Thin Films of Fully Noble Metal-Free POM@MOF for Photocatalytic Water Oxidation

Linker Engineering of High-Nuclearity {V12@P8W48}-Based Metal-Organic Frameworks for Green-Light-Driven Oxidative Coupling of Amines

The development of long-wavelength visible-light-responsive and reusable photocatalysts for organic transformation is of significant interest. Herein, we report the design and synthesis of high-nuclearity {V12@P8W48}-based metal-organic frameworks, POMOF1 and POMOF2, as heterogeneous photocatalysts for long-wavelength light-triggered oxidation. Linker engineering, by tuning from visible-light-inactive triazole (L1) to a photosensitive anthraquinone-derived ligand (L2), not only leads to the generation of porous 1D open channels within POMOF2 but also imparts a strong peak absorption centered at 500 nm. Moreover, the integration of {V12@P8W48} and Cu2+ ions together with L2 into POMOF2 enables the continued and broad absorption ranging from the ultraviolet to near-infrared region. Consequently, POMOF2 exhibited excellent activity in the green-light-driven oxidative coupling of benzylamines, affording a series of imines with high conversions of up to 99% under mild conditions. In contrast, POMOF1 could barely promote the reaction under the same conditions, further confirming the advantage of linker modulation. POMOF2 is stable and can be reused for three cycles with little loss of catalytic activity and structural integrity. This work highlights the potential of linker engineering as an efficient approach for designing long-wavelength photocatalysts, which can further push forward photoredox catalysis.

Development of polyoxometalate-loaded MOFs for heterogeneous catalysis and enhanced dye adsorption

This study focuses on the enhancement of MIL-117 functionality by incorporating a well-known polyoxometalate (POM), tetrabutylammonium octamolybdate [(n-C4H9)4N]4[Mo8O26]. Using an encapsulation method with conventional heating, Mo8O264- anions were for the first time successfully integrated into MIL-117 tubular channels (Mo8O26@MIL-117). Comprehensive characterization of the material through FTIR, XRD, BET, FE-SEM, EDX, and XPS confirmed the uniform distribution of Mo8O264- within MIL-117 without compromising its structural integrity. The Mo8O26@MIL-117 composite demonstrates exceptional catalytic performance in oxidative C-N bond formation and Paal-Knorr pyrrole synthesis, achieving high yields under optimized conditions with diverse amine substrates. Characterization and stability assessments confirm Mo8O26@MIL-117 as a robust and recyclable catalyst, maintaining structural integrity and catalytic activity over multiple cycles, highlighting its potential for sustainable applications in synthetic chemistry. The composite material was also evaluated for its efficacy in dye removal, specifically targeting methylene blue (MB) and Rhodamine B (RHB) from aqueous solutions. Mo8O26@MIL-117 exhibited superior adsorption capacity for MB compared to MIL-117 alone, demonstrating high efficiency even at elevated concentrations. The composite showed improved selectivity towards MB over RHB, highlighting its potential for selective dye removal in wastewater treatment applications.

Recent advances in metal-organic frameworks: Synthesis, application and toxicity

Metal-organic frameworks (MOFs) are a new class of crystalline porous hybrid materials with high porosity, large specific surface area and adjustable channel structure and biocompatibility, which are being investigated with increasing interest for energy storage and conversion, gas adsorption/separation, catalysis, sensing and biomedicine. However, the practical applications of MOFs make them release into the environment inevitable, posing a threat to humans and organisms. In this article, we cover advances in the currently available MOFs synthesis methods and the emerging applications of MOFs, especially in the biomedical field (therapeutic agents and bioimaging). Additionally, after evaluating the current status of main exposure routes and affecting factors in the field of MOFs-toxicity, the molecular mechanism is also clarified and identified. Knowledge gaps are identified from such a summarization and frontier development are explored for MOFs. Afterwards, we also present the limitations, challenges, and future perspectives in the study of the entire life cycle of MOFs. This review emphasizes the need for a more targeted discussion of the latest, widely used and effective versatile material class in order to exploit the full potential of high-performance and non-toxicity MOFs in the future.

Photochemical and gas adsorption studies of Keggin polyoxometalate functionalized porous melamine terephthaldehyde material

A compound containing a microporous melamine-terephthaldehyde framework is protonated by grinding with acetic acid, resulting in a mesoporous protonated melamine-terephthaldehyde network. The Keggin polyanion [PMo12O40]3- is then immobilized into this protonated melamine-terephthaldehyde network through a solid-state reaction. The polyanion interacts with the protonated microporous organic network through electrostatic interaction. Three different Keggin-melamine-terephthaldehyde materials were synthesized by varying the Keggin anion loading of 10 wt%, 15 wt% and 20 wt%. The Keggin-melamine-terephthaldehyde materials exhibit photochromism on irradiation with sunlight. The photochromism of the POM-organic hybrid material is due to reduction of the Keggin anion. The resulting blue reduced Keggin-melamine-terephthaldehyde materials are oxidized back by treatment with hydrogen peroxide. The N2, CO2 and H2 adsorption properties of all the synthesized materials, including protonated melamine-terephthaldehyde materials, were studied. The materials were characterized by IR, PXRD, DRS, TGA, EPR spectroscopy, and FESEM electron microscopy. The elemental composition was analysed with a CHN analyser and ICP-OES analysis.

Molecular Catalysis of Energy Relevance in Metal-Organic Frameworks: From Higher Coordination Sphere to System Effects

The modularity and synthetic flexibility of metal-organic frameworks (MOFs) have provoked analogies with enzymes, and even the term MOFzymes has been coined. In this review, we focus on molecular catalysis of energy relevance in MOFs, more specifically water oxidation, oxygen and carbon dioxide reduction, as well as hydrogen evolution in context of the MOF-enzyme analogy. Similar to enzymes, catalyst encapsulation in MOFs leads to structural stabilization under turnover conditions, while catalyst motifs that are synthetically out of reach in a homogeneous solution phase may be attainable as secondary building units in MOFs. Exploring the unique synthetic possibilities in MOFs, specific groups in the second and third coordination sphere around the catalytic active site have been incorporated to facilitate catalysis. A key difference between enzymes and MOFs is the fact that active site concentrations in the latter are often considerably higher, leading to charge and mass transport limitations in MOFs that are more severe than those in enzymes. High catalyst concentrations also put a limit on the distance between catalysts, and thus the available space for higher coordination sphere engineering. As transport is important for MOF-borne catalysis, a system perspective is chosen to highlight concepts that address the issue. A detailed section on transport and light-driven reactivity sets the stage for a concise review of the currently available literature on utilizing principles from Nature and system design for the preparation of catalytic MOF-based materials.

Polyoxometalate-based frameworks for photocatalysis and photothermal catalysis

Polyoxometalate-based frameworks (POM-based frameworks) are extended structures assembled from metal-oxide cluster units and organic frameworks that simultaneously possess the virtues of POMs and frameworks. They have been attracting immense attention because of their diverse architectures and charming topologies and also due to their probable application prospects in the areas of catalysis, separation, and energy storage. In this review, the recent progress in POM-based frameworks including POM-based metal organic frameworks (PMOFs), POM-based covalent organic frameworks (PCOFs), and POM-based supramolecular frameworks (PSFs) is systematically summarized. The design and construction of a POM-based framework and its application in photocatalysis and photothermal catalysis are introduced, respectively. Finally, our brief outlooks on the current challenges and future development of POM-based frameworks for photocatalysis and photothermal catalysis are provided.

POM@ZIF Derived Mixed Metal Oxide Catalysts for Sustained Electrocatalytic Oxygen Evolution

The design of efficient and stable oxygen evolution reaction (OER) catalysts based on noble-metal-free materials is crucial for energy conversion and storage. In this work, it was demonstrated how polyoxometalate (POM)-doped ZIF-67 can be converted into a stable oxygen evolution electrocatalyst by chemical etching, cation exchange, and thermal annealing steps. Characterization by X-ray photoelectron spectroscopy, transmission electron microscopy, energy-dispersive X-ray spectroscopy and Raman spectroscopy indicate that POM-doped ZIF-67 derived carbon-supported metal oxides were synthesized. The resulting composite shows structural and compositional advantages which lead to low overpotential (306 mV at j=10 mA ⋅ cm^-2 ) and long-term stability under harsh OER conditions (1.0 M aqueous KOH).

MOF/POM hybrids as catalysts for organic transformations

Insertion of molecular metal oxides, e.g. polyoxometalates (POMs), into metal-organic frameworks (MOFs) opens up new research opportunities in various fields, particularly in catalysis. POM/MOF composites have strong acidity, oxygen-rich surface, and redox capacity due to typical characteristics of POMs and the large surface area, highly organized structures, tunable pore size, and shape are due to MOFs. Such hybrid materials have gained a lot of attention due to astonishing structural features, and hence have potential applications in organic catalysis, sorption and separation, proton conduction, magnetism, lithium-ion batteries, supercapacitors, electrochemistry, medicine, bio-fuel, and so on. The exceptional chemical and physical characteristics of POMOFs make them useful as catalysts in simple organic transformations with high capacity and selectivity. Here, the thorough catalytic study starts with a brief introduction related to POMs and MOFs, and is followed by the synthetic strategies and applications of these materials in several catalytic organic transformations. Furthermore, catalytic conversions like oxidation, condensation, esterification, and some other types of catalytic reactions including photocatalytic reactions are discussed in length with their plausible catalytic mechanisms. The disadvantages of the POMOFs and difficulties faced in the field have also been explored briefly from our perspectives.

Decomposition-Reassembly Synthesis of a Silverton-Type Polyoxometalate 3D Framework: Semiconducting Properties and Photocatalytic Applications

Polyoxometalate-based all-inorganic three-dimensional (3D) frameworks have recently attracted attention as a unique class of materials due to their unique physicochemical properties and a wide field of application with excellent prospects. We herein synthesized a novel all-inorganic 3D framework material based on cobalt-substituted Silverton-type polyoxometalate, H₆{Co₆W₁₀O₄₂[Co(H₂O)₄]₃}·2H₂O (Co₉W₁₀), which was successfully constructed using Na₁₂[WCo₃^II(H₂O)₂(Co^IIW₉O₃₄)₂]·46-48H₂O (Co₅W₁₉) and Co(NO₃)₂·6H₂O as starting materials in a hydrothermal reaction via a decomposition-reassembly route together with the rational adjustment of pH values. Co₉W₁₀ has been structurally characterized using single-crystal X-ray diffraction. Photocurrent response, band-gap (E_g) value, and the VB-XPS spectrum have been measured to reveal the semiconducting property of Co₉W₁₀. Furthermore, we synthesized x% PTh/Co₉W₁₀ composites (PTh = polythiophene, x = 0.5, 1, 2, 5) for photodegradation of tetracycline hydrochloride (TH) to evaluate the photocatalytic activities of title composites. Due to the optimal molar ratio of hybrids and matching energy levels, 2% PTh/Co₉W₁₀ composites show the best photocatalytic activities among these composites.

Fabrication of a polyoxotungstate/metal-organic framework/phosphorus-doped reduced graphene oxide nanohybrid modified glassy carbon electrode by electrochemical reduction and its electrochemical properties

Hybrid nanocomposites based on polyoxometalates (POMs), metal-organic frameworks (MOFs), and graphene oxide (GO) have a unique set of properties. They have specific properties such as high acidity, oxygen-rich surface, and good redox capability from POMs. In contrast, they do not have weaknesses of POMs such as a low surface area, and high solubility in aqueous media. Herein, a novel organic-inorganic nanohybrid compound based on H3PW12O40 (PW12), a Co-based MOF, and GO was prepared. The prepared hybrid nanocomposite (PW12/MOF/GO) was characterized using different techniques. Then, a PW12/MOF/GO nanocomposite modified glassy carbon electrode (GCE) was fabricated by the drop-casting method and next was dried at room temperature. Then, the PW12/MOF/GO/GCE was subjected to electrochemical reduction at a constant potential of -1.5 V, in 0.1 M H3PO4 solution containing 0.10% w/v PW12/MOF/GO additive. The morphology, electrochemical activity, and stability of the modified electrode (PW12/MOF/P@ERGO/GCE) were studied with FE-SEM coupled with EDS, CV, and amperometry. The obtained results confirmed that the PW12/MOF/P@ERGO/GCE could be effective in hydrogen evolution reaction (HER). The electrochemical activity of the PW12/MOF/P@ERGO/GCE due to the desirable microstructure of the electrocatalyst (e.g. high active surface area and homogeneous distribution of the PW12/MOF/P@ERGO), and also the synergistic effect of the blocks, is more than those of PW12/GCE, MOF/GCE, PW12/MOF/GCE, and P@ERGO/GCE. Moreover, the PW12/MOF/P@ERGO/GCE showed an excellent long-term stability under the air atmosphere.

Encapsulation of Polymetallic Oxygen Clusters in a Mesoporous/Microporous Thorium-Based Porphyrin Metal-Organic Framework for Enhanced Photocatalytic CO2 Reduction

Solar-initiated CO₂ reduction is significant for green energy development. Herein, we have prepared a new mesoporous/microporous porphyrin metal-organic framework (MOF), IHEP-20, loaded with polymetallic oxygen clusters (POMs) to form a composite material POMs@IHEP-20 for visible-light-driven photocatalytic CO₂ reduction. The as-made composite material exhibits good stability in water from pH 0 to 11. After POMs were introduced to IHEP-20, they showed superior activity toward photocatalytic CO₂ reduction with a CO production rate of 970 μmol·g^-1·h^-1, which is 3.27 times higher than that of pristine IHEP-20. This study opens a new door for the design and synthesis of high-performance catalysts for the photocatalytic reduction of CO₂.

Insight into the Photocatalytic Activity of Cobalt-Based Metal–Organic Frameworks and Their Composites

Nowadays, materials with great potential for environmental protection are being sought. Metal–organic frameworks, in particular those with cobalt species as active sites, have drawn considerable interest due to their excellent properties. This review focuses on describing cobalt-based MOFs in the context of light-triggered processes, including dye degradation, water oxidation and splitting, carbon dioxide reduction, in addition to the oxidation of organic compounds. With the use of Co-based MOFs (e.g., ZIF-67, Co-MOF-74) as photocatalysts in these reactions, even over 90% degradation efficiencies of various dyes (e.g., methylene blue) can be achieved. Co-based MOFs also show high TOF/TON values in water splitting processes and CO2-to-CO conversion. Additionally, the majority of alcohols may be converted to aldehydes with efficiencies exceeding 90% and high selectivity. Since Co-based MOFs are effective photocatalysts, they can be applied in the elimination of toxic contaminants that endanger the environment.

pH-Controlled assembly of [ZnW12O40]6--based hybrids from a 0D dimer to a 2D network: synthesis, crystal structure, and photocatalytic performance in transformation of toluene into benzaldehyde

Polyoxometalate-based organic-inorganic hybrids have attracted considerable attention due to their fascinating structures and wide application prospects. In this work, using the same building blocks, ligands and metal ions (ZnW₁₂O₄₀^6-(ZnW₁₂), 2,2'-bipyridine (2,2'-bipy), and Cu²⁺), we synthesized three new POM-based hybrids by controlling the pH values of the reaction systems. These three compounds {(Zn_0.6(H₂)_0.4W₁₂O₄₀)[Cu(2,2'-bipy)(H₂O)][Cu(2,2'-bipy)(H₂O)₂][Cu(2,2'-bipy)(H₂O)₃]}₂·6H₂O (1), (Me₄N)₂{ZnW₁₂O₄₀[Cu(2,2'-bipy)(H₂O)][Cu(2,2'-bipy)(H₂O)₃]}·5H₂O (2), and {(Zn_0.5(H₂)_0.5W₁₂O₄₀)[Cu(2,2'-bipy)][Cu(2,2'-bipy)(H₂O)][Cu(2,2'-bipy)(H₂O)₂]}·5H₂O (3) have been structurally characterized by single-crystal X-ray diffraction. Compound 1 appears as a dimeric cluster structure, while compounds 2 and 3 appear as a 1D chain structure and a 2D network, respectively. The semiconducting properties of compounds 1-3 are different, which was demonstrated by band gap (E_g) and photocurrent response measurements. Compound 3 can efficiently catalyze the photooxidation of toluene to benzaldehyde with high selectivity using molecular oxygen as the oxidant component. Moreover, compound 3 was recycled and reused three times without significant degradation in conversion and selectivity. In addition, the mechanism of the photocatalytic reaction was also investigated.

An unprecedented polyoxometalate-based 1D double chain compound with opposite charges enables conductivity improvement

A POM-based one-dimensional (1D) chain compound, {BW₁₂O₄₀[Cu(2,2'-bipy)₂]₂[Cu(2,2'-bipy)(H₂O)]}{BW₁₂O₄₀[Cu(2,2'-bipy)₂][Cu(2,2'-bipy)(H₂O)₂]}·7H₂O, has been synthesized and structurally characterized, which represents an unprecedented 1D double chain structure with opposite charges. In contrast to common POMs, this compound exhibits a relatively high electrical conductivity of 1.17 × 10^-9 S cm^-1 at 25 °C. In addition, its semiconducting properties have also been investigated by application of photoelectrochemical sensing of H₂O₂.

Porphyrins and Polyoxometalate Scaffolds

Polyoxometalates (POMs) can act as unique reservoirs for multiple electron transfers. As POMs display only weak absorption in the visible spectrum, they can be associated with chromophores such as porphyrins and porphyrin antennae. In this Minireview, the research dedicated to the combination of porphyrins and polyoxometalates is put in context and the state of the art identifying the challenges addressed in the optimization of hybrid materials for applications is detailed.

Hydroxyapatite-Supported Polyoxometalates for the Highly Selective Aerobic Oxidation of 5-Hydroxymethylfurfural or Glucose to 2,5-Diformylfuran under Atmospheric Pressure

(NH4 )5 H6 PV8 Mo4 O40 supported on hydroxyapatite (HAP) (PMo4 V8 /HAP (n)) was prepared through the ion exchange of hydroxy groups. This ion exchange favored the oxidative conversion of 5-hydroxymethylfurfural (5-HMF) to 2,5-diformylfuran (DFF) in a one-pot cascade reaction with 96.0 % conversion and 83.8 % yield under 10 mL/min of O2 flow. PMo4 V8 /HAP (31) was used to explore the production of DFF directly from glucose with the highest yield of 47.9 % so far under atmospheric oxygen, whereas the yield of DFF increased to 54.7 % in a one-pot and two-step reaction. These results indicated that the active sites in PMo4 V8 /HAP (31) retained their activities without any interference toward one another, which enabled the production of DFF in a more cost-saving way by only using oxygen and one catalyst in a one-step reaction. Meanwhile, the rigid structure of HAP and strong interaction in PMo4 V8 /HAP (31) allowed this catalyst to be reused for at least six times with high stability and duration.

Heterogenisation of polyoxometalates and other metal-based complexes in metal–organic frameworks: from synthesis to characterisation and applications in catalysis

This review provides a thorough overview of composites with molecular catalysts (polyoxometalates, or organometallic or coordination complexes) immobilised into MOFs via non-covalent interactions.

Hofmeister effect in the Keggin-type polyoxotungstate series

The chaotropic character of Keggin-type polyoxotungstate anions was evaluated with respect to their ability to bind to γ-cyclodextrin (γ-CD) by varying the global charge density of the nanometer-sized polyanion.

Metal–organic frameworks and their derivatives as electrocatalysts for the oxygen evolution reaction

This review summarizes the recent progress on MOFs and their derivatives used for OER electrocatalysis in terms of their morphology, composition and structure–performance relationship.

Highly oriented and polyoxometalate-incorporating surface-attached metal-organic frameworks for efficient dye adsorption and water oxidation

We present a facile protocol for the controlled growth of highly oriented and polyoxometalate-incorporating HKUST-1 SURMOFs. Combining the spin-coating technique with alcohol-vapour induced growth, film thickness, crystallite orientation and crystal size can be precisely tuned. The SURMOFs exhibit excellent abilities in selective adsorption of cationic dyes and water oxidation.

Surface Atom Regulation on Polyoxometalate Electrocatalyst for Simultaneous Low-Voltage H2 Production and Phenol Degradation

The electrocatalytic hydrogen evolution reaction is an ideal method for H₂ production. To improve the performance of polyoxometalate-based electrocatalyst in the hydrogen evolution reaction, one O^2- in polyoxometalate is replaced by S^2-. This weakens the binding of polyoxometalate to H*, facilitates its desorption, and improves the H₂ generation property. Vulcanized polyoxometalate only requires 55 mV to achieve 10 mA·cm^-2 current in the hydrogen evolution reaction. This electrocatalyst also exhibits promising performance in phenol degradation reaction, which is an ideal substitute for high-energy-consuming oxygen evolution reaction in H₂ production due to low voltage to drive. To acquire 100 and 200 mA·cm^-2 in the phenol degradation reaction, this vulcanized polyoxometalate only consumes 1.38 and 1.41 V. With this electrocatalyst working as a cathode and an anode simultaneously, an electrolyzer is constructed by employing phenol-containing KOH as an electrolyte. To obtain 100 and 200 mA·cm^-2 current, the electrolyzer only requires 1.54 and 1.57 V. Because energy-efficient phenol degradation reaction occurs, these values are obviously lower than the oxygen evolution reaction involved in the overall water-splitting H₂ production. This work provides a universal method to enhance the hydrogen evolution reaction (HER) activity of polyoxometalates. Furthermore, a new method is explored, which achieves energy conservation and phenol degradation simultaneously in H₂ production.

Supramolecular strategies in artificial photosynthesis

Artificial photosynthesis is a major scientific endeavor aimed at converting solar power into a chemical fuel as a viable approach to sustainable energy production and storage. Photosynthesis requires three fundamental actions performed in order; light harvesting, charge-separation and redox catalysis. These actions span different timescales and require the integration of functional architectures developed in different fields of study. The development of artificial photosynthetic devices is therefore inherently complex and requires an interdisciplinary approach. Supramolecular chemistry has evolved to a mature scientific field in which programmed molecular components form larger functional structures by self-assembly processes. Supramolecular chemistry could provide important tools in preparing, integrating and optimizing artificial photosynthetic devices as it allows precise control over molecular components within such a device. This is illustrated in this perspective by discussing state-of-the-art devices and the current limiting factors - such as recombination and low stability of reactive intermediates - and providing exemplary supramolecular approaches to alleviate some of those problems. Inspiring supramolecular solutions such as those discussed herein will incite expansion of the supramolecular toolbox, which eventually may be needed for the development of applied artificial photosynthesis.

POM@MOF Hybrids: Synthesis and Applications

The hybrid materials that are created by supporting or incorporating polyoxometalates (POMs) into/onto metal–organic frameworks (MOFs) have a unique set of properties. They combine the strong acidity, oxygen-rich surface, and redox capability of POMs, while overcoming their drawbacks, such as difficult handling, a low surface area, and a high solubility. MOFs are ideal hosts because of their high surface area, long-range ordered structure, and high tunability in terms of the pore size and channels. In some cases, MOFs add an extra dimension to the functionality of hybrids. This review summarizes the recent developments in the field of POM@MOF hybrids. The most common applied synthesis strategies are discussed, together with major applications, such as their use in catalysis (organocatalysis, electrocatalysis, and photocatalysis). The more than 100 papers on this topic have been systematically summarized in a handy table, which covers almost all of the work conducted in this field up to now.

Co-immobilization of a Rh Catalyst and a Keggin Polyoxometalate in the UiO-67 Zr-Based Metal-Organic Framework: In Depth Structural Characterization and Photocatalytic Properties for CO2 Reduction

The Keggin-type polyoxometalate (POM) PW₁₂O₄₀^3- and the catalytic complex Cp*Rh(bpydc)Cl₂ (bpydc = 2,2'-bipyridine-5,5'-dicarboxylic acid) were coimmobilized in the Zr(IV) based metal organic framework UiO-67. The POM is encapsulated within the cavities of the MOF by in situ synthesis, and then, the Rh catalytic complex is introduced by postsynthetic linker exchange. Infrared and Raman spectroscopies, ³¹P and ¹³C MAS NMR, N₂ adsorption isotherms, and X-ray diffraction indicate the structural integrity of all components (POM, Rh-complex and MOF) within the composite of interest (PW₁₂,Cp*Rh)@UiO-67. DFT calculations identified two possible locations of the POM in the octahedral cavities of the MOF: one at the center of a UiO-67 pore with the Cp*Rh complex pointing toward an empty pore and one off-centered with the Cp*Rh pointing toward the POM. ³¹P-¹H heteronuclear (HETCOR) experiments ascertained the two environments of the POM, equally distributed, with the POM in interaction either with the Cp* fragment or with the organic linker. In addition, Pair Distribution Function (PDF) data were collected on the POM@MOF composite and provided key evidence of the structural integrity of the POM once immobilized into the MOF. The photocatalytic activity of the (PW₁₂,Cp*Rh)@UiO-67 composite for CO₂ reduction into formate and hydrogen were evaluated. The formate production was doubled when compared with that observed with the POM-free Cp*Rh@UiO-67 catalyst and reached TONs as high as 175 when prepared as thin films, showing the beneficial influence of the POM. Finally, the stability of the composite was assessed by means of recyclability tests. The combination of XRD, IR, ICP, and PDF experiments was essential in confirming the integrity of the POM, the catalyst, and the MOF after catalysis.