Facile Synthesis and Study of Microporous Catalytic Arene-Norbornene Annulation-Tröger's Base Ladder Polymers for Membrane Air Separation

Cobalt-Catalyzed Domino Transformations via Enantioselective C-H Activation/Nucleophilic [3 + 2] Annulation toward Chiral Bridged Bicycles

Selective synthesis of chiral bridged (hetero)bicyclic scaffolds via asymmetric C-H activation constitutes substantial challenges due to the multiple reactivities of strained bicyclic structures. Herein, we develop the domino transformations through an unprecedented cobalt-catalyzed enantioselective C-H activation/nucleophilic [3 + 2] annulation with symmetrical bicyclic alkenes. The methods offer straightforward access to a wide range of chiral molecules bearing [2.2.1]-bridged bicyclic cores with four and five consecutive stereocenters in a single step. Two elaborate salicyloxazoline (Salox) ligands were synthesized based on the rational design and mechanistic understanding. The well-defined chiral pockets generated from asymmetric coordination around the trivalent cobalt catalyst direct the orientation of bicyclic alkenes, leading to excellent enantioselectivity.

Escape from Palladium: Nickel-Catalyzed Catellani Annulation

While Catellani reactions have become increasingly important for arene functionalizations, they have been solely catalyzed by palladium. Here we report the first nickel-catalyzed Catellani-type annulation of aryl triflates and chlorides to form various benzocyclobutene-fused norbornanes in high efficiency. Mechanistic studies reveal a surprising outer-sphere concerted metalation/deprotonation pathway during the formation of the nickelacycle, as well as the essential roles of the base and the triflate anion. The reaction shows a broad functional group tolerance and enhanced regioselectivity compared to the corresponding palladium catalysis.

Design of Microstructure-Engineered Polymers for Energy and Environmental Conservation

With the ever-growing demand for sustainability, designing polymeric materials using readily accessible feedstocks provides potential solutions to address the challenges in energy and environmental conservation. Complementing the prevailing strategy of varying chemical composition, engineering microstructures of polymer chains by precisely controlling their chain length distribution, main chain regio-/stereoregularity, monomer or segment sequence, and architecture creates a powerful toolbox to rapidly access diversified material properties. In this Perspective, we lay out recent advances in utilizing appropriately designed polymers in a wide range of applications such as plastic recycling, water purification, and solar energy storage and conversion. With decoupled structural parameters, these studies have established various microstructure-function relationships. Given the progress outlined here, we envision that the microstructure-engineering strategy will accelerate the design and optimization of polymeric materials to meet sustainability criteria.

Mitigation of Physical Aging of Polymeric Membrane Materials for Gas Separation: A Review

The first commercial hollow fiber and flat sheet gas separation membranes were produced in the late 1970s from the glassy polymers polysulfone and poly(vinyltrimethyl silane), respectively, and the first industrial application was hydrogen recovery from ammonia purge gas in the ammonia synthesis loop. Membranes based on glassy polymers (polysulfone, cellulose acetate, polyimides, substituted polycarbonate, and poly(phenylene oxide)) are currently used in various industrial processes, such as hydrogen purification, nitrogen production, and natural gas treatment. However, the glassy polymers are in a non-equilibrium state; therefore, these polymers undergo a process of physical aging, which is accompanied by the spontaneous reduction of free volume and gas permeability over time. The high free volume glassy polymers, such as poly(1-trimethylgermyl-1-propyne), polymers of intrinsic microporosity PIMs, and fluoropolymers Teflon^® AF and Hyflon^® AD, undergo significant physical aging. Herein, we outline the latest progress in the field of increasing durability and mitigating the physical aging of glassy polymer membrane materials and thin-film composite membranes for gas separation. Special attention is paid to such approaches as the addition of porous nanoparticles (via mixed matrix membranes), polymer crosslinking, and a combination of crosslinking and addition of nanoparticles.

Dibenzomethanopentacene-Based Polymers of Intrinsic Microporosity for Use in Gas-Separation Membranes

Dibenzomethanopentacene (DBMP) is shown to be a useful structural component for making Polymers of Intrinsic Microporosity (PIMs) with promise for making efficient membranes for gas separations. DBMP-based monomers for PIMs are readily prepared using a Diels-Alder reaction between 2,3-dimethoxyanthracene and norbornadiene as the key synthetic step. Compared to date for the archetypal PIM-1, the incorporation of DBMP simultaneously enhances both gas permeability and the ideal selectivity for one gas over another. Hence, both ideal and mixed gas permeability data for DBMP-rich co-polymers and an amidoxime modified PIM are close to the current Robeson upper bounds, which define the state-of-the-art for the trade-off between permeability and selectivity, for several important gas pairs. Furthermore, long-term studies (over ≈3 years) reveal that the reduction in gas permeabilities on ageing is less for DBMP-containing PIMs relative to that for other high performing PIMs, which is an attractive property for the fabrication of membranes for efficient gas separations.

Norbornane-based covalent organic frameworks for gas separation

Covalent organic frameworks (COFs) have emerged as a new class of crystalline porous materials with distinct structural features, such as uniform pore distribution, tunable architecture, and modifiable skeletons. COFs hold significant promise for application in gas separation because of their high Brunauer-Emmett-Teller surface area and narrow pore-size distribution, which enable selective separation. The porosity and separation performance of COFs have been finely tuned by structurally modifying the starting materials. Along this direction, for the first time, we prepared W-shaped diamines by catalytic arene-norbornene annulation (CANAL) and then treated them with trialdehyde (Tp) to synthesize novel β-ketoenamine-linked norbornane-based COFs, i.e., ND-COF-1 and ND-COF-2, via a solvothermal Schiff-base condensation approach. The pore interior was decorated with methyl groups attached to the norbornane unit of the COF skeleton. Both COFs exhibited high chemical stability in different organic solvents and acidic media. Additionally, they showed high CO₂/N₂ selectivity compared with those of previously reported COFs. Moreover, their CH₄/N₂ separation efficiency was investigated, and the results revealed that ND-COF-1 is more selective than ND-COF-2, which could be attributed to the less hindered pathway offered to methane gas molecules by the framework pore.

Synthesis, microstructures, and gas separation performance of norbornyl bis-benzocyclobutene-Tröger’s base polymers derived from pure regioisomers

Chain configuration significantly influences the microstructures and gas separation performance of polymers of intrinsic microporosity. Herein, pure regioisomers of norbornyl bis-benzocyclobutene-containing (N2BC) diamines, i.e. anti-CANAL-4-MeNH2, syn-CANAL-4-MeNH2, anti-CANAL-2-Me2NH2, and syn-CANAL-2-Me2NH2, were...

Macromolecular Design for Oxygen/Nitrogen Permselective Membranes-Top-Performing Polymers in 2020

Oxygen/nitrogen permselective membranes play particularly important roles in fundamental scientific studies and in a number of applications in industrial chemistry, but have not yet fulfilled their full potential. Organic polymers are the main materials used for such membranes because of the possibility of using sophisticated techniques of precise molecular design and their ready processability for making thin and large self-supporting membranes. However, since the difference in the properties of oxygen and nitrogen gas molecules is quite small, for example, their kinetic diameters are 3.46 Å and 3.64 Å, respectively, the architectures of the membrane macromolecules should be designed precisely. It has been reported often that oxygen permeability (PO2) and oxygen permselectivity (α = PO2/PN2) have trade-off relationships for symmetric membranes made from pure polymers. Some empirical upper bound lines have been reported in (ln α - ln PO2) plots since Robeson reported an upper bound line in 1991 for the first time. The main purpose of this review is to discuss suitable macromolecular structures that produce excellent oxygen/nitrogen permselective membranes. For this purpose, we first searched extensively and intensively for papers which had reported α and PO2 values through symmetric dense membranes from pure polymers. Then, we examined the chemical structures of the polymers showing the top performances in (ln α - ln PO2) plots, using their aged performances. Furthermore, we also explored progress in the molecular design in this field by comparing the best polymers reported by 2013 and those subsequently found up to now (2020) because of the rapid outstanding growth in this period. Finally, we discussed how to improve α and PO2 simultaneously on the basis of reported results using not only symmetric membranes of pure organic polymers but also composite asymmetric membranes containing various additives.

Selective removal of toxic organic dyes using Trӧger base-containing sulfone copolymers made from a metal-free thiol-yne click reaction followed by oxidation

Three copolymers TCP1–3 bearing Trӧger's base (TB) units intercalated with various thioether groups were synthesized using a catalyst-free thiol-yne click reaction. TCP1–3 display excellent solubility in common organic solvents allowing for their structural, and photophysical characterization. The thioether groups in TCP1–3 were selectively oxidized into their respective sulfone derivatives under mild oxidation reaction conditions affording the postmodified copolymers TCP4–6. Investigation of organic dye uptake from water by TCP1–6 proved their efficiency as selective adsorbents removing up to 100% of the cationic dye methylene blue (MEB) when compared to anionic dyes, such as Congo red (CR), methyl orange (MO) and methyl blue (MB). The sulfone-containing copolymers TCP4–6 display superior and faster MEB removal efficiencies with respect to their corresponding synthons TCP1–3.

Copolymers TCP1–3 with Trӧger's base units and aryl thioether groups were made via a click reaction. Selective oxidation of the thioethers into sulfone groups afforded TCP4–6 which display up to 100% removal efficiency of methylene blue from water.

Substituted polynorbornene membranes: a modular template for targeted gas separations

This perspective focuses on substituted polynorbornenes as a promising modular platform to access advanced gas separation membranes, and highlights their synthetic versatility and robust performance.