Enhanced Organic Photocatalysis in Confined Flow through a Carbon Nitride Nanotube Membrane with Conversions in the Millisecond Regime

Confining Bismuth-Halide Perovskite in Mesochannels of Silica Nanomembranes for Exceptional Photocatalytic Abatement of Air Pollutants

Spatially confined photocatalysis has emerged as a viable strategy for the intensification of various redox reactions, but the influence of confined structure on reaction behavior is always overlooked in gas-solid reactions. Herein, we report a nanomembrane with confining Cs3 Bi2 Br9 nanocrystals inside vertical channels of porous insulated silica thin sheets (CBB@SBA(⊥)) for photocatalytic nitric oxide (NO) abatement. The ordered one-dimensional (1D) pore channels with mere 70 nm channel length provide a highly accessible confined space for catalytic reactions. A record-breaking NO conversion efficiency of 98.2 % under a weight hourly space velocity (WHSV) of 3.0×106  mL g-1  h-1 , as well as exceptionally high stability over 14 h and durability over a wide humidity range (RH=15-90 %) was realized over SBA(⊥) confined Cs3 Bi2 Br9 , well beyond its nonconfined analogue and the Cs3 Bi2 Br9 confine in Santa Barbara Amorphous (SBA-15). Mechanism studies suggested that the insulated pore channels of SBA(⊥) in CBB@SBA(⊥) endow concentrated electron field and enhanced mass transfer that render high exposure of reactive species and lower reaction barrier needs for ⋅O2 - formation and NO oxidation, as well as prevents structural degradation of Cs3 Bi2 Br9 . This work expands an innovative strategy for designing efficient photocatalysts for air pollution remediation.

Self-assembly synthesis of hollow phosphorus-doped graphitic carbon nitride microboxes for the photodegradation of organic pollutants

The rational design of photocatalysts with efficiency and stability is highly desirable but remains challenging. Here, we report a supramolecular self-assembly strategy to construct hollow phosphorus-doped g-C3N4 microboxes (PCNMs). Considering the effects of multiple parameters on the structure and activity of samples, the orthogonal design is innovatively introduced to optimize technology parameters for screening high-performance g-C3N4. Under visible light irradiation (λ ≥ 420 nm), rhodamine B (RhB, 4 mg L-1) is completely degraded in just 80 seconds in the presence of the optimal PCNM. The kinetic rate constant of RhB degradation with the PCNM is 3.4633 min-1, demonstrating unprecedented activity that is about 112 times higher than that of bulk g-C3N4 (0.0309 min-1) synthesized by direct polycondensation of melamine. Additionally, the optimal PCNM also shows enhanced degradation efficiency for tetracycline. The outstanding properties are primarily attributed to the hollow architecture, high specific surface area, and phosphorus doping. This work advances the design of photocatalysts correlating various factors, opening an avenue for optimizing photocatalytic synthesis and activity.

Carbon Nitrides from Supramolecular Crystals: From Single Atoms to Heterojunctions and Advanced Photoelectrodes

Carbon nitride materials (CN) have become one of the most studied photocatalysts within the last 15 years. While CN absorbs visible light, its low porosity and fast electron-hole recombination hinder its photoelectric performance and have motivated the research in the modification of its physical and chemical properties (such as energy band structure, porosity, or chemical composition) by different means. In this Concept we review the utilization of supramolecular crystals as CN precursors to tailor its properties. We elaborate on the features needed in a supramolecular crystal to serve as CN precursor, we delve on the influence of metal-free crystals in the morphology and porosity of the resulting materials and then discuss the formation of single atoms and heterojunctions when employing a metal-organic crystal. We finally discuss the performance of CN photoanodes derived from crystals and highlight the current standing challenges in the field.

Accelerated Catalytic Ozonation in a Mesoporous Carbon-Supported Atomic Fe-N4 Sites Nanoreactor: Confinement Effect and Resistance to Poisoning

The design of a micro-/nanoreactor is of great significance for catalytic ozonation, which can achieve effective mass transfer and expose powerful reaction species. Herein, the mesoporous carbon with atomic Fe-N4 sites embedded in the ordered carbon nanochannels (Fe-N4/CMK-3) was synthesized by the hard-template method. Fe-N4/CMK-3 can be employed as nanoreactors with preferred electronic and geometric catalytic microenvironments for the internal catalytic ozonation of CH3SH. During the CH3SH oxidation process, the mass transfer coefficient of the Fe-N4/CMK-3 confined system with sufficient O3 transfer featured a level of at least 1.87 × 10-5, which is 34.6 times that of the Fe-N4/C-Si unconfined system. Detailed experimental studies and theoretical calculations demonstrated that the anchored atomic Fe-N4 sites and nanoconfinement effects regulated the local electronic structure of the catalyst and promoted the activation of O3 molecules to produce atomic oxygen species (AOS) and reactive oxygen species (ROS), eventually achieving efficient oxidation of CH3SH into CO2/SO42-. Benefiting from the high diffusion rate and the augmentation of AOS/ROS, Fe-N4/CMK-3 exhibited an excellent poisoning tolerance, along with high catalytic durability. This contribution provides the proof-of-concept strategy for accelerating catalytic ozonation of sulfur-containing volatile organic compounds (VOCs) by combining confined catalysis and atomic catalysts and can be extended to the purification of other gaseous pollutants.

Carbonaceous Material Modified MoO2 Nanospheres with Oxygen Vacancies for Enhanced Visible-Light Photocatalytic Oxidative Coupling of Benzylamine

Surface oxygen vacancy (OV) plays a pivotal role in the activation of molecular oxygen and separation of electrons and holes in photocatalysis. Herein, carbonaceous materials-modified MoO₂ nanospheres with abundant surface OVs (MoO₂/C-OV) were successfully synthesized via glucose hydrothermal processes. In situ introduction of carbonaceous materials triggered a reconstruction of the MoO₂ surface, which introduced abundant surface OVs on the MoO₂/C composites. The surface oxygen vacancies on the obtained MoO₂/C-OV were confirmed via electron spin resonance spectroscopy (ESR) and X-ray photoelectron spectroscopy (XPS). The surface OVs and carbonaceous materials boosted the activation of molecular oxygen to singlet oxygen (¹O₂) and superoxide anion radical (•O₂^-) in selectively photocatalytic oxidation of benzylamine to imine. The conversion of benzylamine was 10 times that of pristine MoO₂ nanospheres with a high selectivity under visible light irradiation at 1 atm air pressure. These results open an avenue to modify Mo-based materials for visible light-driven photocatalysis.

An efficient and multifunctional S-scheme heterojunction photocatalyst constructed by tungsten oxide and graphitic carbon nitride: Design and mechanism study

The design of multifunctional photocatalyst with strong redox performance is the key to achieve sustainable utilization of solar energy. In this study, an elegant S-scheme heterojunction photocatalyst was constructed between metal-free graphitic carbon nitride (g-C₃N₄) and noble-metal-free tungsten oxide (W₁₈O₄₉). As-established S-scheme heterojunction photocatalyst enabled multifunctional photocatalysis behavior, including hydrogen production, degradation (Rhodamine B) and bactericidal (Escherichia coli) properties, which represented extraordinary sustainability. Finite-difference time-domain (FDTD) simulations manifested that the integration of double-layer hollow g-C₃N₄ nanotubes with W₁₈O₄₉ nanowires could expand the light harvesting ability. Demonstrated by density functional theory (DFT) calculations and electron spin resonance (ESR) measurements, the S-scheme heterojunction not only promoted the separation of carriers, but also improved the redox ability of the catalyst. This work provides a theoretical basis for enhancing the photocatalytic performances and broadening the application field of photocatalysis.

Enhanced H2O2 utilization efficiency in Fenton-like system for degradation of emerging contaminants: Oxygen vacancy-mediated activation of O2

Hydrogen peroxide (H₂O₂) is the most commonly used oxidant in advanced oxidation processes for emerging organic contaminant degradation. However, the activation of H₂O₂ to generate reactive oxygen species is always accompanied by O₂ generation resulting in H₂O₂ waste. Here, we prepare a Ti doped Mn₃O₄/Fe₃O₄ ternary catalyst (Ti-Mn₃O₄/Fe₃O₄) to create abundant oxygen vacancies (OVs), which yields electron delocalization impacts on enhancing the electrical conductivity, accelerating the activation of O₂ to produce H₂O₂. In Ti-Mn₃O₄/Fe₃O₄/H₂O₂ system, OVs-mediated O₂/O₂^•-/H₂O₂ redox cycles trigger the activation of locally generated O₂, boost the regeneration of O₂^•- and on site produce H₂O₂ for replenishment. This leads to a 100% removal of tiamulin in 30 min at an unprecedented H₂O₂ utilization efficiency of 96.0%, which is 24 folds higher than that with Fe₃O₄/H₂O₂. Importantly, further integration of Ti-Mn₃O₄/Fe₃O₄ catalysts into membrane filtration achieved high rejections of tiamulin (> 83.9%) from real surface water during a continuous 12-h operation, demonstrating broad pH adaptability, excellent catalytic stability and leaching resistance. This work demonstrates a feasible strategy for developing OVs-rich catalysts for improving H₂O₂ utilization efficiency via activation of locally generated oxygen during the Haber-Weiss reaction.

Na-doped g-C3N4/NiO 2D/2D laminated p-n heterojunction nanosheets toward optimized photocatalytic performance

Na-doped g-C₃N₄/NiO 2D/2D laminated p-n heterojunction nanosheets are fabricated by facile calcination and hydrothermal methods. The average thickness of g-C₃N₄ nanosheets is ∼1.388 nm, and the ultrathin structure allows for a high specific surface area and enough surface active sites, increasing the surface reactivity. The flower ball like structure of NiO increases the light utilization rate. Na doping accelerates charge separation and transport by increasing the electrical conductivity. The g-C₃N₄ and NiO nanosheets form 2D/2D laminated structures, and the spherical structure can suppress the agglomeration of 2D nanosheets, which could realize adequate interface contact and form efficient p-n heterojunctions. The p-n heterostructure builds an internal electric field to accelerate spatial charge separation. Under visible light irradiation, the photocatalytic degradation efficiency for ciprofloxacin and the hydrogen production rate of Na-doped g-C₃N₄/NiO are up to 99.0%, and 2299.32 μmol h^-1 g^-1, respectively, which are several times higher than those of the pristine one. The fabrication strategy for 2D/2D laminated heterojunctions may provide new insights for the preparation of novel laminated photocatalysts with high performance.

Oxidation of micropollutants by visible light active graphitic carbon nitride and ferrate(VI): Delineating the role of surface delocalized electrons

The treatment of recalcitrant micropollutants in water remains challenging. Ferrate(VI) (Fe^VIO₄^2-, Fe(VI)) has emerged as a green oxidant to oxidize organic molecules, however, its reactivity with recalcitrant micropollutants are sluggish. Our results demonstrate enhanced oxidation of carbamazepine (CBZ) by three types of visible light-responsive graphitic carbon nitride (g-C₃N₄) photocatalyst in absence and presence of ferrate(VI) (Fe^VIO₄^2-, Fe(VI)) under mild alkaline conditions. The g-C₃N₄ photocatalysts were prepared by thermal process using urea, thiourea, and melamine and were named as CN-U, CN-T, and CN-M, respectively. The degradation efficiency of CBZ, in both visible light-g-C₃N₄ and visible light-g-C₃N₄-Fe^VIO₄^2- systems followed the order of CN-U > CN-T > CN-M. The mechanisms for this trend was elucidated by measuring physiochemical properties of the microstructures with various surface and analytical techniques. Results suggest the dominating role of specific surface area and surface delocalized electrons of microstructures in degrading CBZ. Crystallinity, morphology, and surface functional groups may not directly associate with CBZ degradation. The CN-U has higher specific surface area and surface delocalized electrons than CN-T and CN-M and therefore the highest degradation efficiency of CBZ. The surface electrons likely generated O₂^●- and ¹O₂ in the visible light-g-C₃N₄ system. The additional oxidants, Fe^V and Fe^IV in the visible light-g-C₃N₄- Fe^VIO₄^2- system led to higher degradation efficiency than the visible light-g-C₃N₄ system. Results suggest that the surfaces of g-C₃N₄ may be prepared preferentially with high levels of delocalized electrons at the surface of microstructures to enhance degradation of micropollutants.

Bioinspired Dual-Driven Binary Heterogeneous Nanofluidic Ionic Diodes

Recently, bioinspired 2D material-based nanofluidic systems with unique properties and advantages have been receiving considerable research interest and getting rapid development. However, it remains a huge challenge to integrate adaptive responsiveness to external stimuli and asymmetric ion transport characteristics into the 2D nanofluidic systems. Herein, we report a dual-driven switchable asymmetric ionic transport phenomenon through a graphene oxide-based heterogeneous 2D nanofluidic membrane. Taking advantage of the formation of a charge heterojunction induced by the variation of pH or UV irradiation, a maximum ionic current rectification (ICR) ratio of ca. 56 for pH or 140 for light was achieved. Such smart nanofluidic devices with pH and light dual-responsiveness and asymmetric ion transport behaviors provide a universal strategy for potential applications in chemical sensing, water treatment, and energy conversion and establish a promising platform for exploring advanced quantum ionics biodevices with ultrafast signal transmission, nanochannel-structured bioreactors with high efficiency, etc.

Cobalt Single Atoms Anchored on Oxygen-Doped Tubular Carbon Nitride for Efficient Peroxymonosulfate Activation: Simultaneous Coordination Structure and Morphology Modulation

Simultaneous regulation of the coordination environment of single-atom catalysts (SACs) and engineering architectures with efficient exposed active sites are efficient strategies for boosting peroxymonosulfate (PMS) activation. We isolated cobalt atoms with dual nitrogen and oxygen coordination (Co-N₃ O₁ ) on oxygen-doped tubular carbon nitride (TCN) by pyrolyzing a hydrogen-bonded cyanuric acid melamine-cobalt acetate precursor. The theoretically constructed Co-N₃ O₁ moiety on TCN exhibited an impressive mass activity of 7.61×10⁵  min^-1  mol^-1 with high ¹ O₂ selectivity. Theoretical calculations revealed that the cobalt single atoms occupied a dual nitrogen and oxygen coordination environment, and that PMS adsorption was promoted and energy barriers reduced for the key *O intermediate that produced ¹ O₂ . The catalysts were attached to a widely used poly(vinylidene fluoride) microfiltration membrane to deliver an antibiotic wastewater treatment system with 97.5 % ciprofloxacin rejection over 10 hours, thereby revealing the suitability of the membrane for industrial applications.

Catalytic confinement effects in nanochannels: from biological synthesis to chemical engineering

Catalytic reactions within nanochannels are of significant importance in disclosing the mechanisms of catalytic confinement effects and developing novel reaction systems for scientific and industrial demands. Interestingly, catalytic confinement effects exist in both biological and artificial nanochannels, which enhance the reaction performance of various chemical reactions. In this minireview, we investigate the recent advances on catalytic confinement effects in terms of the reactants, reaction processes, catalysts, and products in nanochannels. A systematic discussion of catalytic confinement effects associated with biological synthesis in bio-nanochannels and catalytic reactions in artificial nanochannels in chemical engineering is presented. Furthermore, we summarize the properties of reactions both in nature and chemical engineering and provide a brief overlook of this research field.

Excited State Dynamics in Dual-Defects Modified Graphitic Carbon Nitride

Significant efforts are focused on defect-engineering of metal-free graphitic carbon nitride (g-C₃N₄) to amplify its efficacy. A conceptually new multidefect-modified g-C₃N₄ having simultaneously two or more defects has attracted strong attention for its enhanced photocatalytic properties. We model and compare the excited state dynamics in g-C₃N₄ with (i) nitrogen defects (N vacancy and CN group) and (ii) dual defects (N vacancy, CN group, and O doping) and show that the nonradiative recombination of charge carriers in these systems follows the Shockley-Read-Hall mechanism. The nitrogen defects create three midgap states that trap charges and act as recombination centers. The dual-defect modified systems exhibit superior properties compared with pristine g-C₃N₄ because the defects facilitate rapid charge separation and extend the spectrum of absorbed light. The system doped with O shows better performance due to enhanced carrier lifetime and higher oxidation potential caused by a downshifted valence band. The study provides guidance for rational design of stable and efficient photocatalytic materials.

Synthesis of Sulfonyl Chlorides from Aryldiazonium Salts Mediated by a Heterogeneous Potassium Poly(heptazine imide) Photocatalyst

Visible light photocatalysis is a tool in synthetic chemistry that allows us to utilize the energy of photons via photoinduced electron transfer to promote diverse organic reactions. Herein, a heterogeneous transition metal-free material, a type of carbon nitride photocatalyst, potassium poly(heptazine imide), is employed to produce sulfonyl chlorides from arenediazonium salts under mild conditions (visible light irradiation, room temperature) with 50-95% yields. The method is suitable for the synthesis of both electron rich and electron deficient compounds, and it shows high tolerance toward different functional groups (halides, ester, nitro, cyano groups). Thus, a sustainable photocatalytic alternative to the Meerwein chlorosulfonylation reaction is offered.

Porous Ga2 O3 Nanotubes Derived from Urease-Mediated Interfacially-Grown NH4 Ga(OH)2 CO3 for High-Efficient Hydrogen Evolution

The authors proposed a novel template-free strategy, urease-mediated interfacial growth of NH₄ Ga(OH)₂ CO₃ nanotubes at 20-50 °C, to fabricate the porous Ga₂ O₃ nanotubes. The subtlety of the proposed strategy is all the products from urea enzymolysis are utilized in formation of NH₄ Ga(OH)₂ CO₃ precipitates, and the key for interfacial growth of NH₄ Ga(OH)₂ CO₃ nanotubes is the dynamic match between the rate of CO₂ bubble fusion and NH₄ Ga(OH)₂ CO₃ precipitation. The proposed strategy works well for the doped porous Ga₂ O₃ nanotubes. As a proof-of-concept, the porous β-Ga₂ O₃ and β-Ga₂ O₃ :Cr_0.001 nanotubes are used as photocatalysts or co-catalysts with Pt, for H₂ evolution from water splitting. The H₂ evolution rate of porous β-Ga₂ O₃ nanotubes reach 39.3 mmol g^-1 h^-1 with solar-to-hydrogen (STH) conversion efficiency of 2.11% (Hg lamp) or 498 µmol g^-1 h^-1 with STH of 0.03% (Xe lamp) respectively, both about 3 times of β-Ga₂ O₃ nanoparticles synthesized at pH 9.0 without urease. The Cr-doping enhances the in-the-dark H₂ evolution rate pre-lighted by Hg lamp, and Pt co-catalysis further elevates the H₂ evolution rate, for instance, the H₂ evolution rate of Pt-loaded β-Ga₂ O₃ :Cr_0.001 nanotubes reaches 54.7 mmol g^-1 h^-1 with STH of 2.94% under continuous lighting of Hg lamp and 1062 µmol g^-1 h^-1 in-the-dark.

Strain-Induced Ferroelectric Heterostructure Catalysts of Hydrogen Production through Piezophototronic and Piezoelectrocatalytic System

In this work, we discover a piezoelectrocatalytic system composed of a ferroelectric heterostructure of BaTiO₃ (BTO)@MoSe₂ nanosheets, which exhibit piezoelectric potential (piezopotential) coupling with electrocatalyzed effects by a strain-induced piezopotential to provide an internal bias to the catalysts' surface; subsequently, the catalytic properties are substantially altered to enable the formation of activity states. The H₂ production rate of BTO@MoSe₂ for the piezoelectrocatalytic H₂ generation is 4533 μmol h^-1 g^-1, which is 206% that of TiO₂@MoSe₂ for piezophototronic (referred to as piezophotocatalytic process) H₂ generation (∼2195.6 μmol h^-1 g^-1). BTO@MoSe₂ presents a long-term H₂ production rate of 21.2 mmol g^-1 within 8 h, which is the highest recorded value under piezocatalytic conditions. The theoretical and experimental results indicate that the ferroelectric BTO acts as a strain-induced electric field generator while the few-layered MoSe₂ is facilitating piezocatalytic redox reactions on its active sites. This is a promising method for environmental remediation and clean energy development.