Multifunctionalization of Poly(vinylidene fluoride)/Reactive Copolymer Blend Membranes for Broad Spectrum Applications

Chemical antifouling strategies in sensors for food analysis: A review

Surface biofouling induced by the undesired nonspecific adsorption of foulants (e.g., coexisting proteins and cells) in food matrices is a major issue of sensors for food analysis, hindering their reliability and accuracy of sensing. This issue can be addressed by developing antifouling strategies to prevent or alleviate nonspecific binding. Chemical antifouling strategies involve the use of chemical modifiers (i.e., antifouling materials) to strongly hydrate the surface and reduce surface biofouling. Through appropriate immobilization approaches, antifouling materials can be tethered onto sensors to form antifouling surfaces with well-ordered structures, balanced surface charges, and appropriate surface density and thickness. A rational antifouling surface can reduce the matrix effect, simplify sample pretreatment, and improve analytical performance. This review summarizes recent developments in chemical antifouling strategies in sensing. Surface antifouling mechanisms and common antifouling materials are described, and factors that may influence the antifouling effects of antifouling surfaces and approaches incorporating antifouling materials onto sensing surfaces are highlighted. Moreover, the specific applications of antifouling sensors in food analysis are introduced. Finally, we provide an outlook on future developments in antifouling sensors for food analysis.

Antimicrobial Peptides: Challenging Journey to the Pharmaceutical, Biomedical, and Cosmeceutical Use

Antimicrobial peptides (AMPs), or host defence peptides, are short proteins in various life forms. Here we discuss AMPs, which may become a promising substitute or adjuvant in pharmaceutical, biomedical, and cosmeceutical uses. Their pharmacological potential has been investigated intensively, especially as antibacterial and antifungal drugs and as promising antiviral and anticancer agents. AMPs exhibit many properties, and some of these have attracted the attention of the cosmetic industry. AMPs are being developed as novel antibiotics to combat multidrug-resistant pathogens and as potential treatments for various diseases, including cancer, inflammatory disorders, and viral infections. In biomedicine, AMPs are being developed as wound-healing agents because they promote cell growth and tissue repair. The immunomodulatory effects of AMPs could be helpful in the treatment of autoimmune diseases. In the cosmeceutical industry, AMPs are being investigated as potential ingredients in skincare products due to their antioxidant properties (anti-ageing effects) and antibacterial activity, which allows the killing of bacteria that contribute to acne and other skin conditions. The promising benefits of AMPs make them a thrilling area of research, and studies are underway to overcome obstacles and fully harness their therapeutic potential. This review presents the structure, mechanisms of action, possible applications, production methods, and market for AMPs.

Developing an Effective and Durable Film for Marine Fouling Prevention from PDMS/SiO2 and PDMS/PU with SiO2 Composites

Polymer film coating with a highly hydrophobic surface property is a practical approach to prevent fouling of any structures in the marine environment without affecting marine microorganisms. The preparation of a polymer coating, from a simple and easy method of solution blending of hydrophobic polydimethylsiloxane elastomer and hydrophilic polyurethane with SiO₂, was carried out in this study, with the aim of improving characteristics, and the coating demonstrated economic feasibility for antifouling application. Incorporation of SiO₂ particles into PDMS and PDMS/PU polymer film improved mechanical properties of the film and the support fabrication of micropatterns by means of a soft lithography process. Observations from field emission scanning electron microscope (FESEM) of the PDMS/SiO₂ composite film revealed a homogeneous morphology and even dispersion of the SiO₂ disperse phase between 1–5 wt.%. Moreover, the PDMS film with 3 wt.% loading of SiO₂ considerably increased WCA to 115.7° ± 2.5° and improved mechanical properties by increasing Young’s modulus by 128%, compared with neat PDMS film. Additionally, bonding strength between barnacles and the PDMS film with 3 wt.% of SiO₂ loading was 0.16 MPa, which was much lower than the bonding strength between barnacles and the reference carbon steel of 1.16 MPa. When compared to the previous study using PDMS/PU blend (95:5), the count of barnacles of PDMS with 3 wt.% SiO₂ loading was lower by 77% in the two-week field tests and up to 97% in the eight-week field tests. Subsequently, when PDMS with 3 wt.% SiO₂ was further blended with PU, and the surface modified by the soft lithography process, it was found that PDMS/PU (95:5) with 3 wt.% SiO₂ composite film with micropatterns increased WCA to 122.1° ± 2.9° and OCA 90.8 ± 3.6°, suggesting that the PDMS/PU (95:5) with 3 wt.% SiO₂ composite film with surface modified by the soft lithography process could be employed for antifouling application.

Permanent, Antimicrobial Coating to Rapidly Kill and Prevent Transmission of Bacteria, Fungi, Influenza, and SARS-CoV-2

Microbial adhesion and contamination on shared surfaces can lead to life-threatening infections with serious impacts on public health, economy, and clinical practices. The traditional use of chemical disinfectants for sanitization of surfaces, however, comes with its share of health risks, such as hazardous effects on the eyes, skin, and respiratory tract, carcinogenicity, as well as environmental toxicity. To address this, we have developed a nonleaching quaternary small molecule (QSM)-based sprayable coating which can be fabricated on a wide range of surfaces such as nylon, polyethylene, surgical mask, paper, acrylate, and rubber in a one-step, photocuring technique. This contact-active coating killed pathogenic bacteria and fungi including drug-resistant strains of Staphylococcus aureus and Candida albicans within 15-30 min of contact. QSM coatings withstood multiple washes, highlighting their durability. Interestingly, the coated surfaces exhibited rapid killing of pathogens, leading to the prevention of their transmission upon contact. The coating showed membrane disruption of bacterial cells in fluorescence and electron microscopic investigations. Along with bacteria and fungi, QSM-coated surfaces also showed the complete killing of high loads of influenza (H1N1) and SARS-CoV-2 viruses within 30 min of exposure. To our knowledge, this is the first report of a coating for multipurpose materials applied in high-touch public places, hospital equipment, and clinical consumables, rapidly killing drug-resistant bacteria, fungi, influenza virus, and SARS-CoV-2.

Polymeric Coatings and Antimicrobial Peptides as Efficient Systems for Treating Implantable Medical Devices Associated-Infections

Many infections are associated with the use of implantable medical devices. The excessive utilization of antibiotic treatment has resulted in the development of antimicrobial resistance. Consequently, scientists have recently focused on conceiving new ways for treating infections with a longer duration of action and minimum environmental toxicity. One approach in infection control is based on the development of antimicrobial coatings based on polymers and antimicrobial peptides, also termed as “natural antibiotics”.

Modification of Polysulfone Ultrafiltration Membranes via Addition of Anionic Polyelectrolyte Based on Acrylamide and Sodium Acrylate to the Coagulation Bath to Improve Antifouling Performance in Water Treatment

Surface modification of polysulfone ultrafiltration membranes was performed via addition of an anionic polymer flocculant based on acrylamide and sodium acrylate (PASA) to the coagulation bath upon membrane preparation by non-solvent induced phase separation (NIPS). The effect of PASA concentration in the coagulant at different coagulation bath temperatures on membrane formation time, membrane structure, surface roughness, hydrophilic-hydrophobic balance of the skin layer, surface charge, as well as separation and antifouling performance was studied. Scanning electron microscopy (SEM), atomic force microscopy (AFM), Fourier transform infrared (FTIR) spectroscopy, contact angle and zeta potential measurements were utilized for membrane characterization. Membrane barrier and antifouling properties were evaluated in ultrafiltration of model solutions containing human serum albumin and humic acids as well as with real surface water. PASA addition was found to affect the kinetics of phase separation leading to delayed demixing mechanism of phase separation due to the substantial increase of coagulant viscosity, which is proved by a large increase of membrane formation time. Denser and thicker skin layer is formed and formation of macrovoids in membrane matrix is suppressed. FTIR analysis confirms the immobilization of PASA macromolecules into the membrane skin layer, which yields improvement of hydrophilicity and change of zeta potential. Modified membrane demonstrated better separation and antifouling performance in the ultrafiltration of humic acid solution and surface water compared to the reference membrane.

A Low-Cost Biomimetic Heterostructured Multilayer Membrane with Geopolymer Microparticles for Broad-Spectrum Water Purification

Membranes have received wide interest in water purification. However, the development of a low-cost and eco-friendly membrane with the desired structure for broad-spectrum water purification still remains a great challenge. Inspired by the hierarchical structure and functions of wood, a heterostructured multilayer membrane fabricated through a facile and "green" layer-by-layer self-assembly method was reported in this study. Specifically, the hydrophilic geopolymer microparticles were doped into sodium alginate matrix to construct "xylem" layers with numerous microchannels, and chitosan was used to build "phloem" layers with dense structures. The resultant biomimetic multilayer membrane displayed a distinct heterostructure and provided the desired rejection to different kinds of pollutants including nanoparticles, soluble dyes, and heavy metal ions, as well as emulsified oil droplets. Furthermore, the biomimetic membrane exhibited a superior stability in a long-term operation and an excellent recyclability for multiple usages for oil droplets removal. The proposed biomimetic membrane prepared in a completely "green" way possesses great potential in practical application for water purification and separation.