Synergistically Enhanced Electrochemical Performance of Ni3S4-PtX (X = Fe, Ni) Heteronanorods as Heterogeneous Catalysts in Dye-Sensitized Solar Cells

Synergy of single atoms and sulfur vacancies for advanced polysulfide-iodide redox flow battery

Aqueous redox flow batteries (RFBs) incorporating polysulfide/iodide chemistries have received considerable attention due to their safety, high scalability, and cost-effectiveness. However, the sluggish redox kinetics restricted their output energy efficiency and power density. Here we designed a defective MoS2 nanosheets supported Co single-atom catalyst that accelerated the transformation of S2-/Sx2- and I-/I3- redox couples, hence endow the derived polysulfide-iodide RFB with an initial energy efficiency (EE) of 87.9% and an overpotential of 113 mV with an average EE 80.4% at 20 mA cm-2 and 50% state-of-charge for 50 cycles, and a maximal power density of 95.7 mW cm-2 for an extended cycling life exceeding 850 cycles at 10 mA cm-2 and 10% state-of-charge. In situ experimental and theoretical analyses elucidate that Co single atoms induce the generation of abundant sulfur vacancies in MoS2 via a phase transition process, which synergistically contributed to the enhanced adsorption of reactants and key reaction intermediates and improved charge transfer, resulting in the enhanced RFB performance.

Phase-Selective Synthesis of Cobalt Sulfide Heterostructure Catalysts as Efficient Counter Electrodes in Dye-Sensitized Solar Cells

Developing a cost-saving, high-efficiency, and simple synthesis of counter electrode (CE) material to replace pricy Pt for dye-sensitized solar cells (DSSCs) has become a research hotspot. Owing to the electronic coupling effects between various components, semiconductor heterostructures can significantly enhance the catalytic performance and endurance of counter electrodes. However, the strategy to controllably synthesize the same element in several phase heterostructures used as the CE in DSSCs is still absent. Here, we fabricate well-defined CoS2 /CoS heterostructures and use them as CE catalysts in DSSCs. The as-designed CoS2 /CoS heterostructures display high catalytic performance and endurance for the triiodide reduction in DSSCs thanks to the combined and synergistic effects. As a result, a DSSC with CoS2 /CoS achieves a high energy conversion with an efficiency of 9.47 % under standard simulated solar radiation, surpassing that of pristine Pt-based CE (9.20 %). Besides, the CoS2 /CoS heterostructures possess a quick activity initiation process and extended stability, broadening their potential applications in various areas. Therefore, our proposed synthetic approach could offer new insights for synthesizing functional heterostructure materials with improved catalytic activities in DSSCs.

Novel insight into charge transfer regulation based on carrier density-dependent Ag/ITO composite films

Cosputtering technology was utilized to prepare a Ag and indium tin oxide (ITO) composite on a flat polystyrene (PS) microsphere array. The carrier density estimated by Hall effect testing of different Sn concentrations in the cosputtered films can be tuned from 1018 to 1020 cm-3. The bandgap calculated based on ultraviolet photoelectron spectroscopy can be adjusted within the range of 3.95-4.02 eV. We explored the possible mechanism of charge transfer (CT) by varying the bandgap and explained the causes of the surface-enhanced Raman scattering (SERS). Surprisingly, a synchronous change in the CT process with the carrier density was discovered. This observation suggests that the CT process can be precisely regulated by changes in the composition of the metal-semiconductor nanostructures. Our study provides a reference for the application of Ag/ITO films as alternative near-infrared plasmonic materials.

α-Fe2O3 hollow meso-microspheres grown on graphene sheets function as a promising counter electrode in dye-sensitized solar cells

Although nanoparticles, nanorods, and nanosheets of α-Fe₂O₃ on graphene sheets have been synthesized, it remains a challenge to grow 3D α-Fe₂O₃ nanomaterials with more sophisticated compositions and structures on the graphene sheets. Herein, we demonstrate a facile solvothermal route under controlled conditions to successfully fabricate 3D α-Fe₂O₃ hollow meso–microspheres on the graphene sheets (α-Fe₂O₃/RGO HMM). Attributed to the combination of the catalytic features of α-Fe₂O₃ hollow meso–microspheres and the high conductivity of graphene, α-Fe₂O₃/RGO HMM exhibited promising electrocatalytic performance as a counter electrode in dye-sensitized solar cells (DSSCs). The DSSCs fabricated with α-Fe₂O₃ HMM displayed high power conversion efficiency of 7.28%, which is comparable with that of Pt (7.71%).

Although nanoparticles, nanorods, and nanosheets of α-Fe₂O₃ on graphene sheets have been synthesized, it remains a challenge to grow 3D α-Fe₂O₃ nanomaterials with more sophisticated compositions and structures on the graphene sheets.

Highly active nanostructured CoS2/CoS heterojunction electrocatalysts for aqueous polysulfide/iodide redox flow batteries

Aqueous polysulfide/iodide redox flow batteries are attractive for scalable energy storage due to their high energy density and low cost. However, their energy efficiency and power density are usually limited by poor electrochemical kinetics of the redox reactions of polysulfide/iodide ions on graphite electrodes, which has become the main obstacle for their practical applications. Here, CoS₂/CoS heterojunction nanoparticles with uneven charge distribution, which are synthesized in situ on graphite felt by a one-step solvothermal process, can significantly boost electrocatalytic activities of I⁻/I₃⁻ and S²⁻/S_x²⁻ redox reactions by improving absorptivity of charged ions and promoting charge transfer. The polysulfide/iodide flow battery with the graphene felt-CoS₂/CoS heterojunction can deliver a high energy efficiency of 84.5% at a current density of 10 mA cm⁻², a power density of 86.2 mW cm⁻² and a stable energy efficiency retention of 96% after approximately 1000 h of continuous operation.

Polysulfide/iodide redox flow batteries are promising due to low cost and high-solubility components, but are limited by energy efficiency and power density. Here the authors fabricate heterojunction electrocatalysts to achieve improved performance in a polysulfide/iodide redox flow battery.

Encapsulating CoS2–CoSe2 heterostructured nanocrystals in N-doped carbon nanocubes as highly efficient counter electrodes for dye-sensitized solar cells

The CoS₂–CoSe₂@N-doped carbon nanocubes were synthesized through simultaneous sulfurization and selenization of polydopamine coated Prussian blue analogs.

Enhanced electrocatalytic performance of nickel diselenide grown on graphene toward the reduction of triiodide redox couples

The promising activity of nickel diselenide (NiSe₂) towards electrocatalysis has made it especially attractive in energy conversion fields. However, NiSe₂ with high electrocatalytic performance always requires complicated fabrication or expensive conductive polymers, resulting in the scale-up still being challenging. Herein, we introduce a simple and cost-effective synthesis of NiSe₂ dispersed on the surface of graphene (NiSe₂/RGO NPs). NiSe₂/RGO NPs exhibited enhanced electrocatalytic performance and long-term stability for the reduction reaction of triiodide redox couples in dye-sensitized solar cells (DSSCs). Leveraging the advantageous features, the DSSC fabricated with NiSe₂/RGO NPs as CE had a smaller charge-transfer resistance (R_ct) value and higher short-circuit current density and fill factor than naked NiSe₂ NPs. Additionally, NiSe₂/RGO NPs achieved a PCE of 7.76%, higher than that of pure NiSe₂ (6.51%) and even exceeding that of Pt (7.56%). These prominent features demonstrated that the NiSe₂/RGO NPs in this work are a promising cheap and efficient electrocatalyst to replace state-of-the-art Pt.

The promising activity of nickel diselenide (NiSe₂) towards electrocatalysis has made it especially attractive in energy conversion fields.