Enhanced Iridium Mass Activity of 6H-Phase, Ir-Based Perovskite with Nonprecious Incorporation for Acidic Oxygen Evolution Electrocatalysis

Bias-Induced Ga-O-Ir Interface Breaks the Limits of Adsorption-Energy Scaling Relationships for High-Performing Proton Exchange Membrane Electrolyzers

Rationally manipulating the in situ formed catalytically active surface of catalysts remains a significant challenge for achieving highly efficient water electrolysis. Herein, we present a bias-induced activation strategy to modulate in situ Ga leaching and trigger the dynamic surface restructuring of lamellar Ir@Ga2O3 for the electrochemical oxygen evolution reaction. The in situ reconstructed Ga-O-Ir interface sustains high water oxidation rates at oxygen evolution reaction (OER) overpotentials. We found that OER at the Ga-O-Ir interface follows a bi-nuclear adsorbate evolution mechanism with unsaturated IrOx as the active sites, while GaOx atoms play an indirect role in promoting water dissociation to form OH* and transferring OH* to Ir sites. This breaks the scaling relationship of the adsorption energies between OH* and OOH*, significantly lowering the energy barrier of the rate-limiting step and greatly increasing reactivity. The Ir@Ga2O3 catalyst achieves lower overpotentials, a current density of 2 A cm-2 at 1.76 V, and stable operation up to 1 A cm-2 in scalable proton exchange membrane water electrolyzer (PEMWE) at 1.63 V, maintaining stable operation at 1 A cm-2 over 1000 hours with a degradation rate of 11.5 μV h-1. This work prompted us to jointly address substrate-catalyst interactions and catalyst reconstruction, an underexplored path, to improve activity and stability in Ir PEMWE anodes.

Low Pt Loading on Wolframite-Type NiWO4 to Excel the Electrocatalytic Water Splitting and Ammonia Oxidation Reaction

Hydrogen production via water-splitting or ammonia electrolysis using transition metal-based electrodes is one of the most cost-effective approaches. Herein, ca. 1-4% of Pt atoms are stuffed into a wolframite-type NiWO4 lattice to improve the electrocatalytic efficiency. The co-existence of atomically dilute quantities of Pt0 and PtIV atoms in the NiWO4 without altering the lattice structure is established via powder X-ray diffraction, inductively coupled plasma mass spectrometry (ICP-MS), core-level X-ray photoelectron spectroscopy, and other spectroscopic studies. While the undoped NiWO4 and a physical mixture of Pt0 (2 wt %) and NiWO4 exhibit poor oxygen evolution reaction (OER), hydrogen evolution reaction (HER), and ammonia oxidation reaction (AOR) activities, 3-4% Pt-enriched NiWO4 depict improved electrocatalytic performances with at least 50 mV overpotential drop for both the OER and HER. The 3%Pt/NiWO4 electrode showcases a long-term (for 110 h) chronoamperometric/chronopotentiometric OER and HER performance, delivering high current at a low working potential. The bifunctional behavior of the material leads to the development of a water-splitting electrolyzer, 3%Pt/NiW/NF(-)/(+)3%Pt/NiW/NF, achieving >90% Faradaic efficiency for H2 production. The onset potential for the AOR is also cathodically shifted for 3%Pt/NiW and 4%Pt/NiW compared to the NiWO4 itself. Electrokinetic study through a rotating ring-disk electrode (RRDE) experiment and the Koutecký-Levich study provides an observed rate constant (kobs) of 1.68 × 10-3 cm s-1 of AOR with a 6e- count from the kinetic current region, highlighting [NO2]- as the major product. The electrolysis of 1 M NH3 using 4%Pt/NiW/NF as a working electrode produces predominantly [NO2]- (FE: 53%) and [NO3]- (FE: 30%). The improved electrocatalytic activity of 3-4% Pt-enriched NiWO4 can be due to the low Tafel slope and charge transfer resistance (Rct). Pt0 being electron-rich induces facile electronic conduction during electrocatalysis and enhances a better binding of the analytes such as H2O, [OH]-, and NH3. At the same time, the PtIV centers present adjacent to the NiII sites can polarize the electron density to stabilize NiIII species and enhance the possibility of OER and AOR. This study demonstrates the effect of hetero-metal doping to tune the electronic structure to improve the electrochemical activity. The low-Pt-doped NiWO4 material is presented here as a multimodal electrocatalyst that can efficiently electrolyze water or ammonia to produce hydrogen.

Recent Progress in Balancing the Activity, Durability, and Low Ir Content for Ir-Based Oxygen Evolution Reaction Electrocatalysts in Acidic Media

Proton exchange membrane (PEM) electrolysis faces challenges associated with high overpotential and acidic environments, which pose significant hurdles in developing highly active and durable electrocatalysts for the oxygen evolution reaction (OER). Ir-based nanomaterials are considered promising OER catalysts for PEM due to their favorable intrinsic activity and stability under acidic conditions. However, their high cost and limited availability pose significant limitations. Consequently, numerous studies have emerged aimed at reducing iridium content while maintaining high activity and durability. Furthermore, the research on the OER mechanism of Ir-based catalysts has garnered widespread attention due to differing views among researchers. The recent progress in balancing activity, durability, and low iridium content in Ir-based catalysts is summarized in this review, with a particular focus on the effects of catalyst morphology, heteroatom doping, substrate introduction, and novel structure development on catalyst performance from four perspectives. Additionally, the recent mechanistic studies on Ir-based OER catalysts is discussed, and both theoretical and experimental approaches is summarized to elucidate the Ir-based OER mechanism. Finally, the perspectives on the challenges and future developments of Ir-based OER catalysts is presented.

A Design Strategy for Highly Active Oxide Electrocatalysts by Incorporation of Oxygen-Vacancies

Using both density functional theory (DFT+U) simulations and experiments, we show that the incorporation of an ordered array of oxygen-vacancies in a perovskite oxide can lead to enhancement of the electrocatalytic activity for the oxygen-evolution reaction (OER). As a benchmark, LaCoO3 was investigated, where the incorporation of oxygen-vacancies led to La3Co3O8 (LaCoO2.67), featuring a structural transformation. DFT+U simulations demonstrated the effect of oxygen-vacancies on lowering the potential required to achieve negative Gibbs Free Energy for all steps of the OER mechanism. This was also confirmed by experiments, where the vacancy-ordered catalyst La3Co3O8 (LaCoO2.67) showed a remarkable enhancement of electrocatalytic properties over the parent compound LaCoO3 that lacked vacancies. We also synthesized and studied an intermediate system, with a smaller degree of oxygen-vacancies, which showed intermediate electrocatalytic activity, lower than La3Co3O8 and higher than LaCoO3, confirming the expected trend and the impact of oxygen-vacancies. Furthermore, we employed additional DFT+U calculations to simulate a hypothetical material with the same formula as La3Co3O8 but without the vacancy-order. We found that the gap between centers of Co d and O p bands, which is considered an OER descriptor, would be significantly greater for a hypothetical disordered material compared to an ordered system.

Partial Exsolution Enables Superior Bifunctionality of Ir@SrIrO3 for Acidic Overall Water Splitting

The pursuit of efficient and durable bifunctional electrocatalysts for overall water splitting in acidic media is highly desirable, albeit challenging. SrIrO3 based perovskites are electrochemically active for oxygen evolution reaction (OER), however, their inert activities toward hydrogen evolution reaction (HER) severely restrict the practical implementation in overall water splitting. Herein, an Ir@SrIrO3 heterojunction is newly developed by a partial exsolution approach, ensuring strong metal-support interaction for OER and HER. Notably, the Ir@SrIrO3-175 electrocatalyst, prepared by annealing SrIrO3 in 5% H2 atmosphere at 175 °C, delivers ultralow overpotentials of 229 mV at 10 mA cm-2 for OER and 28 mV at 10 mA cm-2 for HER, surpassing most recently reported bifunctional electrocatalysts. Moreover, the water electrolyzer using the Ir@SrIrO3-175 bifunctional electrocatalyst demonstrates the potential application prospect with high electrochemical performance and excellent durability in acidic environment. Theoretical calculations unveil that constructing Ir@SrIrO3 heterojunction regulates interfacial electronic redistribution, ultimately enabling low energy barriers for both OER and HER.

Novel sulfate solid supported binary Ru-Ir oxides for superior electrocatalytic activity towards OER and CER

Electrolysis for producing hydrogen powered by renewable electricity can be dramatically expanded by adapting different electrolytes (brine, seawater or pure water), which means the anode materials must stand up to complex electrolyte conditions. Here, a novel catalyst/support hybrid of binary Ru3.5Ir1Ox supported by barium strontium sulfate (BaSrSO4) was synthesized (RuIrOx/BSS) by exchanging the anion ligands of support. The as-synthesized RuIrOx/BSS exhibits compelling oxygen evolution (OER) and chlorine evolution (CER) performances, which affords to 10 mA cm-2 with only overpotential of 244 mV and 38 mV, respectively. The performed X-ray adsorption spectra clearly indicate the presence of an interface charge transfer effect, which results in the assignment of more electrons to the d orbitals of the Ru and Ir sites. The theoretical calculations demonstrated that the electronic structures of the catalytic active sites were modulated to give a lower overpotential, confirming the intrinsically high OER and CER catalytic activity.

Unraveling the Most Relevant Features for the Design of Iridium Mixed Oxides with High Activity and Durability for the Oxygen Evolution Reaction in Acidic Media

Proton exchange membrane water electrolysis (PEMWE) is the technology of choice for the large-scale production of green hydrogen from renewable energy. Current PEMWEs utilize large amounts of critical raw materials such as iridium and platinum in the anode and cathode electrodes, respectively. In addition to its high cost, the use of Ir-based catalysts may represent a critical bottleneck for the large-scale production of PEM electrolyzers since iridium is a very expensive, scarce, and ill-distributed element. Replacing iridium from PEM anodes is a challenging matter since Ir-oxides are the only materials with sufficient stability under the highly oxidant environment of the anode reaction. One of the current strategies aiming to reduce Ir content is the design of advanced Ir-mixed oxides, in which the introduction of cations in different crystallographic sites can help to engineer the Ir active sites with certain characteristics, that is, environment, coordination, distances, oxidation state, etc. This strategy comes with its own problems, since most mixed oxides lack stability during the OER in acidic electrolyte, suffering severe structural reconstruction, which may lead to surfaces with catalytic activity and durability different from that of the original mixed oxide. Only after understanding such a reconstruction process would it be possible to design durable and stable Ir-based catalysts for the OER. In this Perspective, we highlight the most successful strategies to design Ir mixed oxides for the OER in acidic electrolyte and discuss the most promising lines of evolution in the field.

Recent advances in proton exchange membrane water electrolysis

Proton exchange membrane water electrolyzers (PEMWEs) are an attractive technology for renewable energy conversion and storage. By using green electricity generated from renewable sources like wind or solar, high-purity hydrogen gas can be produced in PEMWE systems, which can be used in fuel cells and other industrial sectors. To date, significant advances have been achieved in improving the efficiency of PEMWEs through the design of stack components; however, challenges remain for their large-scale and long-term application due to high cost and durability issues in acidic conditions. In this review, we examine the latest developments in engineering PEMWE systems and assess the gap that still needs to be filled for their practical applications. We provide a comprehensive summary of the reaction mechanisms, the correlation among structure-composition-performance, manufacturing methods, system design strategies, and operation protocols of advanced PEMWEs. We also highlight the discrepancies between the critical parameters required for practical PEMWEs and those reported in the literature. Finally, we propose the potential solution to bridge the gap and enable the appreciable applications of PEMWEs. This review may provide valuable insights for research communities and industry practitioners working in these fields and facilitate the development of more cost-effective and durable PEMWE systems for a sustainable energy future.

Breaking the Activity and Stability Bottlenecks of Electrocatalysts for Oxygen Evolution Reactions in Acids

Oxygen evolution reaction (OER) is a cornerstone reaction for a variety of electrochemical energy conversion and storage systems such as water splitting, CO2 /N2 reduction, reversible fuel cells, and metal-air batteries. However, OER catalysis in acids suffers from extra sluggish kinetics due to the additional step of water dissociation along with its multiple electron transfer processes. Furthermore, OER catalysts often suffer from poor stability in harsh acidic electrolytes due to the severe dissolution/corrosion processes. The development of active and stable OER catalysts in acids is highly demanded. Here,  the recent advances in OER electrocatalysis in acids are reviewed and the key strategies are summarized to overcome the bottlenecks of activity and stability for both noble-metal-based and noble metal-free catalysts, including i) morphology engineering, ii) composition engineering, and iii) defect engineering. Recent achievements in operando characterization and theoretical calculations are summarized which provide an unprecedented understanding of the OER mechanisms regarding active site identification, surface reconstruction, and degradation/dissolution pathways. Finally, views are offered on the current challenges and opportunities to break the activity-stability relationships for acidic OER in mechanism understanding, catalyst design, as well as standardized stability and activity evaluation for industrial applications such as proton exchange membrane water electrolyzers and beyond.

Iron-Doped Monoclinic Strontium Iridate as a Highly Efficient Oxygen Evolution Electrocatalyst in Acidic Media

Ir-based perovskite oxides are efficient electrocatalysts for anodic oxygen evolution. This work presents a systematic study of the doping effects of Fe on the OER activity of monoclinic SrIrO₃ to reduce the consumption of Ir. The monoclinic structure of SrIrO₃ was retained when the Fe/Ir ratio was less than 0.1/0.9. Upon further increases in the Fe/Ir ratio, the structure of SrIrO₃ changed from a 6H to 3C phase. The SrFe_0.1Ir_0.9O₃ had the highest activity among the investigated catalysts with the lowest overpotential of 238 mV at 10 mA cm^-2 in 0.1 M HClO₄ solution, which could be attributed to the oxygen vacancies induced by the Fe dopant and the IrOx formed upon the dissolution of Sr and Fe. The formation of oxygen vacancies and uncoordinated sites at the molecular level may be responsible for the improved performance. This work explored the effect of Fe dopants in boosting the OER activity of SrIrO₃, thus providing a detailed reference to tune perovskite-based electrocatalyst by Fe for other applications.

Coupling Transition Metal Catalysts with Ir for Enhanced Electrochemical Water Splitting Activity

Developing advanced electrocatalysts is of great significance for boosting electrochemical water splitting to produce hydrogen. The electrocatalytic activity of a catalyst is associated with the surface/interface, geometric structure, and electronic properties. Coupling Ir with transition metal compounds is an effective strategy to improve their electrocatalytic performance. In this review, we summarize the recent progress of Ir coupled transition metal compound catalysts for the application in driving electrochemical water splitting. The significant role of Ir played in the promotion of electrocatalytic performance is firstly illustrated. Then, the applications of Ir-based catalysts in the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) are comprehensively discussed, with an emphasis on correlating the structure-function relationships. Lastly, the challenges and future directions for the fabrication of more advanced Ir coupled electrocatalysts are also presented.

Oxygen Evolution Electrocatalysts for the Proton Exchange Membrane Electrolyzer: Challenges on Stability

Hydrogen generated by proton exchange membrane (PEM) electrolyzer holds a promising potential to complement the traditional energy structure and achieve the global target of carbon neutrality for its efficient, clean, and sustainable nature. The acidic oxygen evolution reaction (OER), owing to its sluggish kinetic process, remains a bottleneck that dominates the efficiency of overall water splitting. Over the past few decades, tremendous efforts have been devoted to exploring OER activity, whereas most show unsatisfying stability to meet the demand for industrial application of PEM electrolyzer. In this review, systematic considerations of the origin and strategies based on OER stability challenges are focused on. Intrinsic deactivation of the material and the extrinsic balance of plant-induced destabilization are summarized. Accordingly, rational strategies for catalyst design including doping and leaching, support effect, coordination effect, strain engineering, phase and facet engineering are discussed for their contribution to the promoted OER stability. Moreover, advanced in situ/operando characterization techniques are put forward to shed light on the OER pathways as well as the structural evolution of the OER catalyst, giving insight into the deactivation mechanisms. Finally, outlooks toward future efforts on the development of long-term and practical electrocatalysts for the PEM electrolyzer are provided.

Recent Progress in Advanced Electrocatalyst Design for Acidic Oxygen Evolution Reaction

Proton exchange membrane (PEM) water electrolyzers hold great significance for renewable energy storage and conversion. The acidic oxygen evolution reaction (OER) is one of the main roadblocks that hinder the practical application of PEM water electrolyzers. Highly active, cost-effective, and durable electrocatalysts are indispensable for lowering the high kinetic barrier of OER to achieve boosted reaction kinetics. To date, a wide spectrum of advanced electrocatalysts has been designed and synthesized for enhanced acidic OER performance, though Ir and Ru based nanostructures still represent the state-of-the-art catalysts. In this Progress Report, recent research progress in advanced electrocatalysts for improved acidic OER performance is summarized. First, fundamental understanding about acidic OER including reaction mechanisms and atomic understanding to acidic OER for rational design of efficient electrocatalysts are discussed. Thereafter, an overview of the progress in the design and synthesis of advanced acidic OER electrocatalysts is provided in terms of catalyst category, i.e., metallic nanostructures (Ir and Ru based), precious metal oxides, nonprecious metal oxides, and carbon based nanomaterials. Finally, perspectives to the future development of acidic OER are provided from the aspects of reaction mechanism investigation and more efficient electrocatalyst design.

Electrocatalytic Oxygen Evolution Reaction in Acidic Conditions: Recent Progress and Perspectives

The electrochemical oxygen evolution reaction (OER) is an important half-cell reaction in many renewable energy conversion and storage technologies, including electrolyzers, nitrogen fixation, CO₂ reduction, metal-air batteries, and regenerative fuel cells. Among them, proton exchange membrane (PEM)-based devices exhibit a series of advantages, such as excellent proton conductivity, high durability, and good mechanical strength, and have attracted global interest as a green energy device for transport and stationary sectors. Nevertheless, with a view to rapid commercialization, it is urgent to develop highly active and acid-stable OER catalysts for PEM-based devices. In this Review, based on the recent advances in theoretical calculation and in situ/operando characterization, the OER mechanism in acidic conditions is first discussed in detail. Subsequently, recent advances in the development of several types of acid-stable OER catalysts, including noble metals, non-noble metals, and even metal-free OER materials, are systematically summarized. Finally, the current key issues and future challenges for materials used as acidic OER catalysis are identified and potential future directions are proposed.

Exceptionally Robust Face-Sharing Motifs Enable Efficient and Durable Water Oxidation

Corner-sharing oxides usually suffer from structural reconstruction during the bottleneck oxygen-evolution reaction (OER) in water electrolysis. Therefore, introducing dynamically stable active sites in an alternative structure is urgent but challenging. Here, 1D 5H-polytype Ba₅ Bi_0.25 Co_3.75 FeO_{14- δ} oxide with face-sharing motifs is identified as a highly active and stable candidate for alkaline OER. Benefiting from the stable face-sharing motifs with three couples of combined bonds, Ba₅ Bi_0.25 Co_3.75 FeO_{14- δ} can maintain its local structures even under high OER potentials as evidenced by fast operando spectroscopy, contributing to a negligible performance degradation over 110 h. Besides, the higher Co valence and smaller orbital bandgap in Ba₅ Bi_0.25 Co_3.75 FeO_{14- δ} endow it with a much better electron transport ability than its corner-sharing counterpart, leading to a distinctly reduced overpotential of 308 mV at 10 mA cm^-2 in 0.1 m KOH. Further mechanism studies show that the short distance between lattice-oxygen sites in face-sharing Ba₅ Bi_0.25 Co_3.75 FeO_{14- δ} can accelerate the deprotonation step (*OOH + OH^-  = *OO + H₂ O + e^- ) via a steric inductive effect to promote lattice-oxygen participation. In this work, not only is a new 1D face-sharing oxide with impressive OER performance discovered, but also a rational design of dynamic stable and active sites for sustainable energy systems is inaugurated.

Development of Perovskite Oxide-Based Electrocatalysts for Oxygen Evolution Reaction

Perovskite oxides are studied as electrocatalysts for oxygen evolution reactions (OER) because of their low cost, tunable structure, high stability, and good catalytic activity. However, there are two main challenges for most perovskite oxides to be efficient in OER, namely less active sites and low electrical conductivity, leading to limited catalytic performance. To overcome these intrinsic obstacles, various strategies are developed to enhance their catalytic activities in OER. In this review, the recent developments of these strategies is comprehensively summarized and systematically discussed, including composition engineering, crystal facet control, morphology modulation, defect engineering, and hybridization. Finally, perspectives on the design of perovskite oxide-based electrocatalysts for practical applications in OER are given.

Hydrous cobalt-iridium oxide two-dimensional nanoframes: insights into activity and stability of bimetallic acidic oxygen evolution electrocatalysts

Acidic oxygen evolution reaction (OER) electrocatalysts that have high activity, extended durability, and lower costs are needed to further the development and wide-scale adoption of proton-exchange membrane electrolyzers. In this work, we report hydrous cobalt-iridium oxide two-dimensional (2D) nanoframes exhibit higher oxygen evolution activity and similar stability compared with commercial IrO₂; however, the bimetallic Co-Ir catalyst undergoes a significantly different degradation process compared with the monometallic IrO₂ catalyst. The bimetallic Co-Ir 2D nanoframes consist of interconnected Co-Ir alloy domains within an unsupported, carbon-free, porous nanostructure that allows three-dimensional molecular access to the catalytically active surface sites. After electrochemical conditioning within the OER potential range, the predominately bimetallic alloy surface transforms to an oxide/hydroxide surface. Oxygen evolution activities determined using a rotating disk electrode configuration show that the hydrous Co-Ir oxide nanoframes provide 17 times higher OER mass activity and 18 times higher specific activity compared to commercial IrO₂. The higher OER activities of the hydrous Co-Ir nanoframes are attributed to the presence of highly active surface iridium hydroxide groups. The accelerated durability testing of IrO₂ resulted in lowering of the specific activity and partial dissolution of Ir. In contrast, the durability testing of hydrous Co-Ir oxide nanoframes resulted in the combination of a higher Ir dissolution rate, an increase in the relative contribution of surface iridium hydroxide groups and an increase in specific activity. The understanding of the differences in degradation processes between bimetallic and monometallic catalysts furthers our ability to design high activity and stability acidic OER electrocatalysts.

Low-iridium electrocatalysts for acidic oxygen evolution

The widespread use of proton-exchange membrane water electrolysis is limited by the dynamically sluggish oxygen evolution reaction (OER), which is mediated by noble iridium-based materials as active and stable electrocatalysts. Significant efforts have been made to decrease the amount of iridium in OER catalysts without sacrificing their catalytic performances. In this frontier paper, we present the main common issues relevant to the iridium-catalyzed OER, including catalytically active species, catalytic mechanisms and activity-stability relation. We also take iridium-based perovskites as an example, and summarize the recent theoretical and experimental advances in available strategies that can lead to highly efficient, low-iridium oxygen evolution electrocatalysts under acidic conditions. Finally, we propose the remaining challenges and future directions for exploring acidic OER catalysts.

Assembly of a Highly Active Iridium-Based Oxide Oxygen Evolution Reaction Catalyst by Using Metal-Organic Framework Self-Dissolution

The proton exchange membrane (PEM) electrolyzer for hydrogen production has multiple advantages but is greatly restricted by expensive iridium and sluggish oxygen evolution reaction (OER) kinetics. The most promising way to reduce the precious metal loading is to design and develop highly active Ir-based catalysts. In this study, a versatile approach is reported to prepare a hybrid in the form of a catalyst-support structure (Fe-IrO_x@α-Fe₂O₃, abbreviated Ir@Fe-MF) by utilizing the self-dissolving properties of Fe-MIL-101 under aqueous conditions. The formation of this hybrid is mainly due to the Ir⁴⁺ and released Fe³⁺ ions coprecipitated to assemble into Fe-IrO_x nanoparticles, and the Fe³⁺ released from the inward collapse of the metal-organic framework (MOF) spontaneously forms α-Fe₂O₃. The prepared Ir@Fe-MF-2 hybrid exhibits enhanced catalytic activity toward OER with a lower onset potential and Tafel slop, and only 260 mV overpotential is required to drive the current density to reach 10 mA cm^-2. The performed characterizations clearly indicate that the IrO₆ coordination structure is changed significantly by Fe incorporated into the IrO₂ lattice. The performed X-ray adsorption spectra (XAS) provides evidence that Ir 5d orbital degeneracy is eliminated because of multiple orbitals being semi-occupied in the presence of Fe, which is mainly responsible for the enhancement of OER activity. These findings open an opportunity for the design and preparation of more efficient OER catalysts of transition metal oxides by utilization of the MOF materials. It should be highlighted that a long-term stability of this catalyst run at a high current density in acidic conditions still faces great challenges.

Iridium Nanotubes as Bifunctional Electrocatalysts for Oxygen Evolution and Nitrate Reduction Reactions

One-dimensionally (1D) hollow noble meal nanotubes are attracting continuous attention because of their huge potential applications in catalysis and electrocatalysis. Herein, we successfully synthesize hollow iridium nanotubes (Ir NTs) with the rough porous surface by the 1-hydroxyethylidene-1, 1-diphosphonic acid-induced self-template method under hydrothermal conditions and investigate their electrocatalytic performance for oxygen evolution (OER) and nitrate reduction reactions (NO₃^-RR) in an acidic electrolyte. The unique 1D and porous structure endow Ir NTs with big surface areas, high conductivity, and optimal atom utilization efficiency. Consequently, Ir NTs exhibit significantly enhanced activity and durability for acidic OERs compared with commercial Ir nanocrystals (Ir c-NCs), which only require the overpotential of 245 mV to deliver the current density of 10 mA cm^-2. Meanwhile, Ir NTs also show higher electrocatalytic activity for NO₃^-RR than that of Ir c-NCs, such as a Faraday efficiency of 84.7% and yield rate of 921 μg h^-1 mg_cat^-1 for ammonia generation, suggesting that Ir NTs are universally advanced Ir-based electrocatalysts.

One-step fabrication of a self-supported Co@CoTe2 electrocatalyst for efficient and durable oxygen evolution reactions

The optimal hydrothermal synthesis of a Co@CoTe₂-240 electrode needs an overpotential of 286 mV to achieve a current density of 10 mA cm⁻² and is able to sustain galvanostatic OER electrolysis for 16 hours with little degradation of less than 20 mV.