Iron Oxide Nanowires from Bacteria Biofilm as an Efficient Visible-Light Magnetic Photocatalyst

From Biowaste to Lab-Bench: Low-Cost Magnetic Iron Oxide Nanoparticles for RNA Extraction and SARS-CoV-2 Diagnostics

The gold standard for diagnostics of SARS-CoV-2 (COVID-19) virus is based on real-time polymerase chain reaction (RT-PCR) using centralized PCR facilities and commercial viral RNA extraction kits. One of the key components of these kits are magnetic beads composed of silica coated magnetic iron oxide (Fe2O3 or Fe3O4) nanoparticles, needed for the selective extraction of RNA. At the beginning of the pandemic in 2019, due to a high demand across the world there were severe shortages of many reagents and consumables, including these magnetic beads required for testing for SARS-CoV-2. Laboratories needed to source these products elsewhere, preferably at a comparable or lower cost. Here, we describe the development of a simple, low-cost and scalable preparation of magnetic nanoparticles (MNPs) from biowaste and demonstrate their successful application in viral RNA extraction and the detection of COVID-19. These MNPs have a unique nanoplatelet shape with a high surface area, which are beneficial features, expected to provide improved RNA adsorption, better dispersion and processing ability compared with commercial spherical magnetic beads. Their performance in COVID-19 RNA extraction was evaluated in comparison with commercial magnetic beads and the results presented here showed comparable results for high throughput PCR analysis. The presented magnetic nanoplatelets generated from biomass waste are safe, low-cost, simple to produce in large scale and could provide a significantly reduced cost of nucleic acid extraction for SARS-CoV-2 and other DNA and RNA viruses.

Magnetic enrichment of immuno-specific extracellular vesicles for mass spectrometry using biofilm-derived iron oxide nanowires

Immuno-specific enrichment of extracellular vesicles (EVs) can provide important information into cellular pathways underpinning various pathologies and for non-invasive diagnostics, including mass spectrometry-based analyses. Herein, we report an optimised protocol for immuno-magnetic enrichment of specific EV subtypes and their subsequent processing with liquid chromatography-tandem mass spectrometry (LC-MS/MS). Specifically, we conjugated placental alkaline phosphatase (PLAP) antibodies to magnetic iron oxide nanowires (NWs) derived from bacterial biofilms and demonstrated the utility of this approach by enriching placenta-specific EVs (containing PLAP) from cell culture media. We demonstrate efficient PLAP+ve EV enrichment for both NW-PLAP and Dynabeads™-PLAP, with high PLAP protein recovery (83.7 ± 8.9% and 83.2 ± 5.9%, respectively), high particle-to-protein ratio (7.5 ± 0.7 × 10⁹ and 7.1 ± 1.2 × 10⁹, respectively), and low non-specific binding of non-target EVs (7 ± 3.2% and 5.4 ± 2.2%, respectively). Furthermore, our optimized EV enrichment and processing approach identified 2518 and 2545 protein groups with LC-MS/MS for NW-PLAP and Dynabead™-PLAP, respectively, with excellent reproducibility (Pearson correlation 0.986 and 0.988). These findings demonstrate that naturally occurring iron oxide NWs have comparable performance to current gold standard immune-magnetic beads. The optimized immuno-specific EV enrichment for LC-MS/MS method provides a low-cost and highly-scalable yet efficient, high-throughput approach for quality EV proteomic studies.

Amorphous iron oxides anchored on BiOCl nanoplates as robust catalysts for high-performance photo-Fenton oxidation

Semiconductor supported iron oxides are highly promising catalysts to remove organic pollutants in photo-Fenton. Development of robust composite catalysts with both high activity and stability is essential. In this work, amorphous iron oxide layers are uniformly and tightly anchored on two-dimensional (2D) BiOCl nanoplates through post precipitation-deposition and subsequent low-temperature thermal treatment at 150-350 °C. A low iron loading amount (1-2 wt.%) is sufficient to make the resulted composite (BiOCl-Fe) catalysts superior in photo-Fenton oxidation of phenol (10 mg/L) with high mineralization efficiency (up to about 80% in 60 min). The low-temperature thermal treatment can significantly enhance the stability of catalysts with much less iron leached and high photo-Fenton performance maintained. The intimate contact between the amorphous iron oxide layers and the 2D BiOCl nanoplates could guarantee the fluent electron transfer and efficient activation of H₂O₂ at interfaces. Compared with the pristine BiOCl, the BiOCl-Fe catalysts possess faster separation of the charge carriers. The predominant active species turns from O₂^•- in photocatalysis to HO^• in the photo-Fenton catalysis. This research could provide enhanced understanding on the synthesis of robust catalysts and the structure optimization of BiOCl supported iron oxides for photo-Fenton.

Graphene-derived antibacterial nanocomposites for water disinfection: Current and future perspectives

Antimicrobial nanomaterials provide numerous opportunities for the synthesis of next-generation sustainable water disinfectants. Using the keywords graphene and water disinfection and graphene antibacterial activity, a detailed search of the Scopus database yielded 198 and 1433 studies on using graphene for water disinfection applications and graphene antibacterial activity in the last ten years, respectively. Graphene family nanomaterials (GFNs) have emerged as effective antibacterial agents. The current innovations in graphene-, graphene oxide (GO)-, reduced graphene oxide (rGO)-, and graphene quantum dot (GQD)-based nanocomposites for water disinfection, including their functionalization with semiconductor photocatalysts and metal and metal oxide nanoparticles, have been thoroughly discussed in this review. Furthermore, their novel application in the fabrication of 3D porous hydrogels, thin films, and membranes has been emphasized. The physicochemical and structural properties affecting their antibacterial efficiency, such as sheet size, layer number, shape, edges, smoothness/roughness, arrangement mode, aggregation, dispersibility, and surface functionalization have been highlighted. The various mechanisms involved in GFN antibacterial action have been reviewed, including the mechanisms of membrane stress, ROS-dependent and -independent oxidative stress, cell wrapping/trapping, charge transfer, and interaction with cellular components. For safe applications, the potential biosafety and biocompatibility of GFNs in aquatic environments are emphasized. Finally, the current limitations and future perspectives are discussed. This review may provide ideas for developing efficient and practical solutions using graphene-, GO-, rGO-, and GQD-based nanocomposites in water disinfection by rationally employing their unique properties.

Synthesis of magnetite/lanthanum hydroxide composite and magnetite/aluminum hydroxide composite for removal of phosphate

Two magnetic adsorbents, magnetite/aluminum hydroxide composite (MAC) and magnetite/lanthanum hydroxide composite (MLC), were successfully synthesized by a simple one-pot method and their phosphate adsorption process was investigated. The properties of synthesized adsorbents were studied using Fourier transform infrared spectroscopy (FTIR), zeta potential, vibrating sample magnetometry (VSM) and X-ray photoelectron spectroscopy (XPS). The adsorption isotherms, adsorption kinetics and the effects of solution pH and dissolved organic carbon (DOC) on the adsorption of phosphate in aqueous solution by MAC, MLC-2, MLC-10 and LMB were investigated to evaluate the difference in phosphate removal efficiency of the magnetic adsorbents and non-magnetic adsorbent. According to the results of this study, MLC-10 had a higher phosphate adsorption capacity (19.34 mg P g^-1) than LMB (11.55 mg P g^-1), MAC (10.48 mg P g^-1) and MLC-2 (8.89 mg P g^-1). MLC-10 showed a relative higher partition coefficient (PC) (1.74 mg g^-1 μM^-1) than other three adsorbents at initial P concentration of 15 mg L^-1. Also, MLC-10 was less pH dependent than MAC and had higher phosphate adsorption capacities under different DOC concentrations (0-72 mg L^-1) than LMB, MAC and MLC-2. Further, MLC-10 had excellent recyclability due to high magnetism. Electrostatic interaction and the inner-sphere surface complexation were the potential phosphate adsorption mechanisms employed by MLC-10. In summary, MLC-10 is a promising adsorbent for phosphate removal from eutrophication water.

Facile Solvothermal Synthesis of CuCo₂S₄ Yolk-Shells and Their Visible-Light-Driven Photocatalytic Properties

In this present work, we synthesized a yolk-shell shaped CuCo₂S₄ by a simple anion exchange method. The morphological and structural properties of the as-synthesized sample were characterized using X-ray diffraction (XRD), UV-vis diffuse reflectance spectra (UV-vis DRS), scanning electron microscopy (SEM), and transmission electron microscopy (TEM). The SEM and TEM results confirmed that the uniform yolk-shell structure was formed during the solvothermal process. The band gap was about 1.41 eV, which have been confirmed by UV–vis DRS analysis. The photocatalytic property was evaluated by the photocatalytic degradation of methylene blue (MB) dye as a target pollutant under the visible-light irradiation. The experimental results confirmed the potential application of yolk-shell shape CuCo₂S₄ in visible-light photocatalytic applications.

The hydrothermal processing of iron oxides from bacterial biofilm waste as new nanomaterials for broad applications

Iron oxides and their hydroxides have been studied and analysed with properties of their mutual transformations under different hydrothermal conditions being indicated. Amorphous bacteria nanowires produced from biofilm waste were investigated under the influence of pH at a fixed duration (20 h) and reaction temperature (200 °C). The morphology, structure, and particle size of the transformation of hematite (α-Fe2O3) was obtained and characterised with SEM, XRD, FTIR, and particle sizer. The optimal conditions for the complete conversion of amorphous iron oxide nanowires to crystalline α-Fe2O3 is under acidic conditions where the pH is 1. The flower-like α-Fe2O3 structures have photocatalytic activity and adsorbent properties for heavy metal ions. This one-pot synthesis approach to produce α-Fe2O3 at a low cost would be greatly applicable to the recycling process of biofilm waste in order to benefit the environment.

Iron-oxidizing bacteria in marine environments: recent progresses and future directions

Iron-oxidizing bacteria (FeOB) refers to a group of bacteria with the ability to exchange and accumulate divalent iron dissolved in water as trivalent iron inside and outside the bacterial cell. Most FeOB belong the largest bacterial phylum, Proteobacteria. Within this phylum, FeOB with varying physiology with regards to their response to oxygen (obligate aerobes, facultative and obligate anaerobes) and pH optimum for proliferation (neutrophiles, moderate and extreme acidophiles) can be found. Although FeOB have been reported from a wide variety of environments, most of them have not been isolated and their biochemical characteristics remain largely unknown. This is especially true for those living in the marine realm, where the properties of FeOB was not known until the isolation of the Zetaproteobacteria Mariprofundus ferrooxydans, first reported in 2007. Since the proposal of Zetaproteobacteria by Emerson et al., the detection and isolation of those microorganisms from the marine environment has greatly escalated. Furthermore, FeOB have also recently been reported from works on ocean drilling and metal corrosion. This review aims to summarize the current state of phylogenetic and physiological diversity in marine FeOB, the significance of their roles in their environments (on both global and local scales), as well as their growing importance and applications in the industry.

Magnetite/Lanthanum hydroxide for phosphate sequestration and recovery from lake and the attenuation effects of sediment particles

An effective approach for eutrophication control and phosphate recovery remains a longstanding challenge. Herein, we present a new technique for phosphate sequestration in lake and phosphate recovery using novel magnetically recoverable magnetite/lanthanum hydroxide [M-La(OH)₃] hybrids that can be prepared using a simple one-pot synthesis method. Batch studies show that M-La(OH)₃ exhibits a strong sorption towards phosphate with sorption capacities of up to 52.7 mg-P/g at pH 7.0 in water. A simple model indicates that the efficiency of M-La(OH)₃ for phosphate sequestration in lake is significantly attenuated by 34-45% compared to that in water, due to interference from sediment particles. However, our results demonstrate that sediments suspensions mixed with a M-La(OH)₃ content of 1-3% exhibit a capability of up to 1.2 mg-P/g for sequestering external phosphate compared with that of 0.2 mg-P/g for pristine sediment at pH 7.3. M-La(OH)₃-mixed sediment suspensions appear to effectively sequester phosphate over an environmentally relevant pH range from 4 to 8.5. Phosphorus (P) fractionation experiments indicate that the enhanced phosphate sorption by M-La(OH)₃-mixed sediment suspensions is mainly due to the increased fractions of NaOH-P and inorganic P. This work indicates that the M-La(OH)₃ has the potential for phosphate sequestration and recovery from lake.

Biosynthesis of Inorganic Nanoparticles: A Fresh Look at the Control of Shape, Size and Composition

Several methodologies have been devised for the design of nanomaterials. The "Holy Grail" for materials scientists is the cost-effective, eco-friendly synthesis of nanomaterials with controlled sizes, shapes and compositions, as these features confer to the as-produced nanocrystals unique properties making them appropriate candidates for valuable bio-applications. The present review summarizes published data regarding the production of nanomaterials with special features via sustainable methodologies based on the utilization of natural bioresources. The richness of the latter, the diversity of the routes adopted and the tuned experimental parameters have led to the fabrication of nanomaterials belonging to different chemical families with appropriate compositions and displaying interesting sizes and shapes. It is expected that these outstanding findings will encourage researchers and attract newcomers to continue and extend the exploration of possibilities offered by nature and the design of innovative and safer methodologies towards the synthesis of unique nanomaterials, possessing desired features and exhibiting valuable properties that can be exploited in a profusion of fields.

Bacterial iron-oxide nanowires from biofilm waste as a new adsorbent for the removal of arsenic from water

Biofilm waste material generated by the bacteria in the groundwater pipelines was found is composed of amorphous twisted iron-oxide nanowires which are shown to have considerable adsorption properties for removal As(iii) and As(v) ions from waters.