1
|
Polymer-enhanced perovskite oxide-based photocatalysts: a review. NANOSCALE 2023; 15:19039-19061. [PMID: 37987540 DOI: 10.1039/d3nr03874b] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 11/22/2023]
Abstract
Oxide perovskites (OPs) have emerged as promising photocatalysts for numerous applications, such as energy conversion, renewable fuels, and environmental remediation. Although OPs are gaining traction, their efficacies are still hindered by low charge carrier mobility and poor stability. This study investigated the function of polymers actively participating in OP structures to improve the overall characteristics. An overview of the polymer-enhanced perovskite oxide photocatalyst (PEPOP) field was effectively reviewed. These PEPOPs were demonstrated in photovoltaics, pollutant degradation, and gas conversion and reduction. Nonetheless, additional research is needed to explore the potential of PEPOPs to establish their efficacy in photocatalytic applications. The technological improvements of PEPOPs were hindered by significant challenges related to stability and sensitivity. The urgency of this review was apparent due to the fast-paced nature of research in the field of photocatalysis. Recent breakthroughs and emerging applications highlight the need for a comprehensive overview of PEPOPs and their enhanced catalytic capabilities. Consequently, a broad outlook was provided for the current state of PEPOP-related studies, highlighting the potential of these materials for future applications.
Collapse
|
2
|
Perovskite light-emitting diodes. NATURE ELECTRONICS 2022; 5:203-216. [DOI: 10.1038/s41928-022-00745-7] [Citation(s) in RCA: 54] [Impact Index Per Article: 27.0] [Reference Citation Analysis] [Track Full Text] [Subscribe] [Scholar Register] [Received: 03/16/2020] [Accepted: 03/02/2022] [Indexed: 09/02/2023]
|
3
|
|
4
|
Energy/Charge Transfer Modulation with Spacer Ligands for Highly Emissive Quantum Dot-Polymer Blend. ACS APPLIED MATERIALS & INTERFACES 2021; 13:21534-21543. [PMID: 33906350 DOI: 10.1021/acsami.1c03969] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/12/2023]
Abstract
A blend of perovskite quantum dots (QDs) and a hole transport layer (HTL) is a feasible candidate to solve the long-standing issues in light-emitting diodes (LEDs) such as charge injection, energy state matching, and defect passivation. However, QD:HTL blend structures for QD-based LEDs suffer from fast charge and energy transfers due to an inhomogeneous distribution of QDs and the HTL matrix. Here we report new cross-linkable spacer ligands between QDs and TFB that result in a highly emissive QD:TFB-blended LED device. We synthesize three representative spacer ligands to control the charge and energy transfers between QDs and the HTL. The first spacer ligand is used for controlling the molecular distance between QDs and TFB, and the second spacer ligand is designed to investigate how molecular interaction between QDs and the spacer ligand affects the optical property of the QD:TFB blend. Subsequently, the best spacer ligand, a 10-((2-benzoylbenzoyl)oxy)decanoic acid, is designed to anchor TFB (via a benzophenone group) and simultaneously bond to QDs (with a carboxylic acid functional group). The carboxylic acid group strongly interacts with QDs, dramatically improving the cross-linking rate between QDs and TFB. Due to the direct interaction between QDs and TFB, hole carriers can be effectively injected to perovskite QDs through the conductive backbone of TFB, resulting in the highest luminance values of 10917 cd/m2 at 7.4 V due to carrier injection balance. This is at least 10 times better LED performance compared with a pristine QD device.
Collapse
|
5
|
Nanoscale Architecture of Polymer-Organolead Halide Perovskite Films and the Effect of Polymer Chain Mobility on Device Performance. J Phys Chem Lett 2021; 12:1481-1489. [PMID: 33533616 DOI: 10.1021/acs.jpclett.1c00004] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 06/12/2023]
Abstract
The integration of polymer chains with organolead halide perovskite (MAPbI3) films, leading to enhanced stability and electro-optical performance, is critically affected by the molecular weight of chains. The molecular weight determines the mobility and volume of the chains, which affects the crystallization kinetics and, hence, perovskite grain size. The insulating nature of the chains is another critical factor that affects both ion migration and conduction of electronic charge. The combined effect of these factors leads to optimal performance with the use of medium-length chains. A simple model integrating the two effects accurately fits the response of the polymer-perovskite composite. Further characterization results show that the polymer-perovskite films have a three-layer architecture consisting of nanoscale polymer-rich top and bottom layers. These combined results show that the optimization of performance in polymer-perovskite devices depends critically on the size of the chains due to their multiple effects on the perovskite matrix.
Collapse
|
6
|
Ruddlesden-Popper-Phase Hybrid Halide Perovskite/Small-Molecule Organic Blend Memory Transistors. ADVANCED MATERIALS (DEERFIELD BEACH, FLA.) 2021; 33:e2003137. [PMID: 33382153 DOI: 10.1002/adma.202003137] [Citation(s) in RCA: 10] [Impact Index Per Article: 3.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 05/09/2020] [Revised: 09/29/2020] [Indexed: 06/12/2023]
Abstract
Controlling the morphology of metal halide perovskite layers during processing is critical for the manufacturing of optoelectronics. Here, a strategy to control the microstructure of solution-processed layered Ruddlesden-Popper-phase perovskite films based on phenethylammonium lead bromide ((PEA)2 PbBr4 ) is reported. The method relies on the addition of the organic semiconductor 2,7-dioctyl[1]benzothieno[3,2-b]benzothiophene (C8 -BTBT) into the perovskite formulation, where it facilitates the formation of large, near-single-crystalline-quality platelet-like (PEA)2 PbBr4 domains overlaid by a ≈5-nm-thin C8 -BTBT layer. Transistors with (PEA)2 PbBr4 /C8 -BTBT channels exhibit an unexpectedly large hysteresis window between forward and return bias sweeps. Material and device analysis combined with theoretical calculations suggest that the C8 -BTBT-rich phase acts as the hole-transporting channel, while the quantum wells in (PEA)2 PbBr4 act as the charge storage element where carriers from the channel are injected, stored, or extracted via tunneling. When tested as a non-volatile memory, the devices exhibit a record memory window (>180 V), a high erase/write channel current ratio (104 ), good data retention, and high endurance (>104 cycles). The results here highlight a new memory device concept for application in large-area electronics, while the growth technique can potentially be exploited for the development of other optoelectronic devices including solar cells, photodetectors, and light-emitting diodes.
Collapse
|
7
|
Interfacial engineering with conjugated polyelectrolyte for high performance 2D perovskite solar cells. Chem Phys Lett 2020. [DOI: 10.1016/j.cplett.2020.138063] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/26/2022]
|
8
|
New Insights into the Structure of Glycols and Derivatives: A Comparative X-Ray Diffraction, Raman and Molecular Dynamics Study of Ethane-1,2-Diol, 2-Methoxyethan-1-ol and 1,2-Dimethoxy Ethane. CRYSTALS 2020. [DOI: 10.3390/cryst10111011] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 01/08/2023]
Abstract
In this study, we report a detailed experimental and theoretical investigation of three glycol derivatives, namely ethane-1,2-diol, 2-methoxyethan-1-ol and 1,2-dimethoxy ethane. For the first time, the X-ray spectra of the latter two liquids was measured at room temperature, and they were compared with the newly measured spectrum of ethane-1,2-diol. The experimental diffraction patterns were interpreted very satisfactorily with molecular dynamics calculations, and suggest that in liquid ethane-1,2-diol most molecules are found in gauche conformation, with intramolecular hydrogen bonds between the two hydroxyl groups. Intramolecular H-bonds are established in the mono-alkylated diol, but the interaction is weaker. The EDXD study also evidences strong intermolecular hydrogen-bond interactions, with short O···O correlations in both systems, while longer methyl-methyl interactions are found in 1,2-dimethoxy ethane. X-ray studies are complemented by micro Raman investigations at room temperature and at 80 °C, that confirm the conformational analysis predicted by X-ray experiments and simulations.
Collapse
|
9
|
Enhanced Efficiency of Air-Stable CsPbBr 3 Perovskite Solar Cells by Defect Dual Passivation and Grain Size Enlargement with a Multifunctional Additive. ACS APPLIED MATERIALS & INTERFACES 2020; 12:36092-36101. [PMID: 32663398 DOI: 10.1021/acsami.0c08827] [Citation(s) in RCA: 4] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/11/2023]
Abstract
The perovskite solar cells (PSCs) based on cesium lead bromide (CsPbBr3) with outstanding environmental stability and low preparation cost are regarded as one of the most promising photovoltaic devices for commercial applications. However, the performance of CsPbBr3 PSCs can be badly deteriorated by the intense charge recombination arising from the ionic defects at the grain boundaries of perovskite film. To cope with this issue, we adopt an amino acid of l-lysine with two amino and one carboxyl groups as a chemical additive to incorporate into perovskite film to simultaneously anchor the uncoordinated Pb2+ (Cs+) and halogen ion defects. Further, the grain size of CsPbBr3 perovskite is boosted from 688 to over 1000 nm after l-lysine incorporation as a result of the decreased nucleation rate and the sufficient growth of perovskite, which effectively reduce the grain boundaries for load defects. As expected, the optimized device achieves a best power conversion efficiency of 9.69% attributed to the remarkably reduced charge recombination and enhanced charge extraction arising from the efficient defects dual-passivation and enlarged grain size of perovskite film as well as the improved energy level alignment at the device interface after the introduction of l-lysine, which is elevated by 61.23% in comparison to 6.01% efficiency of the pristine one. Moreover, the unencapsulated device with l-lysine incorporation exhibits remarkable long-term stability in air with 80% RH at 25 °C and 0% RH at 80 °C as well as under continuous illumination conditions. This work provides an effective multifunctional additive for imperfection passivation and grain size enlargement of perovskite to build PSCs with high efficiency and stability.
Collapse
|
10
|
Micro- and Nanopatterning of Halide Perovskites Where Crystal Engineering for Emerging Photoelectronics Meets Integrated Device Array Technology. ADVANCED MATERIALS (DEERFIELD BEACH, FLA.) 2020; 32:e2000597. [PMID: 32530144 DOI: 10.1002/adma.202000597] [Citation(s) in RCA: 32] [Impact Index Per Article: 8.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 01/27/2020] [Revised: 03/04/2020] [Accepted: 03/11/2020] [Indexed: 05/25/2023]
Abstract
Tremendous efforts have been devoted to developing thin film halide perovskites (HPs) for use in high-performance photoelectronic devices, including solar cells, displays, and photodetectors. Furthermore, structured HPs with periodic micro- or nanopatterns have recently attracted significant interest due to their potential to not only improve the efficiency of an individual device via the controlled arrangement of HP crystals into a confined geometry, but also to technologically pixelate the device into arrays suitable for future commercialization. However, micro- or nanopatterning of HPs is not usually compatible with conventional photolithography, which is detrimental to ionic HPs and requires special techniques. Herein, a comprehensive overview of the state-of-the-art technologies used to develop micro- and nanometer-scale HP patterns, with an emphasis on their controlled microstructures based on top-down and bottom-up approaches, and their potential for future applications, is provided. Top-down approaches include modified conventional lithographic techniques and soft-lithographic methods, while bottom-up approaches include template-assisted patterning of HPs based on lithographically defined prepatterns and self-assembly. HP patterning is shown here to not only improve device performance, but also to reveal the unprecedented functionality of HPs, leading to new research areas that utilize their novel photophysical properties.
Collapse
|
11
|
Anti-Oxidizing Radical Polymer-Incorporated Perovskite Layers and their Photovoltaic Characteristics in Solar Cells. CHEMSUSCHEM 2019; 12:5207-5212. [PMID: 31625275 DOI: 10.1002/cssc.201901601] [Citation(s) in RCA: 5] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 06/14/2019] [Revised: 09/27/2019] [Indexed: 06/10/2023]
Abstract
A small amount of a radical-bearing redox-active polymer, poly(1-oxy-2,2,6,6-tetramethylpiperidin-4-yl methacrylate) (PTMA), incorporated into the photovoltaic organo-lead halide perovskite layer significantly enhanced durability of both the perovskite layer and its solar cell and even exposure to ambient air or oxygen. PTMA acted as an eliminating agent of the superoxide anion radical formed upon light irradiation on the layer, which can react with the perovskite compound and decompose it to lead halide. A cell fabricated with a PTMA-incorporated perovskite layer and a hole-transporting polytriarylamine layer gave a photovoltaic conversion efficiency of 18.8 % (18.2 % for the control without PTMA). The photovoltaic current was not reduced in the presence of PTMA in the perovskite layer probably owing to a carrier conductivity of PTMA. The incorporated PTMA also worked as a water-repelling coating for providing humidity-resistance to the organo-lead halide perovskite layer.
Collapse
|
12
|
Influence of Poly(Vinylidene fluoride) on photovoltaic performance of interfacially engineered band gap modulated P3TAA-co-P3HT perovskite solar cell at ambient condition. POLYMER 2019. [DOI: 10.1016/j.polymer.2019.121973] [Citation(s) in RCA: 4] [Impact Index Per Article: 0.8] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/20/2022]
|
13
|
Titanium-carbide MXenes for work function and interface engineering in perovskite solar cells. NATURE MATERIALS 2019; 18:1264. [PMID: 31501556 DOI: 10.1038/s41563-019-0527-9] [Citation(s) in RCA: 4] [Impact Index Per Article: 0.8] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Received: 04/01/2019] [Accepted: 08/07/2019] [Indexed: 05/25/2023]
Abstract
To improve the efficiency of perovskite solar cells, careful device design and tailored interface engineering are needed to enhance optoelectronic properties and the charge extraction process at the selective electrodes. Here, we use two-dimensional transition metal carbides (MXene Ti3C2Tx) with various termination groups (Tx) to tune the work function (WF) of the perovskite absorber and the TiO2 electron transport layer (ETL), and to engineer the perovskite/ETL interface. Ultraviolet photoemission spectroscopy measurements and density functional theory calculations show that the addition of Ti3C2Tx to halide perovskite and TiO2 layers permits the tuning of the materials' WFs without affecting other electronic properties. Moreover, the dipole induced by the Ti3C2Tx at the perovskite/ETL interface can be used to change the band alignment between these layers. The combined action of WF tuning and interface engineering can lead to substantial performance improvements in MXene-modified perovskite solar cells, as shown by the 26% increase of power conversion efficiency and hysteresis reduction with respect to reference cells without MXene.
Collapse
|
14
|
Titanium-carbide MXenes for work function and interface engineering in perovskite solar cells. NATURE MATERIALS 2019; 18:1228-1234. [PMID: 31501556 DOI: 10.1038/s41563-019-0478-1] [Citation(s) in RCA: 140] [Impact Index Per Article: 28.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Received: 04/01/2019] [Accepted: 08/07/2019] [Indexed: 06/10/2023]
Abstract
To improve the efficiency of perovskite solar cells, careful device design and tailored interface engineering are needed to enhance optoelectronic properties and the charge extraction process at the selective electrodes. Here, we use two-dimensional transition metal carbides (MXene Ti3C2Tx) with various termination groups (Tx) to tune the work function (WF) of the perovskite absorber and the TiO2 electron transport layer (ETL), and to engineer the perovskite/ETL interface. Ultraviolet photoemission spectroscopy measurements and density functional theory calculations show that the addition of Ti3C2Tx to halide perovskite and TiO2 layers permits the tuning of the materials' WFs without affecting other electronic properties. Moreover, the dipole induced by the Ti3C2Tx at the perovskite/ETL interface can be used to change the band alignment between these layers. The combined action of WF tuning and interface engineering can lead to substantial performance improvements in MXene-modified perovskite solar cells, as shown by the 26% increase of power conversion efficiency and hysteresis reduction with respect to reference cells without MXene.
Collapse
|
15
|
Inorganic and Layered Perovskites for Optoelectronic Devices. ADVANCED MATERIALS (DEERFIELD BEACH, FLA.) 2019; 31:e1807095. [PMID: 31012172 DOI: 10.1002/adma.201807095] [Citation(s) in RCA: 11] [Impact Index Per Article: 2.2] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 11/02/2018] [Revised: 02/22/2019] [Indexed: 05/25/2023]
Abstract
Organic-inorganic halide perovskites are making breakthroughs in a range of optoelectronic devices. Reports of >23% certified power conversion efficiency in photovoltaic devices, external quantum efficiency >21% in light-emitting diodes (LEDs), continuous-wave lasing and ultralow lasing thresholds in optically pumped lasers, and detectivity in photodetectors on a par with commercial GaAs rivals are being witnessed, making them the fastest ever emerging material technology. Still, questions on their toxicity and long-term stability raise concerns toward their market entry. The intrinsic instability in these materials arises due to the organic cation, typically the volatile methylamine (MA), which contributes to hysteresis in the current-voltage characteristics and ion migration. Alternative inorganic substitutes to MA, such as cesium, and large organic cations that lead to a layered structure, enhance structural as well as device operational stability. These perovskites also provide a high exciton binding energy that is a prerequisite to enhance radiative emission yield in LEDs. The incorporation of inorganic and layered perovskites, in the form of polycrystalline films or as single-crystalline nanostructure morphologies, is now leading to the demonstration of stable devices with excellent performance parameters. Herein, key developments made in various optoelectronic devices using these perovskites are summarized and an outlook toward stable yet efficient devices is presented.
Collapse
|
16
|
PbS quantum dots as additives in methylammonium halide perovskite solar cells: the effect of quantum dot capping. NANOSCALE ADVANCES 2019; 1:4109-4118. [PMID: 36132121 PMCID: PMC9417732 DOI: 10.1039/c9na00475k] [Citation(s) in RCA: 6] [Impact Index Per Article: 1.2] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 08/02/2019] [Accepted: 09/10/2019] [Indexed: 05/31/2023]
Abstract
Colloidal PbS quantum dots (QDs) have been successfully employed as additives in halide perovskite solar cells (PSCs) acting as nucleation centers in the perovskite crystallization process. For this strategy, the surface functionalization of the QDs, controlled via the use of different capping ligands, is likely of key importance. In this work, we examine the influence of the PbS QD capping on the photovoltaic performance of methylammonium lead iodide PSCs. We test PSCs fabricated with PbS QD additives with different capping ligands including methylammonium lead iodide (MAPI), cesium lead iodide (CsPI) and 4-aminobenzoic acid (ABA). Both the presence of PbS QDs and the specific capping used have a significant effect on the properties of the deposited perovskite layer, which affects, in turn, the photovoltaic performance. For all capping ligands used, the inclusion of PbS QDs leads to the formation of perovskite films with larger grain size, improving, in addition, the crystalline preferential orientation and the crystallinity. Yet, differences between the capping agents were observed. The use of QDs with ABA capping had a higher impact on the morphological properties while the employment of the CsPI ligand was more effective in improving the optical properties of the perovskite films. Taking advantage of the improved properties, PSCs based on the perovskite films with embedded PbS QDs exhibit an enhanced photovoltaic performance, showing the highest increase with ABA capping. Moreover, bulk recombination via trap states is reduced when the ABA ligand is used for capping of the PbS QD additives in the perovskite film. We demonstrate how surface chemistry engineering of PbS QD additives in solution-processed perovskite films opens a new approach towards the design of high quality materials, paving the way to improved optoelectronic properties and more efficient photovoltaic devices.
Collapse
|
17
|
Dual Functional Molecular Imprinted Polymer-Modified Organometal Lead Halide Perovskite: Synthesis and Application for Photoelectrochemical Sensing of Salicylic Acid. Anal Chem 2019; 91:9356-9360. [DOI: 10.1021/acs.analchem.9b01739] [Citation(s) in RCA: 48] [Impact Index Per Article: 9.6] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/15/2022]
|