Dual-Cross-Linked Methacrylated Alginate Sub-Microspheres for Intracellular Chemotherapeutic Delivery

Dual growth factor methacrylic alginate microgels combined with chitosan-based conduits facilitate peripheral nerve repair

Treating severe peripheral nerve injuries is difficult. Nerve repair with conduit small gap tubulization is a treatment option but still needs to be improved. This study aimed to assess the use of microgels containing growth factors, along with chitosan-based conduits, for repairing nerves. Using the water-oil emulsion technique, microgels of methacrylic alginate (AlgMA) that contained vascular endothelial growth factor (VEGF) and brain-derived neurotrophic factor (BDNF) were prepared. The effects on rat Schwann cells (RSC96) and human umbilical vein endothelial cells (HUVECs) were evaluated. Chitosan-based conduits were fabricated and used in conjunction with microgels containing two growth factors to treat complete neurotmesis in rats. The results showed that the utilization of dual growth factor microgels improved the migration and decreased the apoptosis of RSC96 cells while promoting the growth and formation of tubes in HUVECs. The utilization of dual growth factor microgels and chitosan-based conduits resulted in notable advancements in the regeneration and myelination of nerve fibers, recovery of neurons, alleviation of muscle atrophy and recovery of neuromotor function and nerve conduction. In conclusion, the use of dual growth factor AlgMA microgels in combination with chitosan-based conduits has the potential to significantly improve the effectiveness of nerve repair.

Whey Protein Isolate Composites as Potential Scaffolds for Cultivated Meat

Modern food technology has given rise to numerous alternative protein sources in response to a growing human population and the negative environmental impacts of current food systems. To aid in achieving global food security, one such form of alternative protein being investigated is cultivated meat, which applies the principles of mechanical and tissue engineering to produce animal proteins and meat products from animal cells. Herein, nonmodified and methacrylated whey protein formed hydrogels with methacrylated alginate as potential tissue engineering scaffolds for cultivated meat. Whey protein is a byproduct of dairy processing and was selected because it is an approved food additive and cytocompatible and has shown efficacy in other biomaterial applications. Whey protein and alginate scaffolds were formed via visible light cross-linking in aqueous solutions under ambient conditions. The characteristics of the precursor solution and the physical-mechanical properties of the scaffolds were quantified; while gelation occurred within the homo- and copolymer hydrogels, the integrity of the network was significantly altered with varying components. Qualitatively, the scaffolds exhibited a three-dimensional (3D) interconnected porous network. Whey protein isolate (WPI)-based scaffolds were noncytotoxic and supported in vitro myoblast adhesion and proliferation. The data presented support the hypothesis that the composition of the hydrogel plays a significant role in the scaffold's performance.

Dual Cross-Linked Stimuli-Responsive Alginate-Based Hydrogels

Sodium alginate with different molecular weights (55, 170, and 320 kg mol-1) were chemically modified by grafting methacrylic moieties onto the hydroxyl groups of the alginate backbone. The methacrylation was optimized to obtain different degrees of modification. Chemically cross-linked hydrogels were obtained following UV-light irradiation in the presence of a photoinitiator. The swelling behavior and the mechanical properties were observed to depend on both the degree of methacrylation and the alginate molecular weight. Due to the chain entanglement present in high-viscosity sodium alginate, lower degrees of modification were required to tune the hydrogel properties. Moreover, in the presence of Ca2+, secondary cross-linking was introduced by the coordination of the alginate guluronate moieties with the Ca2+ ions. The addition of this secondary cross-linking caused fast volume shrinkage and a reinforcement of the mechanical properties. The secondary cross-linking was reversible, and the hydrogels regained their original shape for at least three cycles. Additionally, the dual cross-linked network can be used to induce adhesion between hydrogels and serve as a building block for self-folding actuators.

Ionically annealed zwitterionic microgels for bioprinting of cartilaginous constructs

Foreign body response (FBR) is a pervasive problem for biomaterials used in tissue engineering. Zwitterionic hydrogels have emerged as an effective solution to this problem, due to their ultra-low fouling properties, which enable them to effectively inhibit FBRin vivo. However, no versatile zwitterionic bioink that allows for high resolution extrusion bioprinting of tissue implants has thus far been reported. In this work, we introduce a simple, novel method for producing zwitterionic microgel bioink, using alginate methacrylate (AlgMA) as crosslinker and mechanical fragmentation as a microgel fabrication method. Photocrosslinked hydrogels made of zwitterionic carboxybetaine acrylamide (CBAA) and sulfobetaine methacrylate (SBMA) are mechanically fragmented through meshes with aperture diameters of 50 and 90µm to produce microgel bioink. The bioinks made with both microgel sizes showed excellent rheological properties and were used for high-resolution printing of objects with overhanging features without requiring a support structure or support bath. The AlgMA crosslinker has a dual role, allowing for both primary photocrosslinking of the bulk hydrogel as well as secondary ionic crosslinking of produced microgels, to quickly stabilize the printed construct in a calcium bath and to produce a microporous scaffold. Scaffolds showed ∼20% porosity, and they supported viability and chondrogenesis of encapsulated human primary chondrocytes. Finally, a meniscus model was bioprinted, to demonstrate the bioink's versatility at printing large, cell-laden constructs which are stable for furtherin vitroculture to promote cartilaginous tissue production. This easy and scalable strategy of producing zwitterionic microgel bioink for high resolution extrusion bioprinting allows for direct cell encapsulation in a microporous scaffold and has potential forin vivobiocompatibility due to the zwitterionic nature of the bioink.

Fiber Microarchitecture in Interpenetrating Collagen-Alginate Hydrogel with Tunable Mechanical Plasticity Regulates Tumor Cell Migration

The fiber structures of tumor microenvironment (TME) are well-known in regulating tumor cell behaviors, and the plastic remolding of TME has recently been suggested to enhance tumor metastasis as well. However, the interrelationship between the fiber microarchitecture and matrix plasticity is inextricable by existing in vitro models. The individual roles of fiber microarchitecture and matrix plasticity in tuning tumor cell behaviors remain elusive. This study develops an interpenetrating collagen-alginate hydrogel platform with independently tunable matrix plasticity and fiber microarchitecture through an interpenetrating strategy of alginate networks and collagen I networks. With this hydrogel platform, it is demonstrated that tumor cells in high plasticity hydrogels are more extensive and aggressive than in low plasticity hydrogels and fiber structures only have influence in high plasticity hydrogels. The study further elucidates the underlying mechanisms through analyzing the distribution of forces within the matrix and tracking the focal adhesions (FAs) and finds that highly plastic hydrogels can activate the FAs formation, whereas the maturation and stability of FAs are dominated by fiber dispersion. This study not only establishes new ideas on how cells interact with TME cues but also would help to further finely tailor engineered hydrogel platforms for studying tumor behaviors in vitro.

Construction of a bioactive copper-based metal organic framework-embedded dual-crosslinked alginate hydrogel for antimicrobial applications

Metal-organic frameworks (MOFs) containing bioactive metals have the potential to exhibit antimicrobial activity by releasing metal ions or ligands through the cleavage of metal-ligand bonds. Recently, copper-based MOFs (Cu-MOFs) with sustained release capability, porosity, and structural flexibility have shown promising antimicrobial properties. However, for clinical use, the controlled release of Cu²⁺ over an extended time period is crucial to prevent toxicity. In this study, we developed an alginate-based antimicrobial scaffold and encapsulated MOFs within a dual-crosslinked alginate polymer network. We synthesized Cu-MOFs containing glutarate (Glu) and 4,4'-azopyridine (AZPY) (Cu(AZPY)-MOF) and encapsulated them in an alginate-based hydrogel through a combination of visible light-induced photo and calcium ion-induced chemical crosslinking processes. We confirmed Cu(AZPY)-MOF synthesis using scanning electron microscopy, transmission electron microscopy, powder X-ray diffraction, and thermogravimetric analysis. This antimicrobial hydrogel demonstrated excellent antibacterial and antifungal properties against two bacterial strains (MRSA and S. mutans, with >99.9 % antibacterial rate) and one fungal strain (C. albicans, with >78.7 % antifungal rate) as well as negligible cytotoxicity towards mouse embryonic fibroblasts, making it a promising candidate for various tissue engineering applications in biomedical fields.

Anisotropic, Hydrogel Microparticles as pH-Responsive Drug Carriers for Oral Administration of 5-FU

In the last 20 years, the development of stimuli-responsive drug delivery systems (DDS) has received great attention. Hydrogel microparticles represent one of the candidates with the most potential. However, if the role of the cross-linking method, polymer composition, and concentration on their performance as DDS has been well-studied, still, a lot needs to be explained regarding the effect caused by the morphology. To investigate this, herein, we report the fabrication of PEGDA-ALMA-based microgels with spherical and asymmetric shapes for 5-fluorouracil (5-FU) on-demand loading and in vitro pH-triggered release. Due to anisotropic properties, the asymmetric particles showed an increased drug adsorption and higher pH responsiveness, which in turn led to a higher desorption efficacy at the target pH environment, making them an ideal candidate for oral administration of 5-FU in colorectal cancer. The cytotoxicity of empty spherical microgels was higher than the cytotoxicity of empty asymmetric microgels, suggesting that the gel network's mechanical proprieties of anisotropic particles were a better three-dimensional environment for the vital functions of cells. Upon treatment with drug-loaded microgels, the HeLa cells' viability was lower after incubation with asymmetric particles, confirming a minor release of 5-FU from spherical particles.

Physico-mechanical and ex vivo analysis of aloe-alginate hydrogels for cervical cancer treatment

A leading cancer diagnosis in women worldwide is cervical cancer, with current treatments all posing a risk of serious side effects. Less toxic, but effective treatments are sought after. Aloe vera ( barbadensis miller), known for its beneficial properties, has been studied for cancer treatment. While aloe gel has been shown to exhibit anti-cancer activity, it cannot form a hydrogel alone. Therefore, an interpenetrating network comprising alginate blended with aloe was examined as a cervical cancer treatment. We hypothesized the antioxidant properties of aloe gel would decrease cancer cell viability while the alginate hydrogel would improve mucoadhesion. We further hypothesized the antioxidant activity of aloe gel would induce cancer cell death at levels similar to common chemotherapeutics, and aimed to determine if these chemotherapeutic behaviors are constructive or destructive. Material and adhesive properties, drug encapsulation, and cancer cell viability were investigated and validated. The effect of aloe-alginate hydrogels on cervical cancer cell viability was not significantly different compared to aloe-blends containing doxorubicin (DOX), indicating that the aloe alone decreased cancer cell viability rendering the additional cytotoxic therapeutic not impactful as an adjuvant therapy. This study provides insight into the potential of natural biopolymers for treating cervical cancer without systemic toxic compounds.

Dual-Crosslinked Alginate-Based Hydrogels with Tunable Mechanical Properties for Cultured Meat

Cultured meat refers to the production of animal tissue by utilizing the same techniques as tissue engineering through cell culture. Various biomaterials have been designed to serve as in vitro supports for cell viability, growth, and migration. In this study, visible light and dual-crosslinked alginate hydrogels were designed to enable control of the physical and mechanical properties needed for the fabrication of cultured meat scaffolds. We hypothesized that a difference in hydrogel stiffness would influence cell behavior, indicating the efficacy of our processing methods to benefit the cultured meat field. Herein, we synthesized and created: (1) methacrylated alginate (AlgMA) to enable covalent crosslinking via visible light exposure, (2) Methacrylated alginate and arginyl-glycyl-aspartic acid RGD conjugates (AlgMA-RGD), using carbodiimide chemistries to provide cell-binding sites on the material, and (3) designer hydrogels incorporating different crosslinking techniques. The material and mechanical properties were evaluated to determine the structural integrity of the hydrogels, and in vitro cell assays were conducted to verify cytocompatibility and cell adhesion. Gelation, swell ratio, and weight loss calculations revealed longer gelation times for the AlgMA scaffolds and similar physical properties for all hydrogel groups. We showed that by adjusting the polymer concentration and the crosslinking methodology, the scaffold’s mechanical properties can be controlled and optimized within physiological ranges. Incorporating dual crosslinking significantly increased the compressive moduli of the AlgMA hydrogels, compared to visible-light crosslinking alone. Moreover, the muscle satellite cells responded favorably to the AlgMA scaffolds, with clear differences in cell density when cultured on materials with significantly different mechanical properties. Our results indicate the usefulness of the dual-crosslinking alginate hydrogel system to support in vitro meat growth.

Alginate-Based Hydrogel as Delivery System for Therapeutic Bacterial RNase

To deliver therapeutic proteins into a living body, it is important to maintain their target activity in the gastrointestinal tract after oral administration. Secreted ribonuclease from Bacillus pumilus (binase) has antitumor and antiviral activity, which makes it a promising therapeutic agent. This globular protein of small molecular weight (12.2 kDa) is considered as a potential agent that induces apoptosis of tumor cells expressing certain oncogenes, including colorectal and duodenum cancer. The most important problem of its usage is the preservation of its structure and target activity, which could be lost during oral administration. Here, we developed alginate microspheres reinforced with divalent cations and analyzed the enzyme release from them. Using methods of scanning electron microscopy, measurements of fluorescence, enzyme catalytic activity, and determination of viability of the duodenum adenocarcinoma tumor cell line, we characterized obtained microspheres and chose calcium as a biogenic ion-strengthening microsphere structure. Among such modified additivities as beta-casein, gelatin, and carbon nanotubes introduced into microspheres, only gelatin showed a pronounced increase in their stability and provided data on the prolonged action of enzyme release from microspheres into tumor cell culture medium during 48 h in an amount of about 70% of the loaded quantity.

Bio-inspired green light crosslinked alginate-heparin hydrogels support HUVEC tube formation

Alginate is a polysaccharide which forms hydrogels via ionic and/or covalent crosslinking. The goal was to develop a material with suitable, physiologically relevant mechanical properties and biological impact for use in wound treatment. To determine if the novel material can initiate tube formation on its own, without the dependance on the addition of growth factors, heparin and/or arginyl-glycyl-aspartic acid (RGD) was covalently conjugated onto the alginate backbone. Herein, cell adhesion motifs and bioactive functional groups were incorporated covalently within alginate hydrogels to study the: 1) impact of crosslinked heparin on tubular network formation, 2) impact of RGD conjugation, and the 3) biological effect of vascular endothelial growth factor (VEGF) loading on cellular response. We investigated the structure-properties-function relationship and determined the viscoelastic and burst properties of the hydrogels most applicable for use as a healing cell and tissue adhesive material. Methacrylation of alginate and heparin hydroxyl groups respectively enabled free-radical covalent inter- and intra-molecular photo-crosslinking when exposed to visible green light in the presence of photo-initiators; the shear moduli indicate mechanical properties comparable to clinical standards. RGD was conjugated via carbodiimide chemistry at the alginate carboxyl groups. The adhesive and mechanical properties of alginate and alginate-heparin hydrogels were determined via burst pressure testing and rheology. Higher burst pressure and material failure at rupture imply physical tissue adhesion, advantageous for a tissue sealant healing material. After hydrogel formation, human umbilical vein endothelial cells (HUVECs) were seeded onto the alginate-based hydrogels; cytotoxicity, total protein content, and tubular network formation were assessed. Burst pressure results indicate that the cell responsive hydrogels adhere to collagen substrates and exhibit increased strength under high pressures. Furthermore, the results show that the green light crosslinked alginate-heparin maintained cell adhesion and promoted tubular formation.

Characteristics of a novel photoinitiator aceanthrenequinone-initiated polymerization and cytocompatibility of its triggered polymer

•

AATQ is a novel photosensitizer with high-photoinitiating conversion efficiency at a relatively low concentration under 455 nm-blue light.

•

Cytotoxicity of AATQ to different tissue types of cells is much lower than widely used-BAPO.

•

Cytocompatibility of AATQ-initiated polymer is significantly superior to PANQ, but inferior to CQ.

•

AATQ offers an alternative in industrial or biomedical areas, especially in the required low concentration of photoinitiators.

A number of photoinitiators are available in chemical industry, but less of them in biomedicine or clinical therapy due to the limitation of their cytotoxicity and biocompatibility. Thus, it is urgently necessary to find non-toxic or low-toxic photoinitiators to meet clinical demands. Aceanthrenequinone (AATQ) is a novel photosensitizer with high-photoinitiating ability, but no reports contribute, to date, to its cytotoxicity and biocompatibility. Here, primary cells and various cell lines were exposed to different concentrations of AATQ with or without irradiation. AATQ had the similar photoinitiating conversion efficiency to the extensively used bis(2,4,6-trimethylbenzoyl)-phenylphosphine oxide (BAPO) and higher one than 9,10-phenanthrenequinone (PANQ) with the similar extent of polymerization in depth within a certain range, but displayed much lower cytotoxicity than BAPO under non-irradiation or irradiation. The biocompatibility of BisGMA/TEGDMA polymer prepared by AATQ was superior to that of PANQ, but inferior to that of camphorquinone (CQ) although the far lower dose of AATQ is enough to initiate polymerization of monomer than that of CQ. Hence, AATQ offers a valuable alternative in applications of industrial or biomedical areas.

Bio-functional strontium-containing photocrosslinked alginate hydrogels for promoting the osteogenic behaviors

In recent years, photocrosslinked alginate hydrogel has been widely studied in bone tissue engineering, owing to its numerous advantages. However, there are still some shortcomings like insufficient mechanical strength and lack of bone induction. To compensate for these deficiencies, in this work, a novel doped strontium (Sr) photocrosslinked methacrylated alginate (Sr-PMA) hydrogel was developed. Photocrosslinked alginate hydrogel fabricated via crosslinking methacrylate-modified alginate under ultraviolet (UV) light was placed into strontium solutions to prepare Sr-PMA gel by chelating reaction. The chemical structures, swelling behaviors, degradation profiles, elastic moduli, Sr²⁺ ion release and surface morphology of the Sr-PMA hydrogel were characterized, and we found that physical properties of the gels can be tailored by varying concentration of Sr²⁺ ions. And MC3T3-E1 cell viability, proliferation and mineralization outside the hydrogel were also investigated. Further research on cell survival, multiplication, osteogenic differentiation of the cells encapsulated in Sr-PMA hydrogels were explored. In vitro studies of biological properties revealed that incorporation of Sr²⁺ into photocrosslinked alginate gels significantly improved osteogenic differentiation capabilities and mineralization via stimulating expression of osteogenesis related genes and proteins of the cells compared to strontium-free photocrosslinked alginate gels. The research demonstrates that the innovative Sr-PMA hydrogels possessing adjustable physical performances, excellent biocompatibility and osteogenic differentiation capabilities could be potentially applied to bone tissue engineering and regenerative medicine. Meanwhile, it also provides a reference for the modification of biological properties of biomaterials.

A comprehensive review on alginate-based delivery systems for the delivery of chemotherapeutic agent: Doxorubicin

Doxorubicin (DOX), an anthracycline drug, is widely used for the treatment of several cancers like osteosarcoma, cervical carcinoma, breast cancer, etc. DOX lacks target specificity; thereby it also affects normal cells thus resulting in several side-effects. A drug delivery system (DDS) can be used to deliver the drug in a controlled and sustained manner at a targeted site within the body. Various DDS like nanoemulsions, polymeric nanoparticles, and liposomes are used for loading DOX. Alginate, a polysaccharide is widely used for fabricating DDS due to its biodegradable and bio-compatible properties. Alginates, in combination with other biomaterials, have been extensively used as a novel drug delivery carrier for DOX. Alginate provides a platform for drug delivery in different forms like hydrogels, nanogels, nanoparticles, microparticles, graphene oxide systems, magnetic systems, etc. Herein, we briefly describe alginate in combination with other materials as a nanocarrier for targeted delivery of DOX for anti-cancer treatment.

Current Status of Alginate in Drug Delivery

Alginate is one of the natural polymers that are often used in drug- and protein-delivery systems. The use of alginate can provide several advantages including ease of preparation, biocompatibility, biodegradability, and nontoxicity. It can be applied to various routes of drug administration including targeted or localized drug-delivery systems. The development of alginates as a selected polymer in various delivery systems can be adjusted depending on the challenges that must be overcome by drug or proteins or the system itself. The increased effectiveness and safety of sodium alginate in the drug- or protein-delivery system are evidenced by changing the physicochemical characteristics of the drug or proteins. In this review, various routes of alginate-based drug or protein delivery, the effectivity of alginate in the stem cells, and cell encapsulation have been discussed. The recent advances in the in vivo alginate-based drug-delivery systems as well as their toxicities have also been reviewed.

Internalized FGF-2-Loaded Nanoparticles Increase Nuclear ERK1/2 Content and Result in Lung Cancer Cell Death

Innovative cancer treatments, which improve adjuvant therapy and reduce adverse events, are desperately needed. Nanoparticles provide controlled intracellular biomolecule delivery in the absence of activating external cell surface receptors. Prior reports suggest that intracrine signaling, following overexpression of basic fibroblast growth factor (FGF-2) after viral transduction, has a toxic effect on diseased cells. Herein, the research goals were to (1) encapsulate recombinant FGF-2 within stable, alginate-based nanoparticles (ABNs) for non-specific cellular uptake, and (2) determine the effects of ABN-mediated intracellular delivery of FGF-2 on cancer cell proliferation/survival. In culture, human alveolar adenocarcinoma basal epithelial cell line (A549s) and immortalized human bronchial epithelial cell line (HBE1s) internalized ABNs through non-selective endocytosis. Compared to A549s exposed to empty (i.e., blank) ABNs, the intracellular delivery of FGF-2 via ABNs significantly increased the levels of lactate dehydrogenase, indicating that FGF-2-ABN treatment decreased the transformed cell integrity. Noticeably, the nontransformed cells were not significantly affected by FGF-2-loaded ABN treatment. Furthermore, FGF-2-loaded ABNs significantly increased nuclear levels of activated-extracellular signal-regulated kinase ½ (ERK1/2) in A549s but had no significant effect on HBE1 nuclear ERK1/2 expression. Our novel intracellular delivery method of FGF-2 via nanoparticles resulted in increased cancer cell death via increased nuclear ERK1/2 activation.

Alginate-based hydrogels as drug delivery vehicles in cancer treatment and their applications in wound dressing and 3D bioprinting

Hydrogels are a three-dimensional and crosslinked network of hydrophilic polymers. They can absorb a large amount of water or biological fluids, which leads to their swelling while maintaining their 3D structure without dissolving (Zhu and Marchant, Expert Rev Med Devices 8:607-626, 2011). Among the numerous polymers which have been utilized for the preparation of the hydrogels, polysaccharides have gained more attention in the area of pharmaceutics; Sodium alginate is a non-toxic, biocompatible, and biodegradable polysaccharide with several unique physicochemical properties for which has used as delivery vehicles for drugs (Kumar Giri et al., Curr Drug Deliv 9:539-555, 2012). Owing to their high-water content and resembling the natural soft tissue, hydrogels were studied a lot as a scaffold. The formation of hydrogels can occur by interactions of the anionic alginates with multivalent inorganic cations through a typical ionotropic gelation method. However, those applications require the control of some properties such as mechanical stiffness, swelling, degradation, cell attachment, and binding or release of bioactive molecules by using the chemical or physical modifications of the alginate hydrogel. In the current review, an overview of alginate hydrogels and their properties will be presented as well as the methods of producing alginate hydrogels. In the next section of the present review paper, the application of the alginate hydrogels will be defined as drug delivery vehicles for chemotherapeutic agents. The recent advances in the application of the alginate-based hydrogels will be describe later as a wound dressing and bioink in 3D bioprinting.

Dual Crosslinked Methacrylated Alginate Hydrogel Micron Fibers and Tissue Constructs for Cell Biology

As an important natural polysaccharide biomaterial from marine organisms, alginate and its derivatives have shown great potential in the fabrication of biomedical materials such as tissue engineering, cell biology, drug delivery, and pharmaceuticals due to their excellent biological activity and controllable physicochemical properties. Ionic crosslinking is the most common method used in the preparation of alginate-based biomaterials, but ionic crosslinked alginate hydrogels are prone to decompose in physiological solution, which hinders their applications in biomedical fields. In this study, dual crosslinked alginate hydrogel microfibers were prepared for the first time. The ionic crosslinked methacrylated alginate (Alg-MA) hydrogel microfibers fabricated by Microfluidic Fabrication (MFF) system were exposed to ultraviolet (UV) light and covalent crosslink between methacrylate groups avoided the fracture of dual crosslinked macromolecular chains in organizational environment. The chemical structures, swelling ratio, mechanical performance, and stability were investigated. Cell-encapsulated dual crosslinked Alg-MA hydrogel microfibers were fabricated to explore the application in tissue engineering for the first time. The hydrogel microfibers provided an excellent 3D distribution and growth conditions for cells. Cell-encapsulated Alg-MA microfibers scaffolds with functional 3D tissue structures were developed which possessed great potential in the production of next-generation scaffolds for tissue engineering and regenerative medicine.

Physico-mechanical Characterization of Liquid versus Solid Applications of Visible Light Cross-Linked Tissue Sealants

The limitations of commercially available tissue sealants have resulted in the need for a new tissue adhesives with adequate adhesion, improved mechanical properties, and innocuous degradation products. To address current limitations, a visible light cross-linking method for the preparation of hydrogel tissue sealants, based on natural polymers (chitosan or alginate), is presented. Water-soluble chitosan was generated via modification with vinyl groups. To form hydrogels, alginate and chitosan were cross-linked by green light illumination, with or without the use of a bifunctional cross-linker. Evaluation of the mechanical properties through rheological characterization demonstrated an increased viscosity of polymer blends, and differences in shear moduli despite similar gelation points upon photo-cross-linking. A comparative study on the burst pressure properties of liquid versus solid material applications was performed to determine if the tissue sealants can perform under physiological lung pressures and beyond using different application methods. Higher burst pressure values were obtained for the sealants applied as a liquid compared to the solid application. The hydrogel tissue sealants revealed no cytotoxic effects toward primary human mesenchymal stem cells. This is the first report of a direct comparison between hydrogel tissue sealants of the same formulation applied in liquid versus solid form.

Dual-crosslinked homogeneous alginate microspheres for mesenchymal stem cell encapsulation

A smart hydrogel material was used in combination with custom microfluidic devices (MFDs) to create microspheres for human mesenchymal stem cell (MSC) encapsulation. Methods for fabricating homogeneous stimuli-responsive microspheres for MSC encapsulation and cell delivery have gained interest to increase viability and manipulate microencapsulation within microspheres 10-1000 µm in diameter. Herein, MFDs were combined with non-toxic smart hydrogel materials to tune both the size and mechanics of the microspheres. Traditional hydrogels have a single input/stimulus for crosslinking, utilize potentially toxic ultraviolet radiation, and fail to mimic surrounding musculoskeletal tissue mechanics. Thus, it is highly beneficial to encapsulate MSCs inside a mechanically-stable microsphere made from naturally-derived materials. The objectives of this research were to optimize microsphere fabrication techniques using custom microfluidic devices (MFDs), and to encapsulate viable MSCs within visible-light crosslinked smart-alginate microspheres, with tunable mechanical properties. Microsphere production was characterized optically, and MSC viability, post-encapsulation, was verified using a standard florescence assay. Cell viability was maintained in chemically-modified alginate homogenous microspheres post encapsulation, and after subsequent crosslinking via green light exposure.

Porphyrin–ferrocene conjugates for photodynamic and chemodynamic therapy

Porphyrin–ferrocene conjugates were designed and synthesized for photodynamic and chemodynamic therapy.

Silk Nanofibers as Robust and Versatile Emulsifiers

Peptides have been extensively studied as emulsifiers due to their sequence and size control, biocompatibility, versatility, and stabilizing capacity. However, cost and mass production remain the challenges for broader utility for these emulsifiers. Here we demonstrate the utility of silk fibroin nanofibers as emulsifiers, with superior functions to the more traditional peptide emulsifiers. This silk nanofiber system is universal for different oil phases with various polarities and demonstrates control of microcapsule size through tuning the ratio of silk fibroin nanofiber solutions to oils. Besides the improved stabilizing capacity to peptides, these silk fibroin nanofibers endow additional stability to the emulsions formed under high salt concentration and low pH. Highly efficient encapsulation of biomarkers through interfacial networks suggests potential applications in therapeutics, food, and cosmetics. Compared to peptide emulsifiers, these silk fibroin nanofibers offer advantages in terms of cost, purification, and production scale, without compromising biocompatibility, stabilizing capacity, and versatility.

Anticancer Therapeutic Alginate-Based Tissue Sealants for Lung Repair

Injury to the connective tissue that lines the lung, the pleura, or the lung itself can occur from many causes including trauma or surgery, as well as lung diseases or cancers. To address current limitations for patching lung injuries, to stop air or fluid leaks, an adherent hydrogel sealant patch system was developed, based on methacrylated alginate (AMA) and AMA dialdehyde (AMA-DA) blends, which is capable of sealing damaged tissues and sustaining physiological pressures. Methacrylation of alginate hydroxyl groups rendered the polysaccharide capable of photo-cross-linking when mixed with an eosin Y-based photoinitiator system and exposed to visible green light. Oxidation of alginate yields functional aldehyde groups capable of imine bond formation with proteins found in many tissues. The alginate-based patch system was rigorously tested on a custom burst pressure testing device. Blending of nonoxidized material with oxidized (aldehyde modified) alginates yielded patches with improved burst pressure performance and decreased delamination as compared with pure AMA. Human mesothelial cell (MeT-5A) viability and cytotoxicity were retained when cultured with the hydrogel patches. The release and bioactivity of doxorubicin-encapsulated submicrospheres enabled the fabrication of drug-eluting adhesive patches and were effective in decreasing human lung cancer cell (A549) viability.

Localized multidrug co-delivery by injectable self-crosslinking hydrogel for synergistic combinational chemotherapy

The multidrug co-loaded injectable hydrogels against tumor showed superiority and potential application values.