Control of Monodomain Polymer-Stabilized Cuboidal Nanocrystals of Chiral Nematics by Confinement

Soft Matter Photonics: Interplay of Soft Matter and Light

The light-soft matter interaction and its applications form the foundation of Soft Matter Photonics, here termed "Soft Mattonics", positioning it as fertile ground for developing next-generation photonic technologies. Over the past few decades, this rapidly evolving field has achieved significant advancements, leading to successful applications across a wide range of disciplines, including optoelectronics, photonics, information technology, material science, robotics, biomedicine, and astronomy. In this Perspective, we provide an overview of Soft Mattonics, highlighting recent developments in light-controlled soft matter and their applications in light field manipulating. Additionally, we offer insights into future research directions for Soft Mattonics, with an emphasis on both foundational research and practical applications that will drive continued growth and innovation in this field.

Tunable Circularly Polarized Luminescence Enabled by Photo-induced Phase Transition in a Blue-phase Liquid Crystal with a Wide Room-temperature Window

Chiral luminescent liquid crystal (LC) materials with switchable circularly polarized luminescence (CPL) signals have received extensive attention, in which the use of light stimulation to achieve different CPL states is of great significance. However, there are very few reports on the generation and regulation of CPL signals enabled by blue phase LC (BPLC). Herein, achieving CPL signal inversion based on the phase transition induced by light/temperature stimulation in a BPLC system with a wide room-temperature window is reported. A binaphthalene azo-based chiral photoswitch (S)-switch 3 with high helical twisted power (HTP) and large HTP variation is synthesized, and a BP system with a wide room temperature range is further fabricated by doping (S)-switch 3 and a fluorescence molecule into a bulk LC. By regulating the doping amount of (S)-switch 3, a phase transition from BP to cholesteric (Ch) phase at room temperature is observed upon 365 nm UV light irradiation or during cooling process, and the polarization inversion of CPL signal is correspondingly found due to the different CPL generation mechanisms of BPLC and CLC. This study provides a new strategy for the flexible regulation of CPL signals in a BPLC system.

Photopatterned Anchoring Stabilizing Monodomain Blue Phases

Blue phase liquid crystals (BPLCs) are chiral self-assembled three-dimensional (3D) periodic structures which have attracted a lot of attention due to their electro-optical properties, relevant for tunable soft photonic crystals and fast-response displays. However, to realize this application potential, controlling the BPLC alignment at the surfaces is crucial, and one way to obtain the desired alignment is by photoalignment patterning. In this article, monodomain BPLC samples with controlled orientation are achieved by imposing different alignment patterns that have a periodicity that is compatible with the size of the BPLC unit cell, using two-step photoalignment with polarized ultraviolet (UV) light. Experiments are complemented by numerical simulations to design striped surface alignment patterns, which induce specific director orientations on the boundary layer of the confined BPLC. By designing the patterns and matching the periodicity to a specific BP material, we can control the orientation of the blue phase unit cell lattice in the sample, including the azimuthal angle. The orientation is measured by the Kossel patterns and matches the optimal configuration predicted by stability analysis using Landau-de Gennes free energy modeling. The detailed structure and reduced symmetry of the BP near the surface are investigated, and the corresponding (meta)stable structures are demonstrated. Overall, we demonstrate that two-step photoalignment patterning is a reliable, relatively simple, and reconfigurable method to achieve a high-quality monodomain BP with controlled and tunable crystalline orientation.

A Halogen-Bonded Fluorescent Molecular Photoswitch: Transition from 3D Cubic Lattice to 1D Helical Superstructure for Polarization Inversion of Circularly Polarized Luminescence

The fabrication of materials that can switch between circularly polarized luminescence (CPL) signals is both essential and challenging. Here, two new halogen-bonded fluorescent molecular photoswitches, namely, HB-switch 1 and HB-switch 2, containing α-cyano-substituted diarylethene compounds with different end groups were developed. Upon exposure to specific UV or visible light wavelengths, they exhibited controllable and reversible Z/E photoisomerization. When these switches were integrated into blue-phase liquid crystals (BPLCs), the temperature range of BP significantly expanded. Notably, the BP system incorporating HB-switch 1 exclusively achieved reversible polarization inversion of CPL signals under irradiation with specific UV/Visible light and during cooling/heating. The photo/thermal dual-response behavior of the CPL signals can be attributed to the phase transition from a high-symmetry 3D BP Icubic lattice to a low-symmetry 1D helical superstructure induced by the Z/E photoisomerization of HB-switch 1 and temperature changes. This study underscores the significance of employing halogen-bond assembly strategies to design materials with switchable CPL signals, opening new possibilities for CPL-active systems.

When quantum dots meet blue phase liquid crystal elastomers: visualized full-color and mechanically-switchable circularly polarized luminescence

Polymer-based circularly polarized luminescence (CPL) materials with the advantage of diversified structure, easy fabrication, high thermal stability, and tunable properties have garnered considerable attention. However, adequate and precise tuning over CPL in polymer-based materials remains challenging due to the difficulty in regulating chiral structures. Herein, visualized full-color CPL is achieved by doping red, green, and blue quantum dots (QDs) into reconfigurable blue phase liquid crystal elastomers (BPLCEs). In contrast to the CPL signal observed in cholesteric liquid crystal elastomers (CLCEs), the chiral 3D cubic superstructure of BPLCEs induces an opposite CPL signal. Notably, this effect is entirely independent of photonic bandgaps (PBGs) and results in a high glum value, even without matching between PBGs and the emission bands of QDs. Meanwhile, the lattice structure of the BPLCEs can be reversibly switched via mechanical stretching force, inducing on-off switching of the CPL signals, and these variations can be further fixed using dynamic disulfide bonds in the BPLCEs. Moreover, the smart polymer-based CPL systems using the BPLCEs for anti-counterfeiting and information encryption have been demonstrated, suggesting the great potential of the BPLCEs-based CPL active materials.

Photonic features of blue phase liquid crystals under curved confinement

Blue phase (BP) liquid crystals represent a fascinating state of soft matter that showcases unique optical and electro-optical properties. Existing between chiral nematic and isotropic phases, BPs are characterized by a three-dimensional cubic lattice structure resulting in selective Bragg reflections of light and consequent vivid structural colors. However, the practical realization of these material systems is hampered by their narrow thermal stability and multi-domain crystalline nature. This feature article provides an overview of the efforts devoted to stabilizing these phases and creating monodomain structures. In particular, it delves into the complex relationship between geometrical confinement, induced curvature, and the structural stability and photonic features of BPs. Understanding the interaction of curved confinement and structural stability of BPs proves crucially important for the integration of these materials into flexible and miniaturized devices. By shedding light on these critical aspects, this feature review aims to highlight the significance of understanding the coupling effects of physical and mechanical forces on the structural stability of these systems, which can pave the way for the development of efficient and practical devices based on BP liquid crystals.

Curvature and confinement effects on chiral liquid crystal morphologies

Chiral liquid crystals (ChLCs) exhibit an inherent twist that originates at the molecular scale and can extend over multiple length scales when unconstrained. Under confinement, the twist is thwarted, leading to formation of defects in the molecular order that offer distinct optical responses and opportunities for colloidal driven assembly. Past studies have explored spheroidal confinement down to the nanoscopic regime, where curved boundaries produce surface defects to accommodate topological constraints and restrict the propagation of cuboidal defect networks. Similarly, strict confinement in channels and shells has been shown to give rise to escaped configurations and skyrmions. However, little is known about the role of extrinsic curvature in the development of cholesteric textures and Blue Phases (BP). In this paper, we examine the palette of morphologies that arises when ChLCs are confined in toroidal and cylindrical cavities. The equilibrium morphologies are obtained following an annealing strategy of a Landau-de Gennes free energy functional. Three dimensionless groups are identified to build phase diagrams: the natural twist, the ratio of elastic energies, and the circumscription of a BP cell. Curvature is shown to introduce helical features that are first observed as a Double Twist, and progress to Chiral Ribbons and, ultimately, Helical BP and BP. Chiral ribbons are examined as useful candidates for driven assembly given their tunability and robustness.

Phase transitions and topological defects in discotic liquid crystal droplets with planar anchoring: a Monte Carlo simulation study

In this work we present the results of Monte Carlo (MC) simulations at the isothermal-isobaric ensemble for a discotic liquid crystal (DLC) droplet whose surface promotes edge-on (planar) anchoring. For a given pressure, we simulate an annealing process that enables observation of phase transitions within the spherical droplet. In particular, we report a first order isotropic-nematic transition as well as a nematic-columnar transition at the center of the droplet. We found the appearance of topological defects consisting of two disclination lines with ends at the surface of the sphere. We also observed that both transitions, isotropic-nematic and nematic-columnar, occur at lower temperatures as compared to the unconfined system.

Flow and assembly of cellulose nanocrystals (CNC): A bottom-up perspective - A review

Cellulosic sources, such as lignocellulose-rich biomass, can be mechanically or acid degraded to produce inclusions called cellulose nanocrystals (CNCs). They have several uses in the sectors of biomedicine, photonics, and material engineering because of their biodegradability, renewability, sustainability, and mechanical qualities. The processing and design of CNC-based products are inextricably linked to the rheological behaviour of CNC suspension or in combination with other chemicals, such as surfactants or polymers; in this context, rheology offers a significant link between microstructure and macro scale flow behaviour that is intricately linked to material response in applications. The flow behaviour of CNC items must be properly specified in order to produce goods with value-added characteristics. In this review article, we provide new research on the shear rheology of CNC dispersion and CNC-based hydrogels in the linear and nonlinear regime, with storage modulus values reported to range from ~10^-3 to 10³ Pa. Applications in technology and material science are also covered simultaneously. We carefully examined the effects of charge density, aspect ratio, concentration, persistence length, alignment, liquid crystal formation, the cause of chirality in CNCs, interfacial behaviour and interfacial rheology, linear and nonlinear viscoelasticity of CNC suspension in bulk and at the interface using the currently available literature.

Elastic Instability of Cubic Blue Phase Nano Crystals in Curved Shells

Many crystallization processes, including biomineralization and ice-freezing, occur in small and curved volumes, where surface curvature can strain the crystal, leading to unusual configurations and defect formation. The role of curvature on crystallization, however, remains poorly understood. Here, we study the crystallization of blue phase (BP) liquid crystals under curved confinement, which provides insights into the mechanism by which BPs reconfigure their three-dimensional lattice structure to adapt to curvature. BPs are a three-dimensional assembly of high-chirality liquid crystal molecules arranged into body-centered (BPI) or simple cubic (BPII) symmetries. BPs with submicrometer cubic-crystalline lattices exhibit tunable Bragg reflection and submillisecond response time to external stimuli such as an electric field, making them attractive for advanced photonic materials. In this work, we have systematically studied BPs confined in spherical shells with well-defined curvature and boundary conditions. The optical behavior of shells has also been examined at room temperature, where the cholesteric structure forms. In the cholesteric phase, perpendicular anchoring generates focal conic domains on the shell's surface, which transition into stripe patterns as the degree of curvature increases. Our results demonstrate that both higher degrees of curvature and strong spatial confinement destabilize BPI and reconfigure that phase to adopt the structure and optical features of BPII. We also show that the coupling of curvature and confinement nucleates skyrmions at greater thicknesses than those observed for a flat geometry. These findings are particularly important for integrating BPs into miniaturized and curved/flexible devices, including flexible displays, wearable sensors, and smart fabrics.

Structural properties and ring defect formation in discotic liquid crystal nanodroplets

In this work, we performedNpTMonte Carlo simulations of a Gay-Berne discotic liquid crystal confined in a spherical droplet under face-on anchoring and fixed pressure. We find that, in contrast to the unbounded system, a plot of the order parameter as function of temperature does not show a clear evidence of a first-order isotropic-nematic transition. We also find that the impossibility of simultaneously satisfy the uniform director field requirement of a nematic phase with the radial boundary conditions, results in the appearance of a ring disclination line as a stress release mechanism in the interior of the droplet. Under further cooling, a columnar phase appears at the center of the droplet.

Capillary Flow Characterizations of Chiral Nematic Cellulose Nanocrystal Suspensions

Studying the flow-induced alignment of anisotropic liquid crystalline materials is of major importance in the 3D printing of advanced architectures. However, in situ characterization and quantitative measurements of local orientations during the 3D printing process are challenging. Here, we report a microfluidic strategy integrated with polarized optical microscopy (POM) to perform the in situ characterization of the alignment of cellulose nanocrystals (CNCs) under the shear-flow condition of the 3D printer's nozzle in the direct ink writing process. To quantify the alignment, we exploited birefringence measurements under white and monochromatic light. We show that the flow-induced birefringence patterns are significantly influenced by the initial structure of the aqueous CNC suspensions. Depending on the CNC concentration and sonication treatment, various structures can form in the CNC suspensions, such as isotropic, chiral nematic (cholesteric), and nematic (gel-like) structures. In the chiral nematic phase, in particular, the shear flow in the microfluidic capillary has a distinct effect on the alignment of the CNC particles. Our experimental results, complemented by hydrodynamic simulations, reveal that at high flow rates (Er ≈ 1000), individual CNC particles align with the flow exhibiting a weak chiral structure. In contrast, at lower flow rates (Er ≈ 241), they display the double-twisted cylinder structure. Understanding the flow effect on the alignment of the chiral liquid crystal can pave the way to designing 3D printed architectures with internal chirality for advanced mechanical and smart photonic applications.