Constructing Amino-Functionalized Flower-like Metal-Organic Framework Nanofibers in Sulfonated Poly(ether sulfone) Proton Exchange Membrane for Simultaneously Enhancing Interface Compatibility and Proton Conduction

Hydroxylated hierarchical flower-like COF for solid-phase extraction of adrenergic receptor agonists in milk

A new detection platform based on a hydroxylated covalent organic framework (COF) integrated with liquid chromatography-tandem mass spectrometry (LC-MS/MS) was constructed and used for detecting adrenergic receptor agonists (ARAs) residues in milk. The hydroxylated COF was prepared by polymerization of tris(4-aminophenyl)amine and 1,3,5-tris(4-formyl-3-hydroxyphenyl)benzene and applied to solid-phase extraction (SPE) of ARAs. This hydroxylated COF was featured with hierarchical flower-like morphology, easy preparation, and copious active adsorption sites. The adsorption model fittings and molecular simulation were applied to explore the potential adsorption mechanism. This detection platform was suitable for detecting four α2- and five β2-ARAs residues in milk. The linear ranges of the ARAs were from 0.25 to 50 µg·kg-1; the intra-day and the inter-day repeatability were in the range 2.9-7.9% and 2.0-10.1%, respectively. This work demonstrates this hydroxylated COF has great potential as SPE cartridge packing, and provides a new way to determine ARAs residues in milk.

Composite proton exchange membrane for fuel cells based on chitosan modified by acid-base amphoteric nanoparticles

Currently, achieving a simultaneous improvement in proton conductivity and mechanical properties is a key challenge in using chitosan (CS) as a proton exchange membrane (PEM) substrate in direct methanol fuel cells (DMFCs). Herein, a novel nanofiller-zwitterionic molecule, (3-(3-aminopropyl) dimethylammonio) propane-1-sulfonate, ADPS)-modified polydopamine (PDA) (PDA-ADPS) was synthesized by the Michael addition reaction and was incorporated into a CS matrix to prepare CS/PDA-ADPS composite membranes. PDA-ADPS, which contains an acid-based ion pair can create new proton conduction channels in the composite membrane, improving proton conductivity. The proton conductivity of the CS/PDA-ADPS composite membrane was as high as 38.4 mS cm-1 at 80 °C. Moreover, due to the excellent compatibility and dispersibility of PDA-ADPS in the CS matrix, the obtained CS/PDA-ADPS composite membranes exhibited favorable mechanical properties. Such outstanding proton conductivity and mechanical properties guarantee good performance of the composite membranes in fuel cells. The peak power density of the CS/PDA-ADPS composite membranes was 30.2 mW cm-2 at 70 °C. This work provides a new strategy for fabricating high-performance CS based PEMs for DMFCs.

Sulfonated Poly Ether Sulfone Membrane Reinforced with Bismuth-Based Organic and Inorganic Additives for Fuel Cells

This research work focuses on developing a robust polymer electrolyte membrane (PEM) with high proton efficiency toward proton exchange membrane fuel cells (PEMFCs). In this study, poly ether sulfone (PES) was sulfonated by chlorosulfonic acid to yield sulfonated poly ether sulfone (SPES) followed by incorporation with bismuth-based additives such as bismuth trimesic acid (BiTMA) and bismuth molybdenum oxide (Bi2MoO6). The composite membrane was thoroughly investigated for its structural and physicochemical properties such as FT-IR, SEM, TGA, contact angle, water uptake, oxidative stability, ion-exchange capacity, and swelling ratio. Incorporation of additives into the polymer was confirmed by XPS and XRD analysis. The proton conductance of the pristine SPES is 4.19 × 10-3 S cm-1, whereas that of the composite membrane SPES/BiTMA-10 is 10 × 10-3 S cm-1 and that of SPES/Bi2MoO6-15 is 7.314 × 10-3 S cm-1; both the composite membranes exhibit higher proton conductivity than the pristine SPES membrane. The physicochemical characteristics and impedance measurements of the electrolyte reported can be viable to the PEM membrane.

High Proton Conductivity of the UiO-66-NH2-SPES Composite Membrane Prepared by Covalent Cross-Linking

A sulfonated poly(ethersulfone) (SPES)-metal-organic framework (MOF) film with excellent proton conductivity was synthesized by anchoring UiO-66-NH₂ to the main chain of the aromatic polymer through the Hinsberg reaction. The chemical bond was formed between the amino group in MOFs and the -SO₂Cl group in chlorosulfonated poly(ethersulfones) to conduct protons in the proton channel of the membrane, making the membrane have excellent proton conductivity. UiO-66-NH₂ is successfully prepared as a result of the consistency of the experimental and simulated powder X-ray diffraction (PXRD) patterns of MOFs. The existence of absorption peaks of characteristic functional groups in Fourier transform infrared (FTIR) spectra proved the successful preparation of SPES, PES-SO₂Cl, and a composite film. The results of the AC impedance test indicate that the composite film with a 3% mass fraction has the best proton conductivity of 0.215 S·cm^-1, which is 6.2 times higher than that of the blended film without a chemical bond at 98% RH and 353 K. To our knowledge, there are rarely any reports on the preparation of a composite membrane by directly linking MOFs and the membrane matrix with chemical bonds. This work provides a good way to synthesize the highly conductive proton exchange film.

Recent Advances in Metal-Organic Frameworks (MOFs) and Their Composites for Non-Enzymatic Electrochemical Glucose Sensors

In recent years, with pressing needs such as diabetes management, the detection of glucose in various substrates has attracted unprecedented interest from researchers in academia and industry. As a relatively new glucose sensor, non-enzymatic target detection has the characteristics of high sensitivity, good stability and simple manufacturing process. However, it is urgent to explore novel materials with low cost, high stability and excellent performance to modify electrodes. Metal-organic frameworks (MOFs) and their composites have the advantages of large surface area, high porosity and high catalytic efficiency, which can be utilized as excellent materials for electrode modification of non-enzymatic electrochemical glucose sensors. However, MOFs and their composites still face various challenges and difficulties that limit their further commercialization. This review introduces the applications and the challenges of MOFs and their composites in non-enzymatic electrochemical glucose sensors. Finally, an outlook on the development of MOFs and their composites is also presented.

Nanocomposite Membranes for PEM-FCs: Effect of LDH Introduction on the Physic-Chemical Performance of Various Polymer Matrices

This is a comparative study to clarify the effect of the introduction of layered double hydroxide (LDH) into various polymer matrices. One perfluorosulfonic acid polymer, i.e., Nafion, and two polyaromatic polymers such as sulfonated polyether ether ketone (sPEEK) and sulfonated polysulfone (sPSU), were used for the preparation of nanocomposite membranes at 3 wt.% of LDH loading. Thereafter, the PEMs were characterized by X-ray diffraction (XRD) and dynamic mechanical analysis (DMA) for their microstructural and thermomechanical features, whereas water dynamics and proton conductivity were investigated by nuclear magnetic resonance (PFG and T1) and EIS spectroscopies, respectively. Depending on the hosting matrix, the LDHs can simply provide additional hydrophilic sites or act as physical crosslinkers. In the latter case, an impressive enhancement of both dimensional stability and electrochemical performance was observed. While pristine sPSU exhibited the lowest proton conductivity, the sPSU/LDH nanocomposite was able to compete with Nafion, yielding a conductivity of 122 mS cm-1 at 120 °C and 90% RH with an activation energy of only 8.7 kJ mol-1. The outcome must be ascribed to the mutual and beneficial interaction of the LDH nanoplatelets with the functional groups of sPSU, therefore the choice of the appropriate filler is pivotal for the preparation of highly-performing composites.

Oxygen Plasma-Mediated Microstructured Hydrocarbon Membrane for Improving Interface Adhesion and Mass Transport in Polymer Electrolyte Fuel Cells

Developing a method for fabricating high-efficient and low-cost fuel cells is imperative for commercializing polymer electrolyte membrane (PEM) fuel cells (FCs). This study introduces a mechanical and chemical modification technique using the oxygen plasma irradiation process for hydrocarbon-based (HC) PEM. The oxygen functional groups were introduced on the HC-PEM surface through the plasma process in the controlled area, and microsized structures were formed. The modified membrane was incorporated with plasma-treated electrodes, improving the adhesive force between the HC-PEM and the electrode. The decal transfer was enabled at low temperatures and pressures, and the interfacial resistance in the membrane-electrode assembly (MEA) was reduced. Furthermore, the micropillar structured electrode configuration significantly reduced the oxygen transport resistance in the MEA. Various diagnostic techniques were conducted to find out the effects of the membrane surface modification, interface adhesion, and mass transport, such as physical characterizations, mechanical stress tests, and diverse electrochemical measurements.

Enhancing Proton Conductivity of Nafion Membrane by Incorporating Porous Tb-Metal-Organic Framework Modified with Nitro Groups

A rigid carboxylate ligand with a nitro functional group was selected to coordinate with Tb(III) cation, and Tb-MOF ({[Tb₄(L)₄(OH)₄(H₂O)₃]·8H₂O}_n, H₂L = 2-nitroterephthalic acid) with large porous and excellent hydrophilicity was obtained successfully. The obtained Tb-MOF was filled into the Nafion matrix to improve its proton conduction performance. The Tb-MOF/Nafion composite membrane was characterized by PXRD, IR, and thermogravimetry (TG) and for water uptake, area swelling, and proton conductivity. The activity energy, E_a, value of the composite membrane, which is a very important factor affecting the proton conduction performance of the membrane, was fitted and calculated. It was revealed that Tb-MOF can improve the proton conductivities of composite membranes, and the improvement degree and E_a value were both affected by Tb-MOF content. When Tb-MOF content was 5%, the proton conductivity of the composite membrane was 1.53 × 10^-2 S·cm^-1 at 100% RH and 80 °C, which is 1.81 times that of the pure Nafion membrane. A MOF containing a nitro functional group was first doped into Nafion in this study and exhibited excellent performance for improving composite membrane proton conductivity. This study will provide a valuable reference for designing different functionalized MOFs to promote the proton conductivities of proton exchange membranes.

A dual-function Cd-MOF with high proton conduction and excellent fluorescence detection of pyridine

Metal-organic frameworks have great potential in the field of proton conducting materials and fluorescent probes due to their structural tunability and designability. A novel water-stable metal organic framework material [Cd₂(Hdpb)(H₂O)₃] (Cd-MOF) was synthesized based on H₅dpb (H₅dpb = 3,5-diphosphonobenzoic acid) and Cd²⁺ ions. Cd²⁺ ions are connected with phosphonates and carboxyl groups of H₅dpb to form an infinitely extended 1D chain, which is further connected by the Hdpb^4- ligand and coordinated water to form a three-dimensional network structure. There are hydrogen bond networks in the 3D structure of the Cd-MOF, which are favorable for proton transfer, achieving its maximum proton conductivity of 2.97 × 10^-3 S cm^-1 at 338 K and 98% relative humidity (RH). To realize its application in fuel cells, the Cd-MOF was introduced into the chitosan (CS) matrix, and a series of composite membranes (Cd-MOF@CS-X) with high proton conductivity were obtained. The results of AC impedance show that the proton conductivity of Cd-MOF@CS-5 reaches 3.55 × 10^-1 S cm^-1 at 358 K and 98% RH, which is comparable to the highest values reported for MOF-polymer complexes. Moreover, the Cd-MOF can be used as a selective fluorescent probe for pyridine detection, and its detection limit can reach 1.0 × 10^-6 M. A bifunctional MOF with proton conduction and pyridine recognition is reported for the first time, and has important reference value for the practical application of functional MOFs in both electrochemical and luminescence sensing.

Dual-Functional Coordination Polymer with High Proton Conductivity and a Low-Detection-Limit Fluorescent Probe

A coordination polymer with dual functions of high proton conductivity and highly sensitive fluorescent sensors demonstrates a great application potential. In this work, a cadmium-based coordination polymer (denoted as CP 1) with hydrothermal stability was synthesized. The abundant coordination water, lattice water, and amino groups make an extended hydrogen-bonding pathway for efficient proton migration, which endows CP 1 with the highest proton conductivity of 2.41 × 10^-3 S·cm^-1 at 353 K and 98% RH. Especially, the proton conductivity of the chitosan (CS) hybrid membrane containing CP 1 reaches a maximum value of 2.62 × 10^-2 S·cm^-1 under 343 K and 98% RH, which increases almost 7 times higher than that of the pure CS membrane due to the host-guest collaboration. Furthermore, luminescence studies revealed that CP 1 is a high-sensitivity and good-selectivity fluorescent probe for the detection of trace amounts of l-histidine with a lowest detection limit of 1.0 × 10^-8 M.

High Proton Conductivity of a Cadmium Metal-Organic Framework Constructed from Pyrazolecarboxylate and Its Hybrid Membrane

A new type of metal-organic framework, [Cd₂(pdc)(H₂O)(DMA)₂]_n (pdc = 3,5-pyrazoledicarboxylic acid; DMA = dimethylamine), named Cd-MOF, was synthesized and characterized. There are regular rectangular pore channels containing a large number of dimethylamine cations in the crystal structure. AC impedance test results show the proton conductivity of Cd-MOF reaches 1.15 × 10^-3 S cm^-1 at 363 K and 98% RH. In order for its application in fuel cells, the Cd-MOF was introduced into a sulfonated polyphenylene oxide matrix to prepare a hybrid membrane, and the proton conductivity of the hybrid membrane has a high value of 2.64 × 10^-1 S cm^-1 at 343 K and 98% RH, which is higher than those of most MOF polymer hybrid membranes. The proton conductivity of the hybrid membrane of the SPPO polymer still maintains a certain degree of stability in a wide temperature range. To the best of our knowledge, it is the first proton exchange membrane that combines pyrazolecarboxylate cadmium MOFs and an SPPO polymer with high proton conductivity and good stability. This research may help to further develop the application of MOFs in the field of proton exchange membrane fuel cells.

Modifications on Promoting the Proton Conductivity of Polybenzimidazole-Based Polymer Electrolyte Membranes in Fuel Cells

Hydrogen-air proton exchange membrane fuel cells (PEMFCs) and direct methanol fuel cells (DMFCs) are excellent fuel cells with high limits of energy density. However, the low carbon monoxide (CO) tolerance of the Pt electrode catalyst in hydrogen-air PEMFCs and methanol permanent in DMFCs greatly hindered their extensive use. Applying polybenzimidazole (PBI) membranes can avoid these problems. The high thermal stability allows PBI membranes to work at elevated temperatures when the CO tolerance can be significantly improved; the excellent methanol resistance also makes it suitable for DMFCs. However, the poor proton conductivity of pristine PBI makes it hard to be directly applied in fuel cells. In the past decades, researchers have made great efforts to promote the proton conductivity of PBI membranes, and various effective modification methods have been proposed. To provide engineers and researchers with a basis to further promote the properties of fuel cells with PBI membranes, this paper reviews critical researches on the modification of PBI membranes in both hydrogen-air PEMFCs and DMFCs aiming at promoting the proton conductivity. The modification methods have been classified and the obtained properties have been included. A guide for designing modifications on PBI membranes for high-performance fuel cells is provided.

Two 6/10-connected Cu12S6 cluster-based organic frameworks: crystal structure and proton conduction

Nowadays, although the exploration of proton conductive materials has ranged from traditional sulfonated polymers to novel crystalline solid materials such as MOFs, COFs, and HOFs, research on crystalline cluster-based organic framework materials is very limited. Here, a pair of homologues Cu(i)-based organic framework containing a Cu12S6 cluster, [Cu12(MES)6(H2O)3]n (1) and {[Cu12(MPS)6(H2O)4]·6H2O}n (2) (H2MES = 2-mercaptoethanesulfonate acid and H2MPS = 2-mercaptoethanesulfonate acid), were hydrothermally synthesized under the same conditions and fully investigated for their proton conduction. Their structures were characterized by means of single-crystal X-ray diffraction, elemental analysis, thermogravimetric analyses, and PXRD measurements. The two MOFs show significant structural differences in the topological fashions. MOF 1 has a three-dimensional network and can be simplified into two topology types: a 10-connected gpu structure with a Schläfli symbol (312·426·57) and a 3,12-connected new topology with a point symbol {3·42}2{310·418·519·614·74·9}. MOF 2 also has a three-dimensional framework and topology as a 6-connected pcu primitive cubic network with a Schläfli symbol {412·63}. The two MOFs show different proton conduction parameters, but both indicate temperature-dependent proton conductive features. Intriguingly, the two MOFs exhibit high water stability and their proton conductivities are 3.63 × 10-5 and 2.75 × 10-5 S cm-1 under 333 K and 98% RH, respectively. The suggested mechanism for the synthesis for 1 and 2, and their proton conductivity performance comparison has been discussed in detail. In addition, Hirshfeld surface and fingerprint analysis on the two MOFs were computed to compare contacts between the molecules, which is essential for analyzing the relationships between their hydrogen bonds and proton conductivity properties.

Acidity effects of medium fluids on anhydrous proton conductivity of acid-swollen block polymer electrolyte membranes

Proton-conductive polymer electrolyte membranes (PEMs) were prepared by infiltrating sulfuric acid (Sa) or phosphoric acid (Pa) into a polystyrene-b-poly(4-vinylpyridine)-b-polystyrene (S–P–S) triblock copolymer. When the molar ratio of acid to pyridyl groups in S–P–S, i.e., the acid doping level (ADL), is below unity, the P-block/acid phase in the PEMs exhibited a moderately high glass transition temperature (T_g) of ∼140 °C because of consumption of acids for forming the acid–base complexes between the pyridyl groups and the acids, also resulting in almost no free protons in the PEMs; therefore, the PEMs were totally glassy and exhibited almost no anhydrous conductivity. In contrast, when ADL is larger than unity, the T_gs of the phase composed of acid and P blocks were lower than room temperature, due to the excessive molar amount of acid serving as a plasticizer. Such swollen PEMs with excessive amounts of acid releasing free protons were soft and exhibited high conductivities even without humidification. In particular, an S–P–S/Sa membrane with ADL of 4.6 exhibited a very high anhydrous conductivity of 1.4 × 10⁻¹ S cm⁻¹ at 95 °C, which is comparable to that of humidified Nafion membranes. Furthermore, S–P–S/Sa membranes with lower T_gs exhibited higher conductivities than S–P–S/Pa membranes, whereas the temperature dependence of the conductivities for S–P–S/Pa is stronger than that for S–P–S/Sa, suggesting Pa with a lower acidity would not be effectively dissociated into a dihydrogen phosphate anion and a free proton in the PEMs at lower temperatures.

Sulfuric acid-swollen block polymer membranes exhibit anhydrous conductivities of ∼0.1 S cm⁻¹ that is higher than those of phosphoric acid-swollen membranes, whereas temperature dependence of conductivities of the latter is stronger than the former.

SO42-/SnO2 Solid Superacid Granular Stacked One-Dimensional Hollow Nanofiber for a Highly Conductive Proton-Exchange Membrane

A novel sulfated tin oxide solid superacid granular stacked one-dimensional (1D) hollow nanofiber (SO₄^2-/FSnO₂) is proposed as a nanofiller in sulfonated poly(phthalazinone ether sulfone ketone) (SPPESK) to manipulate a highly conductive proton nanochannel. It has unique microstructures with an open-end hollow nanofibric morphology and grain-stacked single-layer mesoporous fiber wall, which greatly enlarge the specific surface area and aspect ratio. The diverse acid sites, that is, SO₄^2-, Sn-OH Brönsted, and Sn⁴⁺ Lewis superacids, provide a high concentration of strong acidic proton carriers on the nanofiber surface and dynamically abundant hydrogen bonds for rapid proton transfer and interfacial interactions with -SO₃H groups in the SPPESK along the 1D hollow nanofiber. As a result, long-range orientated ionic clusters are observed in the SO₄^2-/FSnO₂ incorporated membrane, leading to simultaneous enhancement of proton conductivity (226.7 mS/cm at 80 °C), mechanical stability (31.4 MPa for the hydrated membrane), fuel permeation resistance, and single-cell performance (936.5 and 147.3 mW/cm² for H₂/O₂ and direct methanol fuel cells, respectively). The superior performance, as compared with that of the zero-dimensional nanoparticle-incorporated membrane, Nafion 115, and previously reported SPPESK-based membranes, suggests a great potential of elaborating superstructural 1D hollow nanofillers for highly conductive proton-exchange membranes.

Disulfonated Poly(arylene ether sulfone) Random Copolymers Containing Hierarchical Iptycene Units for Proton Exchange Membranes

Two series of disulfonated iptycene-based poly(arylene ether sulfone) random copolymers, i.e., TRP-BP (triptycene-based) and PENT-BP (pentiptycene-based), were synthesized via condensation polymerization from disulfonated monomer and comonomers to prepare proton exchange membranes (PEMs) for potential applications in electrochemical devices such as fuel cell. To investigate the effect of iptycene units on membrane performance, these copolymers were systematically varied in composition (i.e., iptycene content) and the degree of sulfonation (i.e., 30–50%), which were characterized comprehensively in terms of water uptake, swelling ratio, oxidative stability, thermal and mechanical properties, and proton conductivity at various temperatures. Comparing to copolymers without iptycene units, TRP-BP and PENT-BP ionomers showed greatly enhanced thermal and oxidative stabilities due to strong intra- and inter-molecular supramolecular interactions induced by hierarchical iptycene units. In addition, the introduction of iptycene units in general provides PEMs with exceptional dimensional stability of low volume swelling ratio at high water uptakes, which is ascribed to the supramolecularly interlocked structure as well as high fractional free volume of iptycene-based polymers. It is demonstrated that the combination of high proton conductivity and good membrane dimension stability is the result of the synergistic effects of multiple factors including free volume (iptycene content), sulfonation degree, hydrophobicity, and swelling behavior (supramolecular interactions).

Highly selective sensing of Fe3+/Hg2+ and proton conduction using two fluorescent Zn(ii) coordination polymers

A pair of homologues, [Zn(Hssa)(1,4-bib)·H2O]n (1) and [Zn3(ssa)2(1,4-bib)3·4H2O]n (2), were successfully assembled using the same metals and ligands [H3ssa = 5-sulfosalicylic acid; 1,4-bib = 1,4-bis(1H-imidazol-1-yl)benzene] under solvothermal conditions. Polymer 1 is a two-dimensional (2D) sql network and polymer 2 is a three-dimensional (3D) framework. Polymer 2 can be simplified into two topology types: bct and tfc. The two polymers show significant differences in the fluorescence sensing of metal ions and proton conductivity. Their applications in detecting metal ions and proton conductivity were explored. Polymer 1 shows high sensitivity and selectivity for Fe3+, while polymer 2 can detect Hg2+ ions. The limit of detection was 1.66 μM with Fe3+ for 1 and 0.23 μM with Hg2+ for 2 in water. In addition, both 1 and 2 exhibit high water stability and proton conductivity. At 60 °C and 95% relative humidity, their conductivities were 3.45 × 10-5 and 6.26 × 10-6 S cm-1, respectively. A detailed analysis of the Hirshfeld surface and fingerprints was carried out for 1 and 2 to compare the interactions between the molecules, which is essential for analysing the relationship between their structures and material properties.

Solvent-Controlled Morphology of Amino-Functionalized Bimetal Metal-Organic Frameworks for Asymmetric Supercapacitors

The composition-tuned, structure-modified, and morphology-controlled nanoscale metal-organic frameworks (MOFs) are quite important to improve the electrochemical performances for supercapacitors. In this work, a solvent-controlled method to prepare amino-functionalized bimetal MOFs with various morphologies is proposed. Three different morphologies of NiCo-MOFs, such as nanospheres, nanosheet-assembled hollow spheres (NSHSs), and rhombus sheets, have been successfully synthesized by using different solvents. The as-prepared three nanoscale NiCo-MOFs are comparatively characterized and are endowed a possible mechanism on nucleation and crystal growth controlling morphology. When used as electrode materials for supercapacitors, all NiCo-MOFs have excellent electrochemical properties. Specifically, the NiCo-MOF NSHS owns the best specific capacitance, which can achieve 1126.7 F g^-1 at the current density of 0.5 A g^-1 and maintain 93% of its original capacitance at the current density of 10 A g^-1 after 3000 charge-discharge cycles. Moreover, an asymmetric supercapacitor device (NiCo-MOF NSHS//AC) assembled with NiCo-MOF NSHS as the positive electrode and activated carbon (AC) as the negative electrode achieves an energy density of 20.94 Wh kg^-1 at a power density of 750.84 W kg^-1. This work is facile and highly reproducible and can be extended to prepare other nano-MOFs in energy storage and conversion fields. In addition, it opens up an effective approach to synthesizing amino-functionalized MOFs by a solvent-controlled method without any other changes in the experimental conditions.