Silica Shells/Adhesive Composite Film for Color Doppler Ultrasound Guided Needle Placement

Developing Echogenic Materials as Catheters for Use with Ultrasound

Patients with peripherally inserted central catheters (PICCs) are routinely discharged with the catheters in place. These patients experience complications due to undetected thrombosis or accidental dislodgement, with tracking through limited X-ray imaging. Developing catheters with the capability to be tracked without the need for X-ray imaging would greatly benefit these patients by decreasing patient stress, reducing time to diagnosis, and increasing nursing home capabilities. This study reports on the incorporation of echogenic microspheres into catheters to produce bulk echogenic effects for developments in the field of real-time ultrasound tracking of polymeric medical devices. The impact on elastic modulus, ultrasound contrast, and cytocompatibility of the polymer was analyzed when incorporating up to 10 wt % glass microspheres. Up to this loading level, the elastic modulus was found to remain constant. However, at 10 wt %, extrusion defects due to agglomeration, air bubbles, and shearing were numerous and deemed detrimental to ultrasound imaging. Successful, defect-free samples were produced with 5 wt % microsphere loading and when embedded in a soft tissue phantom revealed a significant increase in the signal-to-noise ratio as compared to the polymer alone. Preliminary results have shown a successful increase in polymer's echogenic properties, without undermining its mechanical and cytocompatibility properties.

Indocyanine green modified silica shells for colon tumor marking

Marking colon tumors for surgery is normally done with the use of India ink. However, non-fluorescent dyes such as India ink cannot be imaged below the tissue surface and there is evidence for physiological complications such as abscess, intestinal perforation and inconsistency of dye injection. A novel infrared marker was developed using FDA approved indocyanine green (ICG) dye and ultrathin hollow silica nanoshells (ICG/HSS). Using a positively charged amine linker, ICG was non-covalently adsorbed onto the nanoparticle surface. For ultra-thin wall 100 nm diameter silica shells, a bimodal ICG layer of < 3 nm is was formed. Conversely, for thicker walls on 2 μm diameter silica shells, the ICG layer was only bound to the outer surface and was 6 nm thick. In vitro testing of fluorescent emission showed the particles with the thinner coating were considerably more efficient, which is consistent with self-quenching reducing emission shown in the thicker ICG coatings. Ex-vivo testing showed that ICG bound to the 100 nm hollow silica shells was visible even under 1.5 cm of tissue. In vivo experiments showed that there was no diffusion of the ICG/nanoparticle marker in tissue and it remained imageable for as long as 12 days.