Stabilization of Cobalt-Polyoxometalate over Poly(ionic liquid) Composites for Efficient Electrocatalytic Water Oxidation

Modulating Core Polarity in Metal-free Covalent Organic Frameworks for Selective Electrocatalytic Hydrogen Peroxide Production

Tuning the charge density at the active site to balance the adsorption ability and reactivity of oxygen is extremely significant for driving a two-electron oxygen reduction reaction (ORR) to produce hydrogen peroxide (H2O2). Herein, we have highlighted the influence of intermolecular polarity in covalent organic frameworks (COFs) on the efficiency and selectivity of electrochemical H2O2 production. Different C3 symmetric building blocks have been utilized to regulate the charge density at the active sites. The benzene-cored COF, which exhibits reduced polarity than the triazine-cored COF, displayed enhanced performance in H2O2 production, achieving 93.1 % selectivity for H2O2 at 0.4 V with almost two-electron transfer and a faradaic efficiency of 90.5 %. In-situ electrochemical Raman spectroscopy and scanning electrochemical microscopy (SECM) were employed to confirm H2O2 generation and analyze spatial reactivity patterns. These techniques provided detailed insights into localized catalytic behavior, emphasizing the influence of core polarity.

Visualizing Electrochemical CO2 Conversion via the Emerging Scanning Electrochemical Microscope: Fundamentals, Applications and Perspectives

With the rapid development and maturity of electrochemical CO2 conversion involving cathodic CO2 reduction reaction (CO2RR) and anodic oxygen evolution reaction (OER), conventional ex situ characterizations gradually fall behind in detecting real-time products distribution, tracking intermediates, and monitoring structural evolution, etc. Nevertheless, advanced in situ techniques, with intriguing merits like good reproducibility, facile operability, high sensitivity, and short response time, can realize in situ detection and recording of dynamic data, and observe materials structural evolution in real time. As an emerging visual technique, scanning electrochemical microscope (SECM) presents local electrochemical signals on various materials surface through capturing micro-current caused by reactants oxidation and reduction. Importantly, SECM holds particular potentials in visualizing reactive intermediates at active sites and obtaining instantaneous morphology evolution images to reveal the intrinsic reactivity of active sites. Therefore, this review focuses on SECM fundamentals and its specific applications toward CO2RR and OER, mainly including electrochemical behavior observation on local regions of various materials, target products and onset potentials identification in real-time, reaction pathways clarification, reaction kinetics exploration under steady-state conditions, electroactive materials screening and multi-techniques coupling for a joint utilization. This review undoubtedly provides a leading guidance to extend various SECM applications to other energy-related fields.

Deciphering the work function induced local charge regulation towards activating an octamolybdate cluster-based solid for acidic water oxidation

The advancement of highly robust and efficient electrocatalysts for the oxygen evolution reaction (OER) under acidic conditions is imperative for the sustainable production of green hydrogen. In accomplishing sustainable and sturdy electrocatalysts for oxygen evolution at low pH, the challenge is tough for non-iridium/ruthenium-based electrocatalysts. This study elaborates on the intrinsic alterations in electronic arrangements and structural disorder upon the precise activation of an octamolybdate cluster-based solid [{Cu(pz)4}2Mo8O26]·2H2O through room temperature grinding with rGO (reduced graphene oxide), resulting in enhanced conductivity, stability, and activity of the electrocatalyst towards the acidic OER without employing any benchmark metal ion (Ru or Ir). Additionally, the work function of the composites was found to be low compared to that of pristine polyoxometalates (POMs), indicative of the improved conducive behavior, which is lacking in the POM structure. The catalyst displays a notably reduced overpotential of 185 mV to achieve a current density of 10 mA cm-2, coupled with significant stability lasting 24 hours at a higher current density of 100 mA cm-2. These findings propose the manipulation of crystalline POMs with highly conductive non-metallic elements to facilitate superior water oxidation at lower pH levels which can help in the production of green hydrogen.

Designing a hybrid nanomaterial based on Cr-containing polyoxometalate and graphene oxide as an electrocatalyst for the hydrogen evolution reaction

A new polyoxometalate (POM)-based hybrid nanomaterial (denoted as PMo11-Cr-mGO) was designed via covalent interaction between the Cr(acac)3 complex and [PMo11O39]7- followed by immobilization on the surface of modified graphene oxide (mGO). The prepared nanomaterial was characterized using a series of physicochemical techniques. X-ray diffraction (XRD), Raman analysis, transmission electron microscopy (TEM), and FE-SEM-EDS revealed the preservation of layered GO during the formation of the desired hybrid nanomaterial. Fourier transform infrared (FT-IR), X-ray photoelectron spectroscopy (XPS), and elemental analysis confirmed the immobilization of POM (PMo11-Cr) on the surface of mGO and the formation of PMo11-Cr-mGO. In order to evaluate the performance of PMo11-Cr-mGO in the hydrogen evolution reaction (HER), electrochemical measurements were also performed. The resulting PMo11-Cr-mGO exhibited excellent HER activities with a low overpotential of 153 mV at 10 mA cm-2 and good durability in acidic media, thus emerging as one of the most efficient POM-based electrocatalysts.

Real-time screening of NixBy bifunctional electrocatalysts for overall NH3 synthesis via SG-TC SECM

Electrochemical ammonia synthesis, which couples oxygen evolution at the anode with nitrogen reduction at the cathode, holds great significance for future food and energy needs. Both of these half-cell reactions determine the overall cell potential and efficiency of the process. However, the employment of different catalysts on either side, due to discrete mechanisms, increases the complexity and material processing costs of the system, where the designing of a bifunctional catalyst active towards both the NRR and OER is of huge significance. Unfortunately, the initial screening of the designed catalysts via physical characterizations, optical methods and other techniques, does not provide details about the electrochemical activity. The scanning electrochemical microscopy (SECM) technique can be useful to screen multi-catalysts at the same time for their electrochemical activities. Herein, we employed the sample generation-tip collection (SG-TC) mode of SECM to screen the designed NixBy catalysts before half-cell investigations, which suggested that the catalyst synthesized via sonochemical reduction (SR), i.e. NixBy (SR), was a better catalyst. This inference was in accordance with the half-cell NRR and OER measurements (FE: 49% for NH3 production, OER overpotential: 300 mV). By virtue of this remarkable bifunctional activity, the NRR-OER coupled full cell was assembled, which initiated the NH3 production at just 1.7 V and produced NH3 (1.08 mg h-1 mgcat-1) at the cathode and O2 (0.81 mg h-1 mgcat-1) at the anode after 2 h of electrolysis at 1.9 V.

Modulation of the Band Gap and Redox Properties by Mixed Addenda in Sandwich Polyoxometalates

Due to the wide range of applications of band-gap engineering in optoelectronics and photocatalysis, the rational design of polyoxometalate (POM) frameworks is highly desired. Here, we have successfully synthesized a series of mixed addenda (Mo and W) sandwich POMs by systematically varying pH, concentrations of salts, and counterions in Weakley-type sandwich POMs by incorporating Mo into the framework of tetrasubstituted sandwich POMs. Crystallographic analysis reveals the centrosymmetric structure; with variation in the Mo to W ratio, Mo preferentially binds to μ2 oxygen connected to transition metals in the sandwich position. UV-visible spectroscopy, electrochemical, and theoretical modeling rationalize the band-gap modulations. Theoretical studies and cyclic voltammograms indicate that during the reduction, the incoming electrons preferentially go to substituted transition metals followed by Mo. Flat band potential calculated from the Mott-Schottky enables tuning of the electronic properties of composites based on these sandwich POMs. Moreover, the dioxygen binding and activation studies of these polyoxometalates have been highlighted.

Physico- and Electrochemical Properties of First-Row Transition-Metal-Substituted Sandwich Polyoxometalates

The physico- and electrochemical behaviors of a series of [WZn₃(H₂O)₂(ZnW₉O₃₄)₂]^12- (Zn-WZn₃) and its first-row transition-metal-substituted analogues [WZn(TM)₂(H₂O)₂(ZnW₉O₃₄)₂]^12- (Zn-WZn(TM)₂; TM = Mn^II, Co^II, Fe^III, Ni^II and Cu^II) are reported. Various spectroscopic studies, including Fourier transform infrared (FTIR) spectroscopy, UV-visible spectroscopy, electrospray ionization (ESI)-mass spectrometry, and Raman spectroscopy, show similar spectral patterns in all sandwich polyoxometalates (POMs) because of their isostructural geometry and constancy of the overall negative charge (-12). However, the electronic properties highly depend on the transition metals at the "sandwich core" and correlate well with the density functional theory (DFT) study. Further, depending on the substituted TM atoms, there is a decrease in the highest occupied molecular orbital-lowest unoccupied molecular orbital (HOMO-LUMO) band-gap energy in these transition-metal-substituted POM (TMSP) complexes wrt Zn-WZn₃, as confirmed by diffuse reflectance spectroscopy and DFT study. Cyclic voltammetry reveals that the electrochemistry of these sandwich POMs (Zn-WZn₃ and TMSPs) is highly dependent on the pH of the solution. Moreover, the dioxygen binding/activation studies of these polyoxometalates show that Zn-WZn₃ and Zn-WZnFe₂ have better efficiency toward dioxygen binding, as confirmed by FTIR spectroscopy, Raman spectroscopy, X-ray photoelectron spectroscopy (XPS), and thermogravimetric analysis (TGA), which is also reflected in their catalytic activity toward imine synthesis.

Oxygen Evolution Reaction Driven by Charge Transfer from a Cr Complex to Co-Containing Polyoxometalate in a Porous Ionic Crystal

Considerable efforts have been devoted to developing oxygen evolution reaction (OER) catalysts based on transition metal oxides. Polyoxometalates (POMs) can be regarded as model compounds of transition metal oxides, and cobalt-containing POMs (Co-POMs) have received significant interest as candidates. Nanocomposites based on Co-POMs have been reported to show high OER activities due to synergistic effects among the components; however, the role of each component is unclear due to its complex structure. Herein, we utilize porous ionic crystals (PICs) based on Co-POMs, which enable a composition-structure-function relationship to be established to understand the origin of the synergistic catalysis. Specifically, a Keggin-type POM [α-CoW₁₂O₄₀]^6- and a Cr complex [Cr₃O(OOCCH₂CN)₆(H₂O)₃]⁺ are implemented as PIC building blocks for the OER under nonbasic conditions. The potentially OER-active but highly soluble [α-CoW₁₂O₄₀]^6- was successfully anchored in the crystalline PIC matrix via Coulomb interactions and hydrogen bonding induced by polar cyano groups of the Cr complex. The PIC exhibits efficient and sustained OER catalytic activity, while each building block is inactive. The Tafel slope of the linear sweep voltammetry curve and the relatively large kinetic isotope effect value suggest that elementary steps closely related to the OER rate involve single-electron and proton transfer reactions. Electrochemical and spectroscopic studies clearly show that the synergistic catalysis originates from the charge transfer from the Cr complex to [α-CoW₁₂O₄₀]^6-; the increased electron density of [α-CoW₁₂O₄₀]^6- may increase its basicity and accelerate proton abstraction as well as enhance electron transfer to stabilize the reaction intermediates adsorbed on [α-CoW₁₂O₄₀]^6-.

Polyoxometalate-based metal–organic complexes and their derivatives as electrocatalysts for energy conversion in aqueous systems

The research progress on polyoxometalate-based metal–organic complexes and their derivatives as electrocatalysts in sustainable and clean energy conversion applications in aqueous systems is summarized.

Co/Ni-polyoxotungstate photocatalysts as precursor materials for electrocatalytic water oxidation

An open-core cobalt polyoxometalate (POM) [(A-α-SiW9O34)Co4(OH)3(CH3COO)3]8-Co(1) and its isostructural Co/Ni-analogue [(A-α-SiW9O34)Co1.5Ni2.5(OH)3(CH3COO)3]8-CoNi(2) were synthesized and investigated for their photocatalytic and electrocatalytic performance. Co(1) shows high photocatalytic O2 yields, which are competitive with leading POM water oxidation catalysts (WOCs). Furthermore, Co(1) and CoNi(2) were employed as well-defined precursors for heterogeneous WOCs. Annealing at various temperatures afforded amorphous and crystalline CoWO4- and Co1.5Ni2.5WO4-related nanoparticles. CoWO4-related particles formed at 300 °C showed substantial electrocatalytic improvements and were superior to reference materials obtained from co-precipitation/annealing routes. Interestingly, no synergistic interactions between cobalt and nickel centers were observed for the mixed-metal POM precursor and the resulting tungstate catalysts. This stands in sharp contrast to a wide range of studies on various heterogeneous catalyst types which were notably improved through Co/Ni substitution. The results clearly demonstrate that readily accessible POMs are promising precursors for the convenient and low-temperature synthesis of amorphous heterogeneous water oxidation catalysts with enhanced performance compared to conventional approaches. This paves the way to tailoring polyoxometalates as molecular precursors with tuneable transition metal cores for high performance heterogeneous electrocatalysts. Our results furthermore illustrate the key influence of the synthetic history on the performance of oxide catalysts and highlight the dependence of synergistic metal interactions on the structural environment.

Surface Atom Regulation on Polyoxometalate Electrocatalyst for Simultaneous Low-Voltage H2 Production and Phenol Degradation

The electrocatalytic hydrogen evolution reaction is an ideal method for H₂ production. To improve the performance of polyoxometalate-based electrocatalyst in the hydrogen evolution reaction, one O^2- in polyoxometalate is replaced by S^2-. This weakens the binding of polyoxometalate to H*, facilitates its desorption, and improves the H₂ generation property. Vulcanized polyoxometalate only requires 55 mV to achieve 10 mA·cm^-2 current in the hydrogen evolution reaction. This electrocatalyst also exhibits promising performance in phenol degradation reaction, which is an ideal substitute for high-energy-consuming oxygen evolution reaction in H₂ production due to low voltage to drive. To acquire 100 and 200 mA·cm^-2 in the phenol degradation reaction, this vulcanized polyoxometalate only consumes 1.38 and 1.41 V. With this electrocatalyst working as a cathode and an anode simultaneously, an electrolyzer is constructed by employing phenol-containing KOH as an electrolyte. To obtain 100 and 200 mA·cm^-2 current, the electrolyzer only requires 1.54 and 1.57 V. Because energy-efficient phenol degradation reaction occurs, these values are obviously lower than the oxygen evolution reaction involved in the overall water-splitting H₂ production. This work provides a universal method to enhance the hydrogen evolution reaction (HER) activity of polyoxometalates. Furthermore, a new method is explored, which achieves energy conservation and phenol degradation simultaneously in H₂ production.

Cardiac troponin I photoelectrochemical sensor: {Mo368} as electrode donor for Bi2S3 and Au co-sensitized FeOOH composite

A suitable electron donor, which guarantees the stability of the whole system, is considered as the driving force of the PEC sensor. Nowadays, searching appropriate electron donor is still one of the orientations to explorate in the field of sensor. Na₄₈[H₄₉₆Mo₃₆₈O₁₄₆₄S₄₈]·ca.1000H₂O (abbr. {Mo₃₆₈}), as a type of polyoxometalate, has perfect morphology, definite size and unique electronic property. Due to the prominent water solubility, {Mo₃₆₈} usually releases small cations and exists as large anions in the ultrapure water. The interesting property endows {Mo₃₆₈} with excellent reducibility, which provides great feasibility to become an outstanding electron donor. In addition, FeOOH prepared through a simple operation owns high adsorption capacity, which ensures the fastness of other materials. Subsequently, the narrow band-gap of Bi₂S₃ and the unique noble metal properties of Au nanoparticles are utilized to co-sensitize FeOOH to improve the light-harvesting capability and photoelectric conversion efficiency. Combined with the specificity recognition of antigen and antibody, a novel photoelectrochemical sensor is constructed with a wide detection range of 1.00 pg mL^-1 - 100 ng mL^-1 and low detection limit (0.76 pg mL^-1), which achieves the sensitive detection of cardiac troponin I in early diagnosis of cardiovascular disease.

Polyoxometalate-based composite materials in electrochemistry: state-of-the-art progress and future outlook

Polyoxometalates (POMs) have been developed as a class of promising smart material candidates not only due to their multitudinous architectures but also their good redox activities and outstanding electron and proton transport capacities. Recently, abundant studies on POMs composited with metal nanoparticles (NPs), carbon materials (e.g., carbon nanotubes (CNTs), carbon quantum dots (CQDs), graphene), and conducting polymers or highly-porous framework materials (e.g., MOFs, ZIFs) have been performed and POM-based composite materials (PCMs) undoubtedly show enhanced stability and improved electrochemical performances. Therefore, POMs and PCMs are of increasing interest in electrocatalysis, electrochemical detection and energy-related fields (such as fuel cells, redox flow batteries and so on), thus, developing novel PCMs has long been the key research topic in POM chemistry. This review mainly summarizes some representative advances in PCMs with electrochemical applications in the past ten years, expecting to provide some useful guidance for future research.

Investigation of New B-Site-Disordered Perovskite Oxide CaLaScRuO6+δ: An Efficient Oxygen Bifunctional Electrocatalyst in a Highly Alkaline Medium

Energy storage and conversion driven by electro- or photocatalyst is a highly exciting field of research, and generations of effective and durable oxide catalysts have received much attention in this field. Here, we report A-site lanthanum-doped oxygen-rich quinary oxide CaLaScRuO_6+δ synthesized by adopting the solid-state reaction method and characterized by various techniques such as powder X-ray diffraction, neutron diffraction, energy-dispersive X-ray spectroscopy, inductively coupled plasma-atomic emission spectrometry, Raman spectroscopy, and temperature-programmed reduction in the presence of a hydrogen atmosphere (H₂-TPR). X-ray absorption study confirms the existence of mixed valent Ru ions in the structure, which enhances the oxygen stoichiometry for the partial balance of an extra cationic charge. Neutron powder diffraction and reduction of the material in a hydrogen atmosphere (H₂-TPR) can confirm the oxygen overstoichiometry of the catalyst. The present material works as an efficient and robust oxygen bifunctional electrocatalyst for ORR/OER (oxygen evolution reaction/oxygen reduction reaction) followed by four-electron transfer pathway in a strong (1 M KOH) alkaline medium. The catalytic nature of the designed structural and chemical flexible perovskite is a novel example of an electrocatalyst for the oxygen bifunctional activity.

Additive-Free Baeyer–Villiger Oxidation of Cyclic Ketone Catalyzed by Carboxylic-Functionalized Poly(Ionic Liquids) and Polyoxometalate Ionic Self-Assemblies

Two carboxylic functionalized poly(ionic liquids) and polyoxometalate ionic self-assemblies with tunable amphiphilic and oxidative activity and porous structure were designed and synthesized. They were used as efficient heterogeneous catalysts exhibiting excellent catalytic activity and quite stable reusability in additive–free Baeyer-Villiger oxidation of cyclic ketones, directly using 30% H2O2 solution in liquids–phase. Under optimum conditions, the corresponding lactones were obtained with yields ranging from 59.6 to 90.5%. The unique combination of carboxylic group with polyoxometalate anion, amphiphilic property, and porous structure is revealed to be responsible for their excellent catalytic performances in oxidation.

PVIM–Co5POM/MNC composite as a flexible electrode for the ultrasensitive and highly selective non-enzymatic electrochemical detection of cholesterol

A novel electrochemical sensor was developed based on poly(ionic liquid) [PVIM]–cobalt polyoxometalate (Co₅POM) supported on carbonaceous materials for the highly selective and ultrasensitive non-enzymatic detection of cholesterol.