Water-Dispersible Triplet-Triplet Annihilation Photon Upconversion Particle: Molecules Integrated in Hydrophobized Two-Dimensional Interlayer Space of Montmorillonite and Their Application for Photocatalysis in the Aqueous Phase

Harnessing Near-Infrared Light for Highly Efficient Photocatalysis

Near-infrared (NIR) light, accounting for approximately 50 % of solar light, cannot directly excite photocatalytic reactions due to its lower energy, which severely restricts the photocatalytic solar energy conversion efficiency and hinders the application of photocatalysis. To overcome this dilemma, some viable strategies have been proposed to harness NIR light for enhancing photocatalytic performance based on material structure, composition, and function designs, and obvious progresses have been witnessed. In this review, the basic principles and representative advances in photocatalyst heterojunction designs (including p-n junctions, S-scheme, Z-scheme, and type-ІІ heterojunctions), photocatalyst composition and function designs (such as preparing rare earth element doped upconversion photocatalysts, rare earth upconversion photocatalytic hybrids and triplet-triplet annihilation upconversion photocatalytic composites), and photothermal-photocatalytic bifunction designs for NIR light utilization are exclusively scrutinized. Meanwhile, the applications of the above-mentioned NIR responsive photocatalyst composites in energy and environmental fields are summarized. Importantly, the challenges and outlooks in the field of NIR light harnessing for efficient photocatalysis are proposed, which may provide theoretical and experimental guidance to those working in solar energy conversion and utilization and other related fields.

Photocatalytic removal of toxic dyes, liquorice and tetracycline wastewaters by a mesoporous photocatalyst under irradiation of different lamps and sunlight

Simple recyclable K₅CoW₁₂O₄₀/TiO₂ was synthesized and used to remove methyl orange, rhodamine B, direct red 16 and crystal violet toxic organic dyes, liquorice industrial wastewater and tetracycline (TC) as an antibiotic. Photoactivity of the catalyst was checked out under irradiation of various lamps (such as 18 W fluorescent, 300 W Xenon, LED and IR lamps). The best efficiency was obtained by fluorescent lamp at catalyst loading of 3 g/L, initial pH of 5, initial dye concentration of 5 ppm, complete degradation was achieved after 30 min contact time. Mechanistic investigation showed that·O₂ radicals and h⁺ are majorly responsible for photodegradation in this process. Electrochemical investigation, Nyquist, Bode, Mott-Schottky, Tauc plots and photoluminescence proved that using this photocatalyst delay the electron-hole recombination, increase the lifetime of excited electron, extend light absorption to visible region and improve the light absorption capacity. This photocatalyst work well under winter sunlight. Also 97% and 84% dye removal was obtained for liquorice with 300 and 1000 COD at optimal condition. This catalyst showed similar activity for TC wastewater. Photocatalyst was characterized by FE-SEM, EDX, AFM, FT-IR, XRD, PL, DRS, EIS, BJH and BET.

Application of aluminosilicate clay mineral-based composites in photocatalysis

Aluminosilicate clay mineral (ACM) is a kind of typical raw materials that used widely in manufacturing industry owing to the abundant reserve and low-cost exploring. In past two decades, in-depth understanding on unique layered structure and abundant surface properties endows ACM in the emerging research and application fields. In field of solar-chemical energy conversion, ACM has been widely used to support various semiconductor photocatalysts, forming the composites and achieving efficient conversion of reactants under sunlight irradiation. To date, classic ACM such as kaolinite and montmorillonite, loaded with semiconductor photocatalysts has been widely applied in photocatalysis. This review summaries the recent works on ACM-based composites in photocatalysis. Focusing on the properties of surface and layered structure, we elucidate the different features in the composition with various functional photocatalysts on two typical kinds of ACM, i.e., type 1:1 and type 2:1. Not only large surface area and active surface hydroxyl group assist the substrate adsorption, but also the layered structure provides more space to enlarge the application of ACM-based photocatalysts. Besides, we overview the modifications on ACM from both external surface and the inter-layer space that make the formation of composites more efficiently and boost the photo-chemical process. This review could inspire more upcoming design and synthesis for ACM-based photocatalysts, leading this kind of economic and eco-friendly materials for more practical application in the future.

Versatile, stable, and air-tolerant triplet–triplet annihilation upconversion block copolymer micelles

A versatile, stable, and highly air-tolerant triplet–triplet annihilation up-conversion system based on block copolymer micelles was designed and fabricated.

Thermally Activated Upconversion with Metal-Free Sensitizers Enabling Exceptional Anti-Stokes Shift and Anti-counterfeiting Application

Photochemical upconversion (UC) via triplet-triplet annihilation (TTA) has attracted considerable attention for its potential applications in solar energy conversion, photocatalysis, and bioimaging. Achieving a large anti-Stokes shift in photochemical UC is appealing but still a great challenge, especially for purely organic sensitizers. Here, we develop solid-state TTA UC systems with metal- and heavy atom-free dyes as the sensitizers, which sensitize the 9,10-diphenylanthracene acceptor through thermally activated triplet-triplet energy transfer. Solid-state UC emission with remarkable anti-Stokes shifts up to 1.10 eV is achieved owing to an evident enthalpy gain by the endothermic sensitization. The solid upconverter shows air-stable UC emission and potentials in dual-mode anti-counterfeiting and encryption applications. The present UC approach involving thermally activated sensitization enabled by purely organic dyes provides a versatile strategy to develop TTA UC materials with large anti-Stokes shift, air-tolerant emission, and environmental compatibility, which would have promising applications in information encryption, photochemical conversion, and bioimaging.

A review of clay based photocatalysts: Role of phyllosilicate mineral in interfacial assembly, microstructure control and performance regulation

Over the past decades, inspired by the outstanding properties of clay minerals such as abundance, low-cost, environmental benignity, high stability, and regularly arranged silica-alumina framework, researchers put much efforts on the interface assembly and surface modification of natural minerals with bare photocatalysts, i.e. TiO₂, g-C₃N₄, ZnO, MoS₂, etc. The clay-based hybrid photocatalysts have resulted in a rich database for their tailor-designed microstructures, characterizations, and environmental-related applications. Therefore, in this study, we took a brief introduction of three representative minerals, i.e. kaolinite, montmorillonite and rectorite, and discussed their basic merits in photocatalysis applications. After that, we summarized the recent advances in construction of stable visible-light driven photocatalysts based on these minerals. The structure-activity relationships between the properties of clay types, pore structure, distribution/dispersion and light absorption, carrier separation efficiency as well as redox performance were illustrated in detail. Such representative information would provide theoretical basis and scientific support for the application of clay based photocatalysts. Finally, we pointed out the major challenges and future directions at the end of this review. Undoubtedly, control and preparation of novel photocatalysts based on clays will continue to witness many breakthroughs in the arena of solar-driven technologies.

Photocatalytic oxygen evolution triggered by photon upconverted emission based on triplet-triplet annihilation

A visible light responsive photocatalyst, Mo-doped BiVO4 (Mo:BVO), was shown to promote oxygen evolution from water in response to photon upconverted emission based on triplet-triplet annihilation (TTA) in the same aqueous dispersion. Composites comprising a triplet sensitizer (Pt(ii) octaethylporphyrin; PtOEP) and a singlet emitter (9,10-diphenylanthracene; DPA) intercalated in a layered clay compound (montmorillonite or saponite) were prepared using a facile but versatile solvothermal method. These composites were capable of converting green incident light (λ = 535 nm) to blue light (λ = 430 nm) even in air. The host layered clay as well as the co-intercalated surfactant evidently functioned as barriers against water and oxygen to prevent the quenching of the active compounds. The TTA upconversion driven photocatalytic oxygen evolution using the aqueous mixture of the dyes-clay composite and particulate photocatalysts can be a potential approach to eliminate the undesired optical losses and thus be a breakthrough for future industrial and large-scale installation in an inexpensive manner.

Tuning the Quantum Dot (QD)/Mediator Interface for Optimal Efficiency of QD-Sensitized Near-Infrared-to-Visible Photon Upconversion Systems

Lead sulfide (PbS) quantum dots (QDs) have shown promising performance as a sensitizer in infrared-to-visible photon upconversion systems. To investigate the key design rules, we compare three PbS-sensitized upconversion systems using three mediator molecules with the same tetracene triplet acceptor at different distances from the QD. Using transient absorption spectroscopy, we directly measure the triplet energy-transfer rates and efficiencies from the QD to the mediator and from the mediator to the emitter. With increasing distance between the mediator and PbS QD, the efficiency of the first triplet energy transfer from the QD to the mediator decreases because of a decrease in the rate of this triplet energy-transfer step, while the efficiency of the second triplet energy transfer from the mediator to the emitter increases because of a reduction in the QD-induced mediator triplet state decay. The latter effect is a result of the slow rate constant of the second triplet energy-transfer process, which is 3 orders of magnitude slower than the diffusion-limited value. The combined results lead to a net decrease of the steady-state upconversion quantum yield with distance, which could be predicted by our kinetic model. Our result shows that the QD/mediator interface affects both the first and second triplet energy transfer processes in the photon upconversion system, and the QD/mediator distance has an opposite effect on the efficiencies of the first and second triplet energy transfer. These findings provide important insight for the further rational improvement of the overall efficiency of QD-based upconversion systems.

Leaping across the visible range: near-infrared-to-violet photon upconversion employing a silyl-substituted anthracene

The first example of near-infrared (NIR, λ > 700 nm)-to-violet (λ < 450 nm) photon upconversion based on triplet–triplet annihilation is achieved by developing a silyl-substituted anthracene violet emitter with a low triplet energy level.