Ultrasonic Bending of Silver Nanowires

Promoting ultrasonic cavitation via Negative-Curvature nanoparticles

It is a challenge to study the nucleation of cavitation bubbles, which critically depends on nanoscale morphological features. Our recent advances in synthesizing colloidal negative-curvature nanoparticles (NGC-NPs) offer a rare opportunity, in comparison to the conventional studies of bulk substrates, where it is difficult to obtain consistent and well-defined surface features. In order to quantitatively assess their effects, we exploit the radical-induced color change of [Fe(SCN)6]3-, which turned out to be a more convenient method than the bending of AgNWs and the fluorescence-based methods. We show that the NGC-NPs outperform positive-curvature nanoparticles (PSC-NPs) and homogeneous nucleation, in terms of promoting cavitation. The NGC-NPs provide a higher percentage of gas-solid interface, and thus reduces the activation barrier during the critical stage of bubble nucleation. This leads a higher probability of cavitation and transforms more energy from ultrasonication to radical formation and shockwaves.

Synthesis and Reduction Processes of Silver Nanowires in a Silver(I) Sulfamate-Poly (Vinylpyrrolidone) Hydrothermal System

Silver (Ag) nanowires, as an important one-dimensional (1D) nanomaterial, have garnered wide attention, owing to their applications in electronics, optoelectronics, sensors, and other fields. In this study, an alternative hydrothermal route was developed to synthesize Ag nanowires via modified reduction of Ag+. Silver sulfamate plays an important role in the formation of Ag nanowires via controlled release of free Ag+. Results of controlled experiments and characterizations such as UV-vis spectroscopy, FTIR, XPS, and 1H NMR revealed that sulfamic acid does not function as a reductant, supporting by the generation of free Ag+ instead of Ag nanostructures in hydrothermally treated silver sulfamate solution. The initial reduction of Ag+ was induced by the combination of poly (vinylpyrrolidone) (PVP) end group and degradation products. This phenomenon was supported by abundant free Ag+ in the mixed preheated silver sulfamatic and preheated PVP aqueous solutions, indicating a second and distinct Ag+ autocatalytic reduction. Thus, the roles of different reagents and Ag+ reduction must be studied for nanomaterial syntheses.

Materials-Driven Soft Wearable Bioelectronics for Connected Healthcare

In the era of Internet-of-things, many things can stay connected; however, biological systems, including those necessary for human health, remain unable to stay connected to the global Internet due to the lack of soft conformal biosensors. The fundamental challenge lies in the fact that electronics and biology are distinct and incompatible, as they are based on different materials via different functioning principles. In particular, the human body is soft and curvilinear, yet electronics are typically rigid and planar. Recent advances in materials and materials design have generated tremendous opportunities to design soft wearable bioelectronics, which may bridge the gap, enabling the ultimate dream of connected healthcare for anyone, anytime, and anywhere. We begin with a review of the historical development of healthcare, indicating the significant trend of connected healthcare. This is followed by the focal point of discussion about new materials and materials design, particularly low-dimensional nanomaterials. We summarize material types and their attributes for designing soft bioelectronic sensors; we also cover their synthesis and fabrication methods, including top-down, bottom-up, and their combined approaches. Next, we discuss the wearable energy challenges and progress made to date. In addition to front-end wearable devices, we also describe back-end machine learning algorithms, artificial intelligence, telecommunication, and software. Afterward, we describe the integration of soft wearable bioelectronic systems which have been applied in various testbeds in real-world settings, including laboratories that are preclinical and clinical environments. Finally, we narrate the remaining challenges and opportunities in conjunction with our perspectives.

Composition-driven morphological evolution of BaTiO3 nanowires for efficient piezocatalytic hydrogen production

Hydrogen production from water by piezocatalysis is very attractive owing to its high energy efficiency and novelty. BaTiO3, a highly piezoelectric material, is particularly suitable for this application due to its high piezoelectric potential, non-toxic nature, and physicochemical stability. Owing to the critical role of morphology on properties, one-dimensional (1D) materials are expected to exhibit superior water-splitting performance and thus there is a need to optimise the processing conditions to develop outstanding piezocatalysts. In the present work, piezoelectric BaTiO3 nanowires (NWs) were hydrothermally synthesised with precursor Ba:Ti molar ratios of 1:1, 2:1, and 4:1. The morphology, defect chemistry, and hydrogen evolution reaction (HER) efficiency of the as-synthesised BaTiO3 NWs were systematically investigated. The results showed that the morphological features, aspect ratio, structural stability and defect contents of the 1D morphologies collectively have a significant impact on the HER efficiency. The morphological evolution mechanism of the 1D structures were described in terms of ion exchange and dissolution-growth processes of template-grown BaTiO3 NWs for different Ba:Ti molar ratios. Notably, the BaTiO3 NWs synthesised with Ba:Ti molar ratio of 2:1 displayed high crystallinity, good defect concentrations, and good structural integrity under ultrasonication, resulting in an outstanding HER efficiency of 149.24 μmol h-1g-1 which is the highest obtained for nanowire morphologies. These results highlight the importance of synthesis conditions for BaTiO3 NWs for generating excellent piezocatalytic water splitting performance. Additionally, post-ultrasonication tested BaTiO3 NWs demonstrated unexpected photocatalytic activity, with the BTO-1 sample (1:1 Ba:Ti) exhibiting 56% photodegradation of RhB in 2 h of UV irradiation.

Study of Nanoparticle-Polymer Interactions via the Mechanical Stretching of Surface-Enhanced Raman Scattering Substrates

It is shown that the aligned electrospun fibers are a convenient platform for studying the mechanical effects on nanomaterials, particularly when using surface-enhanced Raman scattering as a sensitive tool of monitoring. The ligands on the surface of the embedded Au nanoparticles fall off easily with the shear force from the stretching, in contrast to the counterparts protected by polymer/silica shells. Upon stretching, the chains of Au nanoparticles will reversibly break, as revealed by the dramatic changes in the longitudinal plasmon absorption. It is believed that such a platform will open a window for understanding mechanical effects at the nanoscale, and also a new means for synthetic control.

High-Stability Silver Nanowire-Al2O3 Composite Flexible Transparent Electrodes Prepared by Electrodeposition

Silver nanowire (AgNW) conductive film fabricated by solution processing was investigated as an alternative to indium tin oxide (ITO) in flexible transparent electrodes. In this paper, we studied a facile and effective method by electrodepositing Al₂O₃ on the surface of AgNWs. As a result, flexible transparent electrodes with improved stability could be obtained by electrodepositing Al₂O₃. It was found that, as the annealing temperature rises, the Al₂O₃ coating layer can be transformed from Al₂O₃·H₂O into a denser amorphous state at 150 °C. By studying the increase of electrodeposition temperature, it was observed that the transmittance of the AgNW-Al₂O₃ composite films first rose to the maximum at 70 °C and then decreased. With the increase of the electrodeposition time, the figure of merit (FoM) of the composite films increased and reached the maximum when the time was 40 s. Through optimizing the experimental parameters, a high-stability AgNW flexible transparent electrode using polyimide (PI) as a substrate was prepared without sacrificing optical and electrical performance by electrodepositing at -1.1 V and 70 °C for 40 s with 0.1 mol/L Al(NO₃)₃ as the electrolyte, which can withstand a high temperature of 250 °C or 250,000 bending cycles with a bending radius of 4 mm.

Beaming Elastic and SERS Emission from Bent-Plasmonic Nanowire on a Mirror Cavity

We report on the experimental observation of beaming elastic and surface enhanced Raman scattering (SERS) emission from a bent-nanowire on a mirror (B-NWoM) cavity. The system was probed with polarization resolved Fourier plane and energy-momentum imaging to study the spectral and angular signature of the emission wavevectors. The out-coupled elastically scattered light from the kink occupies a narrow angular spread. We used a self-assembled monolayer of molecules with a well-defined molecular orientation to utilize the out-of-plane electric field in the cavity for enhancing Raman emission from the molecules and in achieving beaming SERS emission. Calculated directionality for elastic scattering and SERS emission was found to be 16.2 and 12.5 dB, respectively. The experimental data were corroborated with three-dimensional numerical finite element and finite difference time domain based numerical simulations. The results presented here may find relevance in understanding coupling of emitters with elongated plasmonic cavities and in designing on-chip optical antennas.