Rechargeable Zinc-Air Battery with Ultrahigh Power Density Based on Uniform N, Co Codoped Carbon Nanospheres

Zinc-Mediated Template Synthesis of Hierarchical Porous N-Doped Carbon Electrocatalysts for Efficient Oxygen Reduction

The development of highly active and low-cost catalysts for use in oxygen reduction reaction (ORR) is crucial to many advanced and eco-friendly energy techniques. N-doped carbons are promising ORR catalysts. However, their performance is still limited. In this work, a zinc-mediated template synthesis strategy for the development of a highly active ORR catalyst with hierarchical porous structures was presented. The optimal catalyst exhibited high ORR performance in a 0.1 M KOH solution, with a half-wave potential of 0.89 V vs. RHE. Additionally, the catalyst exhibited excellent methanol tolerance and stability. After a 20,000 s continuous operation, no obvious performance decay was observed. When used as the air-electrode catalyst in a zinc-air battery (ZAB), it delivered an outstanding discharging performance, with peak power density and specific capacity as high as 196.3 mW cm-2 and 811.5 mAh gZn-1, respectively. Its high performance and stability endow it with potential in practical and commercial applications as a highly active ORR catalyst. Additionally, it is believed that the presented strategy can be applied to the rational design and fabrication of highly active and stable ORR catalysts for use in eco-friendly and future-oriented energy techniques.

One-Step Synthesis of a Non-Precious-Metal Tris (Fe/N/F)-Doped Carbon Catalyst for Oxygen Reduction Reactions

Advancements in inexpensive, efficient, and durable oxygen reduction catalysts is important for maintaining the sustainable development of fuel cells. Although doping carbon materials with transition metals or heteroatomic doping is inexpensive and enhances the electrocatalytic performance of the catalyst, because the charge distribution on its surface is adjusted, the development of a simple method for the synthesis of doped carbon materials remains challenging. Here, a non-precious-metal tris (Fe/N/F)-doped particulate porous carbon material (2₁P₂-Fe₁-850) was synthesized by employing a one-step process, using 2-methylimidazole, polytetrafluoroethylene, and FeCl₃ as raw materials. The synthesized catalyst exhibited a good oxygen reduction reaction performance with a half-wave potential of 0.85 V in an alkaline medium (compared with 0.84 V of commercial Pt/C). Moreover, it had better stability and methanol resistance than Pt/C. This was mainly attributed to the effect of the tris (Fe/N/F)-doped carbon material on the morphology and chemical composition of the catalyst, thereby enhancing the catalyst's oxygen reduction reaction properties. This work provides a versatile method for the gentle and rapid synthesis of highly electronegative heteroatoms and transition metal co-doped carbon materials.

"Electron Complementation"-Induced Molybdenum Nitride/Co-Anchored Graphitic Carbon Nitride Porous Nanoparticles for Efficient Overall Water Splitting

Maximizing the usable space of electrocatalysts and fine-tuning the interface geometry as well as the electronic structure to facilitate hydrogen and oxygen evolution reactions (HER and OER) have always been the focus of research. Herein, a homogeneous porous nanoparticle construction strategy was proposed, in which molybdenum nitride (Mo₂N) particles were prepared by controlled heat treatment of the precursor nanoparticle induced by polyethylene glycol, and the Mo₂N/Co-C₃N₄ heterostructure with a pore size of about 1.13 nm was obtained by compounding Co-anchored graphitic carbon nitride. In particular, exploring the change of charge distribution at the interface based on the principle of "electron complementation" shows that under the regulation of nitrogen with high electronegativity, the affinity of active site Co to oxygenated species in the OER process and the adsorption as well as cleavage ability of HER reactants in the active site were effectively optimized. Thus, Mo₂N/Co-C₃N₄ not only inherits the functions of each component, but also provides an ideal heterogeneous interface for exhibiting impressive bifunctional activity, which only needs 100 and 210 mV to deliver 10 mA cm^-2 for the HER and OER, respectively. In addition, the Mo₂N/Co-C₃N₄ catalyst also demonstrates high overall water splitting stability with a slight current decrease after 95 h. Manipulating the electronic structure of multiple sites by constructing electronically complementary interfaces may provide another avenue to develop highly active catalysts for overall water splitting and other applications.

Cu/Co/CoS2 embedded in S,N doped carbon as highly-efficient oxygen reduction and evolution electrocatalyst for rechargeable zinc-air batteries

In order to improve the retarded oxygen reduction and evolution reaction (ORR/OER) in rechargeable metal-air cells in electrochemical energy conversion systems, constructing multiphase nanostructured catalysts is an alternative strategy, where...

Advanced Zinc-Air Batteries with Free-Standing Hierarchical Nanostructures of the Air Cathode for Portable Applications

It is today advanced that the development of a free-standing (binderless) air cathode via direct growth of nonprecious metal electrocatalysts onto the surface of the conductive collector would be a cutting-edge strategy to reduce the interfacial resistance, improve the mechanical stability, and reduce the final weight and the cost of manufacturing. Here, for Zn-air batteries (ZABs), we propose an innovative binderless noble-metal-free hierarchical nanostructured bifunctional air cathode in which high-density MnO_x nanorods (NRs) are directly grown on carbon nanotubes (CNTs) themselves synthesized on a microfibrous carbon paper (CP) substrate. All carbon/MnO_x air cathodes achieved specific capacities very close to the theoretical value of 820 mAh g_Zn^-1. A very stable voltage gap between the charge and discharge processes along hundred cycles was obtained, demonstrating the stability and good bifunctional electrocatalytic activities of these cathodes toward the oxygen reduction reaction/oxygen evolution reaction in a real ZAB device. As a proof-of-concept for handheld electronic applications, a ZAB assembled with CP/MnO_x NRs as the air electrode and a Zn plate anode operated a timer for 14 days successfully, whereas two ZAB-based CNTs/MnO_x cathodes connected in series powered a 2 V light-emitting diode (LED) bulb and a 3 V multimeter. The proposed strategy and results may pave the way for the rational design of hierarchical free-standing bifunctional electrocatalysts for ZABs, other metal-air batteries, and fuel cells.

Electrocatalytic Oxygen Evolution Reaction in Acidic Conditions: Recent Progress and Perspectives

The electrochemical oxygen evolution reaction (OER) is an important half-cell reaction in many renewable energy conversion and storage technologies, including electrolyzers, nitrogen fixation, CO₂ reduction, metal-air batteries, and regenerative fuel cells. Among them, proton exchange membrane (PEM)-based devices exhibit a series of advantages, such as excellent proton conductivity, high durability, and good mechanical strength, and have attracted global interest as a green energy device for transport and stationary sectors. Nevertheless, with a view to rapid commercialization, it is urgent to develop highly active and acid-stable OER catalysts for PEM-based devices. In this Review, based on the recent advances in theoretical calculation and in situ/operando characterization, the OER mechanism in acidic conditions is first discussed in detail. Subsequently, recent advances in the development of several types of acid-stable OER catalysts, including noble metals, non-noble metals, and even metal-free OER materials, are systematically summarized. Finally, the current key issues and future challenges for materials used as acidic OER catalysis are identified and potential future directions are proposed.

Constructing Porous Carbon Electrocatalysts from Cobalt Complex-Decorated Micelles of Mesoporous Silica for Oxygen Reduction/Evolution Reaction

The construction of a porous carbon structure with a high specific surface area is conducive to enhanced electrocatalytic activity due to the accessibility of active sites and improvement of the mass transfer. Herein, we explored the possibility of using micelles of mesoporous silica (MCM-48) as the carbon source to generate porous carbon under the confinement of MCM-48 channels. The complexes formed by Co²⁺ and 4,4'-bipyridine were in situ incorporated into the micelles to derive Co-related active sites (Co-N_x, Co, and Co₃O₄) for catalyzing the oxygen reduction reaction (ORR) and oxygen evolution reaction (OER). After pyrolysis in the N₂ atmosphere and subsequent removal of the MCM-48 skeleton, the target porous carbon electrocatalyst was obtained, which exhibited promising performance for both ORR and OER and has great potential as the cathode material for Zn-air battery application. This work not only confirms the effectiveness of using the micelles of MCM-48 as the carbon source for preparing the porous carbon materials, but also provides a new platform for design and synthesis of structurally controllable materials for energy-related electrocatalytic applications.