Nanoscale Mobility of Aqueous Polyacrylic Acid in Dental Restorative Cements

Advances in Hydrogels for Periodontitis Treatment

Periodontitis is a common condition characterized by a bacterial infection and the disruption of the body's immune-inflammatory response, which causes damage to the teeth and supporting tissues and eventually results in tooth loss. Current therapy involves the systemic and local administration of antibiotics. However, the existing treatments cannot exert effective, sustained release and maintain an effective therapeutic concentration of the drug at the lesion site. Hydrogels are used to treat periodontitis due to their low cytotoxicity, exceptional water retention capability, and controlled drug release profile. Hydrogels can imitate the extracellular matrix of periodontal cells while offering suitable sites to load antibiotics. This article reviews the utilization of hydrogels for periodontitis therapy based on the pathogenesis and clinical manifestations of the disease. Additionally, the latest therapeutic strategies for smart hydrogels and the main techniques for hydrogel preparation have been discussed. The information will aid in designing and preparing future hydrogels for periodontitis treatment.

The influence of hydrothermal fatigue on the clinically relevant functional properties of conventional glass-ionomer cements

During their everyday service, the restorative dental materials are subjected to temperature changes which can be viewed as intensive in the context of the highest allowed temperatures for these materials. In this work, the effect of hydrothermal fatigue on the in vitro tribological performance, compression strength, microhardness, and surface roughness of glass-ionomer cements was studied. Samples of 3 commercially available cements were divided into the reference (aged 14 days) and thermocycled (20,000 cycles; 5-55 °C) groups. The results obtained show that functional properties of the specimens subjected to thermal fatigue significantly differ from the literature data on the cements aged at constant temperatures. The effect of hydrothermal fatigue on the functional properties of cements is discussed in the context of processes induced by exposure to variable temperatures.

Effect of Biosilicate® Addition on Physical-Mechanical and Biological Properties of Dental Glass Ionomer Cements

This study investigated the influence of incorporating Biosilicate^® on the physico-mechanical and biological properties of glass ionomer cement (GIC). This bioactive glass ceramic (23.75% Na₂O, 23.75% CaO, 48.5% SiO₂, and 4% P₂O₅) was incorporated by weight (5%, 10%, or 15%) into commercially available GICs (Maxxion R and Fuji IX GP). Surface characterization was made by SEM (n = 3), EDS (n = 3), and FTIR (n = 1). The setting and working (S/W time) times (n = 3) and compressive strength (CS) were analyzed (n = 10) according to ISO 9917-1:2007. The ion release (n = 6) was determined and quantified by ICP OES and by UV-Vis for Ca, Na, Al, Si, P, and F. To verify cell cytotoxicity, stem cells from the apical papilla (SCAP) were exposed to eluates (n = 3, at a ratio of 1.8 cm²/mL) and analyzed 24 h post-exposure. Antimicrobial activity against Streptococcus mutans (ATCC 25175, NCTC 10449) was analyzed by direct contact for 2 h (n = 5). The data were submitted for normality and lognormality testing. One-way ANOVA and Tukey's test were applied for the working and setting time, compressive strength, and ion release data. Data from cytotoxicity and antimicrobial activity were submitted for Kruskal-Wallis' testing and Dunn's post hoc test (α = 0.05). Among all experimental groups, only those with 5% (wt) of Biosilicate^® showed better surface quality. Only M5% showed a comparable W/S time to the original material (p = 0.7254 and p = 0.5912). CS was maintained for all Maxxion R groups (p > 0.0001) and declined for Fuji IX experimental groups (p < 0.0001). The Na, Si, P, and F ions released were significantly increased for all Maxxion R and Fuji IX groups (p < 0.0001). Cytotoxicity was increased only for Maxxion R with 5% and 10% of Biosilicate^®. A higher inhibition of S. mutans growth was observed for Maxxion R with 5% of Biosilicate^® (less than 100 CFU/mL), followed by Maxxion R with 10% of Biosilicate^® (p = 0.0053) and Maxxion R without the glass ceramic (p = 0.0093). Maxxion R and Fuji IX presented different behaviors regarding Biosilicate^® incorporation. The impacts on physico-mechanical and biological properties were different depending on the GIC, but therapeutic ion release was increased for both materials.

Water Dynamics in Cancer Cells: Lessons from Quasielastic Neutron Scattering

The severity of the cancer statistics around the globe and the complexity involving the behavior of cancer cells inevitably calls for contributions from multidisciplinary areas of research. As such, materials science became a powerful asset to support biological research in comprehending the macro and microscopic behavior of cancer cells and untangling factors that may contribute to their progression or remission. The contributions of cellular water dynamics in this process have always been debated and, in recent years, experimental works performed with Quasielastic neutron scattering (QENS) brought new perspectives to these discussions. In this review, we address these works and highlight the value of QENS in comprehending the role played by water molecules in tumor cells and their response to external agents, particularly chemotherapy drugs. In addition, this paper provides an overview of QENS intended for scientists with different backgrounds and comments on the possibilities to be explored with the next-generation spectrometers under construction.

Long-Term Water Balance Evaluation in Glass Ionomer Restorative Materials

The complex role of water in glass ionomer cement (polyalkenoate) dental restorative materials has been studied, but much of the present understanding concerning water balance within these materials is based on very early studies and short-term experiments. This study evaluated the nature of the water species of six conventional and four resin modified glass ionomer restorative materials over 3 years using thermogravimetric analysis techniques. Materials were prepared, placed in crucibles, and stored in physiologic phosphate buffered saline and evaluated at 24 h, 1 week, and then at 1, 3, 6, 9, 12, 18, 24, 30 and 36 months. All materials demonstrated a significant increase in unbound water percentage content but except for the resin modified materials, the enthalpy required to remove the unbound water species did not significantly change over 36 months. Also, bound water content percentage and removal enthalpy was established at 24 h, as no significant increase was noted in both bound water content and removal enthalpy over the course of this evaluation. This study suggests that unbound water species may increase with time and is loosely held except for the resin modified materials. Protective coatings placement and re-evaluation are prudent to prevent unbound water loss.

Broadband Wide-Angle VElocity Selector (BWAVES) neutron spectrometer designed for the SNS Second Target Station

A recently proposed wide-angle velocity selector (WAVES) device for choosing the velocity of detected neutrons after they have been scattered by the sample paves the way for inverted geometry neutron spectrometers with continuously adjustable final neutron wavelength. BWAVES broadband inverted geometry spectrometer proposed for the Second Target Station at the Spallation Neutron Source at Oak Ridge National Laboratory is designed using WAVES to simultaneously probe dynamic processes spanning 4.5 decades in time (energy transfer). This makes BWAVES a uniquely flexible instrument which can be viewed as either a quasielasitc neutron scattering (QENS) spectrometer with a practically unlimited (overlapping with the vibrational excitations) range of energy transfers, or a broadband inelastic vibrational neutron spectrometer with QENS capabilities, including a range of accessible momentum transfer (Q) and a sufficiently high energy resolution at the elastic line. The new capabilities offered by BWAVES will expand the application of neutron scattering in ways not possible with existing neutron spectrometers.

Revisiting the modeling of quasielastic neutron scattering from bulk water

Quasi-elastic neutron scattering (QENS) from bulk-water at 300 K, measured on the IRIS backscattering neutron spectrometer (ISIS, UK), is interpreted using the jump diffusion model (JDM), a “minimalistic” multi-timescale relaxation model (MRM) and molecular dynamics simulations (MD). In the case of MRM data analysis is performed in the time domain, where the relaxation of the intermediate scattering function is described by a stretched Mittag-Leffler function, Eα(−(|t|/τ)α). This function displays an asymptotic power law decay and contains the exponential relaxation function as a special case (α = 1). To further compare the two approaches, MD simulations of bulk water were performed using the SPCE force field and the resulting MD trajectories analysed using the nMoldyn software. We show that both JDM and MRM accurately describe the diffusion of bulk water observed by QENS at all length scales, and confirm that MD simulations do not fully describe the quantum effects of jump diffusion.

Hyperbranched Polyethylenimine-Tethered Multiple Emulsion-Templated Hierarchically Macroporous Poly(acrylic acid)-Al2O3 Nanocomposite Beads for Water Purification

Emulsion template-guided strategy has been used to produce porous architectures with exquisite structure, tailored morphology, and exclusive features for ubiquitous applications. Notwithstanding, the practical water remediation is often marred by their transport-limited behavior and fragility. To circumvent these conundrums, we prepared hierarchically porous poly(acrylic acid)-alumina nanocomposite beads by solidifying the droplets of emulsions jointly stabilized by the organic surfactants and alumina nanoparticles. By virtue of their positive charge, the alumina nanoparticles got entrapped within the poly(acrylic acid) scaffolds that excluded the risk of secondary contamination typically observed with conventional nanocomposites. Being amenable to surface modification, the carboxyl moieties of the beaded polymer were further exploited to covalently tether branched polyethylenimine throughout the exterior and interior surface of the porous matrix via a grafting-to approach. The macropores expedite an active fluid flow and easier adsorbate transport throughout the functionalized nanocomposites whose overall higher density of positive charge over a certain pH range electrostatically attracts and effectively adsorbs the negatively charged Cr(VI) complexes and anionic congo red ions/molecules from water. This proof-of-concept synthetic approach and postsynthetic modification offer an improved mechanical robustness to these macrosized multifunctional nanocomposite beads for their easier processing, thereby paving the way for the point-of-use water purification technology development.

Ferrocene-functionalized hybrid hydrogel dressing with high-adhesion for combating biofilm

Bacterial infection is a common phenomenon in the process of postoperative wound healing. In severe cases, it may even lead to life-threatening, which brings a heavy burden to the clinical treatment and causes huge losses to the society and economy. As one of the most commonly applied medical materials for wound treatment, hydrogel dressings are mainly used to cover and protect wounds and provide a favorable environment to facilitate wound healing. In this work, we developed an antibacterial hydrogel dressing (Fc-PAAM) with high adhesion, which is consisted of polyacrylamide (PAM) hydrogel framework and polyacrylic acid-functionalized (PAA) with ferrocene (Fc). Morphology, adhesion and pressure resistance of PAAM hydrogel were confirmed by using scanning electron microscope (SEM) and universal testing machine, and Fc decoration in the hydrogel network was well demonstrated by using Fourier transform infrared spectroscopy (FT-IR). Ultraviolet-visible spectroscopy (UV-vis) displayed that the Fc-PAAM hydrogel had excellent peroxidase-like activity as well. It not only exhibited prominent antimicrobial activity against Gram (+/-) bacteria, but also performed high efficiency in preventing the formation of biofilms. In addition, in vivo experiments indicated that this adhesive dressing could significantly prevent bacterial infections. Compared with other clinical treatment methods, this kind of hydrogel is not easy to cause bacterial resistance, and the used raw materials are easy to obtain and low in price, which can amplify the antibacterial properties of H₂O₂ and provide a new opportunity for the treatment of clinical bacterial infections.

Studies of the early stages of the dynamic setting process of chemically activated restorative glass-ionomer cements

Objective

To evaluate the early stages of the setting process of chemically activated restorative glass-ionomer cements (GICs).

Material and methods

Five GICs were evaluated (n = 5): Equia Forte (GC), Equia Forte HT (GC), Ketac Universal (3M ESPE), Maxxion R (FGM) and Riva Self Cure (SDI) by Thermography, Fourier Transform Infrared Attenuated Total Reflectance Spectroscopy (FTIR-ATR) and Gillmore needle indentation mechanical testing. The FTIR-ATR spectra showed the formation of metal carboxylates within the cements and enabled the stabilization time (ST) to be determined and the thermographic camera measured the temperature field images in the sample. Data were statistically analyzed by ANOVA and Tukey–Kramer (α = 5%).

Results

The Gillmore needle test showed that the order of hardening was opposite to the order of ST values determined by FTIR. The results with the thermographic camera showed two stages of temperature variation, which coincided with the evolution of specific infrared bands. The exception was Maxxion R, which showed only a single step change in temperature.

Conclusion

The early stages of the GIC setting reaction show temperature changes, both endothermic and exothermic, at specific times, confirming the occurrence of individual chemical reactions. The early setting involves reactions other than carboxylate formation.

Significance: This study gives further detail of the early stages of the setting of GICs, and past research regarding the setting reaction of GIC.

Ammonia Storage in Hydrogen Bond-Rich Microporous Polymers

The fascinating structural flexibility of porous polymers is highly attractive because it can result in optimized materials with specific host-guest interactions. Nevertheless, the fundamental mechanisms responsible for controlling the weak interactions of these hydrogen bond-rich networks-essential for developing smart task-specific materials used in recognition, capture, and sequestration processes-remain unexplored. Herein, by systematically comparing performance changes between poly(amic acid) (PAA)- and polycyclic imide (PI)-based porous polymers before and after NH₃ adsorption, the role of hydrogen bonds in conformational lability and responsiveness toward guest molecules is highlighted. By combining thermal gravimetric analysis with neutron spectroscopy supported by DFT calculations, we demonstrate that PAA's chemical and physical stability is enhanced by the presence of stronger host-guest interactions. This observation also emphasizes the idea that efficient adsorption relies on having a high number of sites, upon which gas molecules can adsorb with greater affinity via strong hydrogen bonding interactions.

Physical Properties of Glass Ionomer Cement Containing Pre-Reacted Spherical Glass Fillers

The aim of this study was to assess the effect of different commercial liquid phases (Ketac, Riva, and Fuji IX) and the use of spherical pre-reacted glass (SPG) fillers on cement maturation, fluoride release, compressive (CS) and biaxial flexural strength (BFS) of experimental glass ionomer cements (GICs). The experimental GICs (Ketac_M, Riva_M, FujiIX_M) were prepared by mixing SPG fillers with commercial liquid phases using the powder to liquid mass ratio of 2.5:1. FTIR-ATR was used to assess the maturation of GICs. Diffusion coefficient of fluoride (DF) and cumulative fluoride release (CF) in deionized water was determined using the fluoride ion specific electrode (n=3). CS and BFS at 24 h were also tested (n=6). Commercial GICs were used as comparisons. Riva and Riva_M exhibited rapid polyacrylate salt formation. The highest DF and CF were observed with Riva_M (1.65x10-9 cm2/s) and Riva (77 ppm) respectively. Using SPG fillers enhanced DF of GICs on average from ~2.5x10-9 cm2/s to ~3.0x10-9 cm2/s but reduced CF of the materials on average from ~51 ppm to ~42 ppm. The CS and BFS of Ketac_M (144 and 22 MPa) and Fuji IX_M (123 and 30 MPa) were comparable to commercial materials. Using SPG with Riva significantly reduced CS and BFS from 123 MPa to 55 MPa and 42 MPa to 28 MPa respectively. The use of SPG fillers enhanced DF but reduced CF of GICs. Using SPG with Ketac or Fuji IX liquids provided comparable strength to the commercial materials.

Magnetic Hierarchically Macroporous Emulsion-Templated Poly(acrylic acid)-Iron Oxide Nanocomposite Beads for Water Remediation

Tainting of waterbodies with noxious industrial waste is the gravest environmental concern of the day that continues to wreak inevitable havoc on human health. To cleanup these hard-to-remove life-threatening water contaminants, we have prepared hierarchically porous poly(acrylic acid) beads by emulsion templating. These emulsion-templated macroporous polymer beads not only mediate the synthesis of Fe₃O₄ nanoparticles inside their porous network using a coprecipitation approach but, in turn, create diverse anchoring sites to immobilize an additional poly(acrylic acid) active layer onto the nanocomposite beads. These post-synthetically modified nanocomposite beads with macropores and abundant acrylic acid moieties offer the ready mass transfer and fair advantage of relatively higher overall negative charge to efficiently adsorb lead [Pb(II)] and crystal violet with impressive performance-even superior to many of the materials explored in this regard so far. Furthermore, the strong entanglement of nanoparticles in the porous polymeric scaffolds tackles the curb of trade-off between all-round effective remediation and secondary pollution and the millimeter size eases their processing and recovery during the adsorption tests, thereby making these materials practically worthwhile.

Water dynamics in MCF-7 breast cancer cells: a neutron scattering descriptive study

Water mobility in cancer cells could be a powerful parameter to predict the progression or remission of tumors. In the present descriptive work, new insight into this concept was achieved by combining neutron scattering and thermal analyses. The results provide the first step to untangle the role played by water dynamics in breast cancer cells (MCF-7) after treatment with a chemotherapy drug. By thermal analyses, the cells were probed as micrometric reservoirs of bulk-like and confined water populations. Under this perspective we showed that the drug clearly alters the properties of the confined water. We have independently validated this idea by accessing the cellular water dynamics using inelastic neutron scattering. Finally, analysis of the quasi-elastic neutron scattering data allows us to hypothesize that, in this particular cell line, diffusion increases in the intracellular water in response to the action of the drug on the nanosecond timescale.