Regenerable fluorescent nanosensors for monitoring and recovering metal ions based on photoactivatable monolayer self-assembly and host-guest interactions

Fluorescence detection of α-amylase based on a host-guest complex between a pyrene-derived amphiphile and γ-cyclodextrin

A fluorescence detection platform for α-amylase was developed by exploiting the host-guest inclusion complex formed between γ-cyclodextrin (γ-CD) and a pyrene-functionalized amphiphile (P10CG). Spectroscopic analysis revealed that the pyrene moiety was encapsulated within the γ-CD cavity in a 2:2 stoichiometric ratio, inducing characteristic excimer fluorescence. Upon enzymatic hydrolysis of γ-CD by α-amylase, the subsequent release of P10CG led to a marked decrease in excimer emission intensity. A quantitative linear relationship (R2 > 0.99) was observed between the monomer-to-excimer intensity ratio and α-amylase concentrations ranging from 1 to 5 U/mL, with a calculated detection limit of 0.135 U/mL (S/N = 3). The γ-CD/P10CG supramolecular system demonstrated satisfactory sensitivity and selectivity for α-amylase in both buffer solutions and diluted serum matrices, thus providing a potential sensing system for α-amylase in complex biological systems.

Simultaneous detection and removal of mercury (II) using multifunctional fluorescent materials

Environmental problems caused by mercury ions are increasing due to growing industrialization, poor enforcement, and inefficient pollutant treatment. Therefore, detecting and removing mercury from the ecological chain is of utmost significance. Currently, a wide range of small molecules and nanomaterials have made remarkable progress in the detection, detoxification, adsorption, and removal of mercury. In this review, we summarized the recent advances in the design and construction of multifunctional materials, detailed their sensing and removing mechanisms, and discussed with emphasis the advantages and disadvantages of different types of sensors. Finally, we elucidated the problems and challenges of current multifunctional materials and further pointed out the direction for the future development of related materials. This review is expected to provide a guideline for researchers to establish a robust strategy for the detection and removal of mercury ionsin the environment.

Current trends in the detection and removal of heavy metal ions using functional materials

The shortage of freshwater resources caused by heavy metal pollution is an acute global issue, which has a great impact on environmental protection and human health. Therefore, the exploitation of new strategies for designing and synthesizing green, efficient, and economical materials for the detection and removal of heavy metal ions is crucial. Among the various methods for the detection and removal of heavy ions, advanced functional systems including nanomaterials, polymers, porous materials, and biomaterials have attracted considerable attention over the past several years due to their capabilities of real-time detection, excellent removal efficiency, anti-interference, quick response, high selectivity, and low limit of detection. In this tutorial review, we review the general design principles underlying the aforementioned functional materials, and in particular highlight the fundamental mechanisms and specific examples of detecting and removing heavy metal ions. Additionally, the methods which enhance water purification quality using these functional materials have been reviewed, also current challenges and opportunities in this exciting field have been highlighted, including the fabrication, subsequent treatment, and potential future applications of such functional materials. We envision that this tutorial review will provide invaluable guidance for the design of functional materials tailored towards the detection and removal of heavy metals, thereby expediting the development of high-performance materials and fostering the development of more efficient approaches to water pollution remediation.

Application of nanomaterials decorated with cyclodextrins as sensing elements for environment analysis

Environmental pollution has brought adverse socio-economic consequences. Organic pollutants and heavy metals are the main culprits of environmental pollution. It is of great importance to develop novel, simple, rapid, sensitive, and low-cost detection approaches for sensing trace pollutants in environmental samples. A lot of detection strategies which are based on varieties of nanomaterials have been developed for environmental analysis in past decades. In this review, we retrospect a variety of nanomaterials decorated with cyclodextrins (CDs), including carbon nanomaterials decorated with CDs, noble metal nanomaterials decorated with CDs and other nanomaterials decorated with CDs, and their application in environmental analysis. CDs is a type of ideal modifying molecules which could recognize targets, improve the solubility and dispersibility of corresponding functionalized materials, and enhance the detecting performance of designed sensors. CDs have been widely immobilized to carbon nanomaterials, noble metal nanomaterials, phosphorene (BP) nanocomposites, metal organic framework (MOF), and magnetic nanomaterials, and these nanocomposites have been utilized as the sensing elements for different target analytes. Immobilizing CDs on different nanomaterials could extremely expand the development of new sensing systems for environmental analysis based on these materials, greatly broaden the species of sensing targets, and apparently improve their sensing performance. Herein, the nanomaterials decorated with CDs, as sensing elements for environmental analysis, were reviewed including the types of nanomaterials decorated with CDs and their applications in various sensing strategies for environmental analysis. Finally, the perspectives of the nanomaterials decorated with CDs used as sensing elements were also discussed.

Selective mercury(ii) detection in aqueous solutions upon the absorption changes corresponding to the transition moments polarized along the short axis of an azobenzene chemosensor

A completely water-soluble azobenzene chemosensor shows selective Hg²⁺ detection properties in wide pH ranges and under different light conditions.

Chemistry and engineering of cyclodextrins for molecular imaging

Cyclodextrins (CDs) are naturally occurring cyclic oligosaccharides bearing a basket-shaped topology with an "inner-outer" amphiphilic character. The abundance of hydroxyl groups enables CDs to be functionalized with multiple targeting ligands and imaging elements. The imaging time, and the payload of different imaging elements, can be tuned by taking advantage of the commercial availability of CDs with different sizes of the cavity. This review aims to offer an outlook of the chemistry and engineering of CDs for the development of molecular probes. Complexation thermodynamics of CDs, and the corresponding implications for probe design, are also presented with examples demonstrating the structural and physiochemical roles played by CDs in the full ambit of molecular imaging. We hope that this review not only offers a synopsis of the current development of CD-based molecular probes, but can also facilitate translation of the incremental advancements from the laboratory to real biomedical applications by illuminating opportunities and challenges for future research.

Practical Application of Aptamer-Based Biosensors in Detection of Low Molecular Weight Pollutants in Water Sources

Water pollution has become one of the leading causes of human health problems. Low molecular weight pollutants, even at trace concentrations in water sources, have aroused global attention due to their toxicity after long-time exposure. There is an increased demand for appropriate methods to detect these pollutants in aquatic systems. Aptamers, single-stranded DNA or RNA, have high affinity and specificity to each of their target molecule, similar to antigen-antibody interaction. Aptamers can be selected using a method called Systematic Evolution of Ligands by EXponential enrichment (SELEX). Recent years we have witnessed great progress in developing aptamer selection and aptamer-based sensors for low molecular weight pollutants in water sources, such as tap water, seawater, lake water, river water, as well as wastewater and its effluents. This review provides an overview of aptamer-based methods as a novel approach for detecting low molecular weight pollutants in water sources.

Supramolecular Host-Guest System as Ratiometric Fe3+ Ion Sensor Based on Water-Soluble Pillar[5]arene

Developing a specific, ratiometric, and reversible detection method for metal ions is significant to guard against the threat of metal-caused environmental pollution and organisms poisoning. Here a supramolecular host-guest system (WP5⊃G) based on water-soluble pillar[5]arene (WP5) and water-soluble quaternized perylene diimide derivative (G) was constructed. Morphological transformation was achieved during the process of adding WP5 into G aqueous solution, and a fluorescence "turn-off" phenomenon was observed which was caused by supramolecular photoinduced electron transfer (PET). Meanwhile, hydrophobic effect and electrostatic interaction played important roles in this supramolecular process, which was confirmed by isothermal titration calorimeter (ITC) and ζ potential experiments. Furthermore, the supramolecular host-guest system could be a "turn-on" fluorescent probe for Fe³⁺ ion detection through the process of interdicting supramolecular PET. Moreover, the Fe³⁺ ion detection showed specific, ratiometric, and reversible performances with a detection limit of 2.13 × 10^-7 M, which might have great potentials in biological and environmental monitoring.

Evidence of single-nanoparticle translocation through a solid-state nanopore by plasmon resonance energy transfer

This work proposes a gold nanoparticle (AuNP) based probe to study the single-nanoparticle translocation behavior through a silicon nitride (SiNx) solid-state nanopore. The AuNP probe is functionalized with a rhodamine derivative molecule, termed Rhod-DPA, whose fluorescence can be activated in the presence of Cu(2+) due to the binding between Rhod-DPA and Cu(2+). The Cu(2+) triggered configuration change of Rhod-DPA on the probe surface can induce the plasmon resonance energy transfer (PRET) from single AuNPs to the transformed fluorescent molecules, which can be detected by the color change of AuNP probes under dark-field microscopy (DFM) and their scattering spectra recorded on a spectrometer. By analyzing the peak shifts before and after the addition of Cu(2+), evidence of single nanoparticle translocation through the nanopore has been obtained, proving the successful establishment of the tracking strategy.

Smart adsorbents with reversible photo-regulated molecular switches for selective adsorption and efficient regeneration

A new class of adsorbents with reversible photo-regulated molecular switches was fabricated and simultaneously realized selective adsorption and efficient regeneration.