New Metal-Organic Frameworks for Chemical Fixation of CO2

A lanthanide MOF with nanostructured node disorder

Structural disorder can be used to tune the properties of functional materials and is an important tool that can be employed for the development of complex framework materials, such as metal-organic frameworks. Here we show the synthesis and structural characterization of a metal-organic framework, UoB-100(Dy). Average structure refinements indicate that the node is disordered between two orientations of the nonanuclear secondary building unit (SBU). By performing 3D diffuse scattering (DS) analysis and Monte Carlo (MC) simulations, we confirm the presence of strong correlations between the metal clusters of UoB-100(Dy). These nodes assemble into a complex nanodomain structure. Quantum mechanical calculations identify linker strain as the driving force behind the nanodomain structure. The implications of such a nanodomain structure for the magnetic, gas storage, and mechanical properties of lanthanide MOFs are discussed.

A MOF@MOF S-scheme Heterojunction with Lewis Acid-Base Sites Synergistically Boosts Cocatalyst-Free CO2 Cycloaddition

The photocatalytic cycloaddition reaction between CO2 and epoxide is one of the most promising green routes for CO2 utilization, for which high performance photocatalysts are intensely desired. Herein, we have constructed an S-scheme heterojunction of MIL-125@ZIF-67 modified by amino groups, which achieves a cyclic carbonate yield of as high as 99 % without employing any co-catalyst, outperforming the previously reported photocatalysts. In-situ diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) and in-situ electron paramagnetic resonance (EPR) spectroscopy reveal the important role of photogenerated electron migration from Lewis acid (Co) sites to the O atom of epoxide in triggering its ring-opening (the rate-determining step of CO2 cycloaddition reaction) under the assistance of photogenerated hole. Synergistically and concurrently, the Lewis base (amino groups) sites activate CO2 to CO2*, facilitating the following CO2 cycloaddition. Such a synergistic effect provides a most favorable approach to design efficient heterogeneous photocatalysts with dual/multiple-active sites for CO2 cycloaddition reaction.

Multifunctional Magnetic Chiral HKUST MOF Decorated by Triazine, Fe3O4, and Cu(l-Proline)2 Complex for Green and Mild Asymmetric Catalysis

A multifunctional magnetic chiral metal-organic framework (MOF) was developed for asymmetric applications by utilizing strategies of chiralization and multifunctionalization. Cu(l-proline)2-Triazine/Fe3O4@SiO2-NH2 was employed as a chiral secondary agent to synthesize a chiral hybrid nanocomposite within a MOF. The use of a chiral secondary agent efficiently induces chirality in an achiral MOF structure that cannot be directly chiralized. The HKUST-1@Cu(l-proline)2-Triazine/Fe3O4@SiO2-NH2 nanocomposite was afforded by first anchoring chiral Cu(l-proline)2 on the Triazine/Fe3O4@SiO2-NH2 surface and then encapsulating the Cu(l-proline)2-Triazine/Fe3O4@SiO2-NH2 nanoparticles with HKUST-1 via in situ ultrasonication synthesis. In the synthesis of the HKUST-1@Cu(l-proline)2-Triazine/Fe3O4@SiO2-NH2 nanocomposite, Cu(l-proline)2 was used as a chiral complex due to its Lewis acidic/basic hydroxyl groups, carboxylate carbonyl functional groups acting as Lewis bases, an active Cu site functioning as a Lewis acid center, and azine groups of TCT acting as Lewis bases, all synergistically interacting with the Lewis acidity of the Cu centers in HKUST-1. To assess these synergic effects, HKUST-1@Cu(l-proline)2-Triazine/Fe3O4@SiO2-NH2 was used in the formation of an asymmetric C-C bond in nitroaldol condensation and asymmetric cycloaddition of CO2 to epoxides. The findings demonstrated that under mild and green conditions, in both the asymmetric nitroalcohol condensation and the asymmetric cycloaddition of CO2, HKUST-1@Cu(l-proline)2-Triazine/Fe3O4@SiO2-NH2 had better enantioselectivity than the Cu(l-proline)2-Triazine/Fe3O4@SiO2-NH2 nanoparticles and a higher selectivity toward β-nitroalcohol and cyclic carbonate over the pure HKUST-1. Despite its simple and easy synthesis, HKUST-1@Cu(l-proline)2-Triazine/Fe3O4@SiO2-NH2 exhibited exceptional performance in the asymmetric nitroaldol condensation and asymmetric cycloaddition of CO2 to epoxides. Additionally, the mechanism of the reactions was depicted with reference to the total energy of the reactants, intermediates, and products.

Mixed-Linker Zr-Metal-Organic Framework with Improved Lewis Acidic Sites for CO2 Fixation Reaction Catalysis

Applying the mixed-linker strategy in synthesizing metal-organic frameworks (MOFs) has drawn considerable attention as a heterogeneous catalyst owing to their easy synthesis and different functional ligands in their frameworks. Following this strategy, we have developed a mixed linker Zr(IV)-based MOF, [Zr6O4(OH)4(FUM)n(PZDC-NO2)6-n] (PZDC-NO2 = 4-nitro-3,5-pyrazoledicarboxylic acid, FUM = fumaric acid) denoted as MOF-801(PZDC-NO2) synthesized via this strategy which possess an electron-withdrawing group (-NO2) on secondary linkers. The MOF-801(PZDC-NO2) has been fully characterized via various analyses, such as Fourier transform infrared, powder X-ray diffraction, 13C/1H nuclear magnetic resonance, XPS, TGA, and N2 adsorption/desorption, SEM, EDX, etc. By considering the concurrent existence of acid-base active sites and the synergistic role of these sites, this mixed-linker MOF was used as a catalyst for the cycloaddition reaction of CO2 and epoxides under mild without-solvent conditions. MOF-801(PZDC-NO2) displays significant catalytic performance by producing the highest catalytic conversion of epoxide to cyclic carbonate (93%) with a turnover number of 130.7 in 8 h reaction time and 100 °C temperature under low-pressure CO2 pressure. The mixed-linker Zr-MOF exhibits exceptional stability and reusability, maintaining its structure and functionality after consecutive cycles of utilization. Finally, the reaction mechanism was further investigated by density functional theory calculations. The total energy of the reactants, intermediates, and products involved in the process.

Bimetallic MnZn-MOF-74 with enhanced percentage of MnIII: Efficiently catalytic activity for direct oxidative carboxylation of olefins to cyclic carbonates under mild and solvent-free condition

Multi-functional MOF catalyst with oxidative- and acid- centers showed potential in olefins oxidative carboxylation to cyclic carbonates directly. In this work, a series of bimetallic MnZn-MOF-74 with different molar ratios of Mn and Zn were synthesized successfully through a one-pot facile method. Thoroughly characterization indicated that the existence of Zn regulated the valance state distribution of Mn in the obtained MnZn-MOF-74. Mn99.3Zn0.7-MOF-74 with the highest ratio of MnIII (61.3 %) performed the most efficient activity for olefin direct tandem oxidative carboxylation reaction using aqueous tert-butyl hydroperoxide oxidant under solvent-free condition of 90 °C, 1.0 MPa CO2 and 4 h. Mn99.3Zn0.7-MOF-74 also showed satisfactory versatility and recyclability. Based on the experiments, a feasible mechanism was presented. Thanks to the high ratio of active MnIII as main oxidative center, the coordination unsaturated bimetal Mn and Zn as Lewis-acid sites, O2- of metal - O as Lewis-base sites and combined effect with Bu4NBr cocatalyst, Mn99.3Zn0.7-MOF-74 presented efficient performance for the direct synthesis of cyclic carbonates from olefins. The metal Zn in MOF can regulate the valance state distribution of Mn and result in efficient catalytic property, presenting a potential avenue for direct oxidative carboxylation reaction of olefins to cyclic carbonates synthesis.

A robust aluminum-octacarboxylate framework with topology for selective capture of sulfur dioxide

The high structural diversity and porosity of metal-organic frameworks (MOFs) promote their applications in selective gas adsorption. The development of robust MOFs that are stable against corrosive SO2 remains a daunting challenge. Here, we report a highly robust aluminum-based MOF (HIAM-330) built on a 4-connected Al3(OH)2(COO)4 cluster and 8-connected octacarboxylate ligand with a (4,8)-connected scu topology. It exhibits a fully reversible SO2 uptake of 12.1 mmol g-1 at 298 K and 1 bar. It is capable of selective capture of SO2 over other gases (CO2, CH4, and N2) with high adsorption selectivities of 60, 330, and 3537 for equimolar mixtures of SO2/CO2, SO2/CH4, and SO2/N2, respectively, at 298 K and 1 bar. Breakthrough measurements verified the capability of HIAM-330 for selective capture of SO2 (2500 ppm) over CO2 or N2. High-resolution synchrotron X-ray powder diffraction of SO2 loaded HIAM-330 revealed the binding domains of adsorbed SO2 molecules and host-guest interactions.

Halogen-Decorated Metal-Organic Frameworks for Efficient and Selective CO2 Capture, Separation, and Chemical Fixation with Epoxides under Mild Conditions

In the present work, three novel halogen-appended cadmium(II) metal-organic frameworks [Cd2(L1)2(4,4'-Bipy)2]n·4n(DMF) (1), [Cd2(L2)2(4,4'-Bipy)2]n·3n(DMF) (2), and [Cd(L3)(4,4'-Bipy)]n·2n(DMF) (3) [where L1 = 5-{(4-bromobenzyl)amino}isophthalate; L2 = 5-{(4-chlorobenzyl)amino}isophthalate; L3 = 5-{(4-fluorobenzyl)amino}isophthalate; 4,4'-Bipy = 4,4'-bipyridine; and DMF = N,N'-dimethylformamide] have been synthesized under solvothermal conditions and characterized by various analytical techniques. The single-crystal X-ray diffraction analysis demonstrated that all the MOFs feature a similar type of three-dimensional structure having a binuclear [Cd2(COO)4(N)4] secondary building block unit. Moreover, MOFs 1 and 2 contain one-dimensional channels along the b-axis, whereas MOF 3 possesses a 1D channel along the a-axis. In these MOFs, the pores are decorated with multifunctional groups, i.e., halogen and amine. The gas adsorption analysis of these MOFs demonstrate that they display high uptake of CO2 (up to 5.34 mmol/g) over N2 and CH4. The isosteric heat of adsorption (Qst) value for CO2 at zero loadings is in the range of 18-26 kJ mol-1. In order to understand the mechanism behind the better adsorption of CO2 by our MOFs, we have also performed configurational bias Monte Carlo simulation studies, which confirm that the interaction between our MOFs and CO2 is stronger compared to those with N2 and CH4. Various noncovalent interactions, e.g., halogen (X)···O, Cd···O, and O···O, between CO2 and the halogen atom, the Cd(II) metal center, and the carboxylate group from the MOFs are observed, respectively, which may be a reason for the higher carbon dioxide adsorption. Ideal adsorbed solution theory (IAST) calculations of MOF 1 demonstrate that the obtained selectivity values for CO2/CH4 (50:50) and CO2/N2 (15:85) are ca. 28 and 193 at 273 K, respectively. However, upon increasing the temperature to 298 K, the selectivity value (S = 34) decreases significantly for the CO2/N2 mixture. We have also calculated the breakthrough analysis curves for all the MOFs using mixtures of CO2/CH4 (50:50) and CO2/N2 (50:50 and 15:85) at different entering gas velocities and observed larger retention times for CO2 in comparison with other gases, which also signifies the stronger interaction between our MOFs and CO2. Moreover, due to the presence of Lewis acidic metal centers, these MOFs act as heterogeneous catalysts for the CO2 fixation reactions with different epoxides in the presence of tetrabutyl ammonium bromide (TBAB), for conversion into industrially valuable cyclic carbonates. These MOFs exhibit a high conversion (96-99%) of epichlorohydrin (ECH) to the corresponding cyclic carbonate 4-(chloromethyl)-1,3-dioxolan-2-one after 12 h of reaction time at 1 bar of CO2 pressure, at 65 °C. The MOFs can be reused up to four cycles without compromising their structural integrity as well as without losing their activity significantly.

Functionalization of Magnetic UiO-66-NH2 with a Chiral Cu(l-proline)2 Complex as a Hybrid Asymmetric Catalyst for CO2 Conversion into Cyclic Carbonates

In this study, a chiral [Cu(l-proline)2] complex-modified Fe3O4@SiO2@UiO-66-NH2(Zr) metal-organic framework [Fe3O4@SiO2@UiO-66-NH-Cu(l-proline)2] via multifunctionalization strategies was designed and synthesized. One simple approach to chiralize an achiral MOF-structure that cannot be directly chiralized using a chiral secondary agent like 4-hydroxy-l-proline. Therefore, this chiral catalyst was synthesized with a simple and multistep method. Accordingly, Fe3O4@SiO2@UiO-66-NH2 has been synthesized via Fe3O4 modification with tetraethyl orthosilicate and subsequently with ZrCl4 and 2-aminoterephthalic acid. The presence of the silica layer helps to stabilize the Fe3O4 core, while the bonding between Zr4+ and the -OH groups in the silica layer promotes the development of Zr-MOFs on the Fe3O4 surface, and then the surfaces of the synthesized magnetic MOFs composite are functionalized with 1,2-dichloroethane and Cu(II) complex with 4-hydroxy-l-proline, [Cu(l-proline)2] to afford the magnetically chiral nanocatalyst. Multiple techniques were employed to characterize this magnetically chiral nanocatalyst such as Fourier transform infrared (FT-IR), X-ray photoelectron spectroscopy (XPS), field-emission scanning electron microscopy (FE-SEM), transmission electron microscopy (TEM), energy-dispersive X-ray spectrometry (EDX), powder X-ray diffraction (PXRD), circular dichroism (CD), inductively coupled plasma (ICP), thermogravimetric analysis (TGA), vibrating-sample magnetometry (VSM), and Brunauer-Emmett-Teller (BET) analyses. Moreover, a magnetically chiral nanocatalyst shows the asymmetric CO2 fixation reaction under solvent-free conditions at 80 °C and in ethanol under reflux conditions with up to 99 and 98% ee, respectively. Furthermore, the reaction mechanism was illustrated concerning the total energy of the reactant, intermediates and product, and the structural parameters were analyzed.

A Multivariate 2D Metal-Organic Framework with Open Metal Sites for Catalytic CO2 Cycloaddition and Cyanosilylation Reactions

This work reports the synthesis of a dual functional 2D framework, {[Zn2(4-tpom)2(oxdz)2]·4H2O}n (1), at room temperature, where a bent dicarboxylate, oxdz2- (4,4'-(1,3,4-oxadiazole-2,5-diyl)dibenzoate), and a neutral flexible N-donor linker, 4-tpom (tetrakis(4-pyridyloxymethylene)methane), are utilized. Its single-crystal X-ray analysis indicated a 2-fold interpenetrated 2D framework having tetracoordinated Zn(II) centers and dangling pyridyl groups. Its further characterization was carried out with elemental microanalysis, FTIR spectroscopy, TG analysis, and powder X-ray diffraction. The tetracoordinated Zn(II) centers as active Lewis acidic sites and the N atoms of 4-tpom as Lewis basic sites in 1 are explored for its functioning as a heterogeneous catalyst in two important reactions, (i) cycloaddition of CO2 with various epoxides and (ii) cyanosilylation reaction under solvent-free conditions. We could successfully show the cycloaddition of styrene oxide with CO2 (99% conversion) under balloon pressure with low catalyst (0.2-0.3 mol %) and cocatalyst (0.5-0.75 mol %) loadings, which is otherwise difficult to achieve. It was observed that all the substrates (aromatic and aliphatic), irrespective of their sizes, showed conversion percentage >99%. In the cyanosilylation reaction, a conversion of 96% was obtained with 1.5 mol % of 1 at room temperature for 12 h. This framework emerged as an excellent recyclable catalyst for both the reactions.

Physiochemical characterization of metal organic framework materials: A mini review

Metal-organic frameworks (MOFs) are promising materials offering exceptional performance across a myriad of applications, attributable to their remarkable physicochemical properties such as regular porosity, crystalline structure, and tailored functional groups. Despite their potential, there is a lack of dedicated reviews that focus on key physicochemical characterizations of MOFs for the beginners and new researchers in the field. This review is written based on our expertise in the synthesis and characterization of MOFs, specifically to provide a right direction for the researcher who is a beginner in this area. In this way, experimental errors can be reduced, and wastage of time and chemicals can be avoided when new researchers conduct a study. In this article, this topic is critically analyzed, and findings and conclusions are presented. We reviewed three well-known XRD techniques, including PXRD, single crystal XRD, and SAXS, which were used for XRD analysis depending on the crystal size and the quality of crystal morphology. The TGA profile was an effective factor for evaluating the quality of the activation process and for ensuring the successful investigation for other characterizations. The BET and pore size were significantly affected by the activation process and selective benzene chain cross-linkers. FTIR is a prominent method that is used to investigate the functional groups on pore surfaces, and this method is successfully used to evaluate the activation process, characterize functionalized MOFs, and estimate their applications. The most significant methods of characterization include the X-ray diffraction, which is utilized for structural identification, and thermogravimetric analysis (TGA), which is used for exploring thermal decomposition. It is important to note that the thermal stability of MOFs is influenced by two main factors: the metal-ligand interaction and the type of functional groups attached to the organic ligand. The textural properties of the MOFs, on the other hand, can be scrutinized through nitrogen adsorption-desorption isotherms experiments at 77 K. However, for smaller pore size, the Argon adsorption-desorption isotherm at 87.3 K is preferred. Furthermore, the CO2 adsorption isotherm at 273 K can be used to measure ultra-micropore sizes and sizes lower than these, which cannot be measured by using the N2 adsorption-desorption isotherm at 77 K. The highest BET was observed in high-valence MOFs that are constructed based on the metal-oxo cluster, which has an excellent ability to control their textural properties. It was found that the synthesis procedure (including the choice of solvent, cross-linker, secondary metal, surface functional groups, and temperature), activation method, and pressure significantly impact the surface area of the MOF and, by extension, its structural integrity. Additionally, Fourier-transform infrared spectroscopy plays a crucial role in identifying active MOF functional groups. Understanding these physicochemical properties and utilizing relevant characterization techniques will enable more precise MOF selection for specific applications.

Tuning the Catalytic Activity of Covalent Metal-Organic Frameworks for CO2 Cycloaddition Reactions

The development of efficient, recyclable and low-cost heterogeneous catalysts for conversion of carbon dioxide (CO2 ) into epoxides is highly desired, yet remain a challenge. Herein, we have prepared three two-dimensional (2D) copper(I) cyclic trinuclear units (Cu(I)-CTUs) based covalent metal-organic frameworks (CMOFs), namely JNM-13, JNM-14, and JNM-15, via a one-pot reaction by combination of coordination and dynamic covalent chemistry. Among them, JNM-15 contained the highest density of copper catalytic sites, and exhibited the highest capacity for adsorption of CO2 . More interestingly, JNM-15 delivered the highest catalytic activity for cycloaddition of CO2 to epoxides with good yields (up to 99 %), good substrate compatibility (11 examples) and reusability (four catalytic cycles) under mild condition.

Hierarchical Amino-Functionalized Ionic Liquids@MOF Composite Gel for Catalytic Conversion of CO2

Hybridization of metal-organic frameworks (MOFs) and homogeneous ionic liquids (ILs) endows the heterogeneous composite with high porosity and accessible multiple active sites (e.g., acidic or basic sites), which exhibits great potential in CO2 capture and conversion. Nevertheless, the majority of MOF composites are synthesized as powders, significantly restricting their practical applications due to inherent problems such as poor handling properties, high pressure drops, and mechanical instability. Thus, it is crucial to shape MOF composites into various monoliths that allow efficient processing, especially for industrial purposes. In this work, a hierarchical ILs@nanoMOF composite gel (H-IL@UiO-66-gel) featuring both intraparticle micropores and interparticle mesopores and multiple active sites was successfully fabricated by a two-step approach. Benefiting from the integrated advantages of the hierarchically porous MOF for enhanced mass transfer and affinity of ILs for activating CO2 molecules, the resultant H-IL@UiO-66-gel exhibits excellent uptake of macromolecules and catalytic activity toward CO2 cycloaddition with epoxides under moderate conditions, far beyond the traditional microporous IL@UiO-66-gel and unfunctionalized H-UiO-66-gel. Furthermore, the H-IL@UiO-66 composite monolith can be effortlessly separated and reused at least three times without depletion of catalytic activity. It is believed that this fabrication method for the shaping of MOF composites is highly versatile and can be extended to other types of MOFs for various application fields.

Amine-rich Nickel(II)-Xerogel as a Highly Active Bifunctional Metallo-organo Catalyst for Aqueous Knoevenagel Condensation and Solvent-free CO2 Cycloaddition

Metallogels formed from supramolecular interactions of low-molecular-weight gelators (LMWGs) combine the qualities of heterogeneous catalysts and offer the advantages of multifunctionality owing to the facile installation of desired task-specific moieties on the surface and along the channels of the gels. We discuss the applications of a triazole-based Ni(II) gel-derived xerogel (NiXero) having a high density of Ni(II)-nodes and appended primary amines as a recyclable heterogeneous catalyst for Knoevenagel condensation of aldehyde and malononitrile in water and the solvent-free cycloaddition of CO2 to form a series of cyclic carbonates with near-quantitative conversion of the respective epoxides, with low catalyst loading (0.59 mol %), high catalyst stability, and recyclability. The structural advantages of NiXero, due to the concurrent presence of bifunctional Lewis acid-base sites on the channels, open Ni(II) nodes, Ntriazole, pendant -NH2 and its chemical stability, are conducive to the cooperative heterogeneous catalytic activity under mild conditions. This work emphasizes the effective amalgamation of metals with purpose-built ligand systems for the construction of metallogels and their utility as heterogeneous catalysts for desired organic transformations.

Mesoporous MOF Based on a Hexagonal Bipyramid Co8-Cluster: High Catalytic Efficiency on the Cycloaddition Reaction of CO2 with Bulky Epoxides

A mesoporous cobalt-based metal-organic framework (LCU-606) was synthesized based on a hexagonal bipyramid Co8(μ4-O)3 cluster and an N,N,N',N'-tetrakis-(4-benzoic acid)-1,4-phenylenediamine ligand (H4TBAP). LCU-606 featuring large pore diameters of 21.7 Å and exposed Lewis-acid metal sites could serve as an excellent heterogeneous catalyst for CO2 cycloaddition reaction with various epoxide substrates under mild conditions (1 atm CO2, 60 °C, and solvent free). In particular, when extending the substrates to bulkier ones, LCU-606 still shows high catalytic efficiency on account of the large pore aperture. Also, LCU-606 demonstrates high recyclability and stability in consecutive catalytic runs. Therefore, the high efficiency, recyclability, and generality on CO2 catalytic cycloaddition make LCU-606 a very promising heterogeneous catalyst for CO2 chemical fixation.

SU-101: a Bi(III)-based metal-organic framework as an efficient heterogeneous catalyst for the CO2 cycloaddition reaction

A non-porous version of SU-101 (herein n-SU-101) was evaluated for the CO2 cycloaddition reaction. The findings revealed that open metal sites (Bi3+) are necessary for the reaction. n-SU-101 displays a high styrene oxide conversion of 96.6% under mild conditions (3 bar and 80 °C). The catalytic activity of n-SU-101 demonstrated its potential application for the cycloaddition of CO2 using styrene oxide.

Fixing CO2 under Atmospheric Conditions and Dual Functional Heterogeneous Catalysis Employing Cu MOFs: Polymorphism, Single-Crystal-to-Single-Crystal (SCSC) Transformation and Magnetic Studies

New copper compounds, [Cu(C14H8O6)(C10H8N2)(H2O)] (1), [Cu(C14H8O6)(C10H8N2)(H2O)]·(C3H7ON)2 (2), [Cu(C14H8O6)(C10H8N2)(H2O)2]·(C3H7ON) (3), [Cu(C14H8O6)(C10H8N4)] (4), and [Cu(C14H8O6)(C10H8N4)]·(H2O) (5), were prepared employing 2,5-bis(prop-2-yn-1-yloxy)terephthalic acid (2,5-BPTA) as the primary ligand and 4,4'-bipyridine (1-3) and 4,4'-azopyridine (4-5) as the secondary ligands. Single-crystal studies indicated that compounds 1-4 have two-dimensional layer structures and compound 5 has a three-dimensional structure. Compounds 1-3 were isolated from the same reaction mixture but by varying the time of reaction. The framework structures of compounds 1-3 are similar and may be considered as polymorphic structures. Compounds 4 and 5 can also be considered polymorphic with a change in dimensionality of the structure. Compounds 1-3 can be formed through a single-crystal-to-single-crystal transformation under a suitable solvent mixture. The Cu center was explored for the Lewis acid-catalyzed cycloaddition reaction of epoxide and CO2 under ambient conditions in a solventless condition and also for the synthesis of propargylamine derivatives by three-component coupling reactions (A3 coupling) in a DCM medium. The Lewis basic functionality of the MOF (-N═N- group) has been explored for the Henry reaction (aldol condensation) in a solventless condition. In all of the catalytic reactions, good yields and recyclability were observed. The magnetic studies indicated that compounds 1 and 4 have antiferromagnetic interactions and compound 5 has ferromagnetic interactions. The present studies illustrated the rich diversity that the copper-containing compounds exhibit in extended framework structures.

MOF-based catalysts: insights into the chemical transformation of greenhouse and toxic gases

Metal-organic framework (MOF)-based catalysts are outstanding alternative materials for the chemical transformation of greenhouse and toxic gases into high-add-value products. MOF catalysts exhibit remarkable properties to host different active sites. The combination of catalytic properties of MOFs is mentioned in order to understand their application. Furthermore, the main catalytic reactions, which involve the chemical transformation of CH4, CO2, NOx, fluorinated gases, O3, CO, VOCs, and H2S, are highlighted. The main active centers and reaction conditions for these reactions are presented and discussed to understand the reaction mechanisms. Interestingly, implementing MOF materials as catalysts for toxic gas-phase reactions is a great opportunity to provide new alternatives to enhance the air quality of our planet.

Thermocatalytic Conversion of CO2 to Valuable Products Activated by Noble-Metal-Free Metal-Organic Frameworks

Thermocatalysis of CO2 into high valuable products is an efficient and green method for mitigating global warming and other environmental problems, of which Noble-metal-free metal-organic frameworks (MOFs) are one of the most promising heterogeneous catalysts for CO2 thermocatalysis, and many excellent researches have been published. Hence, this review focuses on the valuable products obtained from various CO2 conversion reactions catalyzed by noble-metal-free MOFs, such as cyclic carbonates, oxazolidinones, carboxylic acids, N-phenylformamide, methanol, ethanol, and methane. We classified these published references according to the types of products, and analyzed the methods for improving the catalytic efficiency of MOFs in CO2 reaction. The advantages of using noble-metal-free MOF catalysts for CO2 conversion were also discussed along the text. This review concludes with future perspectives on the challenges to be addressed and potential research directions. We believe that this review will be helpful to readers and attract more scientists to join the topic of CO2 conversion.

Fe(III)-Anchored Porphyrin-Based Nanoporous Covalent Organic Frameworks for Green Synthesis of Cyclic Carbonates from Olefins and CO2 under Atmospheric Pressure Conditions

The utilization of carbon dioxide (CO2) as a C1 source coupled with olefins, readily accessible feedstocks, offers dual advantages of mitigating atmospheric carbon dioxide and green synthesis of valuable chemicals. In this regard, herein we demonstrate the application of Fe(III)-anchored porphyrin-based covalent organic framework (P-COF) as a promising recyclable catalyst for one-step generation of cyclic carbonates (CCs), value-added commodity chemicals from olefins and CO2, under mild atmospheric pressure conditions. Moreover, this one-pot synthesis was applied to transform various olefins (aliphatic and aromatic) into the corresponding CCs in good yield and selectivity. In addition, the Fe(III)@P-COF showed good recyclability and durability for multiple reuse cycles without losing its catalytic activity. Notably, this one-step synthesis strategy presents an eco-friendly, atom-economic alternative to the conventional two-step process requiring epoxides. This work represents a rare demonstration of porphyrin COF-catalyzed one-pot CC synthesis by utilizing readily available olefins at atmospheric pressure of carbon dioxide.

Co@Co Cages Engineered from Hollowing MOFs for Enhanced Hydrogen Evolution Reaction Performance

Advances in hollow engineering of metal-organic frameworks (MOFs) have enabled a variety of applications in catalysts, sensors, and batteries, but the hollow derivatives are often limited to hydroxides, oxides, selenides, and sulfides with the presence of additional elements from the environment. Here we have successfully synthesized hollow metallic Co@Co cages through a facile two-step strategy. Interestingly, the Co@Co(C) cages with a small amount of residual carbon show excellent catalytic performance due to the abundant exposed active sites and fast charge transfer. During the hydrogen evolution reaction, the overpotential of Co@Co(C) is as low as ∼54 mV at the current density of 10 mA cm^-2, which is close to that of ∼38 mV for the Pt/C electrodes. The two-step synthesis strategy opens up opportunities for increasing the number of catalytic active sites and rates of charge/mass transfer while pushing the limits of materials utilization beyond that achieved in existing MOF-based nanostructures.

Sequential Assembly and Stabilization of Cu6S6 Octahedral Clusters in NaCl-, NiAs-, and CdI2-Related Structures and Their Utility toward Thermochromism and Multicomponent Hantzsch Reaction

Seven new inorganic-organic coordination polymer compounds have been synthesized and their structures are determined by single-crystal structure determination. The compounds were prepared by the sequential assembly of a [Cu₆(mna)₆]^6- moiety in the presence of a Mn salt and a secondary amine ligand. Of the seven compounds, [{Cu₆(mna)₆}Mn₃(H₂O)(H₂O)_1.5]·5.5H₂O (I), [{Cu₆(mna)₆}Mn₃(H₂O)(Im)_1.5]·3.5H₂O (Ia), [{Cu₆(mna)₆}{Mn(BPY)(H₂O)}₂{Mn(H₂O)₄}]·2H₂O (III), and [{Cu₆(mna)₆}{Mn(BPE)_0.5(H₂O)₂}₂{Mn(BPE)(H₂O)₂}] (IV) have a three-dimensional structure, whereas [{Cu₆(mna)_4.5(Hmna)_1.5}{Mn(BPA)(H₂O)₂}{Mn(H₂O)}]{Mn_0.25(H₂O)₃}·7H₂O (II), [{Cu₆(mna)₆}{Mn(4-BPDB)_0.5H₂O}{Mn(H₂O)₂}].{Mn(H₂O)₆}·6H₂O (V), and [{Cu₆(mna)₄(Hmna)₂}·{Mn(H₂O)₃}₂]·(4-APY)₂·6H₂O (VI) have a two-dimensional structure. Some of the prepared compounds exhibit structures that closely resemble the classical inorganic structures, such as NaCl (Ia, III), NiAs (I), and CdI₂ (IV and VI). The stabilization of such simple structures from the assembly of octahedral Cu₆S₆ clusters and different Mn species and aromatic nitrogen-containing ligands suggests the subtle interplay between the constituent reactants. The compounds were examined for the multicomponent Hantzsch reaction, which gave the product in good yields. The compounds, II and VI, on heating to 70 °C change color reversibly from pale yellow to deep red, which suggests the possible use of these compounds as thermochromic materials. The present study suggests that the Cu₆S₆ octahedral clusters can be assembled into structures that resemble classical inorganic structures.

Synergistic Effects of Lewis Acid-Base Pair Sites─Hf-MOFs with Functional Groups as Distinguished Catalysts for the Cycloaddition of Epoxides with CO2

The incorporation of Lewis acid-base sites in catalysts has been considered as a significant approach to fabricating bifunctional catalysts with efficient catalytic activity for CO₂ fixation. In this paper, a series of Hafnium-based metal-organic frameworks (Hf-MOFs), NU-912(Hf) and NU-912-X(Hf)-X (X = -NH₂, -Br, -CN, and -I) derivatives assembled by Lewis acidic Hf₆(μ₃-O)₄(μ₃-OH)₄(H₂O)₄(OH)₄ (Hf₆) clusters and Lewis base-attached organic linkers, are successfully synthesized by a facile ligand functionalization method. These isostructural Hf-MOFs, which exhibit diamond channels of 1.3 nm diameter, great chemical stability, and CO₂ adsorption capacity, have been evaluated as catalysts for the CO₂ cycloaddition reaction with epoxides. Catalytic experiments reveal that the micropore environments of these MOFs have an outstanding impact on catalytic activity. Remarkably, NU-912(Hf)-I serves as an efficient heterogeneous catalyst for this catalytic reaction under mild conditions due to the high density of Lewis acid Hf₆ cluster centers and strong Lewis base functional groups, surpassing most of the reported MOF-based catalysts.

Zr- and Ti-based metal-organic frameworks: synthesis, structures and catalytic applications

Recently, Zr- and Ti-based metal-organic frameworks (MOFs) have gathered increasing interest in the field of chemistry and materials science, not only for their ordered porous structure, large surface area, and high thermal and chemical stability, but also for their various potential applications. Particularly, the unique features of Zr- and Ti-based MOFs enable them to be a highly versatile platform for catalysis. Although much effort has been devoted to developing Zr- and Ti-based MOF materials, they still suffer from difficulties in targeted synthesis, especially for Ti-based MOFs. In this Feature Article, we discuss the evolution of Zr- and Ti-based MOFs, giving a brief overview of their synthesis and structures. Furthermore, the catalytic uses of Zr- and Ti-based MOF materials in the previous 3-5 years have been highlighted. Finally, perspectives on the Zr- and Ti-based MOF materials are also proposed. This work provides in-depth insight into the advances in Zr- and Ti-based MOFs and boosts their catalytic applications.

Integrated carbon capture and conversion: A review on C2+ product mechanisms and mechanism-guided strategies

The need to reduce atmospheric CO₂ concentrations necessitates CO₂ capture technologies for conversion into stable products or long-term storage. A single pot solution that simultaneously captures and converts CO₂ could minimize additional costs and energy demands associated with CO₂ transport, compression, and transient storage. While a variety of reduction products exist, currently, only conversion to C₂₊ products including ethanol and ethylene are economically advantageous. Cu-based catalysts have the best-known performance for CO₂ electroreduction to C₂₊ products. Metal Organic Frameworks (MOFs) are touted for their carbon capture capacity. Thus, integrated Cu-based MOFs could be an ideal candidate for the one-pot capture and conversion. In this paper, we review Cu-based MOFs and MOF derivatives that have been used to synthesize C₂₊ products with the objective of understanding the mechanisms that enable synergistic capture and conversion. Furthermore, we discuss strategies based on the mechanistic insights that can be used to further enhance production. Finally, we discuss some of the challenges hindering widespread use of Cu-based MOFs and MOF derivatives along with possible solutions to overcome the challenges.

Strong Electronic Metal-Support Interaction between Iridium Single Atoms and a WO3 Support Promotes Highly Efficient and Robust CO2 Cycloaddition

The carbon dioxide (CO₂ ) cycloaddition of epoxides to cyclic carbonates is of great industrial importance owing to the high economical values of its products. Single-atom catalysts (SACs) have great potential in CO₂ cycloaddition by virtue of their high atom utilization efficiency and desired activity, but they generally suffer from poor reaction stability and catalytic activity arising from the weak interaction between the active centers and the supports. In this work, Ir single atoms stably anchored on the WO₃ support (Ir₁ -WO₃ ) are developed with a strong electronic metal-support interaction (EMSI). Superior CO₂ cycloaddition is realized in the Ir₁ -WO₃ catalyst via the EMSI effect: 100% conversion efficiency for the CO₂ cycloaddition of styrene oxide to styrene carbonate after 15 h at 40 °C and excellent stability with no degradation even after ten reaction cycles for a total of more than 150 h. Density functional theory calculations reveal that the EMSI effect results in significant charge redistribution between the Ir single atoms and the WO₃ support, and consequently lowers the energy barrier associated with epoxide ring opening. This work furnishes new insights into the catalytic mechanism of CO₂ cycloaddition and would guide the design of stable SACs for efficient CO₂ cycloaddition reactions.

Hexaphenylbenzene-Based Deep Blue-Emissive Metallacages as Donors for Light-Harvesting Systems

We herein report the preparation of a series of hexaphenylbenzene (HPB)-based deep blue-emissive metallacages via multicomponent coordination-driven self-assembly. These metallacages feature prismatic structures with HPB derivatives as the faces and tetracarboxylic ligands as the pillars, as evidenced by NMR, mass spectrometry and X-ray diffraction analysis. Light-harvesting systems were further constructed by employing the metallacages as the donor and a naphthalimide derivative (NAP) as the acceptor, owing to their good spectral overlap. The judiciously chosen metallacage serves as the antenna, providing the suitable energy to excite the non-emissive NAP, and thus resulting in bright emission for NAP in the solid state. This study provides a type of HPB-based multicomponent emissive metallacage and explores their applications as energy donors to light up non-emissive fluorophores in the solid state, which will advance the development of emissive metallacages as useful luminescent materials.

Novel magnetic iron-nickel/poly(ethersulfone) mixed matrix membranes for oxygen separation potential without applying an external magnetic field

This work presents novel magnetic mixed matrix poly(ethersulfone) (PES) membranes that combine the advantages of low-cost common PES polymer and low-cost iron–nickel magnetic alloys. Moreover, the presented magnetic mixed matrix PES membranes were fabricated and used without applying an external magnetic field during either the membrane casting or the separating process. The fabricated magnetic membranes were prepared using the phase inversion technique and N-methylpyrrolidone and N,N‐Dimethylformamide solvents mixture with volumetric ratio 1:9 and Lithium chloride as an additive. The used iron–nickel magnetic alloys were prepared by a simple chemical reduction method with unique morphologies (Fe₁₀Ni₉₀; starfish-like and Fe₂₀Ni₈₀; necklace-like). The fabricated membranes were characterized using Scanning Electron Microscope (SEM) and Scanning-Transmission Electron Microscope (STEM) imaging, energy dispersive X-ray (EDX), Thermogravimetric (TGA), and X-ray diffraction (XRD). Also, static water contact angle, membrane thickness, surface roughness, membrane porosity, membrane tensile strength as well as Vibrating Sample Magnetometer (VSM) analysis and oxygen transition rate (OTR) were determined. Moreover, the effect of alloy concentration and using Lithium chloride as an additive on the properties of the fabricated blank PES and magnetic mixed matrix PES membranes were studied. The presented novel magnetic mixed matrix PES membranes have high coercivity up to 106 (emu/g) with 3.61 × 10^–5 cm³/cm²·s OTR compared to non-oxygen permeable blank PES membranes. The presented novel magnetic mixed matrix PES membranes have good potential in (oxygen) gas separation.

Recent progress on covalent organic framework materials as CO2 reduction electrocatalysts

CO2 emission caused by fuel combustion and human activity has caused severe climate change and other subsequent pollutions around the world. Carbon neutralization via various novel technologies to alleviate the CO2 level in the atmosphere has thus become one of the major topics in modern research field. These advanced technologies cover CO2 capture, storage and conversion, etc., and electrocatalytic CO2 reduction reaction (CO2RR) by heterogeneous catalysts is among the most promising methods since it could utilize renewable energy and generate valuable fuels and chemicals. Covalent organic frameworks (COFs) represent crystalline organic polymers with highly rigid, conjugated structures and tunable porosity, which exhibit significant potential as heterogeneous electrocatalysts for CO2RR. This review briefly introduces related pioneering works in COF-based materials for electrocatalytic CO2RR in recent years and provides a basis for future design and synthesis of highly active and selective COF-based electrocatalysts in this direction.

Chiral Lanthanum Metal-Organic Framework with Gated CO2 Sorption and Concerted Framework Flexibility

A metal–organic framework (MOF) CTH-17 based on lanthanum(III) and the conformationally chiral linker 1,2,3,4,5,6-hexakis(4-carboxyphenyl)benzene, cpb^6–: [La₂(cpb)]·1.5dmf was prepared by the solvothermal method in dimethylformamide (dmf) and characterized by variable-temperature X-ray powder diffraction (VTPXRD), variable-temperature X-ray single-crystal diffraction (SCXRD), and thermogravimetric analysis (TGA). CTH-17 is a rod-MOF with new topology och. It has high-temperature stability with Sohncke space groups P6₁22/P6₅22 at 90 K and P622 at 300 and 500 K, all phases characterized with SCXRD and at 293 K also with three-dimensional (3D) electron diffraction. VTPXRD indicates a third phase appearing after 620 K and stable up to 770 K. Gas sorption isotherms with N₂ indicate a modest surface area of 231 m² g^–1 for CTH-17, roughly in agreement with the crystal structure. Carbon dioxide sorption reveals a gate-opening effect of CTH-17 where the structure opens up when the loading of CO₂ reaches approximately ∼0.45 mmol g^–1 or 1 molecule per unit cell. Based on the SCXRD data, this is interpreted as flexibility based on the concerted movements of the propeller-like hexatopic cpb linkers, the movement intramolecularly transmitted by the π–π stacking of the cpb linkers and helped by the fluidity of the LaO₆ coordination sphere. This was corroborated by density functional theory (DFT) calculations yielding the chiral phase (P622) as the energy minimum and a completely racemic phase (P6/mmm), with symmetric cpb linkers representing a saddle point in a racemization process.

Acid/base responsive assembly/dis-assembly of a family of zirconium(IV) clusters with a cyclic imide-dioxime ligand

The hydrolytically stable dioxime ligand (2Z-6Z)-piperidine-2,6-dione (H₃pidiox) acts as a strong chelator mainly with hard metals in high oxidation states, a pre-requisite for potential applications in metal sequestering processes from aqueous solutions. Reaction of ZrCl₄ with H₃pidiox in methanol gives the mononuclear compound [Zr^IV(η¹,η¹,η²-H₂pidiox-O,N,O')₂(OH₂)₂]Cl₂·H₂O·CH₃OH (1), while the same reaction mixture in the presence of KOH gave the pentanuclear ZrOC [ZrIV5(μ₂-OH)₄(OH₂)₄(μ₂-η¹,η¹,η²-Hpidiox-O,N,O')₄(η¹,η¹,η¹-HpidioxO,N,O')₄]·5KCl·3CH₃OH·8H₂O (2). Compound 1 is formed at very acidic pH = 0, and the pentanuclear ZrOC 2 at higher pH values (pH = 2). Compounds 1 and 2 were characterized by single crystal X-ray structure analysis, multi-nuclear NMR spectroscopy and ESI-MS spectrometry. The single crystal X-ray structure analysis of 1 revealed a mononuclear zirconium(IV) compound containing an eight-coordinate zirconium atom bound to two singly deprotonated H₂pidiox^- ligands and two water molecules in a severely distorted bicapped octahedral geometry. The pentanuclear ZrOC 2 constitutes the second example of a Zr₅ cluster to be reported and the first one in which the four zirconium atoms are arranged in a tetrahedral arrangement with the fifth occupying the center of the tetrahedron. 1D and 2D NMR spectroscopies of the acidic CD₃OD solutions of complex 1 reveal a fast equilibrium between 1 and 2. Addition of KOH into a CH₃OH solution of 2 results in the controlled fast transformation of 2 to an asymmetric hexanuclear ZrOC 3 as evidenced by the NMR and real-time ESI-MS solution studies. Further addition of KOH to the solution of 3 leads to the ZrOC 4, and on the basis of NMR and ESI-MS data and in comparison with the known hexanuclear titanium(IV)/H₃pidiox cluster, it is concluded that the cluster 4 should have a hexanuclear structure. Electrospray ionization mass spectrometry (ESI-MS) demonstrated not only the structural stability 1 and 2 in solution, but also revealed the reversible pH driven dis-assembly/re-assembly process between the monomeric 1 and the pentanuclear ZrOC 2.

Novel hydroxyl-functionalized ionic liquids as efficient catalysts for the conversion of CO2 into cyclic carbonates under metal/halogen/cocatalyst/solvent-free conditions

Environmentally friendly synthesis route to carbonates from CO2 and epoxides catalysed by novel hydroxyl-functionalized ionic liquids under metal/halogen/cocatalyst/solvent-free conditions.

Study on Selected Metal-Organic Framework-Based Catalysts for Cycloaddition Reaction of CO2 with Epoxides: A Highly Economic Solution for Carbon Capture and Utilization

The level of carbon dioxide in the atmosphere is growing rapidly due to fossil fuel combustion processes, heavy oil, coal, oil shelter, and exhausts from automobiles for energy generation, which lead to depletion of the ozone layer and consequently result in global warming. The realization of a carbon-neutral environment is the main focus of science and academic researchers of today. Several processes were employed to minimize carbon dioxide in the air, some of which include the utilization of non-fossil sources of energy like solar, nuclear, and biomass-based fuels. Consequently, these sources were reported to have a relatively high cost of production and maintenance. The applications of both homogeneous and heterogeneous processes in carbon capture and storage were investigated in recent years and the focus now is on the conversion of CO2 into useful chemicals and compounds. It was established that CO2 can undergo cycloaddition reaction with epoxides under the influence of special catalysts to give cyclic carbonates, which can be used as value-added chemicals at a different level of pharmaceutical and industrial applications. Among the various catalysts studied for this reaction, metal-organic frameworks are now on the frontline as a potential catalyst due to their special features and easy synthesis. Several metal-organic framework (MOF)-based catalysts were studied for their application in transforming CO2 to organic carbonates using epoxides. Here, we report some recent studies of porous MOF materials and an in-depth discussion of two repeatedly used metal-organic frameworks as a catalyst in the conversion of CO2 to organic carbonates.