Novel Porous Carbons Derived from Coal Tar Rejects: Assessment of the Role of Pore Texture in CO2 Capture under Realistic Postcombustion Operating Temperatures

Enhanced CO2 Adsorption and Selectivity of CO2/N2 on Amine@ZIF-8 Materials

The ZIF-8 crystals were successfully postsynthetically modified using methylamine (MA), ethylenediamine (ED), and N, N ${}^{\prime }$ -dimethylethylenediamine (MMEN) to improve their adsorption performance toward CO2. Results showed that, compared with the original ZIF-8, the BET specific surface area of MA-ZIF-8, MMEN-ZIF-8, and ED-ZIF-8 has increased by 118.2%, 92.0%, and 29.8%, respectively. In addition, their total pore volume increased separately by 130.8%, 100%, and 48.7%. The adsorption capacities of CO2 on the amine-modified ZIF-8 samples followed the order $\text{MA}-\text{ZIF}-8>\text{MMEN}-\text{ZIF}-8>\text{ED}-\text{ZIF}-8>\text{ZIF}-8$ . The CO2 adsorption capacities at 298 K on MA-ZIF-8, MMEN-ZIF-8, and ED-ZIF-8 were increased by 118.2%, 90.2%, and 29.8%, respectively. What is more, the CO2/N2 selectivities calculated using an IAST model of the amine@ZIF-8 samples at 0.01 bar and 298 K were also significantly improved and followed the order $\text{MA}-\text{ZIF}-8\left(31.4\right)>\text{ED}-\text{ZIF}-8\left(25.1\right)>\text{MMEN}-\text{ZIF}-8\left(14.1\right)>\text{ZIF}-8\left(11.5\right)$ , which increased by 173.0%, 121.4%, and 22.6%, respectively. The isosteric heat of CO2 adsorption ( $Q_{\text{st}}$ ) on the MA-ZIF-8, MMEN-ZIF-8, and ED-ZIF-8 all becomes higher, while $Q_{\text{st}}$ of N2 on these samples was slightly lower in comparison with that on the ZIF-8. Furthermore, after six recycle runs of gravimetric CO2 adsorption-desorption on MA-ZIF-8, the adsorption performance of CO2 is still very good, indicating that the MA-ZIF-8 sample has good regeneration performance and can be applied into industrial CO2 adsorption and separation.

Irreversible deformation of hyper-crosslinked polymers after hydrogen adsorption

Hyper-crosslinked polymers (HCPs) have been produced by the Friedel-Crafts reaction using anthracene, benzene, carbazole or dibenzothiophene as precursors and dimethoxymethane as crosslinker, and the effect of graphene oxide (GO) addition has been studied. The resulting HCPs were highly microporous with BET areas (A_BET) between 590 and 1120 m²g^-1. The benzene-derived HCP (B1FeM2) and the corresponding composite with GO (B1FM2-GO) exhibited the highest A_BET and were selected to study their hydrogen adsorption capacities in the pressure range of 0.1 - 14 MPa at 77 K. The maximum H₂ excess uptake was 2.1 and 2.0 wt% for B1FeM2 and B1FeM2-GO, respectively, at 4 MPa and 77 K. The addition of GO reduced the specific surface area but increased the density of the resultant HCP-GO composites, which is beneficial for practical applications and proves that materials giving higher gravimetric storage capacities are not necessarily those that offer higher volumetric capacities. H₂ adsorption-desorption cycles up to 14 MPa showed irreversible deformation of both HCP and HCP-GO materials, which calls into question their application for hydrogen adsorption at pressures above 4 MPa.

A Step Forward in Understanding the Hydrogen Adsorption and Compression on Activated Carbons

Hydrogen adsorption on activated carbons (ACs) is a promising alternative to compression and liquefaction for storing hydrogen. Herein, we have studied hydrogen adsorption on six commercial ACs (CACs) with surface areas ranging from 996 to 2216 m² g^-1 in a temperature range of 77 to 273 K and pressures up to 15 MPa. Excess hydrogen adsorption capacities of 2.3 to 5.8 wt % were obtained at 77 K and 4 MPa. We demonstrated that, contrary to what is normally done, hydrogen capacity is more accurately predicted by the surface area determined by the nonlocal density functional theory method applied to N₂ and CO₂ adsorption data than by the Brunauer-Emmett-Teller (BET) area. The modified Dubinin-Astakhov (MDA) equation was used to fit the experimental adsorption data, and the relationship between the MDA parameters (n_max, V_a, α, and β) and the textural properties of the CACs was determined for the first time. We concluded that the n_max and V_a parameters are related to the BET area, while the α and β parameters are related to the average micropore size and total pore volume, respectively. α and β were used to evaluate the enthalpy and entropy of adsorption and we show that these parameters can be used to assess the best carbon for hydrogen storage or compression.

Sulfur-Decorated Hyper-Cross-Linked Coal Tar: A Microporous Organic Polymer for Efficient and Expeditious Mercury Removal

Hyper-cross-linked microporous organic polymers are a class of porous materials that have captured widespread attention owing to their high surface areas and wide range of monomeric sources. Balancing economy with performance is the initial hurdle when designing effective hyper-cross-linked microporous organic polymers. Herein, we demonstrated an inexpensive sulfurated solvent-knitted hyper-cross-linked microporous polymer scaffold, named sulfur-decorated hyper-cross-linked coal tar (CTHP-SES), utilizing coal tar as an aromatic monomer with numerous positions for potential chelation of toxic metals, particularly mercury, from water. The resulting material illustrated selective adsorption of mercury from both water (1037 mg g^-1) and the gas phase (416 mg g^-1) with rapid kinetics (183.67 mg min^-1 g^-1), good recyclability (4 runs), and excellent stability under both strong basic and acidic conditions. CTHP-SES was able to reduce the concentration of the Hg(II) solution from 1 mg L^-1 to 32 μg L^-1 after 10 min due in part to the promising distribution coefficient (K_d = 2.371 × 10⁶ mL g^-1). These results show that CTHP-SES offers a promising and practical platform to cope with a variety of environmental contaminations.

New amino group functionalized porous carbon for strong chelation ability towards toxic heavy metals

Herein, ethylenediamine functionalized porous carbon (PC-ED/1.5) was synthesized, then characterized by various methods and finally used as a functional material for Cu(ii) and Pb(ii) ion removal from water. XPS revealed the presence of numerous functionalities within the surface of PC including -NH and C-N-C groups. Furthermore, S BET, RS, XRD and FTIR analyses confirmed the changes implemented on the PC surface. Thereafter, a systematic study was implemented to analyze the interactions of the PC-ED/1.5 surface with Cu(ii) and Pb(ii) heavy metal ions. Hence, adsorption experiments showed that the PC-ED/1.5 exhibits maximum adsorption capacities of 123.45 mg g-1 and 140.84 mg g-1 for Cu(ii) and Pb(ii), respectively. Moreover, in situ electrostatic interactions occurring between the divalent cation and the PC-ED/1.5 functional groups was investigated. The mechanism involves chelation processes, electrostatic interactions and mechanical trapping of the metal ions in the adsorbent pores. Interestingly, a synergistic effect of the pores and surface active sites was observed. Finally, by using alginate bio-polymer we prepared membrane films of PC-ED/1.5 which showed long-term stability, regeneration capabilities and high mass recovery.