Enhanced Light Absorption in Porous Particles for Ultra-NIR-Sensitive Biomaterials

CO2-laser-induced carbonization of calcium chloride-treated chitin nanopaper for applications in solar thermal heating

Remarkable progress has been made in the development of carbonized chitin nanofiber materials for various functional applications, including solar thermal heating, owing to their N- and O-doped carbon structures and sustainable nature. Carbonization is a fascinating process for the functionalization of chitin nanofiber materials. However, conventional carbonization techniques require harmful reagents, high-temperature treatment, and time-consuming processes. Although CO₂ laser irradiation has progressed as a facile and second-scale high-speed carbonization process, CO₂-laser-carbonized chitin nanofiber materials and their applications have not yet been explored. Herein, we demonstrate the CO₂-laser-induced carbonization of chitin nanofiber paper (denoted as chitin nanopaper) and investigate the solar thermal heating performance of the CO₂-laser-carbonized chitin nanopaper. While the original chitin nanopaper was inevitably burned out by CO₂ laser irradiation, CO₂-laser-induced carbonization of the chitin nanopaper was achieved by pretreatment with calcium chloride as a combustion inhibitor. The CO₂-laser-carbonized chitin nanopaper exhibits excellent solar thermal heating performance; its equilibrium surface temperature under 1 sun irradiation is 77.7 °C, which is higher than those of the commercial nanocarbon films and the conventionally carbonized bionanofiber papers. This study paves the way for the high-speed fabrication of carbonized chitin nanofiber materials and their application in solar thermal heating toward the effective utilization of solar energy as heat.

Highly Porous SnO2/TiO2 Heterojunction Thin-Film Photocatalyst Using Gas-Flow Thermal Evaporation and Atomic Layer Deposition

Highly porous heterojunction films of SnO2/TiO2 were prepared using gas-flow thermal evaporation followed by atomic layer deposition (ALD). Highly porous SnO2 was fabricated by introducing an inert gas, Ar, during thermal evaporation. To build heterogeneous structures, the TiO2 layers were conformally deposited on porous SnO2 with a range of 10 to 100 cycles by means of ALD. The photocatalytic properties for different TiO2 thicknesses on the porous SnO2 were compared using the degradation of methylene blue (MB) under UV irradiation. The comparisons showed that the SnO2/TiO2-50 heterostructures had the highest photocatalytic efficiency. It removed 99% of the MB concentration, and the decomposition rate constant (K) was 0.013 min−1, which was approximately ten times that of the porous SnO2. On the other hand, SnO2/TiO2-100 exhibited a lower photocatalytic efficiency despite having a TiO2 layer thicker than SnO2/TiO2-50. After 100 cycles of TiO2 ALD deposition, the structure was transferred from the heterojunction to the core–sell structure covered with TiO2 on the porous SnO2, which was confirmed by TEM analysis. Since the electrons photogenerated by light irradiation were separated into SnO2 and produced reactive oxygen, O2−, the heterojunction structure, in which SnO2 was exposed to the surface, contributed to the high performance of the photocatalyst.

Smart gating porous particles as new carriers for drug delivery

The design of smart drug delivery carriers has recently attracted great attention in the biomedical field. Smart carriers can specifically respond to physical and chemical changes in their environment, such as temperature, photoirradiation, ultrasound, magnetic field, pH, redox species, and biomolecules. This review summarizes recent advances in the integration of porous particles and stimuli-responsive gatekeepers for effective drug delivery. Their unique structural properties play an important role in facilitating the diffusion of drug molecules and cell attachment. Various techniques for fabricating porous materials, with their major advantages and limitations, are summarized. Smart gatekeepers provide advanced functions such as "open-close" switching by functionalized stimuli-responsive polymers on a particle's pores. These controlled delivery systems enable drugs to be targeted at specific rates, time programs, and sites of the human body. The gate structures, gating mechanisms, and controlled release mechanisms of each trigger are detailed. Current ongoing research and future trends in targeted drug delivery, tissue engineering, and regenerative medicine applications are highlighted.

Highly Efficient Photothermal Conversion of Ti3C2Tx/Ionic Liquid Gel Pen Ink for Smoothly Writing Ultrasensitive, Wide-Range Detecting, and Flexible Thermal Sensors

Photothermal conversion behavior has a vital application to disease therapy, water purification, or uncontacted heaters. The fabrication of high-performance photothermal conversion materials especially for near-infrared (NIR) light and microstructures has attracted a great deal of attention. Among numerous substances, MXene as a new type of 2D material with semi-metallic and unique electromagnetic properties presents a broader absorption of light and even a typical plasmonic absorption near the NIR-I area (808 nm), which has made it suitable for photothermal conversion. Here, we propose a facile approach for preparing a Ti₃C₂T_x/ionic liquid ink with a high photothermal conversion efficiency. The as-prepared ink has showed good wettability of various substrates as well as the high sensitivity of 808 nm NIR light irradiation and a wide range of thermal variation. After packing the ink into a gel pen refill, the flexible thermal chips could be easily obtained just by pen writing on the soft surface with the designed size, which also have become an optimal candidate for the thermal alarm system.

A low-cost and reusable photothermal membrane for solar-light induced anti-bacterial regulation

In this work, a simple, low-cost, and applicable strategy for preparing membranes which allow photothermal conversion and have excellent anti-bacterial ability is proposed.

Radical Cation Initiated Surface Polymerization on Photothermal Rubber for Smart Antifouling Coatings

Biofouling on surfaces of various materials has attracted considerable attention in biomedical and marine industries. Surface grafting based on covalent surface-initiated polymerization offers a popular route to address this problem by providing diverse robust polymer coatings capable of preventing the biofouling in complex environments. However, the existing methods for synthesizing polymer coatings are complicated and rigorous, or require special catalysts, greatly limiting their practical applications. In this work, a radical-cation-based surface-initiated polymerization protocol to graft the surface of darkened trans-polyisoprene (TPI) rubber with a thermo-responsive smart polymer, poly(N-isopropylacrylamide) (PNIPAM), through a simple iodine doping process is reported. A series of characterizations were performed to provide adequate evidence to confirm the successful grafting. Combining the thermal sensitivity of PNIPAM with the photothermal conversion ability of the darkened rubber, efficient bacteria-killing and antifouling capabilities were successfully achieved as a result of temperature-controlled iodine release and switchable amphiphilicity of PNIPAM.

Photothermal effect of Ag nanoparticles deposited over poly(amidoamine) grafted carbon nanotubes

This paper illustrates the potential of Ag nanoparticles based nanocomposites to use as effective agents in photothermal therapy apart from their traditional employment as antimicrobial materials. Herein an Near- Infrared active photothermal agent was fabricated by deposition of Ag nanoparticles over aromatic poly(amidoamine) grafted carbon nanotubes. Thus prepared CNTs-PAMAM-Ag possessed strong photothermal effect under exposure to 980 nm laser system and prominent photothermal stability. The photothermal conversion efficiency of CNTs-PAMAM-Ag was found to be higher than readily used Au and CuS based photothermal agents. The photothermal effect of CNTs-PAMAM-Ag was substantial in presence of 980 nm laser compared to 808 nm laser and a linear dependence of photothermal effect on its concentration was identified. The maximum temperature attained by CNTs-PAMAM-Ag during assessment of its photothermal effect was about 66.0 °C, which is significantly higher than the survival temperature level of cancer cells. So CNTs-PAMAM-Ag could be a promising photothermal agent to apply in future photothermal hyperthermia therapy to treat cancer. Moreover CNTs-PAMAM-Ag can synchronous trigger by a single wavelength (980 nm) laser system, so it could simplify the future therapeutic process.

Porous Electrospun Fibers with Self-Sealing Functionality: An Enabling Strategy for Trapping Biomacromolecules

Stimuli-responsive porous polymer materials have promising biomedical application due to their ability to trap and release biomacromolecules. In this work, a class of highly porous electrospun fibers is designed using polylactide as the polymer matrix and poly(ethylene oxide) as a porogen. Carbon nanotubes (CNTs) with different concentrations are further impregnated onto the fibers to achieve self-sealing functionality induced by photothermal conversion upon light irradiation. The fibers with 0.4 mg mL-1 of CNTs exhibit the optimum encapsulation efficiency of model biomacromolecules such as dextran, bovine serum albumin, and nucleic acids, although their photothermal conversion ability is slightly lower than the fibers with 0.8 mg mL-1 of CNTs. Interestingly, reversible reopening of the surface pores is accomplished with the degradation of PLA, affording a further possibility for sustained release of biomacromolecules after encapsulation. Effects of CNT loading on fiber morphology, structure, thermal/mechanical properties, degradation, and cell viability are also investigated. This novel class of porous electrospun fibers with self-sealing capability has great potential to serve as an enabling strategy for trapping/release of biomacromolecules with promising applications in, for example, preventing inflammatory diseases by scavenging cytokines from interstitial body fluids.

Effects of stereo-regularity on the single-chain mechanics of polylactic acid and its implications on the physical properties of bulk materials

The material properties of polylactic acid (PLA) are largely determined by its stereo-regularity (tacticity). To find out the origin at the molecular level, the single-chain mechanics of poly-l-lactic acid (PLLA) and poly-d,l-lactide (PDLLA) were comparatively investigated by single-molecule atomic force microscopy (AFM). At a low concentration, PLLA adopted a random-coil conformation in a good solvent. At a high concentration, however, the PLLA chain can be induced into a helix, which consumed additional energy during unfolding by further stretching. Due to the random arrangement of l- and d-repeating units in the PDLLA chain, PDLLA adopts a random-coil conformation at all concentrations. The difference in single-chain mechanics of PLLA and PDLLA at high concentrations may be the cause of their different macroscopic properties. This is the first report to reveal the stereo-regularity-dependent mechanics of a polymer at the single-molecule level, which may help to bridge the gap between understanding single-molecule and materials properties.

Formulating Polyethylene Glycol as Supramolecular Emulsifiers for One-Step Double Emulsions

One-step double emulsions via only one-step emulsification are leading to an attractive branch of emulsion research studies owing to the ease of preparation and reduced surfactant numbers. In addition to controlling the oil/water ratio, exploiting emulsifiers with desirable amphiphilicity that can stabilize both the inner and outer water/oil interfaces is crucial to the formation of one-step double emulsions. In particular, new emulsifiers with saving laborious efforts are highly preferred in consideration of low cost and practical applications. In this work, a commonly used homopolymer, polyethylene glycol (PEG), was attempted as emulsifiers to prepare emulsions via one-step emulsification. PEG is generally considered as a hydrophilic polymer and always anchored with a hydrophobic polymer to make the copolymer amphiphilic. In the water-chloroform binary system, PEG itself exhibits amphiphilic performance and tailors the formation of single emulsions or double W/O/W emulsions on the dependence of the oil/water ratio and the PEG concentration. A possible mechanism as explained by dissipative particle dynamics simulation was proposed to demonstrate the amphiphilic feature and emulsification capability of PEG. The amphiphilicity of PEG was further tuned by interacting with iodine as a result of the formation of a supramolecular complex, which, in turn, led to the conversion from single emulsions to O/W/O double emulsions. It is believed that this line of research provides inspiration for the preparation of controllable emulsions through supramolecular routes.

A Reversed Photosynthesis-like Process for Light-Triggered CO2 Capture, Release, and Conversion

Materials for CO₂ capture have been extensively exploited for climate governance and gas separation. However, their regeneration is facing the problems of high energy cost and secondary CO₂ contamination. Herein, a reversed photosynthesis-like process is proposed, in which CO₂ is absorbed in darkness while being released under light illumination. The process is likely supplementary to natural photosynthesis of plants, in which, on the contrary, CO₂ is released during the night. Remarkably, the material used here is able to capture 9.6 wt.% CO₂ according to its active component. Repeatable CO₂ capture at room temperature and release under light irradiation ensures its convenient and cost-effective regeneration. Furthermore, CO₂ released from the system is successfully converted into a stable compound in tandem with specific catalysts.

Rapid Self-Assembly of Block Copolymers for Flower-Like Particles with High Throughput

The self-assembly of block copolymers has evolved into a foremost bottom-up approach for building polymeric materials. Historical challenges exist within this lively field, including the scalability and elegant simplicity of self-assembled aggregates with predictable structures. Here, we report a generally applicable strategy for the rapid self-assembly of poly(ethylene glycol)-block-poly(l-lactic acid) with the help of a single oil-in-water emulsion. A kind of flower-like polymer particle with filamentous surface branches is rapidly formed after removing the oil phase from the emulsion system. Moreover, the dimension of the branched filaments and the spherical internal core can be controlled through regulating the block ratio and the emulsification conditions. In particular, we propose an explosion theory as a balance between phase separation and interchain interaction for explaining the formation of the branched structures of the flower-like particles. The particles with high throughput are further functionalized with polypyrrole for their use in enhanced photoelectric-sensing applications.

Tuning Amphiphilicity of Particles for Controllable Pickering Emulsion

Pickering emulsions with the use of particles as emulsifiers have been extensively used in scientific research and industrial production due to their edge in biocompatibility and stability compared with traditional emulsions. The control over Pickering emulsion stability and type plays a significant role in these applications. Among the present methods to build controllable Pickering emulsions, tuning the amphiphilicity of particles is comparatively effective and has attracted enormous attention. In this review, we highlight some recent advances in tuning the amphiphilicity of particles for controlling the stability and type of Pickering emulsions. The amphiphilicity of three types of particles including rigid particles, soft particles, and Janus particles are tailored by means of different mechanisms and discussed here in detail. The stabilization-destabilization interconversion and phase inversion of Pickering emulsions have been successfully achieved by changing the surface properties of these particles. This article provides a comprehensive review of controllable Pickering emulsions, which is expected to stimulate inspiration for designing and preparing novel Pickering emulsions, and ultimately directing the preparation of functional materials.

Near infrared light responsive hybrid nanoparticles for synergistic therapy

A near infrared (NIR) light responsive chromophore 7-(diethylamino)-4-(hydroxymethyl)-2H-chromen-2-one (DEACM) was synthesized and incorporated to β-cyclodextrins with cRGD functionalized poly(ethylene glycol), the amphiphiles were coordinated with Au nanorods or nanoparticles to load anticancer drug doxorubicin (DOX) for fabricating hybrid nanoparticles. The π-π stacking interaction between DEACM and DOX was formed in the hybrid nanoparticles, which contributed to the high drug loading content. The Au nanorods or nanoparticles enhanced the photosolvolysis of DEACM under the irradiation of NIR with 808 nm wavelength and triggered the accelerated drug release from the nanoparticles. The drug loaded hybrid nanoparticles with NIR irradiation exhibited efficient inhibition effect on the proliferation of 4T1 breast cancer cells in vitro. The in vivo anticancer activity study on breast cancer bearing mice revealed that the hybrid nanoparticles containing Au nanorods exhibited excellent anticancer activity under the irradiation of 808 nm wavelength NIR with 800 mW.

Syntheses and biomedical applications of hollow micro-/nano-spheres with large-through-holes

This review mainly discussed the syntheses and biomedical applications of hollow micro-/nano-spheres with large-through-holes in shells.

High-Internal-Phase Emulsion Tailoring Polymer Amphiphilicity towards an Efficient NIR-Sensitive Bacteria Filter

Emulsions having a high internal-phase volume fraction—termed as HIPEs for high internal phase emulsions—are in high demand as templates for functional macroporous materials. Designing molecular surfactants with appropriate amphiphilicity plays a critical role in the HIPE preparation. In this study, successful tailoring of the amphiphilicity of the originally hydrophobic block co-polymer of polystyrene-b-polyvinylpyridine (PS-b-P4VP) is reported. In combination with trifluoroacetic acid, less than 5 wt% of the polymer-CF3COOH system is feasible as a surfactant for HIPE preparation; this is lower than the amounts typically needed for commonly used commercial surfactants. Using the HIPEs as templates, well-defined closed- and open-cell macroporous triacrylate-based monoliths are fabricated simply through the adjustment of the ratio of the water phase to oil phase. After coating the resulting macroporous material with polypyrrole nanoparticles, the system can be exploited as an NIR-sensitive filter for bacteria; it not only excludes oversized bacteria, but it also kills the bacteria with the help of NIR-induced heat.

Hierarchical porous polycaprolactone microspheres generated via a simple pathway combining nanoprecipitation and hydrolysis

We demonstrated a one-pot, soap-free fabrication of porous polycaprolactone microspheres by combining nanoprecipitation and hydrolysis. The obtained porous polycaprolactone microspheres show great advantages for application in drug delivery.