High-Performance Electrochromic Devices Based on Poly[Ni(salen)]-Type Polymer Films

A Soluble ProDOT-Based Polymer and Its Electrochromic Device with Yellow-to-Green Color Switching Towards Camouflage Application

Yellow-to-green electrochromic color switching plays a key role in the intelligent adaptive camouflage under the visible light environment in future military camouflage applications. Here, we designed and synthesized a soluble electrochromic conjugated pDPTD polymer, mainly based on perylo[1,12-bcd]thiophene and the novel ProDOT groups. The pDPTD polymer displayed a yellow-to-green electrochromism with large optical contrast and fast switching times. Based on the pDPTD polymer film, a yellow-to-green electrochromic device was achieved, showing an orange-yellow color at -0.4 V with L*a*b* color coordinates of 88.5, 18.5, and 34.2 and a pale green color at 0.7 V with L*a*b* color coordinates of 85.6, -4.8, and 11.5, together with a large optical contrast of 43.5% and fast switching times of 2.4/3.2 s. These results indicated that the pDPTD polymer could serve as a potential electrochromic material for yellow/green system camouflage applications.

Harmonizing Energies: The Interplay Between a Nonplanar SalEn-Type Molecule and a TEMPO Moiety in a New Hybrid Energy-Storing Redox-Conducting Polymer

Redox-conducting polymers based on SalEn-type complexes have attracted considerable attention due to their potential applications in electrochemical devices. However, their charge transfer mechanisms, physical and electrochemical properties remain unclear, hindering their rational design and optimization. This study aims to establish the influence of monomer geometry on the polymer's properties by investigating the properties of novel nonplanar SalEn-type complexes, poly[N,N'-bis(salicylidene)propylene-2-(hydroxy)diaminonickel(II)], and its analog with 2,2,6,6-tetramethylpiperidinyl-N-oxyl (TEMPO)-substituted bridge (MTS). To elucidate the charge transfer mechanism, operando UV-Vis spectroelectrochemical analysis, electrochemical impedance spectroscopy, and electron paramagnetic resonance are employed. Introducing TEMPO into the bridge moiety enhanced the specific capacity of the poly(MTS) material to 95 mA h g-1, attributed to TEMPO's and conductive backbone's charge storage capabilities. Replacement of the ethylenediimino-bridge with a 1,3-propylenediimino- bridge induced significant changes in the complex geometry and material's morphology, electrochemical, and spectral properties. At nearly the same potential, polaron and bipolaron particles emerged, suggesting intriguing features at the overlap point of the electroactivity potentials ranges of polaron-bipolaron and TEMPO, such as a disruption in the connection between TEMPO and the conjugation chain or intramolecular charge transfer. These results offer valuable insights for optimizing strategies to create organic materials with tailored properties for use in catalysis and battery applications.

Tuning the Charge Transport in Nickel Salicylaldimine Polymers by the Ligand Structure

The conductivity of the polymeric energy storage materials is the key factor limiting their performance. Conductivity of polymeric NiSalen materials, a prospective class of energy storage materials, was found to depend strongly on the length of the bridge between the nitrogen atoms of the ligand. Polymers obtained from the complexes containing C₃ alkyl and hydroxyalkyl bridges showed an electrical conductivity one order of magnitude lower than those derived from more common complexes with C₂ alkyl bridges. The observed difference was studied by means of cyclic voltammetry on interdigitated electrodes and operando spectroelectrochemistry, combined with density functional theory (DFT) calculations.

Ni(OH)2-Type Nanoparticles Derived from Ni Salen Polymers: Structural Design toward Functional Materials for Improved Electrocatalytic Performance

Herein, we report the potential-driven electrochemical transformation carried out in basic media of two Ni2+ salen polymers, (poly(NiSalen)s), abbreviated as poly(meso-NiSaldMe) and poly(NiSaltMe). These two polymers, with different configurations of methyl substituents on the imine bridge, were used as precursors for the preparation of electrocatalytically active nickel hydroxide [Ni(OH)2]-type nanoparticles (NPs) anchored in the polymeric matrix as poly[SalenNi(OH)2]. The use of potentiodynamic and potentiostatic electropolymerization conditions for the deposition of polymeric precursors allowed us to control the molecular architecture of poly(NiSalen)s and NPs derived from them. Thus, we obtained different arrangements of NPs embedded in morphologically different poly(Salen) matrixes, indicating their electrocatalytic activity toward ethanol to different extents. Moreover, we found a direct relationship between the electrochemical stability of the poly(NiSalen) precursors operating in the organic solvent-based electrolyte solutions and the easiness of their transformation into Ni(OH)2 NPs operating in the aqueous alkaline media. Poly(NiSalen)s and Ni(OH)2-type NPs were characterized by X-ray photoelectron spectroscopy, scanning electron microscopy, and transmission electron microscopy.

Reversible Redox Processes in Polymer of Unmetalated Salen-Type Ligand: Combined Electrochemical in Situ Studies and Direct Comparison with Corresponding Nickel Metallopolymer

Most non-metalized Salen-type ligands form passivation thin films on electrode surfaces upon electrochemical oxidation. In contrast, the H₂(3-MeOSalen) forms electroactive polymer films similarly to the corresponding nickel complex. There are no details of electrochemistry, doping mechanism and charge transfer pathways in the polymers of pristine Salen-type ligands. We studied a previously uncharacterized electrochemically active polymer of a Salen-type ligand H₂(3-MeOSalen) by a combination of cyclic voltammetry, in situ ultraviolet-visible (UV-VIS) spectroelectrochemistry, in situ electrochemical quartz crystal microbalance and Fourier Transform infrared spectroscopy (FTIR) spectroscopy. By directly comparing it with the polymer of a Salen-type nickel complex poly-Ni(3-MeOSalen) we elucidate the effect of the central metal atom on the structure and charge transport properties of the electrochemically doped polymer films. We have shown that the mechanism of charge transfer in the polymeric ligand poly-H₂(3-MeOSalen) are markedly different from the corresponding polymeric nickel complex. Due to deviation from planarity of N₂O₂ sphere for the ligand H₂(3-MeOSalen), the main pathway of electron transfer in the polymer film poly-H₂(3-MeOSalen) is between π-stacked structures (the π-electronic systems of phenyl rings are packed face-to-face) and C-C bonded phenyl rings. The main way of electron transfer in the polymer film poly-Ni(3-MeOSalen) is along the polymer chain, while redox processes are ligand-based.

Toward Electrochromic Metallopolymers: Synthesis and Properties of Polyazomethines Based on Complexes of Transition-Metal Ions

The tridentate ligand L and its complexes with transition-metal ions have been prepared and characterized. The polycondensation reactions of transition-metal complexes with different dialdehydes led to the formation of transition-metal-complex-based polyazomethines, which have been obtained by on-substrate polymerization, and their electrochemical and electrochromic performance have been investigated. The most interesting properties are exhibited by polymers of Fe(II) and Cu(II) ions obtained by the reaction of the appropriate complexes with a triphenylamine-based dialdehyde. Fe(II) polymer P1 undergoes a reversible oxidation/reduction process and a color change from orange to gray due to the oxidation of Fe(II) to Fe(III) ions concomitant with the oxidation of the triphenylamine group. Its electrochromic properties such as long-term stability, switching times, and coloration efficiencies have been investigated, providing evidence of the utility of the on-substrate polycondensation reaction in the formation of thin films of electrochromic metallopolymers.

A Novel Cobalt Metallopolymer with Redox-Matched Conjugated Organic Backbone via Electropolymerization of a Readily Available N4 Cobalt Complex

Fast and reversible cobalt-centered redox reactions in metallopolymers are the key to using these materials in energy storage, electrocatalytic, and sensing applications. Metal-centered electrochemical activity can be enhanced via redox matching of the conjugated organic backbone and cobalt centers. In this study, we present a novel approach to redox matching via modification of the cobalt coordination site: a conductive electrochemically active polymer was electro-synthesized from [Co(Amben)] complex (Amben = N,N′-bis(o-aminobenzylidene)ethylenediamine) for the first time. The poly-[Co(Amben)] films were investigated by cyclic voltammetry, electrochemical quartz crystal microbalance (EQCM), in situ UV-vis-NIR spectroelectrochemistry, and in situ conductance measurements between −0.9 and 1.3 V vs. Ag/Ag⁺. The polymer displayed multistep redox processes involving reversible transfer of the total of 1.25 electrons per repeat unit. The findings indicate consecutive formation of three redox states during reversible electrochemical oxidation of the polymer film, which were identified as benzidine radical cations, Co(III) ions, and benzidine di-cations. The Co(II)/Co(III) redox switching is retained in the thick polymer films because it occurs at potentials of high polymer conductivity due to the optimum redox matching of the Co(II)/Co(III) redox pair with the organic conjugated backbone. It makes poly-[Co(Amben)] suitable for various practical applications based on cobalt-mediated redox reactions.

Electronic structure of the [Ni(Salen)] complex studied by core-level spectroscopies

The nature and structure of occupied and empty valence electronic states (molecular orbitals, MOs) of the [Ni(Salen)] molecular complex (NiO2N2C16H14) have been studied by X-ray photoemission and absorption spectroscopy combined with density functional theory (DFT) calculations. As a result, the composition of the high-lying occupied and low-lying unoccupied electronic states has been identified. In particular, the highest occupied molecular orbital (HOMO) of the complex is found to be predominantly located on the phenyl rings of the salen ligand, while the states associated with the occupied Ni 3d-derived molecular orbitals (MOs) are at higher binding energies. The lowest unoccupied molecular orbital (LUMO) is also located on the salen ligand and is formed by the 2pπ orbitals of carbon atoms in phenyl groups of the salen macrocycle. The unoccupied MOs above the LUMO reflect σ- and π-bonding between Ni and its nearest neighbours. All valence states have highly mixed character. The specific nature of the unoccupied Ni 3d-derived σ-MO is a consequence of donor-acceptor chemical bonding in [Ni(Salen)].

Yellow-to-brown and yellow-to-green electrochromic devices based on complexes of transition metal ions with a triphenylamine-based ligand

Transmissive-to-colored electrochromism has been achieved by combination of MLCT of transition metal complexes with the electrochromic properties of ligand molecules. The color transitions were from yellow to dark brown for the Fe(ii) complex, yellow to orange to bluish-green for the Co(ii) complex and yellow to green for the Zn(ii) complex. By using a metal ion-ligand coordination approach, the self-assembly of hydrazone-based ligands containing a triphenylamine group with appropriate metal salts (FeCl2, Co(ClO4)2 and Zn(BF4)2) produced novel complexes of the general formula [ML2]X2. The isolated complexes were characterized by spectroscopic methods, and the Co(ii) complex also by X-ray diffraction analysis. Thin films of the complexes have been obtained by a spray-coating method and they were used in the construction of electrochromic devices, which showed good electrochromic stability, a high color contrast of 47.5% for Fe(ii), 37.2% for Co(ii) and 33.7% for Zn(ii) complexes and fast coloring and bleaching times.

Redox-conducting polymers based on metal-salen complexes for energy storage applications

Metal-salen polymers are electrochemically active metallopolymers functionalized with multiple redox centers, with a potential for high performance in various fields such as heterogeneous catalysis, chemical sensors, energy conversion, saving, and storage. In light of the growing world demand for the development of superior energy storage systems, the prospects of employing these polymers for advancing the performance of supercapacitors and lithium-ion batteries are particularly interesting. This article provides a general overview of the results of investigating key structure-property relationships of metal-salen polymers and using them to design polymer-modified electrodes with improved energy storage characteristics. The results of independent and collaborative studies conducted by the members of two research groups currently affiliated to the Saint–Petersburg State University and the Ioffe Institute, respectively, along with the related data from other studies are presented in this review.

Electrocatalytic Oxidation of Methanol, Ethanol, and Glycerol on Ni(OH)2 Nanoparticles Encapsulated with Poly[Ni(salen)] Film

This study describes a systematic investigation of the electrocatalytic activity of poly[Ni(salen)] films, as catalysts for the electro-oxidation of Cn alcohols (Cn = methanol, ethanol, and glycerol) in alkaline medium. The [Ni(salen)] complex was electropolymerized on a glassy carbon surface and electrochemically activated in NaOH solution by cyclic voltammetry. X-ray diffraction, transmission electron microscopy, and X-ray photoelectron spectroscopy results indicate that during the activation step the polymeric film hydrolyzes, leading to the formation of β-Ni(OH)₂ spherical nanoparticles, with an average size of 2.4 ± 0.5 nm, encapsulated with the poly[Ni(salen)] film. Electrochemical results obtained together with the in situ Fourier transform infrared spectroscopy confirm that the electro-oxidation of methanol, ethanol, and glycerol occurs by involving a cycling oxidation of β-Ni(OH)₂ with the formation of β-NiOOH species, followed by the charge transfer to the alcohols, which regenerates β-Ni(OH)₂. Analyses of the oxidation products at low potentials indicate that the major product obtained during the oxidation of methanol and glycerol is the formate, while the oxidation of ethanol leads to the formation of acetate. On the other hand, at high potentials (E = 0.6 V), there is evidence that the oxidation of Cn alcohols leads to carbonate ions as an important product.

Ce-Doped bundled ultrafine diameter tungsten oxide nanowires with enhanced electrochromic performance

Cerium (Ce)-doped tungsten oxide nanostructures were synthesised using a simple solvothermal method from cerium chloride salt (CeCl₃·7H₂O) and tungsten hexachloride (WCl₆) precursors. The as-prepared samples were thoroughly characterised using electron microscopies, X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS) and Raman spectroscopy. The electrochromic performance of different samples was evaluated using a custom-built UV-VIS spectrometer and an electrochemistry technique. The results showed that the as-prepared samples underwent morphological evolution with the increase in the Ce/W molar ratio, from long, thin and bundled nanowires, through shorter and thicker nanowires to mixed nanowire bundles and nanoparticle agglomerates. From electrochemical testing, we found that the Ce-doped tungsten oxides exhibited higher optical contrasts of 44.3%, 49.7% and 39.4% for the 1 : 15, 1 : 10 and 1 : 5 Ce/W ratios respectively, compared with 37.4% for the pure W₁₈O₄₉ nanowires. The Ce/W = 1 : 15 samples presented an improved colouration efficiency of 67.3 cm² C^-1 against 62 cm² C^-1 for pure W₁₈O₄₉. This work demonstrated that the Ce-doped W₁₈O₄₉ nanowires are very promising candidate materials for the design and construction of electrochemical chromic devices with largely improved efficiency, contrast and stability. The results from this work suggested that smart electrochromic devices based on current Ce-doped WO_x nanomaterials could be further developed for future energy-related applications.

Varying structural motifs, unusual X-band electron paramagnetic spectra, DFT studies and superoxide dismutase enzymatic activity of copper(ii) complexes with N′-[(E)-phenyl(pyridin-2-yl)methylidene]benzohydrazide

A diverse set of new copper(ii) complexes synthesized as possible models for antioxidant superoxide dismutase mimics.

Preparation, Characterization, and Electrochromic Properties of Nanocellulose-Based Polyaniline Nanocomposite Films

On the basis of nanocellulose obtained by acidic swelling and ultrasonication, rodlike nanocellulose/polyaniline nanocomposites with a core-shell structure have been prepared via in situ polymerization. Compared to pure polyaniline, the nanocomposites show superior film-forming properties, and the prepared nanocomposite films demonstrate excellent electrochemical and electrochromic properties in electrolyte solution. Nanocomposite films, especially the one prepared with 40% polyaniline coated nanocomposite, exhibited faster response time (1.5 s for bleaching and 1.0 s for coloring), higher optical contrast (62.9%), higher coloration efficiency (206.2 cm²/C), and more remarkable switching stability (over 500 cycles). These novel nanocellulose-based nanorod network films are promising novel electrochromic materials with excellent properties.

Water-stable [Ni(salen)]-type electrode material based on phenylazosubstituted salicylic aldehyde imine ligand

We have synthesized a new water-stable [Ni(salen)]-type electrode material, which was found to be a stacked polymer due to the presence of substituents, preventing oxidative coupling of the phenyl rings.

A Thiophene-Containing Conductive Metallopolymer Using an Fe(II) Bis(terpyridine) Core for Electrochromic Materials

Three Fe(II) bis(terpyridine)-based complexes with thiophene (Fe(L1)₂), bithiophene (Fe(L2)₂), and 3,4-ethylenedioxythiophene (Fe(L3)₂) side chains were designed and synthesized for the purpose of providing two terminal active sites for electrochemical polymerization. The corresponding metallopolymers (poly-Fe(Ln)₂, n = 2 or 3) were synthesized on indium tin oxide (ITO)-coated glass substrates via oxidative electropolymerization of the thiophene-substituted monomers and characterized using electrochemistry, X-ray photoelectron spectroscopy, UV-vis spectroscopy, and atomic force microscopy. The film poly-Fe(L2)₂ was further studied for electrochromic (EC) color-switching properties and fabricated into a solid-state EC device. Poly-Fe(L2)₂ films exhibit an intense MLCT absorption band at 596 nm (ε = 4.7 × 10⁴ M^-1 cm^-1) in the UV-vis spectra without any applied voltage. Upon application of low potentials (between 1.1 and 0.4 V vs Fc⁺/Fc), the obtained electropolymerized film exhibited great contrast with a change of transmittance percentage (ΔT%) of 40% and a high coloration efficiency of 3823 cm² C^-1 with a switching time of 1 s. The film demonstrates commonplace stability and reversibility with a 10% loss in peak current intensity after 200 cyclic voltammetry cycles and almost no loss in change of transmittance (ΔT%) after 900 potential switches between 1.1 and 0.4 V (vs Fc⁺/Fc) with a time interval of 0.75 s. The electropolymerization of Fe(L2)₂ provides convenient and controllable film fabrication. Electrochromic behavior was also achieved in a solid-state device composed of a poly-Fe(L2)₂ film and a polymer-supported electrolyte sandwiched between two ITO-coated glass electrodes.

Varying structural motifs in the salen based metal complexes of Co(ii), Ni(ii) and Cu(ii): synthesis, crystal structures, molecular dynamics and biological activities

Four new metal complexes which demonstrates varying structural motifs from monomeric to dimeric to tetrameric complexes by slightly altering the reaction conditions and their biological applications.