Polymer Encapsulants for Threshold Voltage Control in Carbon Nanotube Transistors

Polymer Coating Enabled Carrier Modulation for Single-Walled Carbon Nanotube Network Inverters and Antiambipolar Transistors

The control of the performance of single-walled carbon nanotube (SWCNT) random network-based transistors is of critical importance for their applications in electronic devices, such as complementary metal oxide semiconducting (CMOS)-based logics. In ambient conditions, SWCNTs are heavily p-doped by the H2O/O2 redox couple, and most doping processes have to counteract this effect, which usually leads to broadened hysteresis and poor stability. In this work, we coated an SWCNT network with various common polymers and compared their thin-film transistors' (TFTs') performance in a nitrogen-filled glove box. It was found that all polymer coatings will decrease the hysteresis of these transistors due to the partial removal of charge trapping sites and also provide the stable control of the doping level of the SWCNT network. Counter-intuitively, polymers with electron-withdrawing functional groups lead to a dramatically enhanced n-branch in their transfer curve. Specifically, SWCNT TFTs with poly (vinylidene fluoride) coating show an n-type mobility up to 61 cm2/Vs, with a decent on/off ratio and small hysteresis. The inverters constructed by connecting two ambipolar TFTs demonstrate high gain but with certain voltage loss. P-type or n-type doping from polymer coating layers could suppress unnecessary n- or p-branches, shift the threshold voltage and optimize the performance of these inverters to realize rail-to-rail switching. Similar devices also demonstrate interesting antiambipolar performance with tunable on and off voltage when tested in a different configuration.

Combination of Polymer Gate Dielectric and Two-Dimensional Semiconductor for Emerging Field-Effect Transistors

Two-dimensional (2D) materials are considered attractive semiconducting layers for emerging field-effect transistors owing to their unique electronic and optoelectronic properties. Polymers have been utilized in combination with 2D semiconductors as gate dielectric layers in field-effect transistors (FETs). Despite their distinctive advantages, the applicability of polymer gate dielectric materials for 2D semiconductor FETs has rarely been discussed in a comprehensive manner. Therefore, this paper reviews recent progress relating to 2D semiconductor FETs based on a wide range of polymeric gate dielectric materials, including (1) solution-based polymer dielectrics, (2) vacuum-deposited polymer dielectrics, (3) ferroelectric polymers, and (4) ion gels. Exploiting appropriate materials and corresponding processes, polymer gate dielectrics have enhanced the performance of 2D semiconductor FETs and enabled the development of versatile device structures in energy-efficient ways. Furthermore, FET-based functional electronic devices, such as flash memory devices, photodetectors, ferroelectric memory devices, and flexible electronics, are highlighted in this review. This paper also outlines challenges and opportunities in order to help develop high-performance FETs based on 2D semiconductors and polymer gate dielectrics and realize their practical applications.