Aqueous-Processed Insulating Polymer/Nanocrystal Hybrid Solar Cells

Photon Recycling in Semiconductor Thin Films and Devices

Photon recycling (PR) plays an important role in the study of semiconductor materials and impacts the properties of their optoelectronic applications. However, PR has not been investigated comprehensively and it has not been demonstrated experimentally in many different kinds of semiconductor materials and devices. In this review paper, first, the authors introduce the background of PR and describe how this phenomenon was originally identified in semiconductors. Then, the theory and modelling of PR is reviewed and some of the important parameters that are used to quantify PR are highlighted. Next, a variety of the methods used to achieve and characterize PR in materials and devices are discussed. Examples of how the performance parameters of different types of optoelectronic devices are affected by PR are described. Finally, a summary of the roles of PR in semiconductor materials and devices and an outlook on how PR can be used to solve existing problems and challenges in the field of optoelectronics are provided. From this review, it is apparent that PR can have a positive impact on optoelectronic device performance, and that further in-depth theoretical and experimental studies are needed to rigorously demonstrate the advantages and importance of PR.

Function-driven engineering of 1D carbon nanotubes and 0D carbon dots: mechanism, properties and applications

Metal-free carbonaceous nanomaterials have witnessed a renaissance of interest due to the surge in the realm of nanotechnology. Among myriads of carbon-based nanostructures with versatile dimensionality, one-dimensional (1D) carbon nanotubes (CNTs) and zero-dimensional (0D) carbon dots (CDs) have grown into a research frontier in the past few decades. With extraordinary mechanical, thermal, electrical and optical properties, CNTs are utilized in transparent displays, quantum wires, field emission transistors, aerospace materials, etc. Although CNTs possess diverse characteristics, their most attractive property is their unique photoluminescence. On the other hand, another growing family of carbonaceous nanomaterials, which is CDs, has drawn much research attention due to its cost-effectiveness, low toxicity, environmental friendliness, fluorescence, luminescence and simplicity to be synthesized and functionalized with surface passivation. Benefiting from these unprecedented properties, CDs have been widely employed in biosensing, bioimaging, nanomedicine, and catalysis. Herein, we have systematically presented the fascinating properties, preparation methods and multitudinous applications of CNTs and CDs (including graphene quantum dots). We will discuss how CNTs and CDs have emerged as auspicious nanomaterials for potential applications, especially in electronics, sensors, bioimaging, wearable devices, batteries, supercapacitors, catalysis and light-emitting diodes (LEDs). Last but not least, this review is concluded with a summary, outlook and invigorating perspectives for future research horizons in this emerging platform of carbonaceous nanomaterials.

Manipulating Depletion Region of Aqueous-Processed Nanocrystals Solar Cells with Widened Fermi Level Offset

Water soluble nanocrystals (NCs) are promising materials in aqueous-processed solar cells because of their high extinction coefficient, low-cost, and favorable photoelectric characteristics. However, the power conversion efficiency (PCE) of the present aqueous-processed NC solar cells is restricted by the short depletion region of the active layer and limited Fermi level offset between NCs and the electron transport layer. Herein, these issues are effectively addressed by preparing Cd_x Zn_{1- x} Te NCs capped with 2-aminoethanethiol hydrochloride. The introduction of Zn²⁺ into CdTe NCs widens the Fermi level offset from 0.68 to 0.74 eV, lengthens the depletion region from 130 to 137 nm, and hence brings obvious improvement in the open circuit voltage (V_oc ) and fill factor. Especially, the depletion region is successfully tuned from 137 to 171 nm, and even lengthened to a record thickness of 200 nm based on aqueous-processed solar cells. As a result, a champion thickness ratio (74%) of depletion region to active layer (200/270 nm) is achieved. A champion PCE of 5.96% and short-circuit current (J_sc ) of 21.2 mA cm^-2 are achieved among aqueous-processed NC solar cells. This work provides a simple way to prepare polynary NCs and highlights a prospective method to develop more efficient and cost-effective solution-processed environment friendly solar cells.

Surface structure, optoelectronic properties and charge transport in ZnO nanocrystal/MDMO-PPV multilayer films

Blends of semiconducting nanocrystals and conjugated polymers continue to attract major research interest because of their potential applications in optoelectronic devices, such as solar cells, photodetectors and light-emitting diodes. In this study we investigate the surface structure, morphological and optoelectronic properties of multilayer films constructed from ZnO nanocrystals (NCs) and poly[2-methoxy-5-(3',7'-dimethyloctyloxy)-1,4-phenylenevinylene] (MDMO-PPV). The effects of layer number and ZnO concentration (C_ZnO) used on the multilayer film properties are investigated. An optimised solvent blend enabled well-controlled layers to be sequentially spin coated and the construction of multilayer films containing six ZnO NC (Z) and MDMO-PPV (M) layers (denoted as (ZM)₆). Contact angle data showed a strong dependence on C_ZnO and indicated distinct differences in the coverage of MDMO-PPV by the ZnO NCs. UV-visible spectroscopy showed that the MDMO-PPV absorption increased linearly with the number of layers in the films and demonstrates highly tuneable light absorption. Photoluminescence spectra showed reversible quenching as well as a surprising red-shift of the MDMO-PPV emission peak. Solar cells were constructed to probe vertical photo-generated charge transport. The measurements showed that (ZM)₆ devices prepared using C_ZnO = 14.0 mg mL^-1 had a remarkably high open circuit voltage of ∼800 mV. The device power conversion efficiency was similar to that of a control bilayer device prepared using a much thicker MDMO-PPV layer. The results of this study provide insight into the structure-optoelectronic property relationships of new semiconducting multilayer films which should also apply to other semiconducting NC/polymer combinations.

High-Efficiency Aqueous-Processed Polymer/CdTe Nanocrystals Planar Heterojunction Solar Cells with Optimized Band Alignment and Reduced Interfacial Charge Recombination

Aqueous-processed nanocrystal solar cells have attracted increasing attention due to the advantage of its environmentally friendly nature, which provides a promising approach for large-scale production. The urgent affair is boosting the power conversion efficiency (PCE) for further commercial applications. The low PCE is mainly attributed to the imperfect device structure, which leads to abundant nonradiative recombination at the interfaces. In this work, an environmentally friendly and efficient method is developed to improve the performance of aqueous-processed CdTe nanocrystal solar cells. Polymer/CdTe planar heterojunction solar cells (PHSCs) with optimized band alignment are constructed, which results in reduced interfacial charge recombination, enhanced carrier collection efficiency and built-in field. Finally, a champion PCE of 5.9%, which is a record for aqueous-processed solar cells based on CdTe nanocrystals, is achieved after optimizing the photovoltaic device.

Elemental Precursor Solution Processed (Cu1-xAgx)2ZnSn(S,Se)4 Photovoltaic Devices with over 10% Efficiency

The partial substitution of Cu⁺ with Ag⁺ into the host lattice of Cu₂ZnSn(S,Se)₄ thin films can reduce the open-circuit voltage deficit (V_oc,deficit) of Cu₂ZnSn(S,Se)₄ (CZTSSe) solar cells. In this paper, elemental Cu, Ag, Zn, Sn, S, and Se powders were dissolved in solvent mixture of 1,2-ethanedithiol (edtH₂) and 1,2-ethylenediamine (en) and used for the formation of (Cu_1-xAg_x)₂ZnSn(S,Se)₄ (CAZTSSe) thin films with different Ag/(Ag + Cu) ratios. The key feature of this approach is that the impurity atoms can be absolutely excluded. Further results indicate that the variations of grain size, band gap, and depletion width of the CAZTSSe layer are generally determined by Ag substitution content. Benefiting from the V_oc enhancement (∼50 mV), the power conversion efficiency is successfully increased from 7.39% (x = 0) to 10.36% (x = 3%), which is the highest efficiency of Ag substituted devices so far.

Self-Assembled Amphiphilic Block Copolymers/CdTe Nanocrystals for Efficient Aqueous-Processed Hybrid Solar Cells

Due to their low cost and high efficiency, polymer/nanocrystal hybrid solar cells (HSCs) have attracted much attention in recent years. In this work, water-soluble hybrid materials consisting of amphiphilic block copolymers (ABCPs) and cadmium telluride nanocrystals (CdTe NCs) were used as the active layer to fabricate the HSCs via aqueous processing. The ABCPs composed of poly(3-hexylthiophene) (P3HT) and poly(acrylic acid) (PAA) self-assembled into ordered nanostructured micelles which then transformed to nanowires by comicellization with P3HT additives. Furthermore, after annealing, the hybrid materials formed an interpenetrating network which resulted in a maximum power conversion efficiency of 4.8% in the HSCs. The properties of the hybrid materials and the film morphology were studied and correlated to the device performance. The results illustrate how the inclusion of ABCPs for directed assembly and homo-P3HT for charge transport and light absorption improves device performance. The aqueous-processed HSCs based on the ABCPs and NCs offer an effective method for the fabrication of efficient solar cells.

Constructing Post-Permeation Method to Fabricate Polymer/Nanocrystals Hybrid Solar Cells with PCE Exceeding 6

A post-permeation method is constructed for fabricating bulk-heterojunction hybrid solar cells. Porous CdTe film is prepared by annealing the mixture solution of aqueous CdTe nanocrystals and cetyltrimethyl ammonium bromide, after which the post-permeation of polymer is employed. By this method, kinds of polymers can be applied regardless of the intermiscibility with the nanoparticles. The inorganic nanocrystals and the polymer can be treated under respective optimized annealing temperatures, which can facilitate the growth of nanocrystals without damaging the polymers. A high power conversion efficiency of 6.36% in the polymer/nanocrystals hybrid solar cells is obtained via systematical optimization.