In Situ Molecular-Level Observation of Methanol Catalysis at the Water-Graphite Interface

Simultaneous quantification of Young's modulus and dispersion forces with nanoscale spatial resolution

Many advances in polymers and layered materials rely on a precise understanding of the local interactions between adjacent molecular or atomic layers. Quantifying dispersion forces at the nanoscale is particularly challenging with existing methods often time consuming, destructive, relying on surface averaging or requiring bespoke equipment. Here, we present a non-invasive method able to quantify the local mechanical and dispersion properties of a given sample with nanometer lateral precision. The method, based on atomic force microscopy (AFM), uses the frequency shift of a vibrating AFM cantilever in combination with established contact mechanics models to simultaneously derive the Hamaker constant and the effective Young's modulus at a given sample location. The derived Hamaker constant and Young's modulus represent an average over a small (typically <100) number of molecules or atoms. The oscillation amplitude of the vibrating AFM probe is used to select the length-scale of the features to analyse, with small vibrations able to resolve the contribution of sub-nanometric defects and large ones exploring effectively homogeneous areas. The accuracy of the method is validated on a range of 2D materials in air and water as well as on polymer thin films. We also provide the first experimental measurements of the Hamaker constant of HBN, MoT2, WSe2and polymer films, verifying theoretical predictions and computer simulations. The simplicity and robustness of the method, implemented with a commercial AFM, may support a broad range of technological applications in the growing field of polymers and nanostructured materials where a fine control of the van der Waals interactions is crucial to tune their properties.

Interfacial Liquid Water on Graphite, Graphene, and 2D Materials

The optical, electronic, and mechanical properties of graphite, few-layer, and two-dimensional (2D) materials have prompted a considerable number of applications. Biosensing, energy storage, and water desalination illustrate applications that require a molecular-scale understanding of the interfacial water structure on 2D materials. This review introduces the most recent experimental and theoretical advances on the structure of interfacial liquid water on graphite-like and 2D materials surfaces. On pristine conditions, atomic-scale resolution experiments revealed the existence of 1-3 hydration layers. Those layers were separated by ∼0.3 nm. The experimental data were supported by molecular dynamics simulations. However, under standard working conditions, atomic-scale resolution experiments revealed the presence of 2-3 hydrocarbon layers. Those layers were separated by ∼0.5 nm. Linear alkanes were the dominant molecular specie within the hydrocarbon layers. Paradoxically, the interface of an aged 2D material surface immersed in water does not have water molecules on its vicinity. Free-energy considerations favored the replacement of water by alkanes.

Interfacial layering of hydrocarbons on pristine graphite surfaces immersed in water

Interfacial water participates in a wide range of phenomena involving graphite, graphite-like and 2D material interfaces. Recently, several high-spatial resolution experiments have questioned the existence of hydration layers on graphite, graphite-like and 2D material surfaces. Here, 3D AFM was applied to follow in real-time and with atomic-scale depth resolution the evolution of graphite-water interfaces. Pristine graphite surfaces upon immersion in water showed the presence of several hydration layers separated by a distance of 0.3 nm. Those layers were short-lived. After several minutes, the interlayer distance increased to 0.45 nm. At longer immersion times (∼50 min) we observed the formation of a third layer. An interlayer distance of 0.45 nm characterizes the layering of predominantly alkane-like hydrocarbons. Molecular dynamics calculations supported the experimental observations. The replacement of water molecules by hydrocarbons on graphite is spontaneous. It happens whenever the graphite-water volume is exposed to air.

Cosolvents Restrain Self-Assembly of a Fibroin-Like Peptide on Graphite

Controllable self-assembly of peptides on solid surfaces has been investigated for establishing functional bio/solid interfaces. In this work, we study the influence of organic solvents on the self-assembly of a fibroin-like peptide on a graphite surface. The peptide has been designed by mimicking fibroin proteins to have strong hydrogen bonds among peptides enabling their self-assembly. We have employed cosolvents of water and organic solvents with a wide range of dielectric constants to control peptide self-assembly on the surface. Atomic force microscopy has revealed that the peptides self-assemble into highly ordered monolayer-thick linear structures on graphite after incubation in pure water, where the coverage of peptides on the surface is more than 85%. When methanol is mixed, the peptide coverage becomes zero at a threshold concentration of 30% methanol on graphite and 25% methanol on MoS₂. The threshold concentration in ethanol, isopropanol, dimethyl sulfoxide, and acetone varies depending on the dielectric constant with restraining self-assembly of the peptides, and particularly low dielectric-constant protic solvents prevent the peptide self-assembly significantly. The observed phenomena are explained by competitive surface adsorption of the organic solvents and peptides and the solvation effect of the peptide assembly.

Expanded Polytetrafluoroethylene/Graphite Composites for Easy Water/Oil Separation

Oil spills in the ocean greatly threaten local environments, marine creatures, and coastal economies. An automatic water/oil separation material system was proposed in this study, and a tubular geometry was chosen to demonstrate the water/oil separation efficiency and effectiveness. The water/oil separation tubes were made of expanded polytetrafluoroethylene (ePTFE) and graphite composites. The permeation pressures of water and oil through the tube walls were tuned by adjusting the ePTFE microstructure, which, in turn, depended on the degree of expansion and the graphite content. Fourier-transform infrared spectroscopy was performed to confirm the compositions of the ePTFE/graphite composites, and a scanning electron microscope was used to examine the microstructure and morphology of the expanded PTFE/graphite composite tubes. When a proper pressure was applied, which was higher than the oil's permeation pressure (3.0 kPa) but lower than the water's permeation pressure (57 kPa), the oil leaked out of the tube walls while the water went through the ePTFE/graphite tubes. As such, the water/oil mixture could be separated and collected in different containers or an outer tube. Due to this automatic separation, the whole process could be done continuously and conveniently, thus exhibiting great potential in the practical applications of oil spill and water separation/remediation.

Origin of Ubiquitous Stripes at the Graphite-Water Interface

The investigation of solid-liquid interfaces is pivotal for understanding processes like wetting, corrosion, and mineral dissolution and growth. The graphite-water interface constitutes a prime example for studying the water structure at a seemingly hydrophobic surface. Surprisingly, in a large number of atomic force microscopy (AFM) experiments, well-ordered stripes have been observed at the graphite-water interface. Although many groups have reported on the observation of stripes at this interface, fundamental properties and, in particular, the origin of the stripes are still under debate. Proposed origins include contamination, interplanar stacking of graphene layers, formation of methanol-water nanostructures, and adsorption of nitrogen molecules. Especially, the latter interpretation has received considerable attention because of its potential impact on explaining the long-range nature of the hydrophobic interaction. In this study, we demonstrate that these stripes readily form when using standard plastic syringes to insert the water into the AFM instrument. In contrast, when clean glass syringes are used instead, no such stripes form even though nitrogen was present. We, therefore, conclude that contaminations from the plastic syringe rather than nitrogen constitute the origin of the stripes we observe. We provide high-resolution AFM data that reveal detailed structural insights into the arrangement of the stripes. The rich variability of our data suggests that the stripes might be composed of several different chemical species. Still, we cannot rule out that the stripes observed in the literature might originate from other sources; our study offers a rather straightforward explanation for the origin of the stripes. In the view of these results, we propose to carefully reconsider former assignments.

Self-assembly of small molecules at hydrophobic interfaces using group effect

Although common in nature, the self-assembly of small molecules at sold-liquid interfaces is difficult to control in artificial systems. The high mobility of dissolved small molecules limits their residence at the interface, typically restricting the self-assembly to systems under confinement or with mobile tethers between the molecules and the surface. Small hydrogen-bonding molecules can overcome these issues by exploiting group-effect stabilization to achieve non-tethered self-assembly at hydrophobic interfaces. Significantly, the weak molecular interactions with the solid makes it possible to influence the interfacial hydrogen bond network, potentially creating a wide variety of supramolecular structures. Here we investigate the nanoscale details of water and alcohols mixtures self-assembling at the interface with graphite through group-effect. We explore the interplay between inter-molecular and surface interactions by adding small amounts of foreign molecules able to interfere with the hydrogen bond network and systematically varying the length of the alcohol hydrocarbon chain. The resulting supramolecular structures forming at room temperature are then examined using atomic force microscopy with insights from computer simulations. We show that the group-based self-assembly approach investigated here is general and can be reproduced on other substrates such as molybdenum disulphide and graphene oxide, potentially making it relevant for a wide variety of systems.

Atomic-scale mapping of hydrophobic layers on graphene and few-layer MoS2 and WSe2 in water

The structure and the role of the interfacial water in mediating the interactions of extended hydrophobic surfaces are not well understood. Two-dimensional materials provide a variety of large and atomically flat hydrophobic surfaces to facilitate our understanding of hydrophobic interactions. The angstrom resolution capabilities of three-dimensional AFM are exploited to image the interfacial water organization on graphene, few-layer MoS2 and few-layer WSe2. Those interfaces are characterized by the existence of a 2 nm thick region above the solid surface where the liquid density oscillates. The distances between adjacent layers for graphene, few-layer MoS2 and WSe2 are ~0.50 nm. This value is larger than the one predicted and measured for water density oscillations (~0.30 nm). The experiments indicate that on extended hydrophobic surfaces water molecules are expelled from the vicinity of the surface and replaced by several molecular-size hydrophobic layers.