Enhancement in Desalination Performance of Battery Electrodes via Improved Mass Transport Using a Multichannel Flow System

Emerging Frontiers in Multichannel Membrane Capacitive Deionization: Recent Advances and Future Prospects

Capacitive deionization (CDI) has emerged as a promising desalination technology and recently promoted the development of multichannel membrane capacitive deionization (MC-MCDI). In MC-MCDI, the independent control of multiflow channels, including the feed and electrolyte channels, enables the optimization of electrode operation in various modes, such as concentration gradients and reverse voltage discharge, facilitating semicontinuous operation. Moreover, the integration of redox couples into MC-MCDI has led to advancements in redox-mediated desalination. Specifically, the introduction of redox-active species helps enhance the ion removal efficiency and reduce energy consumption during desalination. This systematic approach, combining principles from CDI and electrodialysis, results in more sustainable and efficient desalination. These advancements have contributed to improved desalination performance and practical feasibility, rendering MC-MCDI an increasingly attractive option for addressing water scarcity challenges. Despite the considerable interest in and potential of this process, there is currently no comprehensive review available that covers the operational features and applications of MC-MCDI. Therefore, this Review provides an overview of recent research progress, focusing on the unique cell configuration, vital operation principles, and potential advantages over conventional CDI. Additionally, innovative applications of MC-MCDI are discussed. The Review concludes with insights into future research directions, potential opportunities in industrial desalination technology, and the fundamental and practical challenges for successful implementation.

Enhanced Desalination Performance Using Phosphate Buffer-Mediated Redox Reactions of Manganese Oxide Electrodes in a Multichannel System

Water desalination mediated by electrochemical reactions to directly capture and release salt at electrode materials offers a low-voltage method for producing freshwater. Developing new system designs has allowed electrode materials to maximize their capacity for salt separation, especially when a multichannel system is used to introduce a separate electrode rinse solution. Here, we show that the use of an additive can provide a new strategy for improving electrode capacity and, hence desalination performance, which so far has been limited to increasing the electrolyte concentration. A custom-built, 2/2-channel flow cell divided by two cation exchange membranes and an anion exchange membrane was fed with 50 mM NaCl as the feed (two inner channels) and 0.5 M NaCl containing up to 0.1 M phosphate as the electrode rinse (two outer channels). Using manganese oxide electrodes with phosphate buffer-mediated redox reactions exhibited an improved desalination capacity of 68.0 ± 5.2 mg g-1 (0.55 mA cm-2) and a rate of 5.6 ± 1.3 mg g-1 min-1 (0.96 mA cm-2). The improvement was attributed to the buffer that served as a proton donor for promoting the H+ insertion reaction of amorphous or poorly crystalline MnO2. Additionally, the buffering capacity against acidification and the creation of insoluble manganese phosphate on the electrode surface prevented the dissolution of Mn2+, which could otherwise occur at the anode due to a decrease in the local pH upon H+ deinsertion. Thus, the use of manganese oxide electrodes coupled with phosphate provides a new strategy of increasing electrode capacity for water desalination.

Electrochemical Methods for Water Purification, Ion Separations, and Energy Conversion

Agricultural development, extensive industrialization, and rapid growth of the global population have inadvertently been accompanied by environmental pollution. Water pollution is exacerbated by the decreasing ability of traditional treatment methods to comply with tightening environmental standards. This review provides a comprehensive description of the principles and applications of electrochemical methods for water purification, ion separations, and energy conversion. Electrochemical methods have attractive features such as compact size, chemical selectivity, broad applicability, and reduced generation of secondary waste. Perhaps the greatest advantage of electrochemical methods, however, is that they remove contaminants directly from the water, while other technologies extract the water from the contaminants, which enables efficient removal of trace pollutants. The review begins with an overview of conventional electrochemical methods, which drive chemical or physical transformations via Faradaic reactions at electrodes, and proceeds to a detailed examination of the two primary mechanisms by which contaminants are separated in nondestructive electrochemical processes, namely electrokinetics and electrosorption. In these sections, special attention is given to emerging methods, such as shock electrodialysis and Faradaic electrosorption. Given the importance of generating clean, renewable energy, which may sometimes be combined with water purification, the review also discusses inverse methods of electrochemical energy conversion based on reverse electrosorption, electrowetting, and electrokinetic phenomena. The review concludes with a discussion of technology comparisons, remaining challenges, and potential innovations for the field such as process intensification and technoeconomic optimization.

Asymmetric and Symmetric Redox Flow Batteries for Energy-Efficient, High-Recovery Water Desalination

Electrochemical separation offers an energy-efficient means to desalinate brackish water, a relatively untapped but increasingly utilized water source for freshwater supply. Several electrochemical techniques are being developed to enable low-energy desalination combined with energy storage. We report a new approach that produced a peak power density of 6.0 mW cm^-2 from the energy stored in iron cyanide (Fe-CN) and iron citrate (Fe-Cit) redox couples during water desalination, using asymmetric redox flow batteries (RFBs). Desalination and the charging of the redox couples occurred in a four-channel RFB cell. The stored energy was extracted in a two-channel RFB cell. Desalination of model brackish water (2.9 g L^-1) to freshwater (0.5 g L^-1) was also studied in a symmetric system using the environmentally benign Fe-Cit. The process was characterized by low energy consumption (0.56 kW h m^-3), high productivity (41.1 L freshwater m^-2 area h^-1, representing practical operating conditions for brackish water desalination), and high water recovery (91% product-to-intake water ratio, addressing the environmental and economic challenges of brine disposal). The low cell voltage (<0.5 V) required in the reported system is ideally suited for developing modular desalination systems powered by renewables, including solar energy. Collectively, water-based RFBs for desalination and power production would lead to sustainable water-energy infrastructure.

Dual-Zinc Electrode Electrochemical Desalination

Continuous and low-energy desalination technologies are in high demand to enable sustainable water remediation. Our work introduces a continuous desalination process based on the redox reaction of a dual-zinc electrode. The system consists of two zinc foils as redox electrodes with flowing ZnCl₂ electrolyte, concentrated and diluted salt streams with three anion- and cation-exchange membranes (AEM and CEM) separated configuration (AEM|CEM|AEM). If a constant current is applied, the negative zinc electrode is oxidized, and electrons are released to the external circuit, whereas the positive zinc electrode is reduced, causing salt removal in the dilution stream. The results showed that brackish water can be directly desalted to 380.6 ppm during a continuous batch-mode process. The energy consumption can be as low as 35.30 kJ mol^-1 at a current density of 0.25 mA cm^-2 , which is comparable to reverse osmosis. In addition, the dual-zinc electrode electrochemical desalination demonstrates excellent rate performance, reversibility, and batch cyclability through electrode exchange regeneration. Our research provides a route for continuous low-energy desalination based on metal redox mediators.

Short Review of Multichannel Membrane Capacitive Deionization: Principle, Current Status, and Future Prospect

Capacitive deionization (CDI) has gained a lot of attention as a promising water desalination technology. Among several CDI architectures, multichannel membrane CDI (MC-MCDI) has recently emerged as one of the most innovative systems to enhance the ion removal capacity. The principal feature of MC-MCDI is the independently controllable electrode channels, providing a favorable environment for the electrodes and enhancing the desalination performance. Furthermore, MC-MCDI has been studied in various operational modes, such as concentration gradient, reverse voltage discharging for semi-continuous process, and increase of mass transfer. Furthermore, the system configuration of MC-MCDI has been benchmarked for the extension of the operation voltage and sustainable desalination. Given the increasing interest in MC-MCDI, a comprehensive review is necessary to provide recent research efforts and prospects for further development of MC-MCDI. Therefore, this review actively addresses the major principle and operational features of MC-MCDI along with conventional CDI for a better understanding of the MC-MCDI system. In addition, the innovative applications of MC-MCDI and their notable improvements are also discussed. Finally, this review briefly mentions the major challenges of MC-MCDI as well as proposes future research directions for further development of MC-MCDI as scientific and industrial desalination technologies.

Enhancing the Desalination Performance of Capacitive Deionization Using a Layered Double Hydroxide Coated Activated Carbon Electrode

Capacitive deionization (CDI) is a promising desalination technology because of its simple, high energy efficient, and eco-friendly process. Among several factors that can affect the desalination capacitance of CDI, wettability of the electrode is considered one of the important parameters. However, various carbon materials commonly have a hydrophobic behavior that disturbs the ion transfer between the bulk solution and the surface of the electrode. In this study, we fabricated a layered double hydroxide (LDH) coated activated carbon electrode using an in-situ growth method to enhance the wettability of the surface of the carbon electrode. The well-oriented and porous LDH layer resulted in a better wettability of the activated carbon electrode, attributing to an enhanced capacitance compared with that of the uncoated activated carbon electrode. Furthermore, from the desalination tests of the CDI system, the LDH coated carbon electrode showed a higher salt adsorption capacity (13.9 mg/g) than the uncoated carbon electrode (11.7 mg/g). Thus, this enhanced desalination performance suggests that the improvement in the wettability of the carbon electrode by the LDH coating provides facile ion transfer between the electrode and electrolyte.