Thermodynamic Origin of the Photostability of the Two-Dimensional Perovskite PEA2Pb(I1-x Br x )4

Elucidation of the suppression of photoinduced segregation in 2D mixed halide, A2PbI2Br2: Critical role of A2PbBr4 photostability

2D lead halide perovskites are used to improve device operational stability due to increased environmental stability and reduced ion migration compared to 3D perovskites. However, the relationship between the 2D perovskite stability under illumination and spacer cation is still not well understood. Thus, we examine photoinduced halide segregation (PHS) in different 2D mixed-halide perovskites and show that PHS is suppressed in the materials which have photostable bromide halide phase. As the spacer cations provide the barrier to ion migration in 2D perovskites, PHS would be facilitated by the loss of spacer cations through their interactions with various mobile oxidized halide species, resulting in organic ammonium deprotonation and spacer cation vacancy formation. The existence of a photostable A2PbBr4 phase, which does not exhibit spacer cation loss, results in the suppression of PHS in 2D mixed halide perovskites due to reduced spacer vacancy formation and consequently reduced halide ion migration under illumination.

Implementing Lattice and Energy Level Matching to Optimize Buried Interfaces for High-Performance Perovskite Solar Cells

In n-i-p type perovskite solar cells (PSCs), mismatches in energy level and lattice at the buried interface is highly detrimental to device performance. Here, thin PbS interconnect layer in situ coating on the SnO2 surface is grown. The function of PbS at the interface is different from the commonly used function of crystalline seeds in perovskite bulk. The theoretical calculation show that it helps construct an interconnect structure of SnO2/PbS/Perovskite with matched energy level and lattice. This not only increases conductivity of SnO2, but also upshifts Fermi energy levels (EF) of both SnO2 and buried perovskite due to charge transfer and perovskite's internal defect changes. Such a suitable energy level arrangement ensures a better energy level match at the interface, favoring efficient charge transfer and less open circuit voltage (Voc) loss. Additionally, in situ PL reveals that the template effect of PbS enable perovskite grain to grow bottom-up because of their highly matched lattice parameters. This growth mode optimizes buried interface contact and crystallinity of perovskite. Ultimately, after PbS modification, a remarkable power conversion efficiency (PCE) exceeding 24% and better device stability are obtained. This work demonstrates an effective interconnect layers strategy to realize ideal interface contact toward high-performance PSCs.

Study of Thermalization Mechanisms of Hot Carriers in BABr-Added MAPbBr3 for the Top Layer of Four-Junction Solar Cells

The hot carrier multi-junction solar cell (HCMJC) is an advanced-concept solar cell with a theoretical efficiency greater than 65%. It combines the advantages of hot carrier solar cells and multi-junction solar cells with higher power conversion efficiency (PCE). The thermalization coefficient (Qth) has been shown to slow down by an order of magnitude in low-dimensional structures, which will significantly improve PCE. However, there have been no studies calculating the Qth of MAPbBr3 quantum dots so far. In this work, the Qth values of MAPbBr3 quantum dots and after BABr addition were calculated based on power-dependent steady-state photoluminescence (PD-SSPL). Their peak positions in PD-SSPL increased from 2.37 to 2.71 eV after adding BABr. The fitting shows that, after adding BABr, the Qth decreased from 2.64 ± 0.29 mW·K-1·cm-2 to 2.36 ± 0.25 mW·K-1·cm-2, indicating a lower relaxation rate. This is because BABr passivates surface defects, slowing down the carrier thermalization process. This work lays the foundation for the theoretical framework combining perovskite materials, which suggests that the appropriate passivation of BABr has the potential to further reduce Qth and make MAPbBr3 QDs with BABr modified more suitable as the top absorption layer of HCMJCs.

Atmospheric Exposure Triggers Light-Induced Degradation in 2D Lead-Halide Perovskites

Quasi-2D perovskites have been pivotal in recent efforts to stabilize perovskite solar cells. Despite the stability boost provided when these materials are introduced in perovskite solar cells, little is known about the intrinsic light and environmental stability of quasi-2D perovskites. In this study, we characterize the photostability of exfoliated quasi-2D perovskite single crystals in air using photoluminescence, infrared, X-ray fluorescence, and energy-dispersive X-ray spectroscopy. Photoexcitation leads to severe material loss with oxygen as a prerequisite for material breakdown. The effect can be traced to the formation of reactive oxygen species, as demonstrated by increases in the photostability under oxygen-free conditions. We show the effect of combined passivation steps, showcasing the stability enhancement offered by 2D-capping layers in combination with an oxygen-free atmosphere. Our results reveal that the stability of illuminated quasi-2D perovskites depends critically on oxygen exposure, highlighting the importance of oxygen-blocking passivation strategies for stable 2D perovskite-based devices.

Heterostructures via a Solution-Based Anion Exchange in Microcrystalline 2D Layered Metal-Halide Perovskites

Layered perovskites consist of stacks of inorganic semiconducting metal-halide octahedra lattices sandwiched between organic layers with typically dielectric behavior. The in-plane confinement of electrical carriers in such two-dimensional metal halide perovskites drives a large range of appealing electronic properties, such as strong exciton binding, anisotropic charge diffusion, and polarization-directionality. Heterostructures provide additional control on carrier diffusion and localization, and in-plane heterojunctions are interesting because of the associated high charge mobility. Here, this work demonstrates a versatile solution-based approach to fabricate in-plane heterostructures with different halide composition in two-dimensional lead-halide perovskite microcrystals. This leads to spatially separated halide phases with different band gap and light emission. Interestingly, the composition of the exchanged phase and the morphology of the phase boundary depends on the exchange route, which can be related to the preferred localization of the halides at the equatorial or axial octahedra positions that either leads to dissolution and recrystallization of the octahedra lattice (for bromide to iodide), or allows for ion diffusion within the lattice (for iodide to bromide). These detailed insights on the ion exchange processes in layered perovskites will stimulate the development of heterostructures that can be tailored for different applications such as photocatalysis, energy storage, and light emission.

Mixed ionic-electronic conduction in Ruddlesden-Popper and Dion-Jacobson layered hybrid perovskites with aromatic organic spacers

The understanding of mixed ionic-electronic conductivity in hybrid perovskites has enabled major advances in the development of optoelectronic devices based on this class of materials. While recent investigations revealed the potential of using dimensionality effects for various applications, the implication of this strategy on mixed conductivity is yet to be established. Here, we present a systematic analysis of mixed conduction in layered (2D) hybrid halide perovskite films based on 1,4-phenylenedimethylammonium (PDMA) and benzylammonium (BzA) organic spacers in (PDMA)PbI4 and (BzA)2PbI4 compositions, forming representative Dion-Jacobson (DJ) and Ruddleson-Popper (RP) phases, respectively. Electrochemical measurements of charge transport parallel to the layered structure reveal mixed ionic-electronic conduction with electronic transport mediated by electron holes in both DJ and RP phases. In comparison to the 3D perovskites, larger activation energies for both ionic and electronic conductivities are observed which result in lower absolute values. While the layered perovskites still allow for a relatively efficient exchange of iodine with the gas phase, the lower change of conductivity on the variation of the iodine partial pressure compared with 3D perovskites is consistent with the exchange affecting only a fraction of the film, with implications for the encapsulating efficacy of these materials. We complement the analysis with a demonstration of the superior thermal stability of DJ structures compared to their RP counterparts. This can guide future explorations of dimensionality and composition to control the transport and stabilization properties of 2D perovskite films.

Axial-Equatorial Halide Ordering in Layered Hybrid Perovskites from Isotropic-Anisotropic 207 Pb NMR

Bandgap-tuneable mixed-halide 3D perovskites are of interest for multi-junction solar cells, but suffer from photoinduced spatial halide segregation. Mixed-halide 2D perovskites are more resistant to halide segregation and are promising coatings for 3D perovskite solar cells. The properties of mixed-halide compositions depend on the local halide distribution, which is challenging to study at the level of single octahedra. In particular, it has been suggested that there is a preference for occupation of the distinct axial and equatorial halide sites in mixed-halide 2D perovskites. 207 Pb NMR can be used to probe the atomic-scale structure of lead-halide materials, but although the isotropic 207 Pb shift is sensitive to halide stoichiometry, it cannot distinguish configurational isomers. Here, we use 2D isotropic-anisotropic correlation 207 Pb NMR and relativistic DFT calculations to distinguish the [PbX6 ] configurations in mixed iodide-bromide 3D FAPb(Br1-x Ix )3 perovskites and 2D BA2 Pb(Br1-x Ix )4 perovskites based on formamidinium (FA+ ) and butylammonium (BA+ ), respectively. We find that iodide preferentially occupies the axial site in BA-based 2D perovskites, which may explain the suppressed halide mobility.

Synergy of 3D and 2D Perovskites for Durable, Efficient Solar Cells and Beyond

Three-dimensional (3D) organic-inorganic lead halide perovskites have emerged in the past few years as a promising material for low-cost, high-efficiency optoelectronic devices. Spurred by this recent interest, several subclasses of halide perovskites such as two-dimensional (2D) halide perovskites have begun to play a significant role in advancing the fundamental understanding of the structural, chemical, and physical properties of halide perovskites, which are technologically relevant. While the chemistry of these 2D materials is similar to that of the 3D halide perovskites, their layered structure with a hybrid organic-inorganic interface induces new emergent properties that can significantly or sometimes subtly be important. Synergistic properties can be realized in systems that combine different materials exhibiting different dimensionalities by exploiting their intrinsic compatibility. In many cases, the weaknesses of each material can be alleviated in heteroarchitectures. For example, 3D-2D halide perovskites can demonstrate novel behavior that neither material would be capable of separately. This review describes how the structural differences between 3D halide perovskites and 2D halide perovskites give rise to their disparate materials properties, discusses strategies for realizing mixed-dimensional systems of various architectures through solution-processing techniques, and presents a comprehensive outlook for the use of 3D-2D systems in solar cells. Finally, we investigate applications of 3D-2D systems beyond photovoltaics and offer our perspective on mixed-dimensional perovskite systems as semiconductor materials with unrivaled tunability, efficiency, and technologically relevant durability.

Light-Induced Halide Segregation in 2D and Quasi-2D Mixed-Halide Perovskites

Photoinduced halide segregation hinders widespread application of three-dimensional (3D) mixed-halide perovskites. Much less is known about this phenomenon in lower-dimensional systems. Here, we study photoinduced halide segregation in lower-dimensional mixed iodide-bromide perovskites (PEA2MA n-1Pb n (Br x I1-x )3n+1, with PEA+: phenethylammonium and MA+: methylammonium) through time-dependent photoluminescence (PL) spectroscopy. We show that layered two-dimensional (2D) structures render additional stability against the demixing of halide phases under illumination. We ascribe this behavior to reduced halide mobility due to the intrinsic heterogeneity of 2D mixed-halide perovskites, which we demonstrate via 207Pb solid-state NMR. However, the dimensionality of the 2D phase is critical in regulating photostability. By tracking the PL of multidimensional perovskite films under illumination, we find that while halide segregation is largely inhibited in 2D perovskites (n = 1), it is not suppressed in quasi-2D phases (n = 2), which display a behavior intermediate between 2D and 3D and a peculiar absence of halide redistribution in the dark that is only induced at higher temperature for the quasi-2D phase.