1
|
Dynamically Evolving Multifunctional Protective Layer for Highly Stable Potassium Metal Anodes. ACS APPLIED MATERIALS & INTERFACES 2023; 15:58429-58436. [PMID: 38079626 DOI: 10.1021/acsami.3c14009] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 12/22/2023]
Abstract
The construction of an artificial protective layer is an effective method to solve the issues, such as uncontrolled dendrite growth and an unstable solid electrolyte interphase, at the K metal anode. This study proposes a new dynamic evolution strategy that integrates the advantages of previous in situ and ex situ fabrication processes. A multifunctional protective layer enriched with K-Ge alloy is prepared on the K metal electrode by simple surface modification and in situ reduction via an electrochemical process. The protective layer has good potassiophilicity, mechanical flexibility, and high ionic conductivity, which can inhibit dendrite growth and reduce side reactions. The protected K electrode with a protective layer exhibits dendrite-free K plating/striping behavior, and the symmetric cell can run stably for over 1000 h at 1 mA cm-2 and 1 mAh cm-2. Notably, full cells based on this electrode also present excellent rate and cycling performance compared to those of the bare K electrode. This peculiar strategy will open a new avenue for metal anode protection and can be extended to other high-energy battery systems.
Collapse
|
2
|
Ultrastable Dendrite-Free Potassium Metal Batteries Enabled by Weakly-Solvated Electrolyte. ACS NANO 2023; 17:20325-20333. [PMID: 37830495 DOI: 10.1021/acsnano.3c06368] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 10/14/2023]
Abstract
Potassium (K) metal is considered one of the most promising anodes for potassium metal batteries (PMBs) because of its abundant and low-cost advantages but suffers from serious dendritic growth and parasitic reactions, resulting in poor cyclability, low Coulombic efficiency (CE), and safety concerns. In this work, we report a localized high-concentration electrolyte (LHCE) consisting of potassium bis(fluorosulfonyl)imide (KFSI) in a cosolvent of 1,2-dimethoxyethane (DME) and 1,1,2,2,2-tetrafluoroethyl-2,2,3,3-tetrafluoropropyl ether (TTE) to solve the problems of PMBs. TTE as a diluent not only endows LHCE with advantages of low viscosity, good wettability, and improved conductivity but also solves the dendrite problem pertaining to K metal anodes. Using the formulation of LHCE, a CE of 98% during 800 cycles in the K||Cu cell and extremely stable cycling of over 2000 h in the K||K symmetric cell are achieved at a current density of 0.1 mA cm-2. In addition, the LHCE shows good compatibility with a Prussian Blue cathode, allowing almost 99% CE for the K||KFeIIFeIII(CN)6 full cell during 100 cycles. This promising electrolyte design realizes high-safety and energy-dense PMBs.
Collapse
|
3
|
Polyolefin-Based Separator with Interfacial Chemistry Regulation for Robust Potassium Metal Batteries. Angew Chem Int Ed Engl 2023; 62:e202306325. [PMID: 37401361 DOI: 10.1002/anie.202306325] [Citation(s) in RCA: 2] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/05/2023] [Revised: 07/02/2023] [Accepted: 07/03/2023] [Indexed: 07/05/2023]
Abstract
Potassium metal batteries (KMBs) are ideal choices for high energy density storage system owing to the low electrochemical potential and low cost of K. However, the practical KMB applications suffer from intrinsically active K anode, which would bring serious safety concerns due to easier generation of dendrites. Herein, to explore a facile approach to tackle this issue, we propose to regulate K plating/stripping via interfacial chemistry engineering of commercial polyolefin-based separator using multiple functional units integrated in tailored metal organic framework. As a case study, the functional units of MIL-101(Cr) offer high elastic modulus, facilitate the dissociation of potassium salt, improve the K+ transfer number and homogenize the K+ flux at the electrode/electrolyte interface. Benefiting from these favorable features, uniform and stable K plating/stripping is realized with the regulated separator. Full battery assembled with the regulated separator showed ∼19.9 % higher discharge capacity than that with glass fiber separator at 20 mA g-1 and much better cycling stability at high rates. The generality of our approach is validated with KMBs using different cathodes and electrolytes. We envision that the strategy to suppress dendrite formation by commercial separator surface engineering using tailor-designed functional units can be extended to other metal/metal ion batteries.
Collapse
|
4
|
Bifunctional Alloy/Solid-Electrolyte Interphase Layer for Enhanced Potassium Metal Batteries Via Prepassivation. ACS NANO 2023; 17:1511-1521. [PMID: 36622271 DOI: 10.1021/acsnano.2c10535] [Citation(s) in RCA: 3] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/17/2023]
Abstract
Potassium (K) metal batteries have attracted great attention owing to their low price, widespread distribution, and comparable energy density. However, the arbitrary dendrite growth and side reactions of K metal are attributed to high environmental sensitivity, which is the Achilles' heel of its commercial development. Interface engineering between the current collector and K metal can tailor the surface properties for K-ion flux accommodation, dendrite growth inhibition, parasitic reaction suppression, etc. We have designed bifunctional layers via prepassivation, which can be recognized as an O/F-rich Sn-K alloy and a preformed solid-electrolyte interphase (SEI) layer. This Sn-K alloy with high substrate-related binding energy and Fermi level demonstrates strong potassiophilicity to homogeneously guide K metal deposition. Simultaneously, the preformed SEI layer can effectually eliminate side reactions initially, which is beneficial for the spatially and temporally KF-rich SEI layer on K metal. K metal deposition and protection can be implemented by the bifunctional layers, delivering great performance with a low nucleation overpotential of 0.066 V, a high average Coulombic efficiency of 99.1%, and durable stability of more than 900 h (1 mA cm-2, 1 mAh cm-2). Furthermore, the high-voltage platform, energy, and power densities of K metal batteries can be realized with a conventional Prussian blue analogue cathode. This work provides a paradigm to passivate fragile interfaces for alkali metal anodes.
Collapse
|
5
|
Processable Potassium-Carbon Nanotube Film with a Three-Dimensional Structure for Ultrastable Metallic Potassium Anodes. ACS APPLIED MATERIALS & INTERFACES 2022; 14:55577-55586. [PMID: 36475580 DOI: 10.1021/acsami.2c16255] [Citation(s) in RCA: 2] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/17/2023]
Abstract
K metal holds great promise as the ultimate anode candidate for K-ion batteries because of its high theoretical capacity and low operating potential. However, due to its high viscosity and poor mechanical processability, it remains challenging to manufacture potassium anodes with precise parameters by a simple and executable method. In this work, a high-performance potassium-carbon nanotubes (K@CNTs) composite film electrode with a three-dimensional (3D) skeleton and superior processability is prepared by simply incorporating CNTs into molten potassium. The in situ potassiation reaction between CNTs and molten K formed potassium carbide (KC8) so as to obtain a solid-liquid mixture, which can reduce the surface tension of molten potassium and promote the preparation of the K@CNTs film electrode. The composite electrode can be molded into a variety of shapes and thicknesses in accurate dimensions. The porous, well-conducting CNTs act as a 3D skeleton uniformly distributed in the K metal, providing adequate surface and space to accommodate and attract K metal, thereby inhibiting the growth of the potassium dendrites and the volume expansion upon cycling. As a result, the K@CNTs composite anode exhibits excellent cyclability and rate capability in both symmetric and full cells. The superior processability and excellent electrochemical performance make this composite an ideal anode candidate for commercial applications in potassium metal batteries.
Collapse
|
6
|
Active material and interphase structures governing performance in sodium and potassium ion batteries. Chem Sci 2022; 13:6121-6158. [PMID: 35733881 PMCID: PMC9159127 DOI: 10.1039/d2sc00946c] [Citation(s) in RCA: 13] [Impact Index Per Article: 6.5] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/14/2022] [Accepted: 04/24/2022] [Indexed: 12/16/2022] Open
Abstract
Development of energy storage systems is a topic of broad societal and economic relevance, and lithium ion batteries (LIBs) are currently the most advanced electrochemical energy storage systems. However, concerns on the scarcity of lithium sources and consequently the expected price increase have driven the development of alternative energy storage systems beyond LIBs. In the search for sustainable and cost-effective technologies, sodium ion batteries (SIBs) and potassium ion batteries (PIBs) have attracted considerable attention. Here, a comprehensive review of ongoing studies on electrode materials for SIBs and PIBs is provided in comparison to those for LIBs, which include layered oxides, polyanion compounds and Prussian blue analogues for positive electrode materials, and carbon-based and alloy materials for negative electrode materials. The importance of the crystal structure for electrode materials is discussed with an emphasis placed on intrinsic and dynamic structural properties and electrochemistry associated with alkali metal ions. The key challenges for electrode materials as well as the interface/interphase between the electrolyte and electrode materials, and the corresponding strategies are also examined. The discussion and insights presented in this review can serve as a guide regarding where future investigations of SIBs and PIBs will be directed.
Collapse
|
7
|
Abstract
Considered as an imperative alternative to the commercial LiFePO4 battery, the potassium metal battery possesses great potential in grid-scale energy storage systems due to the low cost, low standard redox potential, and high abundance of potassium. The potassium dendrite growth, large volume change, and unstable solid electrolyte interphase (SEI) on the potassium metal anode have, however, hindered its applications. Although conductive scaffolds coupling with potassium metal have been widely proposed to address the above issues, it remains challenging to fabricate a uniform composite with uncompromised capacity. Herein, we propose a facile and efficient strategy to construct dendrite-free and practical carbon-based potassium composite anodes via amine functionalization of the carbon scaffolds that enables fast molten potassium infusion within several seconds. On the basis of experiments and theoretical calculations, we show that highly potassiophilic amine groups immediately transform carbon scaffolds from nonwetting to wetting to postassium. Our carbon-cloth-based potassium composite anode (K@CC) can accommodate volume fluctuation, provide abundant nucleation sites, and lower the local current density, achieving nondendritic morphology with a stable SEI. The fabricated K0.7Mn0.7Ni0.3O2|K@CC full cell displays excellent rate capability and an ultralong lifespan over 8000 cycles (68.5% retention) at a high current of 1 A g-1.
Collapse
|
8
|
Artificial Heterogeneous Interphase Layer with Boosted Ion Affinity and Diffusion for Na/K-Metal Batteries. ADVANCED MATERIALS (DEERFIELD BEACH, FLA.) 2022; 34:e2109439. [PMID: 35106832 DOI: 10.1002/adma.202109439] [Citation(s) in RCA: 25] [Impact Index Per Article: 12.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 11/20/2021] [Revised: 01/24/2022] [Indexed: 06/14/2023]
Abstract
Metallic Na (K) are considered a promising anode materials for Na-metal and K-metal batteries because of their high theoretical capacity, low electrode potential, and abundant resources. However, the uncontrolled growth of Na (K) dendrites severely damages the stability of the electrode/electrolyte interface, resulting in battery failure. Herein, a heterogeneous interface layer consisting of metal vanadium nanoparticles and sodium sulfide (potassium sulfide) is introduced on the surface of a Na (K) foil (i.e., Na2 S/V/Na or K2 S/V/K). Experimental studies and theoretical calculations indicate that a heterogeneous Na2 S/V (K2 S/V) protective layer can effectively improve Na (K)-ion adsorption and diffusion kinetics, inhibiting the growth of Na (K) dendrites during Na (K) plating/stripping. Based on the novel design of the heterogeneous layer, the symmetric Na2 S/V/Na cell displays a long lifespan of over 1000 h in a carbonate-based electrolyte, and the K2 S/V/K electrode can operate for over 1300 h at 0.5 mA cm-2 with a capacity of 0.5 mAh cm-2 . Moreover, the Na full cell (Na3 V2 (PO4 )3 ||Na2 S/V/Na) exhibits a high energy density of 375 Wh kg-1 and a high power density of 23.5 kW kg-1 . The achievements support the development of heterogeneous protective layers for other high-energy-density metal batteries.
Collapse
|
9
|
Strategies toward anode stabilization in nonaqueous alkali metal-oxygen batteries. Chem Commun (Camb) 2022; 58:8014-8024. [DOI: 10.1039/d2cc02501a] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/21/2022]
Abstract
Alkali metal-O2 batteries exhibit ultra-high theoretical energy density which is even on a par with to fossil energy and expected to become the next generation of energy storage devices. However,...
Collapse
|
10
|
Prospects of Electrode Materials and Electrolytes for Practical Potassium-Based Batteries. SMALL METHODS 2021; 5:e2101131. [PMID: 34928013 DOI: 10.1002/smtd.202101131] [Citation(s) in RCA: 40] [Impact Index Per Article: 13.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 09/14/2021] [Revised: 10/19/2021] [Indexed: 05/20/2023]
Abstract
Potassium-ion batteries (PIBs) have attracted tremendous attention because of their high energy density and low-cost. As such, much effort has focused on developing electrode materials and electrolytes for PIBs at the material levels. This review begins with an overview of the high-performance electrode materials and electrolytes, and then evaluates their prospects and challenges for practical PIBs to penetrate the market. The current status of PIBs for safe operation, energy density, power density, cyclability, and sustainability is discussed and future studies for electrode materials, electrolytes, and electrode-electrolyte interfaces are identified. It is anticipated that this review will motivate research and development to fill existing gaps for practical potassium-based full batteries so that they may be commercialized in the near future.
Collapse
|
11
|
Design Principles of Sodium/Potassium Protection Layer for High-Power High-Energy Sodium/Potassium-Metal Batteries in Carbonate Electrolytes: a Case Study of Na 2 Te/K 2 Te. ADVANCED MATERIALS (DEERFIELD BEACH, FLA.) 2021; 33:e2106353. [PMID: 34569108 DOI: 10.1002/adma.202106353] [Citation(s) in RCA: 22] [Impact Index Per Article: 7.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 08/13/2021] [Revised: 08/25/2021] [Indexed: 06/13/2023]
Abstract
The sodium (potassium)-metal anodes combine low-cost, high theoretical capacity, and high energy density, demonstrating promising application in sodium (potassium)-metal batteries. However, the dendrites' growth on the surface of Na (K) has impeded their practical application. Herein, density functional theory (DFT) results predict Na2 Te/K2 Te is beneficial for Na+ /K+ transport and can effectively suppress the formation of the dendrites because of low Na+ /K+ migration energy barrier and ultrahigh Na+ /K+ diffusion coefficient of 3.7 × 10-10 cm2 s-1 /1.6 × 10-10 cm2 s-1 (300 K), respectively. Then a Na2 Te protection layer is prepared by directly painting the nanosized Te powder onto the sodium-metal surface. The Na@Na2 Te anode can last for 700 h in low-cost carbonate electrolytes (1 mA cm-2 , 1 mAh cm-2 ), and the corresponding Na3 V2 (PO4 )3 //Na@Na2 Te full cell exhibits high energy density of 223 Wh kg-1 at an unprecedented power density of 29687 W kg-1 as well as an ultrahigh capacity retention of 93% after 3000 cycles at 20 C. Besides, the K@K2 Te-based potassium-metal full battery also demonstrates high power density of 20 577 W kg-1 with energy density of 154 Wh kg-1 . This work opens up a new and promising avenue to stabilize sodium (potassium)-metal anodes with simple and low-cost interfacial layers.
Collapse
|
12
|
Towards Dendrite-Free Potassium-Metal Batteries: Rational Design of a Multifunctional 3D Polyvinyl Alcohol-Borax Layer. Angew Chem Int Ed Engl 2021; 60:25122-25127. [PMID: 34637181 DOI: 10.1002/anie.202111753] [Citation(s) in RCA: 8] [Impact Index Per Article: 2.7] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/30/2021] [Indexed: 11/08/2022]
Abstract
K metal is the optimal anode for K-ion batteries because of its high capacity and low operating potential, but it suffers from fast capacity fading and safety issues due to an unstable solid electrolyte interphase (SEI) and continuous K-dendrite growth. Herein, to obtain promising potassium-metal batteries, a 3D polyvinyl-alcohol (PVA)-borax layer is designed, which enables a dendrite-free K-plating/stripping process. The protective layer possesses good wettability, high K-ion diffusivity, and good structural stability, which enables a "uniform and underneath plating" behavior, therefore exhibiting a stable electrochemical performance. As a result, Cu current collector with PVA-borax (PVA-borax@Cu) exhibits a stable cycling lifetime for 700 h at 0.5 mA cm-2 and 500 h at 1 mA cm-2 at 10 % depth of discharge (DOD) without dendrite formation. Even at a high utilization of 25 % DOD and 50 % DOD, the PVA-borax@Cu shows a stable cycle for 180 h and 100 h, respectively.
Collapse
|
13
|
Towards Dendrite‐Free Potassium‐Metal Batteries: Rational Design of a Multifunctional 3D Polyvinyl Alcohol‐Borax Layer. Angew Chem Int Ed Engl 2021. [DOI: 10.1002/ange.202111753] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/06/2022]
|
14
|
Growth Mechanism of Micro/Nano Metal Dendrites and Cumulative Strategies for Countering Its Impacts in Metal Ion Batteries: A Review. NANOMATERIALS (BASEL, SWITZERLAND) 2021; 11:2476. [PMID: 34684917 PMCID: PMC8538702 DOI: 10.3390/nano11102476] [Citation(s) in RCA: 10] [Impact Index Per Article: 3.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 08/11/2021] [Revised: 09/01/2021] [Accepted: 09/15/2021] [Indexed: 01/09/2023]
Abstract
Metal-ion batteries are capable of delivering high energy density with a longer lifespan. However, they are subject to several issues limiting their utilization. One critical impediment is the budding and extension of solid protuberances on the anodic surface, which hinders the cell functionalities. These protuberances expand continuously during the cyclic processes, extending through the separator sheath and leading to electrical shorting. The progression of a protrusion relies on a number of in situ and ex situ factors that can be evaluated theoretically through modeling or via laboratory experimentation. However, it is essential to identify the dynamics and mechanism of protrusion outgrowth. This review article explores recent advances in alleviating metal dendrites in battery systems, specifically alkali metals. In detail, we address the challenges associated with battery breakdown, including the underlying mechanism of dendrite generation and swelling. We discuss the feasible solutions to mitigate the dendrites, as well as their pros and cons, highlighting future research directions. It is of great importance to analyze dendrite suppression within a pragmatic framework with synergy in order to discover a unique solution to ensure the viability of present (Li) and future-generation batteries (Na and K) for commercial use.
Collapse
|
15
|
|
16
|
Optimal utilization of fluoroethylene carbonate in potassium ion batteries. Chem Commun (Camb) 2021; 57:1607-1610. [PMID: 33443497 DOI: 10.1039/d0cc06467j] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/12/2023]
Abstract
This work provides a novel strategy of optimal utilization of fluoroethylene carbonate to generate a uniform and compact solid electrolyte interface film, enhancing the cycle life of potassium ion batteries. With K foil being treated with fluoroethylene carbonate prior to use, enhanced cycling performance up to 1200 hours was achieved. Combining in situ electrochemical impedance spectroscopy with the distribution of relaxation time analysis and XPS analysis, the solubility of KF in the electrolyte is proposed as a crucial factor to determine the quality of a solid electrolyte interface. Our work contributes to understanding the role and manipulating the usage of the fluoroethylene carbonate additive in potassium ion batteries.
Collapse
|
17
|
Electrolytes and Interphases in Potassium Ion Batteries. ADVANCED MATERIALS (DEERFIELD BEACH, FLA.) 2021; 33:e2003741. [PMID: 33410168 DOI: 10.1002/adma.202003741] [Citation(s) in RCA: 38] [Impact Index Per Article: 12.7] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 06/01/2020] [Revised: 08/18/2020] [Indexed: 06/12/2023]
Abstract
Potassium ion batteries (PIBs) are recognized as one promising candidate for future energy storage devices due to their merits of cost-effectiveness, high-voltage, and high-power operation. Many efforts have been devoted to the development of electrode materials and the progress has been well summarized in recent review papers. However, in addition to electrode materials, electrolytes also play a key role in determining the cell performance. Here, the research progress of electrolytes in PIBs is summarized, including organic liquid electrolytes, ionic liquid electrolytes, solid-state electrolytes and aqueous electrolytes, and the engineering of the electrode/electrolyte interfaces is also thoroughly discussed. This Progress Report provides a comprehensive guidance on the design of electrolyte systems for development of high performance PIBs.
Collapse
|
18
|
Abstract
To mitigate a global crisis of Li depletion, potassium-based rechargeable batteries have received significant attention because of their low cost and high specific energy density. In particular, the rechargeable potassium oxygen (K-O2) battery has been recognized as a promising energy storage technology because of its low overpotential and high round-trip efficiency based on the single-electron redox chemistry of potassium superoxide. Despite these merits, research on the development of K-O2 batteries is still in its early stages owing to a lack of understanding of the fundamental reaction chemistry and the difficulties encountered in handling, in terms of practical acceptability. Hence, it is necessary to summarize the representative works and provide overall insights on K-O2 batteries and recommendations for future studies. In this Perspective, we critically review the important scientific aspects of K-O2 batteries, discuss the current challenges encountered, and provide recommendations from the scientific and practical points of view. We hope that this Perspecitve will be helpful in designing innovative and advanced K-O2 batteries.
Collapse
|
19
|
A Graphite Intercalation Composite as the Anode for the Potassium-Ion Oxygen Battery in a Concentrated Ether-Based Electrolyte. ACS APPLIED MATERIALS & INTERFACES 2020; 12:37027-37033. [PMID: 32814396 DOI: 10.1021/acsami.0c06894] [Citation(s) in RCA: 4] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/11/2023]
Abstract
Nowadays, alkali metal-oxygen batteries such as Li-, Na-, and K-O2 batteries have been investigated extensively because of their ultrahigh energy density. However, the oxygen crossover of oxygen batteries and the intrinsic drawbacks of the metal anodes (i.e., large volume changes and dendrite issues) have still been unsolved key problems. Here, we demonstrate a novel design of the K-ion oxygen battery using a graphite intercalation composite as the anode in a highly concentrated ether-based electrolyte. Instead of the metal K anode, the potassium graphite intercalation compound as the anode is depotassiated/potassiated in a binary form below 0.3 V (vs. K+/K); correspondingly, the discharged product KO2 is formed/decomposed at the carbon nanotube cathode, and an all-carbon full cell exhibits impressive cycling stability with a working voltage of 2.0 V. Furthermore, the utilization of graphite intercalation chemistry has been demonstrated to be applicable in Li-O2 batteries as well. Therefore, this study may provide a new strategy to resolve the key problems of the alkali metal-oxygen batteries.
Collapse
|
20
|
Superoxide-Based K-O 2 Batteries: Highly Reversible Oxygen Redox Solves Challenges in Air Electrodes. J Am Chem Soc 2020; 142:11629-11640. [PMID: 32520559 DOI: 10.1021/jacs.0c05141] [Citation(s) in RCA: 21] [Impact Index Per Article: 5.3] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/13/2022]
Abstract
In the past 20 years, research in metal-O2 batteries has been one of the most exciting interdisciplinary fields of electrochemistry, energy storage, materials chemistry, and surface science. The mechanisms of oxygen reduction and evolution play a key role in understanding and controlling these batteries. With intensive efforts from many prominent research groups, it becomes clear that the instability of superoxide in the presence of Li ions (Li+) and Na ions (Na+) is the fundamental root cause for the poor stability, reversibility, and energy efficiency in aprotic Li-O2 and Na-O2 batteries. Stabilizing superoxide with large K ions (K+) provides a simple but elegant solution. Superoxide-based K-O2 batteries, invented in 2013, adopt the one-electron redox process of O2/potassium superoxide (KO2). Despite being the youngest metal-O2 technology, K-O2 is the most promising rechargeable metal-air battery with the combined advantages of low costs, high energy efficiencies, abundant elements, and good energy densities. However, the development of the K-O2 battery has been overshadowed by Li-O2 and Na-O2 batteries because one might think K-O2 is just an analogous extension. Moreover, due to the lower specific energy and the high reactivity of K metal, K-O2 is often underestimated and deemed unsuitable for practical applications. The objective of this Perspective is to highlight the unique advantages of K-O2 chemistry and to clarify the misconceptions prompted by the name "superoxide" and the judgment bias based on the claimed theoretical specific energies. We will also discuss the current challenges and our perspectives on how to overcome them.
Collapse
|
21
|
Review of Emerging Potassium-Sulfur Batteries. ADVANCED MATERIALS (DEERFIELD BEACH, FLA.) 2020; 32:e1908007. [PMID: 32249505 DOI: 10.1002/adma.201908007] [Citation(s) in RCA: 35] [Impact Index Per Article: 8.8] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 12/06/2019] [Revised: 02/13/2020] [Accepted: 02/25/2020] [Indexed: 06/11/2023]
Abstract
This is the first review on potassium-sulfur (K-S) batteries (KSBs), which are emerging metal battery (MB) systems. Since KSBs are quite new, there are fundamental questions regarding the electrochemistry of S-based cathode and of K metal anode, as well as the holistic aspects of full-cell performance. The manuscript begins with a critical discussion regarding the potassium-sulfur electrochemistry and on how it differs from the much better-known lithium-sulfur. Cathodes are discussed next, focusing on the role of sulfur structure, carbon host chemistry and porosity, and electrolytes in establishing the reversible potassium sulfide K2 Sn phase sequence, the parasitic polysulfide shuttle, pulverization-driven capacity fade, etc. Following is a discussion of solid-state electrolytes (SSEs), including of hybrid solid-liquid systems that show much promise. Potassium metal anodes are then critically reviewed, emphasizing electrolyte reactions to form stable versus unstable solid electrolyte interphase (SEI), covering the current understanding of potassium dendrites, and highlighting the deep-eutectic K-Na alloying approaches for room temperature liquid anodes. The manuscript concludes with K-S batteries, focusing on cell architectures and providing quantitative performance comparisons as master plots. Unanswered scientific/technological questions are identified, emerging research opportunities are discussed, and potential experimental and simulation-based studies that can unravel these unknowns are proposed.
Collapse
|