Highly Active Protein Surfaces Enabled by Plant-Based Polyphenol Coatings

Metal-Polyphenol Network-Mediated Protein Encapsulation Strategy Facilitating the Separation of Proteins and Metabolites in Biospecimens

Access to both protein and metabolite biomarker information in biospecimens from trace samples remains a significant challenge, and it is necessary to separate proteins and metabolites before analysis. In this work, the Fe₃O₄@SiO₂@Proteins@Metal-polyphenol network (MPN) was successfully constructed and applied to separate metabolites and proteins. Tannic acid (TA) and Cu²⁺ were involved in the synthesis of MPN because of rapid degradation and maintaining the assay performance of proteins. There are a variety of interactions between TA and proteins, including hydrogen-bonding, hydrophobic, and ionic interactions. Moreover, benefiting from the small molecule permeability and surface adherence of MPN, proteins were encapsulated and immobilized on the surface of substrates with the growth of MPN. At the same time, endogenous metabolites remained dispersed in the supernatant. In the model sample and real biospecimen cases, the protein biomarkers (e.g., carcinoembryonic antigen and alanine aminotransferase) were encapsulated on the surface of Fe₃O₄@SiO₂, which allowed the isolation of proteins from the original matrix, as well as release and analysis in a short time. Meanwhile, the metabolites in the produced supernatant were analyzed by LC-MS/MS. By the self-assembly and disassembly of MPN, the group differences of proteins and metabolites between physiological and pathological biospecimens are correctly characterized without multisampling. Overall, an MPN-mediated separation strategy of biomarkers was proposed, and MPN facilitated a "two birds with one stone" approach, where the proteins were encapsulated and immobilized in the precipitation while endogenous metabolites distributed in the produced supernatant, opening a new chapter in the application of MPNs.

Can polyphenolic surface modifications prevent fungal colonization of titanium dental implants?

Oral biofilms can be a major health problem causing infections and chronic inflammation of mucosal tissue. While much effort is put in the investigation of bacteria in biofilms, the role of fungi is often neglected, despite Candida albicans playing a key role in the formation of multispecies oral biofilms. With the rise of antibiotic resistance, new strategies to reduce microbial growth need to be found. Therefore, plant derived polyphenolic molecules have been suggested to reduce both adhesion and growth of pathogenic bacteria and fungi. In this study, we investigated the use of polyphenolic coatings to reduce adhesion and biofilm formation of C. albicans BWP17 on titanium implants. Tannic acid and pyrogallol coatings altered the hydrophobic and charge properties of titanium surfaces, and both compounds were gradually released as active molecules over time. Despite such effects, we found no significant inhibition on growth and biofilm formation of C. Albicans, indicating that the release of active molecules from the coatings did not reach relevant inhibitory concentrations. However, a potential antibiofilm effect was observed by the pH-dependent disassembly of the polyphenolic layer, which caused the biofilm to detach. Hence, further efforts are required to create tailored implant surfaces, which sustainably reduce microbial growth and adhesion.

Cellulase Immobilization on Nanostructured Supports for Biomass Waste Processing

Nanobiocatalysts, i.e., enzymes immobilized on nanostructured supports, received considerable attention because they are potential remedies to overcome shortcomings of traditional biocatalysts, such as low efficiency of mass transfer, instability during catalytic reactions, and possible deactivation. In this short review, we will analyze major aspects of immobilization of cellulase-an enzyme for cellulosic biomass waste processing-on nanostructured supports. Such supports provide high surface areas, increased enzyme loading, and a beneficial environment to enhance cellulase performance and its stability, leading to nanobiocatalysts for obtaining biofuels and value-added chemicals. Here, we will discuss such nanostructured supports as carbon nanotubes, polymer nanoparticles (NPs), nanohydrogels, nanofibers, silica NPs, hierarchical porous materials, magnetic NPs and their nanohybrids, based on publications of the last five years. The use of magnetic NPs is especially favorable due to easy separation and the nanobiocatalyst recovery for a repeated use. This review will discuss methods for cellulase immobilization, morphology of nanostructured supports, multienzyme systems as well as factors influencing the enzyme activity to achieve the highest conversion of cellulosic biowaste into fermentable sugars. We believe this review will allow for an enhanced understanding of such nanobiocatalysts and processes, allowing for the best solutions to major problems of sustainable biorefinery.

Versatile polyphenolic platforms in regulating cell biology

Polyphenolic materials are a class of fascinating and versatile bioinspired materials for biointerfacial engineering. In particular, due to the presence of active chemical groups, a series of unique physicochemical properties become accessible and tunable of the as-prepared polyphenolic platforms, which could delicately regulate the cell activities via cell-material contact-dependent interactions. More interestingly, polyphenols could also affect the cell behaviors via cell-material contact-independent manner, which arise due to their intrinsically functional characteristics (e.g., antioxidant and photothermal behaviors). As such, a comprehensive understanding on the relationship between material properties and desired biomedical applications, as well as the underlying mechanism at the cellular and molecular level would provide material design principles and accelerate the lab-to-clinic translation of polyphenolic platforms. In this review, we firstly give a brief overview of cell hallmarks governed by surrounding cues, followed by the introduction of polyphenolic material engineering strategies. Subsequently, a detailed discussion on cell-polyphenols contact-dependent interfacial interaction and contact-independent interaction was also carefully provided. Lastly, their biomedical applications were elaborated. We believe that this review could provide guidances for the rational material design of multifunctional polyphenols and extend their application window.

Supramolecular Assembly of Multifunctional Collagen Nanocomposite Film via Polyphenol-Coordinated Clay Nanoplatelets

Functional bionanocomposites have evoked immense research interests in many fields including biomedicine, food packaging, and environmental applications. Supramolecular self-assembled bionanocomposite materials fabricated by biopolymers and two-dimensional (2D) nanomaterials have particularly emerged as a compelling material due to their biodegradable nature, hierarchical structures, and designable multifunctions. However, construction of these materials with tunable properties has been still challenging. Here, we report a self-assembled, flexible, and antioxidative collagen nanocomposite film (CNF) via regulating supramolecular interactions of type I collagen and tannic acid (TA)-functionalized 2D synthetic clay nanoplatelets Laponite (LAP). Specifically, TA-coordinated LAP (LAP-TA) complexes were obtained via chelation and hydrogen bonding between TA and LAP clay nanoplatelets and further used to stabilize the triple-helical confirmation and fibrillar structure of the collagen via hydrogen bonding and electrostatic interactions, forming a hierarchical microstructure. The obtained transparent CNF not only exhibited the reinforced thermal stability, enzymatic resistance, tensile strength, and hydrophobicity but also good water vapor permeability and antioxidation. For example, the tensile strength was improved by over 2000%, and the antioxidant property was improved by 71%. Together with the simple fabrication process, we envision that the resulting CNF provides greater opportunities for versatile bionanocomposites design and fabrication serving as a promising candidate for emerging applications, especially food packaging and smart wearable devices.

Immobilization of glucose oxidase on bioinspired polyphenol coatings as a high-throughput glucose assay platform

Glucose oxidase (GOx) is an enzyme with important industrial and biochemical applications, particularly in glucose detection. Here we leveraged the oxidative self-polymerization phenomenon of simple polyphenols (pyrogallol or catechol) in the presence of polyethylenimine (PEI) to form adhesive coatings that enabled GOx immobilization on conventional multi-well plates. Immobilization was verified and optimized by directly measuring GOx activity inside the coated wells. Our results showed that incorporating PEI in polyphenol coatings enhanced their enzyme immobilization efficiency, with pyrogallol (PG)-based coatings displaying the greatest enzyme activity. The immobilized enzyme maintained similar affinity to glucose compared to the free enzyme. GOx-immobilized PG/PEI-coated wells exhibited intermediate recycling ability but excellent resistance to urea as a denaturing agent compared to the free enzyme. GOx-immobilized 96-well plates allowed the construction of a linear glucose calibration curve upon adding glucose standards, with a detection limit of 0.4–112.6 mg dL⁻¹, which was comparable to commercially available enzymatic glucose assay kits. The assay platform was also capable of effectively detecting glucose in rat plasma samples. Our findings present a simple enzyme immobilization technique that can be used to construct a glucose assay platform in a convenient multi-well format for high-throughput glucose quantification.

Glucose oxidase was immobilized on conventional multi-well plates via bioinspired polyphenol chemistry for convenient colorimetric quantitation of glucose.

Understanding Design Rules for Optimizing the Interface between Immobilized Enzymes and Random Copolymer Brushes

A long-standing goal in the field of biotechnology is to develop and understand design rules for the stabilization of enzymes upon immobilization to materials. While immobilization has sometimes been successful as a strategy to stabilize enzymes, the design of synthetic materials that stabilize enzymes remains largely empirical. We sought to overcome this challenge by investigating the mechanistic basis for the stabilization of immobilized lipases on random copolymer brush surfaces comprised of poly(ethylene glycol) methacrylate (PEGMA) and sulfobetaine methacrylate (SBMA), which represent novel heterogeneous supports for immobilized enzymes. Using several related but structurally diverse lipases, including Bacillus subtilis lipase A (LipA), Rhizomucor miehei lipase, Candida rugosa lipase, and Candida antarctica lipase B (CALB), we showed that the stability of each lipase at elevated temperatures was strongly dependent on the fraction of PEGMA in the brush layer. This dependence was explained by developing and applying a new algorithm to quantify protein surface hydrophobicity, which involved using unsupervised cluster analysis to identify clusters of hydrophobic atoms. Characterization of the lipases showed that the optimal brush composition correlated with the free energy of solvation per enzyme surface area, which ranged from -17.1 kJ/mol·nm² for LipA to -11.8 kJ/mol·nm² for CALB. Additionally, using this algorithm, we found that hydrophobic patches consisting of aliphatic residues had a higher free energy than patches consisting of aromatic residues. By providing the basis for rationally tuning the interface between enzymes and materials, this understanding will transform the use of materials to reliably ruggedize enzymes under extreme conditions.

Coffee Bean Polyphenols Can Form Biocompatible Template-free Antioxidant Nanoparticles with Various Sizes and Distinct Colors

Plant polyphenols have attracted attention in recent years due to their ability to undergo oxidative coupling reactions enabled by the presence of multiple phenolic hydroxyl groups, forming chemically versatile coatings and biocompatible nanoparticles (NPs) for various applications. The aim of this study was to investigate whether coffee bean aqueous extracts, which are known to be rich in polyphenols, could serve as a natural source of NP building blocks. Extracts were prepared by heating ground Arabica beans of varying roasting degrees in water with or without the addition of sodium metaperiodate or copper sulfate as an oxidizing agent, followed by filtration. NP formation was verified by dynamic light scattering and transmission electron microscopy, which revealed the presence of nano-sized particles with varying sizes and polydispersities as a function of the coffee type and oxidizing agent used. NP colors ranged from light to medium to dark brown, and particle sizes were between 44 and 250 nm with relatively low polydispersity indices. In vitro antioxidant assays showed that oxidizing agent-treated coffee NPs had lower antioxidant potency compared to air-oxidized NPs, but the free-radical scavenging activity was still retained. Coffee NPs exhibited no antimicrobial activity against common bacterial and fungal strains. Cell viability assays demonstrated that the NPs were biocompatible in human dermal fibroblasts, while exhibiting antiproliferative activity against MCF7 breast cancer cells, particularly copper sulfate-oxidized NPs. This study presents a facile and economical method to produce template-free antioxidant NPs that may be explored for various applications such as drug delivery and cosmetics.

Binding enhancements of antibody functionalized natural and synthetic fibers

Development of low cost biosensing using convenient and environmentally benign materials is important for wide adoption and ultimately improved healthcare and sustainable development. Immobilized antibodies are often incorporated as an essential biorecognition element in point-of-care biosensors but these proteins are costly. We present a strategy of combining convenient and low-cost surface functionalization approaches for increasing the overall binding activity of antibody functionalized natural and synthetic fibers. We demonstrate a simple one-step in situ silica NP growth protocol for increasing the surface area available for functionalization on cotton and polyester fabrics as well as on nanoporous cellulose substrates. Comparing this effect with the widely adopted and low cost plant-based polyphenol coating to enhance antibody immobilization, we find that both approaches can similarly increase overall surface activity, and we illustrate conditions under which the two approaches can produce an additive effect. Furthermore, we introduce co-immobilization of antibodies with a sacrificial “steric helper” protein for further enhancing surface activities. In combination, several hundred percent higher activities compared to physical adsorption can be achieved while maintaining a low amount of antibodies used, thus paving a practical path towards low cost biosensing.

Cotton, nanoporous cellulose and polyester fabric surfaces are functionalized with combinations of in situ grown silica NPs, polyphenol coating, and protein co-immobilization to enhance surface area, antibody binding efficiency, and biosensing.

Core-shell structured magnetic mesoporous carbon nanospheres derived from metal-polyphenol coordination polymer-coated Fe3 O4 and its application in the enrichment of phthalates from water samples

In this work, core-shell structured magnetic mesoporous carbon nanospheres were fabricated from the carbonization of metal-polyphenol coordination polymer-coated Fe₃ O₄ nanoparticles. The preparation method is simple, fast, versatile, and easy to scale up. Magnetic mesoporous carbon nanospheres exhibit a high specific surface area, high superparamagnetism, and high adsorption efficiencies for phthalates. Four phthalates were extracted from aqueous solutions by using magnetic mesoporous carbon nanospheres via magnetic solid phase extraction. Subsequent analysis was performed by using high-performance liquid chromatography with ultraviolet detection. The analytical method has good linearity in the concentration range of 1-200 ng/mL for diethyl phthalate, diisobutyl phthalate, and dicyclohexyl phthalate, and 3-200 ng/mL for dipropyl phthalate. The limits of detection were in the range of 0.10-0.62 ng/mL. Compared with previous methods, this method has a lower detection limit, wider linearity range, and faster adsorption and desorption rates. The results indicate that magnetic mesoporous carbon nanospheres are suitable for the enrichment of hydrophobic substances from aqueous solutions.