Enhanced H2O2 Production at Reductive Potentials from Oxidized Boron-Doped Ultrananocrystalline Diamond Electrodes

Advances in Two-Electron Water Oxidation Reaction for Hydrogen Peroxide Production: Catalyst Design and Interface Engineering

Hydrogen peroxide (H2O2) is a versatile and zero-emission material that is widely used in the industrial, domestic, and healthcare sectors. It is clear that it plays a critical role in advancing environmental sustainability, acting as a green energy source, and protecting human health. Conventional production techniques focused on anthraquinone oxidation, however, electrocatalytic synthesis has arisen as a means of utilizing renewable energy sources in conjunction with available resources like oxygen and water. These strides represent a substantial change toward more environmentally and energy-friendly H2O2 manufacturing techniques that are in line with current environmental and energy goals. This work reviews recent advances in two-electron water oxidation reaction (2e-WOR) electrocatalysts, including design principles and reaction mechanisms, examines catalyst design alternatives and experimental characterization techniques, proposes standardized assessment criteria, investigates the impact of the interfacial milieu on the reaction, and discusses the value of in situ characterization and molecular dynamics simulations as a supplement to traditional experimental techniques and theoretical simulations. The review also emphasizes the importance of device design, interface, and surface engineering in improving the production of H2O2. Through adjustments to the chemical microenvironment, catalysts can demonstrate improved performance, opening the door for commercial applications that are scalable through tandem cell development.

Single atomic Ru in TiO2 boost efficient electrocatalytic water oxidation to hydrogen peroxide

Electrocatalytic two-electron water oxidation affords a promising approach for distributed production of H₂O₂ using electricity. However, it suffers from the trade-off between the selectivity and high production rate of H₂O₂ due to the lack of suitable electrocatalysts. In this study, single atoms of Ru were controllably introduced into titanium dioxide to produce H₂O₂ through an electrocatalytic two-electron water oxidation reaction. The adsorption energy values of OH intermediates could be tuned by introducing Ru single atoms, offering superior H₂O₂ production under high current density. Notably, a Faradaic efficiency of 62.8% with an H₂O₂ production rate of 24.2 μmol min^-1 cm^-2 (>400 ppm within 10 min) was achieved at a current density of 120 mA cm^-2. Consequently, herein, the possibility of high-yield H₂O₂ production under high current density was demonstrated and the importance of regulating intermediate adsorption during electrocatalysis was evidenced.

Carbon-based materials for photo- and electrocatalytic synthesis of hydrogen peroxide

The high demand for hydrogen peroxide (H₂O₂) has been dominantly supplied by the anthraquinone process for various applications globally, including chemical synthesis and wastewater treatment. However, the centralized manufacturing and intensive energy input and waste output are significant challenges associated with this process. Accordingly, the on-site production of H₂O₂via electro- and photocatalytic water oxidation and oxygen reduction partially is greener and easier to handle and has recently emerged with extensive research aiming to seek active, selective and stable catalysts. Herein, we review the current status and future perspectives in this field focused on carbon-based catalysts and their hybrids, since they are relatively inexpensive, bio-friendly and flexible for structural modulation. We present state-of-the-art progress, typical strategies for catalyst engineering towards selective and active H₂O₂ production, discussion on electro- and photochemical mechanisms and H₂O₂ formation through both reductive and oxidative reaction pathways, and conclude with the key challenges to be overcome. We expect promising developments would be inspired in the near future towards practical decentralized H₂O₂ production and its direct use.

Electrogenerated Chemiluminescence by in Situ Production of Coreactant Hydrogen Peroxide in Carbonate Aqueous Solution at a Boron-Doped Diamond Electrode

An electrogenerated chemiluminescence (ECL) system by in situ coreactant production, where Ru(bpy)₃²⁺ emission is generated at a boron-doped diamond (BDD) electrode, is presented. The system takes advantage of the unique properties of BDD to promote oxidation of carbonate (CO₃^2-) into peroxydicarbonate (C₂O₆^2-), which further reacts with water to form hydrogen peroxide (H₂O₂), which acts as a coreactant for Ru(bpy)₃²⁺ ECL. Investigation of the mechanism reveals that ECL emission is triggered by the reduction of H₂O₂ to hydroxyl radicals (OH^•), which later react with the reduced Ru(bpy)₃⁺ molecules to form excited states, followed by light emission. The ECL signal was found to increase with the concentration of CO₃^2-; therefore, with the concentration of electrogenerated H₂O₂, although at the same time, higher concentrations of H₂O₂ can quench the ECL emission, resulting in a decrease in intensity. The carbonate concentration, pH, and oxidation parameters, such as potential and time, were optimized to find the best emission conditions.

Hydrogen peroxide generation from O2 electroreduction for environmental remediation: A state-of-the-art review

The electrochemical production of hydrogen peroxide (H2O2) by 2-electron oxygen reduction reaction (ORR) is an attractive alternative to the present complex anthraquinone process. The objective of this paper is to provide a state-of-the-arts review of the most important aspects of this process. First, recent advances in H2O2 production are reviewed and the advantages of H2O2 electrogeneration via 2-electron ORR are highlighted. Second, the selectivity of the ORR pathway towards H2O2 formation as well as the development process of H2O2 production are presented. The cathode characteristics are the decisive factors of H2O2 production. Thus the focus is shifted to the introduction of commonly used carbon cathodes and their modification methods, including the introduction of other active carbon materials, hetero-atoms doping (i.e., O, N, F, B, and P) and decoration with metal oxides. Cathode stability is evaluated due to its significance for long-term application. Effects of various operational parameters, such as electrode potential/current density, supporting electrolyte, electrolyte pH, temperature, dissolved oxygen, and current mode on H2O2 production are then discussed. Additionally, the environmental application of electrogenerated H2O2 on aqueous and gaseous contaminants removal, including dyes, pesticides, herbicides, phenolic compounds, drugs, VOCs, SO2, NO, and Hg0, are described. Finally, a brief conclusion about the recent progress achieved in H2O2 electrogeneration via 2-electron ORR and an outlook on future research challenges are proposed.

Electrochemical oxidation disinfects urban stormwater: Major disinfection mechanisms and longevity tests

Although electrochemical oxidation (ECO) has shown excellent potential for disinfecting wastewater and surface waters, its application on urban stormwater has been rarely tested. In order to improve stormwater ECO design, this paper explores the major inactivation processes using Boron Doped Diamond (BDD) and titanium Dimensional Stable Anodes (DSA). Both BDD and DSA showed comparable disinfection rates. The mechanism study suggested that BDD relied on hydroxyl radical and the presence of chloride ions, while DSA disinfected stormwater mainly via the production of free‑chlorine. A deterioration study carried out at a catchment in Melbourne, showed a steady performance for BDD and revealed that DSA's performance degraded with time, likely linked to the high operational voltage required for specific chemistry of stormwater. Scanning Electron Microscopes and an Energy Dispersive X-ray Detector tests confirmed elemental losses occurred on the DSA surface, together with an aluminium/silicon coating layer potentially sourced from the stormwater clayish sediments. Furthermore, disinfection by-products in electrochemical disinfected stormwater using either BDD or DSA were at least one order of magnitude lower than the Australia Drinking Water Guidelines limits. The mechanism and long-term study demonstrated that careful anode selection is required as some anodes will deteriorate in stormwater matrices faster than others.

Improved blackwater disinfection using potentiodynamic methods with oxidized boron-doped diamond electrodes

Electrochemical disinfection (ECD) has become an important blackwater disinfection technology. ECD is a promising solution for the 2 billion people without access to conventional sanitation practices and in areas deficient in basic utilities (e.g., sewers, electricity, waste treatment). Here, we report on the disinfection of blackwater using potential cycling compared to potentiostatic treatment methods in chloride-containing and chloride-free solutions of blackwater (i.e., untreated wastewater containing feces, urine, and flushwater from a toilet). Potentiodynamic treatment is demonstrated to improve disinfection energy efficiency of blackwater by 24% and 124% compared to static oxidation and reduction methods, respectively. The result is shown to be caused by electrochemical advanced oxidation processes (EAOP) and regeneration of sp²-surface-bonded carbon functional groups that serve the dual purpose of catalysts and adsorption sites of oxidant intermediates. Following 24 h electrolysis in blackwater, electrode fouling is shown to be minimized by the potential cycling method when compared to equivalent potentiostatic methods. The potential cycling current density is 40% higher than both the static oxidative and reductive methods. This work enhances the understanding of oxygen reduction catalysts using functionalized carbon materials and electrochemical disinfection anodes, both of which have the potential to bring a cost-effective, energy efficient, and practical solution to the problem of disinfecting blackwater.

Electro-Microbiology as a Promising Approach Towards Renewable Energy and Environmental Sustainability

Microbial electrochemical technologies provide sustainable wastewater treatment and energy production. Despite significant improvements in the power output of microbial fuel cells (MFCs), this technology is still far from practical applications. Extracting electrical energy and harvesting valuable products by electroactive bacteria (EAB) in bioelectrochemical systems (BESs) has emerged as an innovative approach to address energy and environmental challenges. Thus, maximizing power output and resource recovery is highly desirable for sustainable systems. Insights into the electrode-microbe interactions may help to optimize the performance of BESs for envisioned applications, and further validation by bioelectrochemical techniques is a prerequisite to completely understand the electro-microbiology. This review summarizes various extracellular electron transfer mechanisms involved in BESs. The significant role of characterization techniques in the advancement of the electro-microbiology field is discussed. Finally, diverse applications of BESs, such as resource recovery, and contributions to the pursuit of a more sustainable society are also highlighted.