Orthorhombic NiSe2 Nanocrystals on Si Nanowires for Efficient Photoelectrochemical Water Splitting

Spongelike Bimetallic Selenides Derived from Prussian Blue Analogue on Layered Ni(II)-Based MOF for High-Efficiency Supercapacitors

Recently, employing metal-organic frameworks (MOFs) as precursors to prepare various metal oxides, sulfides, and selenides has drawn enormous attention in the field of energy storage. In this paper, the nanosheets of an organophosphate-based Ni-MOF were successfully synthesized and employed as the template to prepare the Prussian blue analogue (PBA) nanoslices and nanoparticles on the nanosheet (PBA/Ni-MOF-NS-x h, x h stands for the reaction time.) by an in situ etching method. After selenization by the solvothermal method, the PBA nanoslices and nanoparticles were transformed into spongelike bimetallic selenides (labeled as PBA/Ni-MOF-NS-x h-Se) decorated with some nanoparticles. All of the characterization results including PXRD, SEM, TEM, EDS, XPS, and BET demonstrated the successful transformation. Impressively, the as-synthesized PBA/Ni-MOF-NS-12 h-Se exhibited a high specific capacitance of 1897.90 F g-1 at a current density of 1 A g-1 and a superior capacitance retention rate of 73.32% as the current density increased to 20 A g-1. In addition, the asymmetric supercapacitor device, PBA/Ni-MOF-NS-12 h-Se//AC, delivered a high energy density of 30.69 W h kg-1 at 0.85 kW kg-1 and extraordinary cycling stability with an 83.00% capacitance retention rate over 5000 cycles.

Photoelectrochemical Performance of a CuBi2O4 Photocathode with H2O2 as a Scavenger

Photoelectrochemical (PEC) water splitting is an eco-friendly method for producing clean and sustainable hydrogen fuels. Compared with the fabrication of solar hydrogen using n-type metal oxide semiconductor photoanodes, that of solar hydrogen using p-type metal oxide semiconductor photocathodes has not been researched as thoroughly. Therefore, this study investigated the effect of drop casting time on the PEC performance of a prepared CuBi2O4 photocathode. XPS, HRTEM, UV-DRS, Raman spectroscopy, XRD, and SEM analyses were used to characterize the prepared CuBi2O4 photocathode. Owing to the high charge separation and transfer, the photocurrent density of the CuBi2O4 photocathode was ~0.6 mA cm−2 at 0.3 V vs. RHE. The nanoporous CuBi2O4 photocathode exhibited a high photocurrent density of up to 1.2 mA cm−2 at 0.3 V vs. RHE with H2O2 as a sacrificial agent. Mott–Schottky and impedance measurements were also performed on the CuBi2O4 photocathode to estimate its acceptor density and charge-transfer resistance.

Gold-Promoted Electrodeposition of Metal Sulfides on Silicon Nanowire Photocathodes To Enhance Solar-Driven Hydrogen Evolution

Constructing composite structures is the key to breaking the dilemma of slow reaction kinetics and easy oxidation on the surface of lightly doped p-type silicon nanowire (SiNW) array photocathodes. Electrodeposition is a convenient and fast technique to prepare composite photocathodes. However, the low conductivity of SiNWs limits the application of the electrodeposition technique in constructing composite structures. Herein, SiNWs were loaded with Au nanoparticles by chemical deposition to decrease the interfacial charge transfer resistance and increase active sites for the electrodeposition. Subsequently, co-catalysts CoS, MoS₂, and Ni₃S₂ with excellent hydrogen evolution activity were successfully composited by electrodeposition on the surface of SiNWs/Au. The obtained core-shell structures exhibited excellent photoelectrochemical hydrogen evolution activity, which was contributed by the plasma property of Au and the abundant hydrogen evolution active sites of the co-catalysts. This work provided a simple and efficient solution for the preparation of lightly doped SiNW-based composite structures by electrodeposition.

Advances in silicon nanowire applications in energy generation, storage, sensing, and electronics: a review

Nanowire-based technological advancements thrive in various fields, including energy generation and storage, sensors, and electronics. Among the identified nanowires, silicon nanowires (SiNWs) attract much attention as they possess unique features, including high surface-to-volume ratio, high electron mobility, bio-compatibility, anti-reflection, and elasticity. They were tested in domains of energy generation (thermoelectric, photo-voltaic, photoelectrochemical), storage (lithium-ion battery (LIB) anodes, super capacitors), and sensing (bio-molecules, gas, light, etc). These nano-structures were found to improve the performance of the system in terms of efficiency, stability, sensitivity, selectivity, cost, rapidity, and reliability. This review article scans and summarizes the significant developments that occurred in the last decade concerning the application of SiNWs in the fields of thermoelectric, photovoltaic, and photoelectrochemical power generation, storage of energy using LIB anodes, biosensing, and disease diagnostics, gas and pH sensing, photodetection, physical sensing, and electronics. The functionalization of SiNWs with various nanomaterials and the formation of heterostructures for achieving improved characteristics are discussed. This article will be helpful to researchers in the field of nanotechnology about various possible applications and improvements that can be realized using SiNW.

Nanowire photochemical diodes for artificial photosynthesis

Artificial photosynthesis can provide a solution to our current energy needs by converting small molecules such as water or carbon dioxide into useful fuels. This can be accomplished using photochemical diodes, which interface two complementary light absorbers with suitable electrocatalysts. Nanowire semiconductors provide unique advantages in terms of light absorption and catalytic activity, yet great control is required to integrate them for overall fuel production. In this review, we journey across the progress in nanowire photoelectrochemistry (PEC) over the past two decades, revealing design principles to build these nanowire photochemical diodes. To this end, we discuss the latest progress in terms of nanowire photoelectrodes, focusing on the interplay between performance, photovoltage, electronic band structure, and catalysis. Emphasis is placed on the overall system integration and semiconductor-catalyst interface, which applies to inorganic, organic, or biologic catalysts. Last, we highlight further directions that may improve the scope of nanowire PEC systems.

Type-II CuFe2O4/Graphitic Carbon Nitride Heterojunctions for High-Efficiency Photocatalytic and Electrocatalytic Hydrogen Generation

Solar water splitting has emerged as an urgent imperative as hydrogen emerges as an increasingly important form of energy storage. g-C₃N₄ is an ideal candidate for photocatalytic water splitting as a result of the excellent alignment of its band edges with water redox potentials. To mitigate electron-hole recombination that has limited the performance of g-C₃N₄, we have developed a semiconductor heterostructure of g-C₃N₄ with CuFe₂O₄ nanoparticles (NPs) as a highly efficient photocatalyst. Visible-light-driven photocatalytic properties of CuFe₂O₄/g-C₃N₄ heterostructures with different CuFe₂O₄ loadings have been examined with two sacrificial agents. An up to 2.5-fold enhancement in catalytic efficiency is observed for CuFe₂O₄/g-C₃N₄ heterostructures over g-C₃N₄ nanosheets alone with the apparent quantum yield of H₂ production approaching 25%. The improved photocatalytic activity of the heterostructures suggests that introducing CuFe₂O₄ NPs provides more active sites and reduces electron-hole recombination. The g-C₃N₄/CuFe₂O₄ heterostructures furthermore show enhanced electrocatalytic HER activity as compared to the individual components as a result of which by making heterostructures g-C₃N₄ with CuFe₂O₄ increased the active catalytic surface for the electrocatalytic water splitting reaction. The enhanced faradaic efficiency of the prepared heterostructures makes it a potential candidate for efficient hydrogen generation. Nevertheless, the designed heterostructure materials exhibited significant photo- and electrocatalytic activity toward the HER, which demonstrates a method for methodically enhancing catalytic performance by creating heterostructures with the best energetic offsets.

Heterometal doping on nickel selenide corrugations for solar-assisted electrocatalytic hydrogen evolution

Since nickel exhibits good binding energy and is inexpensive, it is widely applied as a hydrogen evolution reaction (HER) electrocatalyst. Among all Ni-based materials, nickel selenide (NiSe) shows a unique electronic structure as a semiconductor with good electrocatalytic activity. Herein, we prepare Co-doped NiSe (Ni_1-xCo_xSe) with a structure of uniform corrugations by one-step chemical vapor deposition. For comparison, Fe-doped NiSe (Ni_1-xFe_xSe) and NiSe are also prepared using the same method. In alkaline electrolyte, Ni_1-xCo_xSe shows great HER performance in terms of low overpotential (93 mV@10 mA cm^-2 and 140 mV@50 mA cm^-2) and long-term stability. Moreover, with the assistance of solar energy, the overpotential needed for Ni_1-xCo_xSe is reduced, making Ni_1-xCo_xSe better than most reported NiSe-based HER catalysts. On the other hand, the current density of Ni_1-xCo_xSe is 13 mA cm^-2@93 mV and 63 mA cm^-2@140 mV with illumination, which is 30% and 26% higher than that without solar illumination assistance, respectively. Therefore, we believe that inducing sunlight to electrocatalytic hydrogen evolution in water splitting could be a supplementary footprint toward the utilization of solar energy.

In-situ construction of heterostructure (Ni, Co)Se2 nanoarrays derived from cone-like ZIF-L for high-performance hybrid supercapacitors

The construction of heterostructure could enhance the electron transfer efficiency and increase the number of active sites, which can further develop high-performance electrode materials of supercapacitors. Herein, (Ni, Co)Se₂ nanorod arrays were prepared based on the NiCo-LDH derived from a conical ZIF-L. Significantly, the single nanorod is composed of interconnected NiSe₂ and CoSe₂ nanoparticles, the heterostructure can expose higher conductivity, more sufficient redox reaction active sites and larger specific surface area. The as-obtained CF@(Ni, Co)Se₂ achieved a high specific capacity of 188.8 mAh g^-1 at the current density of 1.0 A g^-1 and an outstanding cycling stability with a high capacity retention of 90% after 8000 cycles. Finally, an hybrid supercapacitor device composed of activated carbon (AC) as negative electrode and CF@(Ni, Co)Se₂ as positive electrode was designed, which revealed an ideal voltage window of 0-1.6 V and exhibited a great energy density of 36.02 Wh kg^-1 at the power density of 800 W kg^-1, such surpassing energy storage characteristics evidently testify that (Ni, Co)Se₂ nanorod arrays can be as the potential electrode material to promote the development of high-performance supercapacitors.

Improved hydrogen evolution with SnS2 quantum dot-incorporated black Si photocathode

Black silicon (bSi), possessing appealing light-trapping properties and large specific surface area, ranks high among many other photocathode materials. However, the insufficient dynamics towards HER seriously bother black Si. Herein, a novel photoelectrode with ultrasmall size tin sulfide quantum dot (SnS₂ QD) incorporated black silicon was employed. Nanosized SnS₂ possesses numerous active sites for electrochemical reactions. Impressively, benefiting from SnS₂ QDs, the downward band bending of the Si Fermi level at the interface of electrolyte becomes higher, which remarkably suppresses the recombination of photo-generated carriers, thereby facilitating the participation of photo-generated electrons in PEC-HER. As a result, the thus-designed SnS₂/bSi reveals an exceptional PEC-HER activity with a positive onset potential of 0.235 V vs. reversible hydrogen electrode (RHE), a high photocurrent of 1.23 mA cm^-2 at 0 V vs. RHE, and long-term stability. Besides, the saturated photocurrent of ∼41 mA cm^-2 is achieved at about -0.51 V vs. RHE.

Challenges and prospects about the graphene role in the design of photoelectrodes for sunlight-driven water splitting

Graphene and its derivatives have emerged as potential materials for several technological applications including sunlight-driven water splitting reactions. This review critically addresses the latest achievements concerning the use of graphene as a player in the design of hybrid-photoelectrodes for photoelectrochemical cells. Insights about the charge carrier dynamics of graphene-based photocatalysts which include metal oxides and non-metal oxide semiconductors are also discussed. The concepts underpinning the continued progress in the field of graphene/photoelectrodes, including different graphene structures, architecture as well as the possible mechanisms for hydrogen and oxygen reactions are also presented. Despite several reports having demonstrated the potential of graphene-based photocatalysts, the achieved performance remains far from the targeted benchmark efficiency for commercial application. This review also highlights the challenges and opportunities related to graphene application in photoelectrochemical cells for future directions in the field.

Probing the stoichiometry dependent catalytic activity of nickel selenide counter electrodes in the redox reaction of iodide/triiodide electrolyte in dye sensitized solar cells

Nickel selenide (Ni _x Se _y ) systems have received much attention in recent years as potential low cost counter electrodes (CEs) in dye sensitized solar cells (DSSCs). Their electrocatalytic activities are comparable to that of the conventional platinum CE. Despite their achievements, the effect of stoichiometry on their catalytic performance as CEs in DSSCs still remains unclear, hence the motivation for this work. Different stoichiometries of Ni _x Se _y were synthesized via a colloidal method in oleylamine or oleylamine/oleic acid mixture at the appropriate synthetic temperature and Ni to Se precursor ratio. X-ray diffraction revealed that different stoichiometries of nickel selenide were formed namely, NiSe₂, Ni₃Se₄, Ni_0.85Se, NiSe and Ni₃Se₂. Scanning electron microscopy showed that all the stoichiometries had predominantly spherical-like morphologies. Cyclic voltammetry, electrochemical impedance spectroscopy analysis and the photovoltaic performances of the DSSCs fabricated using the different Ni _x Se _y CEs revealed that selenium rich stoichiometries performed better than the nickel rich ones. Consequently, the catalytic activity towards the redox reaction of the triiodide/iodide electrolyte and hence the power conversion efficiency (PCE) followed the order of NiSe₂ > Ni₃Se₄ > Ni_0.85Se > NiSe > Ni₃Se₂ with PCE values of 3.31%, 3.25%, 3.17%, 2.35% and 1.52% respectively under ambient conditions.

Electroless Plating of NiFeP Alloy on the Surface of Silicon Photoanode for Efficient Photoelectrochemical Water Oxidation

N-type silicon is a kind of semiconductor with a narrow band gap that has been reported as an outstanding light-harvesting material for photoelectrochemical (PEC) reactions. Decorating a thin catalyst layer on the n-type silicon surface can provide a direct and effective route toward PEC water oxidation. However, most of catalyst immobilization methods for reported n-type silicon photoanodes have been based on energetically demanding, time-consuming, and high-cost processes. Herein, a high-performance NiFeP alloy (NiFeP)-decorated n-type micro-pyramid silicon array (n-Si) photoanode (NiFeP/n-Si) was prepared by a fast and low-cost electroless deposition method for light-driven water oxidation reaction. The saturated photocurrent density of NiFeP/n-Si can reach up to ∼40 mA cm^-2, and a photocurrent density of 15.5 mA cm^-2 can be achieved at 1.23 V_RHE under light illumination (100 mW cm^-2, AM1.5 filter), which is one of the most promising silicon-based photoanodes to date. The kinetic studies showed that the NiFeP on the silicon photoanodes could significantly decrease the interfacial charge recombination between the n-type silicon surface and electrolyte.

Quasi-hydrophilic black silicon photocathodes with inverted pyramid arrays for enhanced hydrogen generation

Micro-/nanostructured silicon (Si) photoelectrodes are promising for efficient solar-driven water splitting. In this work, an elaborate study on textured Si photocathodes is reported. Compared to conventional textured Si photocathodes, the well-designed Si photocathode with randomly-distributed inverted pyramid arrays (SiIPs) generates a larger photovoltage of 440 mV for its higher effective minority carrier density, and produces a higher photocurrent density at a high reverse bias voltage due to its quasi-hydrophilicity. With the help of cobalt disulfide (CoS₂) nanocrystals, sluggish charge kinetics of SiIP photocathodes can be further improved. The optimal SiIP/CoS₂ photocathode yields an onset potential of 0.22 V vs. reversible hydrogen electrode (RHE) and a saturated photocurrent density of 10.4 mA cm^-2 at -0.45 V (vs. RHE). Besides, this cathode produces a stable photocurrent density of ∼6.60 mA cm^-2 at 0 V (vs. RHE) for 12 000 s in acidic media. Notably, our work presents a facile and inexpensive method to fabricate efficient Si photoelectrodes, which may promote the evolution of textured Si-based electrodes for potential photoelectrochemical and photocatalytic applications.

NiSe2/CdS composite nanoflakes photocatalyst with enhanced activity under visible light

Degrading organic pollutants using a photocatalyst under visible light is one of the effective ways to solve the increasingly serious environmental pollution problem. In this work, we have loaded a small amount of NiSe₂ nanoflakes on the surface of CdS using a simple and low-cost solvothermal synthesis method. The samples were characterized with detailed X-ray powder diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), electrochemical impedance spectroscopy (EIS), photocurrent, photoluminescence spectrometer (PL), photocatalytic properties, etc. The results show that a 2 mol% load of NiSe₂ increases the rate of degradation of Rhodamine B (RhB) to more than twice the original rate (0.01000 min⁻¹versus 0.00478 min⁻¹). Meanwhile, the sample has excellent stability. The improved photocatalytic properties can be attributed to the face-to-face contact between the nanoflakes, accelerated separation and transfer of photon-generated carriers. This work provides a suitable co-catalyst that can be used to optimize the performance of other photocatalytic materials.

The obtained NiSe₂/CdS composite nanoflakes exhibit greatly enhanced photocatalytic properties due to the accelerated separation of photon-generated carriers.