Hierarchical Structural Evolution of Zn2GeO4 in Binary Solvent and Its Effect on Li-ion Storage Performance

Microwave-Assisted Metal-Organic Frameworks Derived Synthesis of Zn2GeO4 Nanowire Bundles for Lithium-Ion Batteries

Germanium-based multi-metallic-oxide materials have advantages of low activation energy, tunable output voltage, and high theoretical capacity. However, they also exhibit unsatisfactory electronic conductivity, sluggish cation kinetics, and severe volume change, resulting in inferior long-cycle stability and rate performance in lithium-ion batteries (LIBs). To solve these problems, we synthesize metal-organic frameworks derived from rice-like Zn2GeO4 nanowire bundles as the anode of LIBs via a microwave-assisted hydrothermal method, minimizing the particle size and enlarging the cation's transmission channels, as well as, enhancing the electronic conductivity of the materials. The obtained Zn2GeO4 anode exhibits superior electrochemical performance. A high initial charge capacity of 730 mAhg-1 is obtained and maintained at 661 mAhg-1 after 500 cycles at 100 mA g-1 with a small capacity degradation ratio of ~0.02% for each cycle. Moreover, Zn2GeO4 exhibits a good rate performance, delivering a high capacity of 503 mA h g-1 at 5000 mA g-1. The good electrochemical performance of the rice-like Zn2GeO4 electrode can be attributed to its unique wire-bundle structure, the buffering effect of the bimetallic reaction at different potentials, good electrical conductivity, and fast kinetic rate.

In Situ Construction of Zn2Mo3O8/ZnO Hierarchical Nanosheets on Graphene as Advanced Anode Materials for Lithium-Ion Batteries

Transition-metal oxides as anodes for lithium-ion batteries (LIBs) have attracted enormous interest because of their high theoretical capacity, low cost, and high reserve abundance. Unfortunately, they commonly suffer from poor electronic and ionic conductivity and relatively large volume expansion during discharge/charge processes, thereby triggering inferior cyclic performance and rate capability. Herein, a molybdenum-zinc bimetal oxide-based composite structure (Zn₂Mo₃O₈/ZnO/rGO) with rectangular Zn₂Mo₃O₈/ZnO nanosheets uniformly dispersed on reduced graphene oxide (rGO) has been prepared by using a simple and controllable cyanometallic framework template method. The Zn₂Mo₃O₈/ZnO rectangular nanosheets with desirable porous features are composed of nanocrystalline subunits, facilitating the exposure of abundant active sites and providing sufficient contact with the electrolyte. Benefiting from the composition and structural merits as well as the induced synergistic effects, the Zn₂Mo₃O₈/ZnO/rGO composite as LIB anodes delivers superior electrochemical properties, including high reversible capacity (960 mA h g^-1 after 100 cycles at 200 mA g^-1), outstanding rate performance (417 mA h g^-1 at 10,000 mA g^-1), and admirable long-term cyclic stability (862 mA h g^-1 after 400 cycles at 1000 mA g^-1). The mechanism of lithium storage and the formation of SEI film are systematically elucidated. This work provides an effective strategy for synthesizing promising Mo-cluster compound-based anodes for high-performance LIBs.

Size-controllable synthesis of Zn2GeO4 hollow rods supported on reduced graphene oxide as high-capacity anode for lithium-ion batteries

Germanium-based ternary oxides have aroused wide attention as an anode for high-performance lithium-ion batteries (LIBs). Nevertheless, they usually suffer a large volume expansion and rapid capacity fading during lithiation/delithiation cycles. To address this issue, herein, Zn₂GeO₄/RGO composites are synthesized with Zn₂GeO₄ hollow rods in-situ grown on reduced graphene oxide (RGO) sheets. The Zn₂GeO₄ hollow rods can be facilely adjusted from nano- to micro-size. The lithium storage performances of the composites strongly depend on the size of Zn₂GeO₄ hollow rods and the content of RGO. The optimized Zn₂GeO₄/RGO composite exhibits a pseudocapacitance-dominated Li⁺ storage performance, with a large reversible capacity of 1005 mAh g^-1 after 100 cycles at 0.5 A g^-1, an excellent rate capability (515 mAh g^-1 at a high rate of 5 A g^-1) and a good long cycling stability of 500 cycles with a low capacity loss of 0.05% per cycle at 1 A g^-1. The outstanding electrochemical performance can be attributed to the unique composition and microstructure of the material as well as the synergistic effect of the conductive RGO sheets and the hollow Zn₂GeO₄ nanostructure. This work provides a promising anode for high-performance LIBs and a useful inspiration for further improving the Ge-based ternary oxide anodes.

Decoding of Oxygen Network Distortion in a Layered High-Rate Anode by In Situ Investigation of a Single Microelectrode

Sluggish conversion reactions severely impair the rate capability for lithium storage, which is the main disadvantage of the conversion-type anode materials. Here, the microplatform based on a single microelectrode is designed and utilized for the fundamental understanding of the conversion reaction. The kinetic-favorable layered structure of the anode material is on-site synthesized in the microplatform. The in situ characterization reveals that introducing an oxygen network distortion in the layered oxide anode effectively circumvents the severe passivation of the electrode material by lithium oxide, thus leading to highly reversible conversion reactions. As a result, the high-rate capability of the conversion-type anode materials is realized. The on-site synthesis strategy is further applied in the large-scale synthesis of nanomaterials for lithium-ion batteries. As such, oxide nanorods with the layered structure are synthesized by a facile chemical strategy, showing high rate performance (574 mAh g^-1 at 10 A g^-1). This work unveils the beneficial effect of oxygen network distortion in the layered anode for conversion reactions over cycling, thus providing an alternative strategy to enhance the rate capability of conversion-type anodes for lithium storage.

Hierarchical porous CoxFe3−xO4 nanocubes obtained by calcining Prussian blue analogues as anodes for lithium-ion batteries

Prussian blue analogue derived hierarchical porous Co_xFe_3−xO₄ nanocubes applied as LIBs anode material can provide large space to buffer volume expansion during the Li⁺ insertion/extraction processes and enhanced electrochemical performance.

Hierarchical Porous NiO/β-NiMoO4 Heterostructure as Superior Anode Material for Lithium Storage

Ternary transition metal oxides (TTMOs) have attracted considerable attention for rechargeable batteries because of their fascinating properties. However, the unsatisfactory electrochemical performance originating from the poor intrinsic electronic conductivity and inferior structural stability impedes their practical applications. Here, the novel hierarchical porous NiO/β-NiMoO₄ heterostructure is fabricated, and exhibits high reversible capacity, superior rate capability, and excellent cycling stability in Li-ion batteries (LIBs), which is much better than the corresponding single-phase NiMoO₄ and NiO materials. The significantly enhanced electrochemical properties can be attributed to its superior structural characteristics, including the large surface area, abundant pores, fast charge transfer, and catalytic effect of the intermediate product of metallic nickel. The NiO/β-NiMoO₄ heterostructure delivers a high capacity of 1314 mA h g^-1 at 0.2 A g^-1 after 100 cycles. Furthermore, even after 400 cycles at 1 A g^-1 , the reversible capacity remains at around 500 mA h g^-1 . These results indicate that the NiO/β-NiMoO₄ heterostructure shows great potential as an anode material for high-performance LIBs.

Enhanced lithium storage performances of novel layered nickel germanate anodes inspired by the spatial arrangement of lotus leaves

The rapid capacity degradation of Ge-based materials hinders their practical application for next generation lithium ion batteries, which could be solved by synthesizing Ge-containing ternary oxides, with new structures and hybridizing with carbon nanomaterials. Herein, novel Ni3Ge2O5(OH)4 nanosheets were synthesized and distributed in situ on reduced graphene oxide (RGO) sheets, with both flat-lying and vertically-grown spatial distributions to imitate the growth of lotus leaves. These two types of Ni3Ge2O5(OH)4 nanosheets enhance their efficient contact with RGO, and increase the mass loading of active materials. Furthermore, the interfacial bonds between RGO sheets and Ni3Ge2O5(OH)4 nanosheets are introduced to improve the diffusion rate of lithium ions. The RGO sheets act as a buffer matrix to sustain the volume change and prevent the nanosheets from aggregation. Consequently, the chemically bonded Ni3Ge2O5(OH)4/RGO hybrid delivers a high specific capacity of 863 mA h g-1 over 75 cycles, which is much higher than those for neat Ni3Ge2O5(OH)4 nanosheets or the hybrid without the interfacial bonding. This study provides a novel perspective for designing high-performance Ge-based anode materials for advanced lithium ion batteries.

Hierarchically Nanostructured Transition Metal Oxides for Lithium-Ion Batteries

Lithium-ion batteries (LIBs) have been widely used in the field of portable electric devices because of their high energy density and long cycling life. To further improve the performance of LIBs, it is of great importance to develop new electrode materials. Various transition metal oxides (TMOs) have been extensively investigated as electrode materials for LIBs. According to the reaction mechanism, there are mainly two kinds of TMOs, one is based on conversion reaction and the other is based on intercalation/deintercalation reaction. Recently, hierarchically nanostructured TMOs have become a hot research area in the field of LIBs. Hierarchical architecture can provide numerous accessible electroactive sites for redox reactions, shorten the diffusion distance of Li-ion during the reaction, and accommodate volume expansion during cycling. With rapid research progress in this field, a timely account of this advanced technology is highly necessary. Here, the research progress on the synthesis methods, morphological characteristics, and electrochemical performances of hierarchically nanostructured TMOs for LIBs is summarized and discussed. Some relevant prospects are also proposed.

Preparation of Lithium Titanate/Reduced Graphene Oxide Composites with Three-Dimensional "Fishnet-Like" Conductive Structure via a Gas-Foaming Method for High-Rate Lithium-Ion Batteries

With use of ammonium chloride (NH₄Cl) as the pore-forming agent, three-dimensional (3D) "fishnet-like" lithium titanate/reduced graphene oxide (LTO/G) composites with hierarchical porous structure are prepared via a gas-foaming method. Scanning electron microscopy and transmission electron microscopy images show that, in the composite prepared with the NH₄Cl concentration of 1 mg mL^-1 (1-LTO/G), LTO particles with sizes of 50-100 nm disperse homogeneously on the 3D "fishnet-like" graphene. The nitrogen-sorption analyses reveal the existence of micro-/mesopores, which is attributed to the introduction of NH₄Cl into the gap between the graphene sheets that further decomposes into gases and produces hierarchical pores during the thermal treatment process. The loose and porous structure of 1-LTO/G composites enables the better penetration of electrolytes, providing more rapid diffusion channels for lithium ion. As a result, the 1-LTO/G electrode delivers an ultrahigh specific capacity of 176.6 mA h g^-1 at a rate of 1 C. Even at 3 and 10 C, the specific capacity can reach 167.5 and 142.9 mA h g^-1, respectively. Moreover, the 1-LTO/G electrode shows excellent cycle performance with 95.4% capacity retention at 10 C after 100 cycles. The results demonstrate that the LTO/G composite with these properties is one of the most promising anode materials for lithium-ion batteries.

Zn2GeO4 nanorods grown on carbon cloth as high performance flexible lithium-ion battery anodes

A novel strategy was proposed for the simultaneous preparation of a high performance flexible Zn₂GeO₄/CC electrode. The as-formed composites exhibited high reversible lithium storage capacity, long cyclability, and excellent rate capability.

Graphene aerogel supported crystalline ZnO@amorphous Zn2GeO4 core–shell hierarchical structure for lithium storage

A crystalline–amorphous core–shell ZnO/Zn₂GeO₄/graphene aerogel with a three-dimensional structure has been successfully fabricated and shows enhanced stability and electrochemical performances.