Fate of the Molecular Ru–Phosphonate Water Oxidation Catalyst under Turnover Conditions

Overcoming the Tradeoff Between Reaction Rate and Overpotential in Dinuclear Cobalt Complex Catalyzed Electrochemical Water Oxidation

This study focuses on enhancing the water oxidation reaction (WOR) efficacy of dinuclear cobalt complex catalysts from both kinetic (turnover frequency, TOF) and thermodynamic (overpotential, η) perspectives. For this purpose, we synthesized six dinuclear cobalt complexes 1-6 comprising non-innocent ligands with different electronically active substituents (-OMe (1), -Me (2), -H (3), -F (4), -Cl (5), and -CN (6)). The electronic effects on the electrochemical WOR under neutral, acidic, and alkaline conditions were investigated experimentally and computationally. X-ray crystallography revealed that the valence state of the cobalt complexes was affected by electronic effects, affording different catalytic potentials, as evidenced by electrochemical measurements. Kinetic and spectroscopic studies confirmed that the synergistic effect of catalyst identity and reaction media changes the reaction mechanism of each catalyst. The WOR performance of 1-6 was tunable through ligand electronics and solvent effects, with the log(TOF)-η analysis highlighting an operational η as low as 40 mV. This study provides valuable insights into optimizing WOR catalysis through molecular design and environmental tuning.

Adaptive water oxidation catalysis on a carboxylate-sulfonate ligand with low onset potential

A water oxidation catalyst Ru-bcs (bcs = 2,2'-bipyridine-6'-carboxylate-6-sulfonate) with a hybrid ligand was reported. Ru-bcs utilizes the electron-donating properties of carboxylate ligands and the on-demand coordination feature of sulfonate ligands to enable a low onset potential of 1.21 V vs. NHE and a high TOF over 1000 s-1 at pH 7. The adaptive chemistry uncovered in this work provides new perspectives for developing molecular catalysts with high efficiency under low driving forces.

Bioinspired Active Site with a Coordination-Adaptive Organosulfonate Ligand for Catalytic Water Oxidation at Neutral pH

Many enzymes use adaptive frameworks to preorganize substrates, accommodate various structural and electronic demands of intermediates, and accelerate related catalysis. Inspired by biological systems, a Ru-based molecular water oxidation catalyst containing a configurationally labile ligand [2,2':6',2″-terpyridine]-6,6″-disulfonate was designed to mimic enzymatic framework, in which the sulfonate coordination is highly flexible and functions as both an electron donor to stabilize high-valent Ru and a proton acceptor to accelerate water dissociation, thus boosting the catalytic water oxidation performance thermodynamically and kinetically. The combination of single-crystal X-ray analysis, various temperature NMR, electrochemical techniques, and DFT calculations was utilized to investigate the fundamental role of the self-adaptive ligand, demonstrating that the on-demand configurational changes give rise to fast catalytic kinetics with a turnover frequency (TOF) over 2000 s^-1, which is compared to oxygen-evolving complex (OEC) in natural photosynthesis.

Oxygen Evolution/Reduction Reaction Catalysts: From In Situ Monitoring and Reaction Mechanisms to Rational Design

The oxygen evolution reaction (OER) and oxygen reduction reaction (ORR) are core steps of various energy conversion and storage systems. However, their sluggish reaction kinetics, i.e., the demanding multielectron transfer processes, still render OER/ORR catalysts less efficient for practical applications. Moreover, the complexity of the catalyst-electrolyte interface makes a comprehensive understanding of the intrinsic OER/ORR mechanisms challenging. Fortunately, recent advances of in situ/operando characterization techniques have facilitated the kinetic monitoring of catalysts under reaction conditions. Here we provide selected highlights of recent in situ/operando mechanistic studies of OER/ORR catalysts with the main emphasis placed on heterogeneous systems (primarily discussing first-row transition metals which operate under basic conditions), followed by a brief outlook on molecular catalysts. Key sections in this review are focused on determination of the true active species, identification of the active sites, and monitoring of the reactive intermediates. For in-depth insights into the above factors, a short overview of the metrics for accurate characterizations of OER/ORR catalysts is provided. A combination of the obtained time-resolved reaction information and reliable activity data will then guide the rational design of new catalysts. Strategies such as optimizing the restructuring process as well as overcoming the adsorption-energy scaling relations will be discussed. Finally, pending current challenges and prospects toward the understanding and development of efficient heterogeneous catalysts and selected homogeneous catalysts are presented.

Metamorphic oxygen-evolving molecular Ru and Ir catalysts

Today sustainable and clean energy conversion strategies are based on sunlight and the use of water as a source of protons and electrons, in a similar manner as it happens in Photosystem II. To achieve this, the charge separation state induced by light has to be capable of oxidising water by 4 protons and 4 electrons and generating molecular oxygen. This oxidation occurs by the intermediacy of a catalyst capable of finding low-energy pathways via proton-coupled electron transfer steps. The high energy involved in the thermodynamics of water oxidation reaction, coupled with its mechanistic complexity, is responsible for the difficulty of discovering efficient and oxidatively robust molecules capable of achieving such a challenging task. A significant number of Ru coordination complexes have been identified as water oxidation catalysts (WOCs) and are among the best understood from a mechanistic perspective. In this review, we describe the catalytic performance of these complexes and focus our attention on the factors that influence their performance during catalysis, especially in cases where a detailed mechanistic investigation has been carried out. The collective information extracted from all the catalysts studied allows one to identify the key features that govern the complex chemistry associated with the catalytic water oxidation reaction. This includes the stability of trans-O-Ru-O groups, the change in coordination number from CN6 to CN7 at Ru high oxidation states, the ligand flexibility, the capacity to undergo intramolecular proton transfer, the bond strain, the axial ligand substitution, and supramolecular effects. Overall, combining all this information generates a coherent view of this complex chemistry.

Dinuclear Cobalt Complexes for Homogeneous Water Oxidation: Tuning Rate and Overpotential through the Non-Innocent Ligand

In this study, dinuclear cobalt complexes (1 and 2) featuring bis(benzimidazole)pyrazolide-type ligands (H₂ L and Me₂ L) were prepared and evaluated as molecular electrocatalysts for water oxidation. Notably, 1 bearing a non-innocent ligand (H₂ L) displayed faster catalytic turnover than 2 under alkaline conditions, and the base dependence of water oxidation and kinetic isotope effect analysis indicated that the reaction mediated by 1 proceeded by a different mechanism relative to 2. Spectroelectrochemical, cold-spray ionization mass spectrometric and computational studies found that double deprotonation of 1 under alkaline conditions cathodically shifted the catalysis-initiating potential and further altered the turnover-limiting step from nucleophilic water attack on (H₂ L)Co^III ₂ (superoxo) to deprotonation of (L)Co^III ₂ (OH)₂ . The rate-overpotential analysis and catalytic Tafel plots showed that 1 exhibited a significantly higher rate than previously reported Ru-based dinuclear electrocatalysts at similar overpotentials. These observations suggest that using non-innocent ligands is a valuable strategy for designing effective metal-based molecular water oxidation catalysts.

The impact of secondary coordination sphere engineering on water oxidation reactivity catalysed by molecular ruthenium complexes: a next-generation approach to develop advanced catalysts

Water oxidation is the bottleneck for producing hydrogen from the water-splitting reaction. Developing efficient water oxidation catalysts (WOCs) has recently been of paramount interest. Ruthenium-based WOCs have gained much attention due to their enriched redox property, robust nature, and superior catalytic performances compared to other transition metal-based molecular catalysts. The performance of a catalyst is highly dependent on the design of the ligand framework. In nature, the secondary coordination sphere around the active site of a metalloenzyme plays a vital role in catalysis. This principle has been employed in the recent development of efficient catalysts. With the aid of secondary interactions, some landmark Ru-based WOCs, producing remarkable turnover frequencies (TOFs) in the order of 10⁴ s^-1, have been developed. In this account, we have discussed the underlying chemistry related to the effect of secondary interactions (such as hydrogen-bonding, π-π stacking, electrostatic interaction, hydrophobic-hydrophilic environment, etc.) on the kinetics of the water oxidation reaction catalysed by molecular Ru-complexes. The use of secondary interactions (such as π-π and C-H⋯π) in anchoring the molecular catalyst onto the solid conducting surface has also been discussed. We aim to provide a brief overview of the positive impact of outer-sphere engineering on water oxidation reactivity, which may offer guidelines for developing the next generation of advanced catalysts.

Catalytic water oxidation by an in situ generated ruthenium nitrosyl complex bearing a bipyridine-bis(alkoxide) ligand

Oxidative degradation and transformation of catalysts are commonly observed in water oxidation by molecular catalysts, especially when a highly oxidizing reagent such as (NH₄)₂[Ce(NO₃)₆] [Ce(IV)] is used. We report herein the synthesis of a ruthenium(III) complex bearing an oxidative resistant bipyridine-bis(alkoxide) ligand, [Ru(bdalk)(pic)₂]⁺ (1, H₂bdalk = 2,2'-([2,2'-bipyridine]-6,6'-diyl)bis(propan-2-ol), pic = 4-picoline) as a water oxidation catalyst (WOC). A ruthenium(II) nitrosyl complex [Ru(Hbdalk)(NO)(pic)₂]²⁺ (3) was also formed during the water oxidation process by 1/Ce(IV), and was isolated and structurally characterized. Complex 3 was found to be an active WOC, with the nitrosyl group remaining intact during water oxidation.

Trends in computational molecular catalyst design

Computational methods have emerged as a powerful tool to augment traditional experimental molecular catalyst design by providing useful predictions of catalyst performance and decreasing the time needed for catalyst screening. In this perspective, we discuss three approaches for computational molecular catalyst design: (i) the reaction mechanism-based approach that calculates all relevant elementary steps, finds the rate and selectivity determining steps, and ultimately makes predictions on catalyst performance based on kinetic analysis, (ii) the descriptor-based approach where physical/chemical considerations are used to find molecular properties as predictors of catalyst performance, and (iii) the data-driven approach where statistical analysis as well as machine learning (ML) methods are used to obtain relationships between available data/features and catalyst performance. Following an introduction to these approaches, we cover their strengths and weaknesses and highlight some recent key applications. Furthermore, we present an outlook on how the currently applied approaches may evolve in the near future by addressing how recent developments in building automated computational workflows and implementing advanced ML models hold promise for reducing human workload, eliminating human bias, and speeding up computational catalyst design at the same time. Finally, we provide our viewpoint on how some of the challenges associated with the up-and-coming approaches driven by automation and ML may be resolved.