Direct Quantification of Damaged Nucleotides in Oligonucleotides Using an Aerolysin Single Molecule Interface

Nanopore-Based Fingerprint Immunoassay Based on Rolling Circle Amplification and DNA Fragmentation

In recent years, nanopore-based sequencers have become robust tools with unique advantages for genomics applications. However, progress toward applying nanopores as highly sensitive, quantitative diagnostic tools has been impeded by several challenges. One major limitation is the insufficient sensitivity of nanopores in detecting disease biomarkers, which are typically present at pM or lower concentrations in biological fluids, while a second limitation is the general absence of unique nanopore signals for different analytes. To bridge this gap, we have developed a strategy for nanopore-based biomarker detection that utilizes immunocapture, isothermal rolling circle amplification, and sequence-specific fragmentation of the product to release multiple DNA reporter molecules for nanopore detection. These DNA fragment reporters produce sets of nanopore signals that form distinctive fingerprints, or clusters. This fingerprint signature therefore allows the identification and quantification of biomarker analytes. As a proof of concept, we quantify human epididymis protein 4 (HE4) at low pM levels in a few hours. Future improvement of this method by integration with a nanopore array and microfluidics-based chemistry can further reduce the limit of detection, allow multiplexed biomarker detection, and further reduce the footprint and cost of existing laboratory and point-of-care devices.

Simultaneous Dual-Site Identification of 5mC/8oG in DNA Triplex Using a Nanopore Sensor

DNA triplex participates in delivering site-specific epigenetic modifications critical for the regulation of gene expression. Among these marks, 5mC with 8oG functions comprehensively on gene expression. Recently, few research studies have emphasized the necessity of incorporation detection of 5mC with 8oG using one DNA triplex at the same time. Herein, DNA triplex structure was designed and tailored for the site-specific identification of 5mC with 8oG by means of nanopore electroanalysis. The identification was associated with the distinguishable current modulation types caused by DNA unzipping through the nanopore in an electrical field. Results demonstrated that the epigenetic modification proximity to the latch zone or constriction area of the nanopore enables differentiation of modification series at single nucleotide resolution in one DNA triplex, at both physiological and mildly acidic environment. In addition, our nanopore method enables the kinetic and thermodynamic studies to calculate the free energy of modified DNA triplex with applied potentials. Gibbs' energy provided the direct evidence that the DNA triplex with these epigenetic modifications is more stable in acidic environment. Considering modified DNA functions significantly in gene expression, the presented method may provide future opportunities to understand incorporating epigenetic mechanisms of many dysregulated biological processes on the basis of accurate detection.

Dynamic Chemistry Interactions: Controlled Single-Entity Electrochemistry

Single-entity electrochemistry (SEE) provides powerful means to measure single cells, single particles, and even single molecules at the nanoscale by diverse well-defined interfaces. The nanoconfined electrode interface has significantly enhanced structural, electrical, and compositional characteristics that have great effects on the assay limitation and selectivity of single-entity measurement. In this Perspective, after introducing the dynamic chemistry interactions of the target and electrode interface, we present a fundamental understanding of how these dynamic interactions control the features of the electrode interface and thus the stochastic and discrete electrochemical responses of single entities under nanoconfinement. Both stochastic single-entity collision electrochemistry and nanopore electrochemistry as examples in this Perspective explore how these interactions alter the transient charge transfer and mass transport. Finally, we discuss the further challenges and opportunities in SEE, from the design of sensing interfaces to hybrid spectro-electrochemical methods, theoretical models, and advanced data processing.

Development of the DNA-based biosensors for high performance in detection of molecular biomarkers: More rapid, sensitive, and universal

The molecular biomarkers are molecules that are closely related to specific physiological states. Numerous molecular biomarkers have been identified as targets for disease diagnosis and biological research. To date, developing highly efficient probes for the precise detection of biomarkers has become an attractive research field which is very important for biological and biochemical studies. During the past decades, not only the small chemical probe molecules but also the biomacromolecules such as enzymes, antibodies, and nucleic acids have been introduced to construct of biosensor platform to achieve the detection of biomarkers in a highly specific and highly efficient way. Nevertheless, improving the performance of the biosensors, especially in clinical applications, is still in urgent demand in this field. A noteworthy example is the Corona Virus Disease 2019 (COVID-19) that breaks out globally in a short time in 2020. The COVID-19 was caused by the virus called SARS-CoV-2. Early diagnosis is very important to block the infection of the virus. Therefore, during these months scientists have developed dozens of methods to achieve rapid and sensitive detection of the virus. Nowadays some of these new methods have been applied for producing the commercial detection kit and help people against the disease worldwide. DNA-based biosensors are useful tools that have been widely applied in the detection of molecular biomarkers. The good stability, high specificity, and excellent biocompatibility make the DNA-based biosensors versatile in application both in vitro and in vivo. In this paper, we will review the major methods that emerged in recent years on the design of DNA-based biosensors and their applications. Moreover, we will also briefly discuss the possible future direction of DNA-based biosensors design. We believe this is helpful for people interested in not only the biosensor field but also in the field of analytical chemistry, DNA nanotechnology, biology, and disease diagnosis.

Full Width at Half Maximum of Nanopore Current Blockage Controlled by a Single-Biomolecule Interface

A biological nanopore is one of the predominant single-molecule approaches as a result of its controllable single-biomolecule interface, which could reflect the "intrinsic" information on an individual molecule in a label-free way. Because the current blockage is normally treated as the most important parameter for nanopore identification of every single molecule, the fluctuation of current blockage for certain types of molecules, defined as full width at half maximum (fwhm) of current blockage, actually owns a dominant influence on nanopore resolution. Therefore, controlling the fwhm of current blockage of molecules is critical for the sensing capability of the nanopore. Here, taking an aerolysin nanopore as a model, by precisely controlling the functional group in this single-biomolecule interface, we could narrow the fwhm of nanopore current blockage for DNA identification and prolong the duration inside the nanopore. Moreover, a substantial correlation between fwhm of current blockage and duration is established, showing a non-monotonic variation. Besides, the mechanism is also clarified with studying the detailed current blockage events. This proposed correlation is further demonstrated to be applied uniformly across different mutant aerolysins for a certain DNA. This study proposes a new strategy for regulating molecular sensing from the duration of the analyte, which could guide the resolution of heterogeneity analysis using nanopores.

Is the Volume Exclusion Model Practicable for Nanopore Protein Sequencing?

The nanopore approach holds the possibility for achieving single-molecule protein sequencing. However, ongoing challenges still remain in the biological nanopore technology, which aims to identify 20 natural amino acids by reading the ionic current difference with the traditional current-sensing model. In this paper, taking aerolysin nanopores as an example, we calculate and compare the current blockage of each of 20 natural amino acids, which are all far from producing a detectable current blockage difference. Then, we propose a modified solution conductivity of σ' in the traditional volume exclusion model for nanopore sensing of a peptide. The σ' value describes the comprehensive result of ion mobility inside a nanopore, which is related to but not limited to nanopore-peptide interactions, and the positions, orientations, and conformations of peptides inside the nanopore. The nanopore experiments of a short peptide (VQIVYK) in wild type and mutant nanopores further demonstrate that the traditional volume exclusion model is not enough to fully explain the current blockage contribution and that many other factors such as enhanced nanopore-peptide interactions could contribute to a dominant part of the current change. This modified sensing model provides insights into the further development of nanopore protein sequencing methods.

Recent advances in biological nanopores for nanopore sequencing, sensing and comparison of functional variations in MspA mutants

Biological nanopores are revolutionizing human health by the great myriad of detection and diagnostic skills. Their nano-confined area and ingenious shape are suitable to investigate a diverse range of molecules that were difficult to identify with the previous techniques. Additionally, high throughput and label-free detection of target analytes instigated the exploration of new bacterial channel proteins such as Fragaceatoxin C (FraC), Cytolysin A (ClyA), Ferric hydroxamate uptake component A (FhuA) and Curli specific gene G (CsgG) along with the former ones, like α-hemolysin (αHL), Mycobacterium smegmatis porin A (MspA), aerolysin, bacteriophage phi 29 and Outer membrane porin G (OmpG). Herein, we discuss some well-known biological nanopores but emphasize on MspA and compare the effects of site-directed mutagenesis on the detection ability of its mutants in view of the surface charge distribution, voltage threshold and pore-analyte interaction. We also discuss illustrious and latest advances in biological nanopores for past 2-3 years due to limited space. Last but not the least, we elucidate our perspective for selecting a biological nanopore and propose some future directions to design a customized nanopore that would be suitable for DNA sequencing and sensing of other nontrivial molecules in question.

Instrumentational implementation for parallelized nanopore electrochemical measurements

Nanopore electrochemistry, as one of the promising tools for single molecule sensing, has proved its capability in DNA sequencing and protein analysis. To achieve a high resolution for obtaining molecular information, the nanopore electrochemical technique not only urgently requires an appropriate nanopore sensing interface with atomic resolution but also requires advanced instrumentation and its related data processing methods. In order to reveal the fundamental biological process and process the point-of-care diagnosis, it is necessary to use a nanopore sensing instrument with a high amperometric and temporal resolution as well as high throughput. The development of the instrumentation requires multi-disciplinary collaboration involving preparing a sensitive nanopore interface, low-noise circuit design, and intelligent data analysis. In this review, we have summarized the recent improvements in the nanopore sensing interface as well as discussed the higher throughput achieved by nanopore arrays and intelligent nanopore data analysis methods. The parallelized nanopore instrumentation could be popularized to all ranges of single-molecule applications.

Translocation of a looped polymer threading through a nanopore

Recent experiments reported that the complicated translocation dynamics of a looped DNA chain through a nanopore can be detected by ionic current blockade profiles. Inspired by the experimental results, we systematically study the translocation dynamics of a looped polymer, formed by three building blocks of a loop in the middle and two tails of the same length connected with the loop, by using Langevin dynamics simulations. Based on two entering modes (tail-leading and loop-leading) and three translocation orders (loop-tail-tail, tail-loop-tail, and tail-tail-loop), the translocation of the looped polymer is classified into six translocation pathways, corresponding to different current blockade profiles. The probabilities of the six translocation pathways are dependent on the loop length, polymer length, and pore radius. Moreover, the translocation times of the entire polymer and the loop are investigated. We find that the two translocation times show different dependencies on the translocation pathways and on the lengths of the loop and the entire polymer.

Real-time sensing of neurotransmitters by functionalized nanopores embedded in a single live cell

Interface between neuron cells and biomaterials is the key to real-time sensing, transmitting and manipulating of neuron activities, which are the long-term pursue of scientists and gain intense research focus recently. It is of great interest to develop a sensor with exquisite sensitivity and excellent selectivity for real-time monitoring neurotransmitters transport through single live cell. Sensing techniques including electrode-based methods, optogenetics, and nanowire cell penetration systems have been developed to monitor the neuron activities. However, their biocompatibilities remain a challenge. Protein nanopores with membrane compatibility and lumen tunability provide real-time, single-molecule sensitivities for biosensing of DNA, RNA, peptides and small molecules. In this study, an engineered protein nanopore MspA (Mycobacterium smegmatis porin A) through site-directed mutation with histidine selectively bind with Cu²⁺ in its internal lumen. Chelation of neurotransmitters such as L-glutamate (L-Glu), dopamine (DA) and norepinephrine (NE) with the Cu²⁺ creates specific current signals, showing different transient current blockade and dwell time in single channel electrophysiological recording. Furthermore, the functionalized M2MspA-N91H nanopores have been embedded in live HEK293T cell membrane for real-time, in situ monitoring of extracellular L-glutamate translocating through the nanopore. This biomimetic neurotransmitter nanopore has provided a new platform for future development of neuron sensors, drug carrier and artificial synapse.

The translocation dynamics of the polymer through a conical pore: Non-stuck, weak-stuck, and strong-stuck modes

The external voltage-driven polymer translocation through a conical pore (with a large opening at the entry and a small tip at the exit) is studied by using the Langevin dynamics simulation in this paper. The entire translocation process is divided into an approaching stage and a threading stage. First, the approaching stage starts from the polymer entering the large opening and ends up at a terminal monomer reaching the pore tip. In this stage, the polymer will undergo the conformation adjustment to fit the narrowed cross-sectional area of the pore, leading to three approaching modes: the non-stuck mode with a terminal monomer arriving at the pore tip smoothly, the weak-stuck mode for the polymer stuck inside the pore for a short duration with minor conformational adjustments, and the strong-stuck mode with major conformational changes and a long duration. The approaching times (the duration of the approaching stage) of the three approaching modes show different behavior as a function of the pore apex angle. Second, the threading stage describes that the polymer threads through the pore tip with a linear fashion. In this stage, an increase in the apex angle causes the reduction of the threading time (the duration of the threading stage) due to the increase in the driving force with the apex angle at the tip. Moreover, we also find that with the increase in the apex angle or the polymer length, the polymer threading dynamics will change from the quasi-equilibrium state to the non-equilibrium state.

Next-generation DNA damage sequencing

Cellular DNA is constantly chemically altered by exogenous and endogenous agents. As all processes of life depend on the transmission of the genetic information, multiple biological processes exist to ensure genome integrity. Chemically damaged DNA has been linked to cancer and aging, therefore it is of great interest to map DNA damage formation and repair to elucidate the distribution of damage on a genome-wide scale. While the low abundance and inability to enzymatically amplify DNA damage are obstacles to genome-wide sequencing, new developments in the last few years have enabled high-resolution mapping of damaged bases. Recently, a number of DNA damage sequencing library construction strategies coupled to new data analysis pipelines allowed the mapping of specific DNA damage formation and repair at high and single nucleotide resolution. Strikingly, these advancements revealed that the distribution of DNA damage is heavily influenced by chromatin states and the binding of transcription factors. In the last seven years, these novel approaches have revealed new genomic maps of DNA damage distribution in a variety of organisms as generated by diverse chemical and physical DNA insults; oxidative stress, chemotherapeutic drugs, environmental pollutants, and sun exposure. Preferred sequences for damage formation and repair have been elucidated, thus making it possible to identify persistent weak spots in the genome as locations predicted to be vulnerable for mutation. As such, sequencing DNA damage will have an immense impact on our ability to elucidate mechanisms of disease initiation, and to evaluate and predict the efficacy of chemotherapeutic drugs.

Dynamic interaction of fluoroquinolones with magnesium ions monitored using bacterial outer membrane nanopores

Divalent ions are known to have a severe effect on the translocation of several antibiotic molecules into (pathogenic) bacteria. In the present study we have investigated the effect of divalent ions on the permeability of norfloxacin across the major outer membrane channels from E. coli (OmpF and OmpC) and E. aerogenes (Omp35 and Omp36) at the single channel level. To understand the rate limiting steps in permeation, we reconstituted single porins into planar lipid bilayers and analyzed the ion current fluctuations caused in the presence of norfloxacin. Moreover, to obtain an atomistic view, we complemented the experiments with millisecond-long free energy calculations based on temperature-accelerated Brownian dynamics simulations to identify the most probable permeation pathways of the antibiotics through the respective pores. Both, the experimental analysis and the computational modelling, suggest that norfloxacin is able to permeate through the larger porins, i.e., OmpF, OmpC, and Omp35, whereas it only binds to the slightly narrower porin Omp36. Moreover, divalent ions can bind to negatively charged residues inside the porin, reversing the ion selectivity of the pore. In addition, the divalent ions can chelate with the fluoroquinolone molecules and alter their physicochemical properties. The results suggest that the conjugation with either pores or molecules must break when the antibiotic molecules pass the lumen of the porin, with the conjugation to the antibiotic being more stable than that to the respective pore. In general, the permeation or binding process of fluoroquinolones in porins occurs irrespective of the presence of divalent ions, but the presence of divalent ions can vary the kinetics significantly. Thus, a detailed investigation of the interplay of divalent ions with antibiotics and pores is of key importance in developing new antimicrobial drugs.

Retarded Translocation of Nucleic Acids through α-Hemolysin Nanopore in the Presence of a Calcium Flux

Electrophysiological measurement of molecular translocation through a nanopore is the fundamental basis of nanopore sensing. Free translocation of nucleic acids however is normally so fast that the identities of the compounds are not clearly resolvable. Inspired by recent progress in fluorescence imaging based nanopore sensing, we found that during electrophysiology measurements, translocation of nucleic acids is also retarded whenever a calcium flux around the pore vicinity is established. The residence time of nucleic acids has been extended to tens of milliseconds, a result of the strong coupling between nucleic acids and free calcium ions. The methodology presented here is applicable to both DNAs and RNAs and is able to clearly discriminate between different RNA homopolymers. This offers new insights for calcium imaging based nanopore sensing and suggests a new strategy of electrophysiology-based nanopore sensing aimed at a retarded motion of nucleic acids.