Stable Lithium Deposition Enabled by an Acid-Treated g-C3N4 Interface Layer for a Lithium Metal Anode

Conductive Iodine-Doped Red Phosphorus Enabled Dendrite-Free Lithium Deposition on MXene Matrix

The highest theoretical capacity and lowest redox potential of lithium metal make lithium-based batteries the "holy grail" of the next-generation batteries. However, the uncontrollable dendrite growth and infinite volume change of lithium seriously hinder the real-world implementation of lithium-based batteries. Herein, a flexible MXene@iodine-doped red phosphorus (MXene@RP) paper with iodine-doped red phosphorous particles evenly distributed on the surface and interlayer of MXene matrix is designed by a simple vapor condensation reduction approach. The MXene@RP paper can be used as an efficient matrix to enable dendrite-free lithium deposition. On the one hand, the iodine doping alleviates the low conductivity shortcoming of red phosphorus, making it facilitate homogeneous lithium nucleation, thus promoting uniform lithium deposition and suppressing dendrite growth. On the other hand, the unique layered structure of conductive MXene paper provides ion transport channels and free spaces for lithium loading, alleviating the volume change induced structural damage. As a result, the MXene@RP paper with preloaded lithium exhibits long-term cycling stability. Particularly, a full cell based on Li-MXene@RP anode can maintain 81.4% of the initial capacity after 600 cycles at 4 C. The MXene@RP-based anode increases the potential applications of MXene and provides a guide for the design of dendrite-free lithium hosts.

CNT/PVDF Composite Coating Layer on Cu with a Synergy of Uniform Current Distribution and Stress Releasing for Improving Reversible Li Plating/Stripping

The uncontrollable formation of polymorphous Li deposits, e.g., whiskers, mosses, or dendrites resulting from nonuniform interfacial current distribution and internal stress release in the upward direction on the conventional current collector (e.g., Cu foil) of Li metal rechargeable batteries with a lithium-metal-free negatrode (LMFRBs), leads to rapid performance degradation or serious safety problems. The 3D carbon nanotubes (CNTs) skeleton has been proven to effectively reduce the current density and eliminate the internal accumulated stress. However, remarkable electrolyte decomposition, inherent Li source consumption due to repeated SEI formation, and Li⁺ intercalation in CNTs limit the application of 3D CNTs skeleton. Thus, it is necessary to avoid the side effects of the 3D CNTs skeleton and retain uniform interfacial current distribution and stress mitigation. In this work, we integrate the CNTs network with a soft functional polymer polyvinylidene fluoride (PVDF) to form a relatively dense coating layer on Cu foil, which can shield the contact between the internal surface of the 3D CNTs framework and the electrolyte. Simultaneously, the Li-F-rich SEI resulting from the partial reduction of PVDF with deposited Li and the soft nature of the coating layer release the accumulation of internal stress in the horizontal direction, resulting in mosses/whisker-free Li deposition. Thus, improved Li deposition/dissolution and stable cycling performance of the LMFRBs can be achieved.

Constructing nitrided interfaces for stabilizing Li metal electrodes in liquid electrolytes

Traditional Li ion batteries based on intercalation-type anodes have been approaching their theoretical limitations in energy density. Replacing the traditional anode with metallic Li has been regarded as the ultimate strategy to develop next-generation high-energy-density Li batteries. Unfortunately, the practical application of Li metal batteries has been hindered by Li dendrite growth, unstable Li/electrolyte interfaces, and Li pulverization during battery cycling. Interfacial modification can effectively solve these challenges and nitrided interfaces stand out among other functional layers because of their impressive effects on regulating Li⁺ flux distribution, facilitating Li⁺ diffusion through the solid-electrolyte interphase, and passivating the active surface of Li metal electrodes. Although various designs for nitrided interfaces have been put forward in the last few years, there is no paper that specialized in reviewing these advances and discussing prospects. In consideration of this, we make a systematic summary and give our comments based on our understanding. In addition, a comprehensive perspective on the future development of nitrided interfaces and rational Li/electrolyte interface design for Li metal electrodes is included.

In this perspective, we make a systematic summary and give out our comments on constructing nitrided interfaces for stabilizing Li metal electrodes.

Characterization of Electrodeposited Li Metal by Cryo-Scanning Transmission Electron Microscopy/Electron Energy Loss Spectroscopy

The Li metal anode is a promising key component for next-generation high-energy-density batteries. Understanding the charge/discharge mechanism of Li metal is therefore necessary for the effective utilization of Li metal anodes in commercial batteries. In this study, scanning transmission electron microscopy (STEM) combined with electron energy loss spectroscopy (EELS) was conducted to reveal the chemical state of the Li metal anode surface. Cryogenic techniques and ultramicroelectrodes (UMEs) enabled the observation of electrodeposited Li metal on the nanometer scale. The chemical compositions of several surface layers were revealed by cryo-STEM-EELS analysis, and these measurements gave crucial information regarding the surface layer of the electrodeposited Li metal.

DFT-Guided Design and Fabrication of Carbon-Nitride-Based Materials for Energy Storage Devices: A Review

Carbon nitrides (including CN, C₂N, C₃N, C₃N₄, C₄N, and C₅N) are a unique family of nitrogen-rich carbon materials with multiple beneficial properties in crystalline structures, morphologies, and electronic configurations. In this review, we provide a comprehensive review on these materials properties, theoretical advantages, the synthesis and modification strategies of different carbon nitride-based materials (CNBMs) and their application in existing and emerging rechargeable battery systems, such as lithium-ion batteries, sodium and potassium-ion batteries, lithium sulfur batteries, lithium oxygen batteries, lithium metal batteries, zinc-ion batteries, and solid-state batteries. The central theme of this review is to apply the theoretical and computational design to guide the experimental synthesis of CNBMs for energy storage, i.e., facilitate the application of first-principle studies and density functional theory for electrode material design, synthesis, and characterization of different CNBMs for the aforementioned rechargeable batteries. At last, we conclude with the challenges, and prospects of CNBMs, and propose future perspectives and strategies for further advancement of CNBMs for rechargeable batteries.