Ag Size/Structure-Dependent Effect on Low-Temperature Selective Catalytic Oxidation of NH3 over Ag/MnO2

Enhanced water resistance mechanism in Ag-Hollandite for catalytic ozone decomposition

Catalytic ozone (O3) decomposition at ambient temperature is an efficient method to mitigate O3 pollution. However, practical application is hindered by the poor water resistance of catalysts. Herein, Ag-Hollandite (Ag-HMO) with varying Ag+ content was synthesized. Catalysts with more Ag+ exhibited improved efficiency and water-resistance, with the optimal one maintaining 98% O3 conversion at 70% relative humidity (RH) within 8 h. Physicochemical characterizations revealed that Ag+ had entered the tunnel of OMS-2, facilitating oxygen species removal. Notably, enhanced H2O desorption and the complete inhibition of chemisorbed water formation on Ag-HMO were the primary reasons for its high-efficiency O3 conversion across a wide humidity range. The underlying mechanism arises from the charge redistribution induced by the Ag-O interaction within the tunnel, which reduces acidity and modulates hydrophilicity. This study aims to contribute insights for designing catalysts with higher water-resistance.

Regulating Electron Metal-Support Interaction to Suppress N2O Formation in the Selective Catalytic Oxidation of Ammonia

N2O is a common byproduct in the selective catalytic oxidation of ammonia, and its generation often needs to be inhibited due to its strong greenhouse effect. In this paper, using Ag/ZSO-Y as a model catalyst, the N2O selectivity was reduced by 30% through modulation of the electron metal-support interaction. The results demonstrate that the work function of the support can be regulated by the content of the doping element. As the Zr content increases in SnO2, the work function of the support decreases. Moreover, there is a positive correlation between the charge transfer amount and the work function of the support. A series of in situ DRIFTS and density functional theory calculations revealed that the -NO and -N reactions are the primary pathways for N2O formation. By adjustment of the work function of the support through varying the Zr doping level, the electronic structure of Ag NPs was further tuned, resulting in an increased reaction energy barrier for -NO and -N reactions, effectively suppressing N2O formation.

Ammonia Abatement via Selective Oxidation over Electron-Deficient Copper Catalysts

Selective catalytic ammonia-to-dinitrogen oxidation (NH₃-SCO) is highly promising for the abatement of NH₃ emissions from flue gas purification devices. However, there is still a lack of high-performance and cost-effective NH₃-SCO catalysts for real applications. Here, highly dispersed, electron-deficient Cu-based catalysts were fabricated using nitrogen-doped carbon nanotubes (NCNT) as support. In NH₃-SCO catalysis, the Cu/NCNT outperformed Cu supported on N-free CNTs (Cu/OCNT) and on other types of supports (i.e., activated carbon, Al₂O₃, and zeolite) in terms of activity, selectivity to the desired product N₂, and H₂O resistance. Besides, Cu/NCNT demonstrated a better structural stability against oxidation and a higher NH₃ storage capacity (in the presence of H₂O vapor) than Cu/OCNT. Quasi in situ X-ray photoelectron spectroscopy revealed that the surface N species facilitated electron transfer from Cu to the NCNT support, resulting in electron-deficient Cu catalysts with superior redox properties, which are essential for NH₃-SCO catalysis. By temperature-programmed surface reaction studies and systematic kinetic measurements, we unveiled that the NH₃-SCO reaction over Cu/NCNT proceeded via the internal selective catalytic reaction (i-SCR) route; i.e., NH₃ was oxidized first to NO, which then reacted with NH₃ and O₂ to form N₂ and H₂O. This study paves a new route for the design of highly active, H₂O-tolerant, and low-cost Cu catalysts for the abatement of slip NH₃ from stationary emissions via selective oxidation to N₂.

Promoting the effects of CuSO4 on N2 selectivity in selective catalytic oxidation of ammonia over Pt/TiO2 catalysts

The NH3-SCO reaction mechanism over a Pt/TiO2 catalyst was transferred into the i-SCR mechanism after adding CuSO4, and thus the formation of N2 was promoted.

Progress on Noble Metal-Based Catalysts Dedicated to the Selective Catalytic Ammonia Oxidation into Nitrogen and Water Vapor (NH3-SCO)

A recent development for selective ammonia oxidation into nitrogen and water vapor (NH3-SCO) over noble metal-based catalysts is covered in the mini-review. As ammonia (NH3) can harm human health and the environment, it led to stringent regulations by environmental agencies around the world. With the enforcement of the Euro VI emission standards, in which a limitation for NH3 emissions is proposed, NH3 emissions are becoming more and more of a concern. Noble metal-based catalysts (i.e., in the metallic form, noble metals supported on metal oxides or ion-exchanged zeolites, etc.) were rapidly found to possess high catalytic activity for NH3 oxidation at low temperatures. Thus, a comprehensive discussion of property-activity correlations of the noble-based catalysts, including Pt-, Pd-, Ag- and Au-, Ru-based catalysts is given. Furthermore, due to the relatively narrow operating temperature window of full NH3 conversion, high selectivity to N2O and NOx as well as high costs of noble metal-based catalysts, recent developments are aimed at combining the advantages of noble metals and transition metals. Thus, also a brief overview is provided about the design of the bifunctional catalysts (i.e., as dual-layer catalysts, mixed form (mechanical mixture), hybrid catalysts having dual-layer and mixed catalysts, core-shell structure, etc.). Finally, the general conclusions together with a discussion of promising research directions are provided.