assemblies of magnetoplasmonic nanomaterials, enabling further practical applications in optical devices.

Magnetic Layer-by-Layer Assembly: From Linear Plasmonic Polymers to Oligomers

One-dimensional nanostructures with controllable aspect ratios are essential for a wide range of applications. An approach for magnetic superparticle (SP) assembly over large areas (55 mm × 25 mm) is introduced via co-assistance of electrostatic and magnetic fields, so-called magnetic layer-by-layer assembly, on an arbitrary hydrophilic substrate within minutes. The SP structures [diameter (d) = 120-350 nm] of Fe₃O₄ or Ag@Fe₃O₄ composites composed of hundreds of magnetite nanocrystals (d = 10-20 nm) are used as colloidal monomers to fabricate arrays of high aspect ratio (up to 10²) linear nanochains, viz. colloidal polymers, where thermal disturbances were minimized. The arrays of colloidal polymers exhibit strong optical polarization effects owing to their geometrical anisotropy, which can be used as a simple optical filter. Furthermore, by using the binary colloidal mixture of different magnetic colloids, including different sized Fe₃O₄ and magnetoplasmonic Ag@Fe₃O₄, low aspect ratio (2-15) colloidal chains, viz. magnetic/plasmonic oligomers, with tunable lengths were fabricated, affording a facile but an effective approach to modulate the optical properties of the chains. The scalable fabrication of well-aligned, linear colloidal polymers and oligomers opens up appealing opportunities for the development of sensors, subwavelength waveguides, optical tweezers, and enhanced solar harvesting devices.

Enhanced Catalytic Reduction of 4-Nitrophenol Driven by Fe₃O₄-Au Magnetic Nanocomposite Interface Engineering: From Facile Preparation to Recyclable Application

In this work, we report the enhanced catalytic reduction of 4-nitrophenol driven by Fe₃O₄-Au magnetic nanocomposite interface engineering. A facile solvothermal method is employed for Fe₃O₄ hollow microspheres and Fe₃O₄-Au magnetic nanocomposite synthesis via a seed deposition process. Complementary structural, chemical composition and valence state studies validate that the as-obtained samples are formed in a pure magnetite phase. A series of characterizations including conventional scanning/transmission electron microscopy (SEM/TEM), Mössbauer spectroscopy, magnetic testing and elemental mapping is conducted to unveil the structural and physical characteristics of the developed Fe₃O₄-Au magnetic nanocomposites. By adjusting the quantity of Au seeds coating on the polyethyleneimine-dithiocarbamates (PEI-DTC)-modified surfaces of Fe₃O₄ hollow microspheres, the correlation between the amount of Au seeds and the catalytic ability of Fe₃O₄-Au magnetic nanocomposites for 4-nitrophenol (4-NP) is investigated systematically. Importantly, bearing remarkable recyclable features, our developed Fe₃O₄-Au magnetic nanocomposites can be readily separated with a magnet. Such Fe₃O₄-Au magnetic nanocomposites shine the light on highly efficient catalysts for 4-NP reduction at the mass production level.

Tuning Plasmon Resonance in Magnetoplasmonic Nanochains by Controlling Polarization and Interparticle Distance for Simple Preparation of Optical Filters

Magnetoplasmonic Fe₃O₄-coated Ag nanoparticles (NPs) are assembled in large scale (18 × 18 mm²) in order to observe unique modulation of plasmonic coupling and optical tunable application via both external magnetic field and the combination of magnetic dipole and electrostatic interactions of particle-particle and particle-substrate. These large nanochains film exhibits outstanding tunability of plasmonic resonance from visible to near-infrared range by controlling the polarization angle and interparticle distance (IPD). The enormous spectral shift mainly originated from far-field rather than near-field coupling of Ag cores because of the sufficiently large separation between them in which Fe₃O₄ shell acts as spacer. This tunable magnetoplasmonic film can be applicable in the field of anisotropic optical waveguides, tunable optical filter, and nanoscale sensing platform.

In situ self-assembly of gold nanoparticles on hydrophilic and hydrophobic substrates for influenza virus-sensing platform

Nanomaterials without chemical linkers or physical interactions that reside on a two-dimensional surface are attractive because of their electronic, optical and catalytic properties. An in situ method has been developed to fabricate gold nanoparticle (Au NP) films on different substrates, regardless of whether they are hydrophilic or hydrophobic surfaces, including glass, 96-well polystyrene plates, and polydimethylsiloxane (PDMS). A mixture of sodium formate (HCOONa) and chloroauric acid (HAuCl₄) solution was used to prepare Au NP films at room temperature. An experimental study of the mechanism revealed that film formation is dependent on surface wettability and inter particle attraction. The as-fabricated Au NP films were further applied to the colorimetric detection of influenza virus. The response to the commercial target, New Caledonia/H1N1/1999 influenza virus, was linear in the range from 10 pg/ml to 10 μg/ml and limit of detection was 50.5 pg/ml. In the presence of clinically isolated influenza A virus (H3N2), the optical density of developed color was dependent on the virus concentration (10–50,000 PFU/ml). The limit of detection of this study was 24.3 PFU/ml, a limit 116 times lower than that of conventional ELISA (2824.3 PFU/ml). The sensitivity was also 500 times greater than that of commercial immunochromatography kits.

Hierarchical Self-Assembly of Cu7Te5 Nanorods into Superstructures with Enhanced SERS Performance

This paper reports a strategy to get self-assembly of Cu₇Te₅ nanorods into hierarchical superstructures: the side-by-side self-assembly of nanorods into microscale one-dimensional (1D) nanowires (primary structure), the side-by-side alignments of the 1D nanowires into two-dimensional (2D) nanowire bundles (secondary structure), and the further rolling up of the 2D bundles into three-dimensional (3D) microtubes (tertiary structure). It was found that the oleylamine (OLA)/n-dodecanethiol (DDT) mixture as a binary capping agent was key to produce Cu₇Te₅ nanorods in the quantum size regime with high monodispersity, and this was a prerequisite for their hierarchical self-assembly based on elaborate control of the solvent evaporation process. The obtained Cu₇Te₅ microtube superstructures were used as SERS substrate and showed much stronger SERS enhancement than the as-prepared Cu₇Te₅ nanorods before assembly. This was probably ascribed to the remarkably enhanced local electromagnetic field arising from the plasmon coupling of Cu₇Te₅ nanorods in the well-assembled superstructures.

Chain-like Fe3O4@resorcinol-formaldehyde resins–Ag composite microstructures: facile construction and applications in antibacterial and catalytic fields

Chain-like Fe₃O₄@RF–Ag microstructures with excellent antibacterial and catalytic activities were constructed by a simple two-step route.

Dual-Mode SERS-Fluorescence Immunoassay Using Graphene Quantum Dot Labeling on One-Dimensional Aligned Magnetoplasmonic Nanoparticles

A novel dual-mode immunoassay based on surface-enhanced Raman scattering (SERS) and fluorescence was designed using graphene quantum dot (GQD) labels to detect a tuberculosis (TB) antigen, CFP-10, via a newly developed sensing platform of linearly aligned magnetoplasmonic (MagPlas) nanoparticles (NPs). The GQDs were excellent bilabeling materials for simultaneous Raman scattering and photoluminescence (PL). The one-dimensional (1D) alignment of MagPlas NPs simplified the immunoassay process and enabled fast, enhanced signal transduction. With a sandwich-type immunoassay using dual-mode nanoprobes, both SERS signals and fluorescence images were recognized in a highly sensitive and selective manner with a detection limit of 0.0511 pg mL(-1).