Tensiometric and Phase Domain Behavior of Lung Surfactant on Mucus-like Viscoelastic Hydrogels

Gels That Serve as Mucus Simulants: A Review

Mucus is a critical part of the human body's immune system that traps and carries away various particulates such as anthropogenic pollutants, pollen, viruses, etc. Various synthetic hydrogels have been developed to mimic mucus, using different polymers as their backbones. Common to these simulants is a three-dimensional gel network that is physically crosslinked and is capable of loosely entrapping water within. Two of the challenges in mimicking mucus using synthetic hydrogels include the need to mimic the rheological properties of the mucus and its ability to capture particulates (its adhesion mechanism). In this paper, we review the existing mucus simulants and discuss their rheological, adhesive, and tribological properties. We show that most, but not all, simulants indeed mimic the rheological properties of the mucus; like mucus, most hydrogel mucus simulants reviewed here demonstrated a higher storage modulus than its loss modulus, and their values are in the range of that found in mucus. However, only one mimics the adhesive properties of the mucus (which are critical for the ability of mucus to capture particulates), Polyvinyl alcohol-Borax hydrogel.

Meconium Aspiration Syndrome in Animal Models: Inflammatory Process, Apoptosis, and Surfactant Inactivation

Meconium Aspiration Syndrome is a condition that causes respiratory distress in newborns due to occlusion and airway inflammation, and surfactant inactivation by meconium. This condition has been described in animal species such as canids, sheep, cattle, horses, pigs, and marine mammals. In its pathogenesis, the pulmonary epithelium activates a limited inflammatory response initiated by cytokines causing leukocyte chemotaxis, inhibition of phagocytosis, and pathogen destruction. Likewise, cytokines release participates in the apoptosis processes of pneumocytes due to the interaction of angiotensin with cytokines and the caspase pathway. Due to these reactions, the prevalent signs are lung injury, hypoxia, acidosis, and pneumonia with susceptibility to infection. Given the importance of the pathophysiological mechanism of meconium aspiration syndrome, this review aims to discuss the relevance of the syndrome in veterinary medicine. The inflammatory processes caused by meconium aspiration in animal models will be analyzed, and the cellular apoptosis and biochemical processes of pulmonary surfactant inactivation will be discussed.

Models using native tracheobronchial mucus in the context of pulmonary drug delivery research: Composition, structure and barrier properties

Mucus covers all wet epithelia and acts as a protective barrier. In the airways of the lungs, the viscoelastic mucus meshwork entraps and clears inhaled materials and efficiently removes them by mucociliary escalation. In addition to physical and chemical interaction mechanisms, the role of macromolecular glycoproteins (mucins) and antimicrobial constituents in innate immune defense are receiving increasing attention. Collectively, mucus displays a major barrier for inhaled aerosols, also including therapeutics. This review discusses the origin and composition of tracheobronchial mucus in relation to its (barrier) function, as well as some pathophysiological changes in the context of pulmonary diseases. Mucus models that contemplate key features such as elastic-dominant rheology, composition, filtering mechanisms and microbial interactions are critically reviewed in the context of health and disease considering different collection methods of native human pulmonary mucus. Finally, the prerequisites towards a standardization of mucus models in a regulatory context and their role in drug delivery research are addressed.

The Past and the Future of Langmuir and Langmuir-Blodgett Films

The Langmuir-Blodgett (LB) technique, through which monolayers are transferred from the air/water interface onto a solid substrate, was the first method to allow for the controlled assembly of organic molecules. With its almost 100 year history, it has been the inspiration for most methods to functionalize surfaces and produce nanocoatings, in addition to serving to explore concepts in molecular electronics and nanoarchitectonics. This paper provides an overview of the history of Langmuir monolayers and LB films, including the potential use in devices and a discussion on why LB films are seldom considered for practical applications today. Emphasis is then given to two areas where these films offer unique opportunities, namely, in mimicking cell membrane models and exploiting nanoarchitectonics concepts to produce sensors, investigate molecular recognitions, and assemble molecular machines. The most promising topics for the short- and long-term prospects of the LB technique are also highlighted.

Interactions of Crosslinked Polyacrylic Acid Polyelectrolyte Gels with Nonionic and Ionic Surfactants

The morphology and stability of surfactant-loaded polyelectrolyte gels are of great interest for a variety of personal care, cosmetic, and pharmaceutical products. However, the mechanisms of surfactant interactions with gel-forming polymers are poorly understood and experimentally challenging. The aim of this work is to explore in silico the specifics of surfactant absorption within polyelectrolyte gels drawing on the examples of typical non-ionic octaethylene glycol monooctyl ether (C₈E₈) and anionic sodium dodecyl sulfate (SDS) surfactants and polyacrylic acid modified with hydrophobic sidechains mimicking the practically important Carbopol polymer. Using the systematically parameterized coarse-grained dissipative particle dynamics models, we generate and characterize the equilibrium conformations and swelling of the polymer films in aqueous solutions with the surfactant concentrations varied up to the critical micelle concentration (cmc). We discover the striking difference in interactions of Carbopol-like polymers with nonionic and ionic surfactants under mildly acidic conditions. The sorption of C₈E₈ within the polymer film is found substantial. As the surfactant concentration increases, the polymer film swells and, close to cmc, becomes unstable due to the formation and growth of water pockets filled with surfactant micelles. Sorption of SDS at the same bulk concentrations is found much lower, with only about 1% of surfactant mass fraction achieved at cmc. As the SDS concentration increases further, a lamellae structure is formed within the film, which remains stable. Reduced swelling and higher stability indicate better prospects of using SDS-type surfactants with Carbopol-based gels in formulations for detergents and personal care products.

An innovative next-generation endoscopic submucosal injection material with a 2-step injection system (with video)

BACKGROUND AND AIMS

Next-generation submucosal injection materials (SIMs) with higher performance and flexibility than the current SIMs (eg, 0.4% sodium hyaluronate solution [HA]) are expected to improve the outcomes of endoscopic submucosal dissection (ESD) but are difficult to develop. We developed a next-generation SIM by devising a 2-solution-type SIM comprising 2.0% calcium chloride solution (Ca) and 0.4% sodium alginate solution (SA) and evaluated its performance.

METHODS

Viscoelasticity, submucosal elevation height, and injection pressure of HA, SA, and the next-generation SIM were measured. Outcomes of ESDs on pseudo-lesions in ex vivo porcine stomach/colon models were compared.

RESULTS

The dramatic increase in SA viscoelasticity with the addition of Ca facilitated the formation of highly viscous submucosal cushions that can be controlled by endoscopists. The submucosal elevation height of the next-generation SIM was significantly higher than that of HA or SA with the same injection pressure. The ESD procedure time using the next-generation SIM was significantly shorter than that using HA or SA (14.2 ± 6.1 vs 29.2 ± 9.1 minutes, P = .0004, or 14.2 ± 6.1 vs 29.1 ± 5.9 minutes, P <.0001). Furthermore, the total injection volume for the next-generation SIM was considerably lower than that for HA or SA (7.0 ± 0.9 vs 17.2 ± 3.4 mL, P <.0001, or 7.0 ± 0.9 vs 16.2 ± 2.9 mL, P <.0001).

CONCLUSIONS

We developed an ideal next-generation SIM that achieved high performance and high flexibility in ex vivo models. Our findings warrant further investigations in a patient population.

Phosphatidylglycerol and surfactant: A potential treatment for COVID-19?

A hypothesis concerning the potential utility of surfactant supplementation for the treatment of critically ill patients with COVID-19 is proposed, along with a brief summary of the data in the literature supporting this idea. It is thought that surfactant, which is already approved by the Food and Drug Administration for intratracheal administration to treat neonatal respiratory distress syndrome in pre-term infants, could benefit COVID-19-infected individuals by: (1) restoring surfactant damaged by lung infection and/or decreased due to the virus-induced death of the type II pneumocytes that produce it and (2) reducing surface tension to decrease the work of breathing and limit pulmonary edema. In addition, a constituent of surfactant, phosphatidylglycerol, could mitigate COVID-19-induced lung pathology by: (3) decreasing excessive innate immune system stimulation via its inhibition of toll-like receptor-2 and -4 activation by microbial components and cellular proteins released by damaged cells, thereby limiting inflammation and the resultant pulmonary edema, and (4) possibly blocking spread of the viral infection to non-infected cells in the lung. Therefore, it is suggested that surfactant preparations containing phosphatidylglycerol be tested for their ability to improve lung function in critically ill patients with COVID-19.

Surfactant-induced spreading of nanoparticles is inhibited on mucus mimetic surfaces that model native lung conditions

We investigated the ability of surfactant-induced spreading to promote nanoparticle distribution on model mucus hydrogels. The hydrogels were formulated with viscoelastic properties and surface tensions that match those of native lung mucus. Nanoparticle-containing droplets with or without surfactant were deposited on the mucus surface and spreading patterns were monitored by time-course fluorescence imaging. Overall, surfactant-induced spreading of nanoparticles required an appropriate balance between Marangoni forces and viscoelastic subphase resistance. Spreading was enhanced on bare gels by increasing the concentration of surfactant in the droplets or reducing the viscoelastic properties of the subphase. However, with a pre-existing film of pulmonary surfactant on the mucus surface, spreading was dramatically inhibited as the surface tension gradient between the droplets and the surrounding subphase decreased. A complete lack of spreading was observed at surface tensions that matched those in the tracheobronchial region of the lungs, even with full-concentration Infasurf. These studies demonstrate that the magnitude of spreading on lung mucus-like surfaces is limited by native mucosal properties.

Investigation of Migration-Preventing Tracheal Stent with High Dose of 5-Fluorouracil or Paclitaxel for Local Drug Delivery

Stent migration is one of the common reasons for the failure of tracheal stent. An antitumor drug/tracheal stent combination can promptly relieve dyspnea caused by tracheal stenosis and locally treat malignant occupying lesion or tumor. To prevent stent migration for more effective treatment, we prepared a migration-preventing nitinol tracheal stent (TS) with a high dose of 5-fluorouracil or paclitaxel (5-FU/TS or PTX/TS) by stent surface coating with a bilayered film, which is composed of a drug-loaded layer containing Carbopol 974P as mucoadhesive matrix and a blank Carbopol 974P layer. The resulting stent had a similar mechanical performance with the nitinol tracheal stent itself. The bilayered film containing 30% PTX (PTX30) could keep adhesion to porcine mucosa for 221.7 ± 11.4 min in PBS at a stirring speed of 150 rpm, and the corresponding PTX30/TS was difficult to be moved in the porcine tracheal lumen with a pulling force less than 0.7 N, indicating its good migration-preventing ability. The migration-preventing ability of the 5-FU/TS or PTX/TS was related to the compositions of bilayered films. The 5-FU release from the 5-FU/TS was dominated by a relaxation mechanism, while the PTX release was mainly controlled by a diffusion mechanism. Moreover, the 5-FU permeation from the 5-FU loaded film through the porcine tracheal mucosa was determined by the 5-FU dissolution, and PTX permeation was limited by the trans-mucosa process. After the deployment of PTX30/TS, inflammatory responses were observed in the rabbit tracheas and gradually alleviated during the follow-up period.

Nanometric Surface Oscillation Spectroscopy of Water-Poor Microemulsions

Selectively exchanging metal complexes between emulsified water-poor microemulsions and concentrated solutions of mixed electrolytes is the core technology for strategic metal recycling. Nanostructuration triggered by solutes present in the organic phase is understood, but little is known about fluctuations of the microemulsion-water interface. We use here a modified version of an optoelectric device initially designed for air bubbles, in order to evidence resonant electrically induced surface waves of an oily droplet suspended in an aqueous phase. Resonant waves of nanometer amplitude of a millimeter-sized microemulsion droplet containing a common ion-specific extractant diluted by dodecane and suspended in a solution of rare earth nitrate are evidenced for the first time with low excitation fields (5 V/cm). From variation of the surface wave spectrum with rare earth concentration, we evidence uptake of rare-earth ions at the interface and at higher concentration the formation of a thin "crust" of liquid crystal forming at unusually low concentration, indicative of a surface induced phase transition. The effect of the liquid crystal structure on the resonance spectrum is backed up by a model, which is used to estimate crust thickness.

Efficient Interfacially Driven Vehiculization of Corticosteroids by Pulmonary Surfactant

Pulmonary surfactant is a crucial system to stabilize the respiratory air-liquid interface. Furthermore, pulmonary surfactant has been proposed as an effective method for targeting drugs to the lungs. However, few studies have examined in detail the mechanisms of incorporation of drugs into surfactant, the impact of the presence of drugs on pulmonary surfactant performance at the interface under physiologically meaningful conditions, or the ability of pulmonary surfactant to use the air-liquid interface to vehiculise drugs to long distances. This study focuses on the ability of pulmonary surfactant to interfacially vehiculize corticosteroids such as beclomethasone dipropionate (BDP) or Budesonide (BUD) as model drugs. The main objectives have been to (a) characterize the incorporation of corticosteroids into natural and synthetic surfactants, (b) evaluate whether the presence of corticosteroids affects surfactant functionality, and (c) determine whether surfactant preparations enable the efficient spreading and distribution of BDP and BUD along the air-liquid interface. We have compared the performance of a purified surfactant from porcine lungs and two clinical surfactants: Poractant alfa, a natural surfactant of animal origin extensively used to treat premature babies, and CHF5633, a new synthetic surfactant preparation currently under clinical trials. Both, natural and clinical surfactants spontaneously incorporated corticosteroids up to at least 10% by mass with respect to phospholipid content. The presence of the drugs did not interfere with their ability to efficiently adsorb into air-liquid interfaces and form surface active films able to reach and sustain very low surface tensions (<2 mN/m) under compression-expansion cycling mimicking breathing dynamics. Furthermore, the combination of clinical surfactant with corticosteroids efficiently promoted the active diffusion of the drug to long distances along the air-liquid interface. This effect could not be mimicked by vehiculisation of corticosteroids in liposomes or in micellar emulsions similar to the formulations currently in use to deliver anti-inflammatory corticosteroids through inhalation.

Thermo-physical properties of synthetic mucus for the study of airway clearance

In this article, dynamic viscosity, surface tension, density, heat capacity and thermal conductivity, of a bronchial mucus simulant proposed by Zahm et al., Eur Respir J 1991; 4: 311-315 were experiementally determined. This simulant is mainly composed of a galactomannan gum and a scleroglucan. It was shown that thermophysical properties of synthetic mucus are dependant of scleroglucan concentrations. More importantly and for some scleroglucan concentrations, the syntetic mucus, exhibits, somehow, comparable thermophysical properties to real bronchial mucus. An insight on the microstructure of this simulant is proposed and the different properties enounced previously have been measured for various scleroglucan concentrations and over a certain range of operating temperatures. This synthetic mucus is found to mimic well the rheological behavior and the surface tension of real mucus for different pathologies. Density and thermal properties have been measured for the first time. © 2017 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 105A: 3025-3033, 2017.