Facile Synthesis of Ti3C2Tx-Poly(vinylpyrrolidone) Nanocomposites for Nonvolatile Memory Devices with Low Switching Voltage

Recent strategies, progress, and prospects of two-dimensional metal carbides (MXenes) materials in wastewater purification: A review

With the rapid development of industrialization, water pollution directly leads to the serious shortage of fresh water. As reported by the World Water Council, nearly 3.8 billion people will face water scarcity by 2030. Therefore, developing advanced nanomaterials to realize wastewater purification is a major challenge. Two-dimensional (2D) transition metal carbides (MXenes), as the emerging 2D layered nanomaterials, have been investigated for the applications of water purification treatment since first reported in 2011. Over 40 different MXenes have been developed for environmental remediation, and dozens more structures and properties are theoretically predicted. Here, we review the advances from the aspects of synthesis strategies for MXenes, purification mechanism, and their applications in wastewater treatment processes. The major points are 1) the synthesis and modification approaches for MXenes such as multi-layered stacked MXenes and delaminated MXenes 2) a discussion of current water remediation over MXene-based materials, 3) a brief introduction for removal behaviors and deep interaction mechanisms, 4) optimization strategies and key points for boosting the remediation performance of MXenes.

N/P co-doped MXene hollow microcapsules by surfactants assisted hydrothermal-freeze drying for adjustable permeability

The assembly of MXene materials into microcapsules has drawn great attentions due to their unique properties. However, rational design and synthesis of MXene-based microcapsules with specific nanostructures at the molecular scale remains challenging. Herein, we report a strategy to synthesize N/P co-doped MXene hollow flower-like microcapsules with adjustable permeability via dual surfactants assisted hydrothermal-freeze drying method. In contrast to anionic surfactants, cationic surfactants exhibited effective electrostatic interactions with MXene nanosheets during the hydrothermal process. Manipulation of dual surfactants in hydrothermal process realized N and P co-doping of MXene to improve flexibility and promoted the generation of abundant internal cavities in flower-like microcapsules. Based on the unique microstructure, the prepared hollow flower-like microcapsules showed excellent performance, stability and reusability in size-selective release of small organic molecules. Moreover, the release rate can be controlled by turning the oxidation state and type of MXene. The strategy delineates promising prospects for the design of MXene-based microcapsules with specific structures.

Recent progress in energy, environment, and electronic applications of MXene nanomaterials

Since the discovery of graphene, two-dimensional (2D) materials have gained widespread attention, owing to their appealing properties for various technological applications. Etched from their parent MAX phases, MXene is a newly emerged 2D material that was first reported in 2011. Since then, a lot of theoretical and experimental work has been done on more than 30 MXene structures for various applications. Given this, in the present review, we have tried to cover the multidisciplinary aspects of MXene including its structures, synthesis methods, and electronic, mechanical, optoelectronic, and magnetic properties. From an application point of view, we explore MXene-based supercapacitors, gas sensors, strain sensors, biosensors, electromagnetic interference shielding, microwave absorption, memristors, and artificial synaptic devices. Also, the impact of MXene-based materials on the characteristics of respective applications is systematically explored. This review provides the current status of MXene nanomaterials for various applications and possible future developments in this field.

Modulating the Activity of Enzyme in Metal-Organic Frameworks Using the Photothermal Effect of Ti3C2 Nanosheets

Enzymes are versatile catalysts with high potential in various applications, and much attention has been paid to the stability improvement of native enzymes and activity modulation. Encapsulation in metal-organic frameworks (MOFs) as an efficient strategy for protecting fragile native enzymes while modulating the activity of enzymes remotely, which is practically demanded, has rarely been explored in MOF-encapsulated enzymes. Herein, Ti₃C₂ nanosheets exhibiting photothermal effect and biocompatibility were encapsulated in Cyt c-embedded ZIF-8 to tailor the enzymatic activity remotely by near-infrared (NIR) irradiation for the first time. By exposure to NIR light, the temperature of an aqueous solution containing Ti₃C₂/Cyt c@ZIF-8 increases obviously (up to 15 °C), while that of Cyt c@ZIF-8 shows no change. The enzymatic activity in the composites with a certain amount of nanosheets increases, which is attributed to the created defect and transformed microenvironment caused by the introduction of nanosheets. Importantly, the enzymatic activity in ZIF-8 can be further enhanced up to 150% under NIR light irradiation, and this enhancement can be modulated flexibly by varying laser power density. Our investigations indicate that Ti₃C₂ nanosheets are promising candidates for modulating the activity of encapsulated enzymes remotely.

Tunable biological nonvolatile multilevel data storage devices

The speed with which electronic products are updated is continuously increasing. Consequently, since waste electronic products can cause serious environmental pollution, the demand for electronic products made of biological materials is becoming increasingly urgent. Although biological memristors have significant advantages, their electrical characteristics still do not meet the requirements to be used in future nonvolatile memories. Therefore, how to control their electrical characteristics has become a popular topic of research. In this study, tunable biomemristors with an Al/tussah blood (TB)-carbon nanotube (CNT)/indium tin oxide (ITO)/glass structure were fabricated. Such a device exhibits stable bipolar resistance switching behavior and good retention characteristics (10⁴ s). Experimental results show that the ON/OFF current ratio can be effectively controlled by modifying the CNT concentration in the TB-CNT composite film. Multilevel (8 levels, 3 bits per cell) storage capabilities can be achieved in the device by controlling its compliance current in order to achieve high-density storage. The resistance switching behavior originates from the formation and rupture of conductive oxygen vacancy filaments. TB is a promising natural biomaterial in the field of green electronics, and this research could blaze a new trail for the development of biological memory devices. Biomemristors with multilevel resistance states can be used as electronic synapses and are one of the choices for simulating biological synapses.

Ti3C2-Based MXene Oxide Nanosheets for Resistive Memory and Synaptic Learning Applications

MXene, a new state-of-the-art two-dimensional (2D) nanomaterial, has attracted considerable interest from both industry and academia because of its excellent electrical, mechanical, and chemical properties. However, MXene-based device engineering has rarely been reported. In this study, we explored Ti₃C₂ MXene for digital and analog computing applications by engineering the top electrode. For this purpose, Ti₃C₂ MXene was synthesized by a simple chemical process, and its structural, compositional, and morphological properties were studied using various analytical tools. Finally, we explored its potential application in bipolar resistive switching (RS) and synaptic learning devices. In particular, the effect of the top electrode (Ag, Pt, and Al) on the RS properties of the Ti₃C₂ MXene-based memory devices was thoroughly investigated. Compared with the Ag and Pt top electrode-based devices, the Al/Ti₃C₂/Pt device exhibited better RS and operated more reliably, as determined by the evaluation of the charge-magnetic property and memory endurance and retention. Thus, we selected the Al/Ti₃C₂/Pt memristive device to mimic the potentiation and depression synaptic properties and spike-timing-dependent plasticity-based Hebbian learning rules. Furthermore, the electron transport in this device was found to occur by a filamentary RS mechanism (based on oxidized Ti₃C₂ MXene), as determined by analyzing the electrical fitting curves. The results suggest that the 2D Ti₃C₂ MXene is an excellent nanomaterial for non-volatile memory and synaptic learning applications.

Hybridization with Ti3C2Tx MXene: An Effective Approach to Boost the Hydrothermal Stability and Catalytic Performance of Metal-Organic Frameworks

Metal-organic frameworks (MOFs) have attracted increasing research enthusiasm owing to their tunable functionality, diverse structure characteristics, and large surface area. However, poor hydrothermal stability restricts the utilization of some MOFs in practical applications. Our work aims at improving the hydrothermal stability of a representative MOF, namely, HKUST-1, by incorporating a two-dimensional material Ti₃C₂T_x MXene for the first time. A new type of hybrid material is synthesized through the hybridization of HKUST-1 and Ti₃C₂T_x, and the obtained hybrids show improved hydrothermal stability as well as catalytic performance. The porosity of hybrids is enhanced when incorporating an appropriate amount of Ti₃C₂T_x, and the surface area can reach 1380 m²·g^-1, while the pristine HKUST-1 is 1210 m²·g^-1. After the hydrothermal treatment (hot water vapor, 70 °C), the structure of hybrid materials maintains well, while the framework of HKUST-1 is severely destroyed. When catalyzing the ring-opening reaction of styrene oxide, the conversion reaches 76.7% only for 20 min, which is much higher than that of pure HKUST-1 (23.1% for 20 min). More importantly, the catalytic activity could recover without loss even after six cycles. Our hybrid materials are promising in practical catalytic applications due to their excellent hydrothermal stability, catalytic activity, and reusability.

Bistable non-volatile resistive memory devices based on ZnO nanoparticles embedded in polyvinylpyrrolidone

The resistive random access memory (RRAM) devices based on polyvinylpyrrolidone (PVP) and PVP:PVP:zinc oxide nanoparticle (ZnO NP) active layers have bistable electrical switching behavior. Herein, via a series of storage performance tests, it was proved that the ITO/PVP:ZnO/Al device has a higher ON/OFF current ratio and better memory performance than the ITO/PVP/Al device. Moreover, at 13 wt% concentration of ZnO NPs, optimal storage performance was obtained, the switch state current ratio significantly increased, and the threshold voltage obviously decreased. The conduction mechanism of the devices was further discussed. The device having inorganic nanoparticles embedded in the polymer has excellent storage performance, which has potential application value in data storage.

The resistive random access memory (RRAM) devices based on polyvinylpyrrolidone (PVP) and PVP:PVP:zinc oxide nanoparticle (ZnO NP) active layers have bistable electrical switching behavior.