Pd-Catalyzed Reaction-Producing Intermediate S on a Pd/In2O3 Surface: A Key To Achieve the Enhanced CS2-Sensing Performances

Kinetic Modelling and Machine Learning Approaches on the Conductance Transients of Zn0.5Ni0.5Fe2O4 Sensors for Addressing Cross-sensitivity towards Ethanol and Acetone Vapors

The accurate discrimination among various volatile organic compounds, especially ethanol and acetone possess a serious concern for metal oxide based chemiresistive sensors. The work presents a systematic approach to address the issue by utilizing superior sensing potentiality of Zn0.5Ni0.5Fe2O4 coupled with efficient machine learning (ML) techniques. The work provides a thorough understanding on the synthesis, characterization of Zn0.5Ni0.5Fe2O4 nanoparticles and evaluates their sensing performance towards ethanol and acetone vapors. The optimized sensor performance recorded under varying concentrations (100-1000 ppm) of analytes across the range of temperature (225-300 °C) provides lesser selectivity between acetone and ethanol. The Langmuir-Hinshelwood reaction mechanism was invoked further to address the selectivity issue by modelling the response transients of the sensor to get an insight into sensing interaction at a microscopic level. The estimated activation energy values of ethanol (0.26 eV) have been found to be smaller compared to that of acetone (0.34 eV), explaining little higher response of the sensor towards ethanol. Moreover, some efficient ML algorithms were employed to predictively analyze the acquired sensing data for achieving more precise discriminations between these two analytes.

Recent progress of cataluminescence sensing based on gas-solid interfaces

Cataluminescence (CTL) has emerged as a sensing transduction principle of gas-solid interface for constructing gas sensors that present fast response, high sensitivity, and online monitoring. It has thus been widely associated with the field of chemical analysis and catalytic science. Herein, the latest developments in CTL sensors are reviewed, and the status quo of CTL-based gas sensing systems is discussed. In particular, the basic principles and sensing systems of CTL are outlined, including performance enhancement strategies for specific targets and recognition methods for multiple targets. Moreover, the important applications of CTL sensors are listed and classified, including environmental pollutant monitoring, product quality control, clinical diagnosis, and evaluation of catalyst performance. Finally, based on abundant case reports, the current conundrums of CTL sensors are summarized and their future development trends are also put forward.

Advances in Noble Metal-Decorated Metal Oxide Nanomaterials for Chemiresistive Gas Sensors: Overview

Highly sensitive gas sensors with remarkably low detection limits are attractive for diverse practical application fields including real-time environmental monitoring, exhaled breath diagnosis, and food freshness analysis. Among various chemiresistive sensing materials, noble metal-decorated semiconducting metal oxides (SMOs) have currently aroused extensive attention by virtue of the unique electronic and catalytic properties of noble metals. This review highlights the research progress on the designs and applications of different noble metal-decorated SMOs with diverse nanostructures (e.g., nanoparticles, nanowires, nanorods, nanosheets, nanoflowers, and microspheres) for high-performance gas sensors with higher response, faster response/recovery speed, lower operating temperature, and ultra-low detection limits. The key topics include Pt, Pd, Au, other noble metals (e.g., Ag, Ru, and Rh.), and bimetals-decorated SMOs containing ZnO, SnO2, WO3, other SMOs (e.g., In2O3, Fe2O3, and CuO), and heterostructured SMOs. In addition to conventional devices, the innovative applications like photo-assisted room temperature gas sensors and mechanically flexible smart wearable devices are also discussed. Moreover, the relevant mechanisms for the sensing performance improvement caused by noble metal decoration, including the electronic sensitization effect and the chemical sensitization effect, have also been summarized in detail. Finally, major challenges and future perspectives towards noble metal-decorated SMOs-based chemiresistive gas sensors are proposed.

Review on recent progress in on-line monitoring technology for atmospheric pollution source emissions in China

Emissions from mobile sources and stationary sources contribute to atmospheric pollution in China, and its components, which include ultrafine particles (UFPs), volatile organic compounds (VOCs), and other reactive gases, such as NH₃ and NO_x, are the most harmful to human health. China has released various regulations and standards to address pollution from mobile and stationary sources. Thus, it is urgent to develop online monitoring technology for atmospheric pollution source emissions. This study provides an overview of the main progress in mobile and stationary source monitoring technology in China and describes the comprehensive application of some typical instruments in vital areas in recent years. These instruments have been applied to monitor emissions from motor vehicles, ships, airports, the chemical industry, and electric power generation. Not only has the level of atmospheric environment monitoring technology and equipment been improving, but relevant regulations and standards have also been constantly updated. Meanwhile, the developed instruments can provide scientific assistance for the successful implementation of regulations. According to the potential problem areas in atmospheric pollution in China, some research hotspots and future trends of atmospheric online monitoring technology are summarized. Furthermore, more advanced atmospheric online monitoring technology will contribute to a comprehensive understanding of atmospheric pollution and improve environmental monitoring capacity.

The Dehydrogenation of H-S Bond into Sulfur Species on Supported Pd Single Atoms Allows Highly Selective and Sensitive Hydrogen Sulfide Detection

The supported metal catalysts on scaffolds usually reveal multiple active sites, resulting in the occurrence of side reaction and being detrimental to the achievement of highly consistent catalysis. Single atom catalysts (SACs), possessed with highly consistent single active sites, have great potentials for overcoming such issues. Herein, the authors used SACs to modulate kinetic process of gas sensitive reaction. The supported Pd SACs, established by a metal organic frameworks-templated approach, promoted greatly the detection capacity to hydrogen sulfide (H₂ S) gas with a very high sensitivity and selectivity. Density functional theory calculations show that the supported Pd SACs not only increased the number of electrons transferring from H₂ S molecules to Pd SACs, but strengthened surface affinity to H₂ S. Moreover, the HS bonds of H₂ S molecules absorbed on Pd atomic sites are more likely to be dehydrogenated directly into sulfur species. Significantly, quasi in situ XPS analysis confirmed the presence of sulfur species during H₂ S detection process, which may be a major cause for such detection signal. Based on these results, a suitable sensing principle for H₂ S gas driven by Pd SACs was put forward. This work will enrich catalytic electronics in chemiresistive gas sensing.

The effect of different crystalline phases of In2O3 on the ozone sensing performance

Crystalline phase regulation could optimize the band gap, which has a great impact on the amount of chemisorbed gas molecules on the gas sensing materials. Herein, a facile route of hydrothermal method followed by calcination treatment was used to synthesize cubic bixbyite-type (C-In₂O₃), rhombohedral corundum-type (Rh-In₂O₃) and the mixed phase In₂O₃ (Rh+C-In₂O₃). The band gap of C-In₂O₃ was narrowed to a suitable value (2.38 eV) and the relative percentage of chemisorbed oxygen was enhanced (31.8%). The sensing results to ozone (O₃) indicated that the C-type structure stood out. The gas sensor based on C-In₂O₃ exhibited extraordinary O₃ sensing performances with a response of 5.7 (100 ppb) and an ultralow limit of detection of 30 ppb. The amazing results could be attributed to the narrow band gap and the enrichment of chemisorbed oxygen. This work inspires a new perspective to design highly sensitive and reliable O₃ sensors.

MOFs-Derived Fusiform In2 O3 Mesoporous Nanorods Anchored with Ultrafine CdZnS Nanoparticles for Boosting Visible-Light Photocatalytic Hydrogen Evolution

The development of efficient visible-light-driven photocatalysts is one of the critically important issues for solar hydrogen production. Herein, high-efficiency visible-light-driven In₂ O₃ /CdZnS hybrid photocatalysts are explored by a facile oil-bath method, in which ultrafine CdZnS nanoparticles are anchored on NH₂ -MIL-68-derived fusiform In₂ O₃ mesoporous nanorods. It is disclosed that the as-prepared In₂ O₃ /CdZnS hybrid photocatalysts exhibit enhanced visible-light harvesting, improves charges transfer and separation as well as abundant active sites. Correspondingly, their visible-light-driven H₂ production rate is significantly enhanced for more than 185 times to that of pristine In₂ O₃ nanorods, and superior to most of In₂ O₃ -based photocatalysts ever reported, representing their promising applications in advanced photocatalysts.

Novel Strategy for Engineering the Metal-Oxide@MOF Core@Shell Architecture and Its Applications in Cataluminescence Sensing

Cataluminescence is an attractive oxydic luminescence on the gas-solid interface, and metal-oxide@MOF core@shell architectures show great potential for cataluminescence sensing due to their integrated synergistic effect from core and shell components. However, restricting the direct nucleation and growth of metal-organic frameworks (MOFs) on the topologically distinct surface of metal oxides is a great challenge, owing to the high interface energy from the topology mismatch. Herein, for the first time, a novel liquid-phase concentration-controlled nucleation strategy is exploited to induce the direct assembly of a ZIF-8 layer on the surface of CeO₂ nanospheres without any sacrificial templates or further surface modifications. The results show that the construction of the CeO₂@ZIF-8 core@shell architecture can be accomplished within 1 min under the mediation of boosted nucleation kinetics. Furthermore, the universality of this developed strategy is demonstrated by the encapsulation of other metal-oxide cores such as magnetic Fe₃O₄ and ZnCo₂O₄ core particles with a ZIF-8 shell. Notably, compared to the pure CeO₂ and ZIF-8, the obtained CeO₂@ZIF-8 nanocomposite exhibits enhanced analytical performance for the cataluminescence sensing of propanal, in which the shell acts as the major catalytic reaction center, while the core contributes to further improving the catalytic efficiency. The proposed facile synthesis strategy with excellent simplicity, rapidity, and universality brings new insights into the engineering of core@shell advanced functional materials with mismatched topologies for catering to the diverse application demands.

Finite Element Modelling of Bandgap Engineered Graphene FET with the Application in Sensing Methanethiol Biomarker

In this work, we have designed and simulated a graphene field effect transistor (GFET) with the purpose of developing a sensitive biosensor for methanethiol, a biomarker for bacterial infections. The surface of a graphene layer is functionalized by manipulation of its surface structure and is used as the channel of the GFET. Two methods, doping the crystal structure of graphene and decorating the surface by transition metals (TMs), are utilized to change the electrical properties of the graphene layers to make them suitable as a channel of the GFET. The techniques also change the surface chemistry of the graphene, enhancing its adsorption characteristics and making binding between graphene and biomarker possible. All the physical parameters are calculated for various variants of graphene in the absence and presence of the biomarker using counterpoise energy-corrected density functional theory (DFT). The device was modelled using COMSOL Multiphysics. Our studies show that the sensitivity of the device is affected by structural parameters of the device, the electrical properties of the graphene, and with adsorption of the biomarker. It was found that the devices made of graphene layers decorated with TM show higher sensitivities toward detecting the biomarker compared with those made by doped graphene layers.

Atomically Dispersed Au on In2O3 Nanosheets for Highly Sensitive and Selective Detection of Formaldehyde

As an important industrial chemical, formaldehyde is used in various fields but is harmful to health. Developing a convenient detection device for formaldehyde is significant. Based on atomically dispersed Au on In₂O₃ nanosheets, a formaldehyde sensor was fabricated in this work. The highly dispersed Au obtained by the ultraviolet (UV) light-assisted reduction method helps improve the sensing performance. A meager loading amount (0.01 wt %) of Au on In₂O₃ nanosheets exhibits high sensitivity toward ppb-level formaldehyde. Au acts as an electron sink and promotes the oxidation of formaldehyde. Atomically dispersed Au on In₂O₃ nanosheets decreases the activation energy and increases the number of active sites, which result in a highly efficient conversion of formaldehyde and a marked resistance change of the fabricated sensors. The selective adsorption and oxidation of formaldehyde on single atom Au's uniform sites establish excellent selectivity. Besides, the sensor exhibits short response/recovery time and excellent stability, with promising applications in formaldehyde detection.

Au-Decorated ZnFe2O4 Yolk-Shell Spheres for Trace Sensing of Chlorobenzene

Noble metals supported on metal oxides are promising materials for widely applying on gas sensors because of their enviable physical and chemical properties in enhancing the sensitivity and selectivity. Herein, pristine ZFO yolk-shell spheres composed of ultrathin nanosheets and ultrasmall nanoparticles decorated with nanosized Au particles with a diameter of 1-2 nm are fabricated using the method of solution-phase deposition-precipitation. As a result, the Au@ZFO yolk-shell sphere based sensor exhibits significantly sensing performances for chlorobenzene (CB). In comparison with pristine ZFO, the response (R_air/R_gas= 90.9) of a Au@ZFO based sensor with a low detection limit of 100 ppb increases 4-fold when exposed to 10 ppm chlorobezene at 150 °C. Excitingly, the sensing response for chlorobenzene is the highest among metal oxides semiconductor based sensors. Moreover, the sensors can be further applied in the field of chlorobenzene monitoring, owing to its outstanding selectivity. The results elaborated that the enhanced sensing mechanism is mainly attributed to the effects of electronic sensitization and chemical sensitization, which are induced by the Au nanoparticles on the surface of ZFO yolk-shell spheres. Density functional theory (DFT) calculations further illustrated that the existence of Au nanoparticles exhibits higher adsorption energy and net charge transfer for CB. In addition, the relationship between the sensing performances of pristine ZFO and Au@ZFO yolk-shell spheres for chlorobenzene and the factors of Au loading amount, operating temperature, and humidity was also fully investigated in this work.

Improved SERS activity of non-stoichiometric copper sulfide nanostructures related to charge-transfer resonance

The low enhancement factor of semiconductor SERS substrates is a major obstacle for their practical application. Therefore, there is a need to explore the facile synthesis of new SERS substrates and reveal the SERS enhancement mechanism. Here, we develop a simple, facile and low-cost two-step method to synthesize copper sulfide based nanostructures with different Cu_7.2S₄ contents. The as-synthesized sample is composed of nanosheets with the CuS phase structure. With the increase of the annealing temperature to 300 °C, the CuS content gradually decreases and disappears, and the content of Cu_7.2S₄ and CuSO₄ appears and gradually increases. At the annealing temperature of 350 °C, only CuSO₄ exists. Compared with pure CuS or pure CuSO₄, the detection limit of R6G molecules is the lowest for the composite sample with a higher content of Cu_7.2S₄, indicating that the introduction of non-stoichiometric Cu_7.2S₄ can improve the SERS performance and the higher content of Cu_7.2S₄ leads to a higher SERS activity. Furthermore, to investigate the SERS mechanism, the energy band structures and energy-level diagrams of different probe molecules over CuS, Cu_7.2S₄ and Cu_xS are studied by DFT calculations. Theoretical calculations indicate that the excellent SERS behavior depends on charge transfer resonance. Our work provides a general approach for the construction of excellent metal compound semiconductor SERS active substrates.

Gas sensing mechanisms of metal oxide semiconductors: a focus review

In recent years, gas sensors have been increasingly used in industrial production and daily life. Metal oxide semiconductor gas sensing materials are favoured for their outstanding physical and chemical properties, low cost and simple preparation methods. However, the gas sensing mechanisms of metal oxide semiconductors have not been considered by researchers, resulting in omissions and errors in the interpretation of gas sensing mechanisms in many articles. This review organizes and introduces several common gas sensing mechanisms of metal oxide semiconductors in detail and classifies them into two categories. The scope and relationship of these mechanisms are clarified. In addition, this review selects four strategies for enhancing the gas sensing properties of metal oxide semiconductors and analyses the gas sensing mechanisms to highlight the importance of the gas sensing mechanism. Finally, some perspectives for future investigations on the gas sensing mechanisms of metal oxide semiconductors are discussed as well.

Ag Nanoparticles Sensitized In2O3 Nanograin for the Ultrasensitive HCHO Detection at Room Temperature

Formaldehyde (HCHO) is the main source of indoor air pollutant. HCHO sensors are therefore of paramount importance for timely detection in daily life. However, existing sensors do not meet the stringent performance targets, while deactivation due to sensing detection at room temperature, for example, at extremely low concentration of formaldehyde (especially lower than 0.08 ppm), is a widely unsolved problem. Herein, we present the Ag nanoparticles (Ag NPs) sensitized dispersed In₂O₃ nanograin via a low-fabrication-cost hydrothermal strategy, where the Ag NPs reduces the apparent activation energy for HCHO transporting into and out of the In₂O₃ nanoparticles, while low concentrations detection at low working temperature is realized. The pristine In₂O₃ exhibits a sluggish response (R_a/R_g = 4.14 to 10 ppm) with incomplete recovery to HCHO gas. After Ag functionalization, the 5%Ag-In₂O₃ sensor shows a dramatically enhanced response (135) with a short response time (102 s) and recovery time (157 s) to 1 ppm HCHO gas at 30 °C, which benefits from the Ag NPs that electronically and chemically sensitize the crystal In₂O₃ nanograin, greatly enhancing the selectivity and sensitivity.