Direct Imaging of Long-Range Exciton Transport in Quantum Dot Superlattices by Ultrafast Microscopy

Pattern-illumination time-resolved phase microscopy and its applications for photocatalytic and photovoltaic materials

Pattern-illumination time-resolved phase microscopy (PI-PM) is a technique used to study the microscopic charge carrier dynamics in photocatalytic and photovoltaic materials. The method involves illuminating a sample with a pump light pattern, which generates charge carriers and they decay subsequently due to trapping, recombination, and transfer processes. The distribution of photo-excited charge carriers is observed through refractive index changes using phase-contrast imaging. In the PI-PM method, the sensitivity of the refractive index change is enhanced by adjusting the focus position, the method takes advantage of photo-excited charge carriers to observe non-radiative processes, such as charge diffusion, trapping in defect/surface states, and interfacial charge transfer of photocatalytic and photovoltaic reactions. The quality of the image sequence is recovered using various informatics calculations. Categorizing and mapping different types of charge carriers based on their response profiles using clustering analysis provides spatial information on charge carrier types and the identification of local sites for efficient and inefficient photo-induced reactions, providing valuable information for the design and optimization of photocatalytic materials such as the cocatalyst effect.

Persistent enhancement of exciton diffusivity in CsPbBr3 nanocrystal solids

In semiconductors, exciton or charge carrier diffusivity is typically described as an inherent material property. Here, we show that the transport of excitons among CsPbBr3 perovskite nanocrystals (NCs) depends markedly on how recently those NCs were occupied by a previous exciton. Using transient photoluminescence microscopy, we observe a striking dependence of the apparent exciton diffusivity on excitation laser power that does not arise from nonlinear exciton-exciton interactions or thermal heating. We interpret our observations with a model in which excitons cause NCs to transition to a long-lived metastable configuration that markedly increases exciton transport. The exciton diffusivity observed here (>0.15 square centimeters per second) is considerably higher than that observed in other NC systems, revealing unusually strong excitonic coupling between NCs. The finding of a persistent enhancement in excitonic coupling may help explain other photophysical behaviors observed in CsPbBr3 NCs, such as superfluorescence, and inform the design of optoelectronic devices.

Micrometer-Scale Carrier Transport in the Solid Film of Giant CdSe/CdS Nanocrystals Imaged by Transient Absorption Microscopy

For the practical applications in solar cells and photodetectors, semiconductor colloidal nanocrystals (NCs) are assembled into a high-concentration film with carrier transport characteristics, the full understanding and effective control of which are critical for the achievement of high light-to-electricity conversion efficiencies. Here we have applied transient absorption microscopy to the solid film of giant CdSe/CdS NCs and discovered that at high pump fluences the carrier transport could reach a long distance of ∼2 μm within ∼30 ps after laser pulse excitation. This intriguing behavior is attributed to the metal-insulator transition and the associated bandlike transport, which are promoted by the enhanced electronic coupling among neighboring NCs with extended wave functions overlap of the excited-state charge carriers. Besides providing fundamental transport information in the regime of high laser pump fluences, the above findings shed light on the rational design of high-power light detecting schemes based on colloidal NCs.

Efficient 2D to 0D Energy Transfer in HgTe Nanoplatelet-Quantum Dot Heterostructures through High-Speed Exciton Diffusion

Large area absorbers with localized defect emission are of interest for energy concentration via the antenna effect. Transfer between 2D and 0D quantum-confined structures is advantageous as it affords maximal lateral area antennas with continuously tunable emission. We report the quantum efficiency of energy transfer in in situ grown HgTe nanoplatelet (NPL)/quantum dot (QD) heterostructures to be near unity (>85%), while energy transfer in separately synthesized and well separated solutions of HgTe NPLs to QDs only reaches 47 ± 11% at considerably higher QD concentrations. Using Kinetic Monte Carlo simulations, we estimate an exciton diffusion constant of 1-10 cm2/s in HgTe NPLs, the same magnitude as that of 2D semiconductors. We also simulate in-solution energy transfer between NPLs and QDs, recovering an R-4 dependence consistent with 2D-0D near-field energy transfer even in randomly distributed NPL/QD mixtures. This highlights the advantage of NPLs 2D morphology and the efficiency of NPL/QD heterostructures and mixtures for energy harvesting.

A composite electrodynamic mechanism to reconcile spatiotemporally resolved exciton transport in quantum dot superlattices

Quantum dot (QD) solids are promising optoelectronic materials; further advancing their device functionality requires understanding their energy transport mechanisms. The commonly invoked near-field Förster resonance energy transfer (FRET) theory often underestimates the exciton hopping rate in QD solids, yet no consensus exists on the underlying cause. In response, we use time-resolved ultrafast stimulated emission depletion (STED) microscopy, an ultrafast transformation of STED to spatiotemporally resolve exciton diffusion in tellurium-doped cadmium selenide-core/cadmium sulfide-shell QD superlattices. We measure the concomitant time-resolved exciton energy decay due to excitons sampling a heterogeneous energetic landscape within the superlattice. The heterogeneity is quantified by single-particle emission spectroscopy. This powerful multimodal set of observables provides sufficient constraints on a kinetic Monte Carlo simulation of exciton transport to elucidate a composite transport mechanism that includes both near-field FRET and previously neglected far-field emission/reabsorption contributions. Uncovering this mechanism offers a much-needed unified framework in which to characterize transport in QD solids and additional principles for device design.

Progress and Prospects in Optical Ultrafast Microscopy in the Visible Spectral Region: Transient Absorption and Two-Dimensional Microscopy

Ultrafast optical microscopy, generally employed by incorporating ultrafast laser pulses into microscopes, can provide spatially resolved mechanistic insight into scientific problems ranging from hot carrier dynamics to biological imaging. This Review discusses the progress in different ultrafast microscopy techniques, with a focus on transient absorption and two-dimensional microscopy. We review the underlying principles of these techniques and discuss their respective advantages and applicability to different scientific questions. We also examine in detail how instrument parameters such as sensitivity, laser power, and temporal and spatial resolution must be addressed. Finally, we comment on future developments and emerging opportunities in the field of ultrafast microscopy.

Charge Injection and Energy Transfer of Surface-Engineered InP/ZnSe/ZnS Quantum Dots

Surface passivation is a critical aspect of preventing surface oxidation and improving the emission properties of nanocrystal quantum dots (QDs). Recent studies have demonstrated the critical role of surface ligands in determining the performance of QD-based light-emitting diodes (QD-LEDs). Herein, the underlying mechanism by which the capping ligands of InP/ZnSe/ZnS QDs influence the brightness and lifetime of the QD-LEDs is investigated. The electrochemical results demonstrate that highly luminescent InP/ZnSe/ZnS QDs exhibit modulated charge injection depending on the length of the surface ligand chains: short alkyl chains on the ligands are favorable for charge transport to the QDs. In addition, the correlation between the spectroscopic and XRD analyses suggests that the length of the ligand chain tunes the ligand-ligand coupling strength, thereby controlling the inter-QD energy transfer dynamics. The present findings shed new light on the crucial role of surface ligands for InP/ZnSe/ZnS QD-LED applications.

Superradiance and Exciton Delocalization in Perovskite Quantum Dot Superlattices

Achieving superradiance in solids is challenging due to fast dephasing processes from inherent disorder and thermal fluctuations. Perovskite quantum dots (QDs) are an exciting class of exciton emitters with large oscillator strength and high quantum efficiency, making them promising for solid-state superradiance. However, a thorough understanding of the competition between coherence and dephasing from phonon scattering and energetic disorder is currently unavailable. Here, we present an investigation of exciton coherence in perovskite QD solids using temperature-dependent photoluminescence line width and lifetime measurements. Our results demonstrate that excitons are coherently delocalized over 3 QDs at 11 K in superlattices leading to superradiant emission. Scattering from optical phonons leads to the loss of coherence and exciton localization to a single QD at temperatures above 100 K. At low temperatures, static disorder and defects limit exciton coherence. These results highlight the promise and challenge in achieving coherence in perovskite QD solids.

Deciphering modes of long-range energy transfer in perovskite crystals using confocal excitation and wide-field fluorescence spectral imaging

Excitation energy migration beyond mesoscale is of contemporary interest for both solar photovoltaic and light-emissive devices, especially in context of organometal halide perovskites (OMHPs) which have been shown to have very long (charge carrier) diffusion lengths. While understanding the energy propagation pathways in OMHPs is crucial for further advancement of material design and improvement of opto-electronic features, the simultaneous existence of multiple processes like carrier diffusion, photon recycling, and photon transport makes it often complex to differentiate them. In this study, we unravel the diverse yet dominant excitation energy transfer mode(s) in crystalline MAPbBr3 micron-sized 1-D rods and plates by localized (confocal) laser excitation coupled with spectrally-resolved wide-field fluorescence imaging. While rarely used, this technique can efficiently probe excitation migration beyond the diffraction limit and can be realized by simple modification of existing epifluorescence microscopy setups. We find that in rods of length below ~2 microns, carrier diffusion dominates amongst the various energy transfer processes. However, the transient non-radiative defects severely inhibit the extent of carrier migration and also temporarily affect the radiative recombination dynamics of the photo-carriers. For MAPbBr3 plates of several tens of micrometers, we find that the photoluminescence (PL) spectral characteristics remain unaltered at short distances (< ~3 μm) whilst at a larger distance, the spectral profile is gradually red-shifted. This implies that carrier diffusion dominates over small distances, while photon recycling, i.e., repeated re-absorption and re-emission of photons propagates excitation energy transfer over extended length scales with assistance from wave-guided photon transport. Our findings can potentially be used for future studies on the characterization of energy transport mechanisms in semiconductor solids as well as for organic (molecular) self-assembled microstructures.

Ultrafast exciton transport at early times in quantum dot solids

Quantum dot (QD) solids are an emerging platform for developing a range of optoelectronic devices. Thus, understanding exciton dynamics is essential towards developing and optimizing QD devices. Here, using transient absorption microscopy, we reveal the initial exciton dynamics in QDs with femtosecond timescales. We observe high exciton diffusivity (~10² cm² s^-1) in lead chalcogenide QDs within the first few hundred femtoseconds after photoexcitation followed by a transition to a slower regime (~10^-1-1 cm² s^-1). QD solids with larger interdot distances exhibit higher initial diffusivity and a delayed transition to the slower regime, while higher QD packing density and heterogeneity accelerate this transition. The fast transport regime occurs only in materials with exciton Bohr radii much larger than the QD sizes, suggesting the transport of delocalized excitons in this regime and a transition to slower transport governed by exciton localization. These findings suggest routes to control the optoelectronic properties of QD solids.

Effect of PbSO4-Oleate Coverage on Cesium Lead Halide Perovskite Quantum Dots to Control Halide Exchange Kinetics

The selective control of halide ion exchange in metal halide perovskite quantum dots (PQDs) plays an important role in determining their band gap and composition. In this study, CsPbX₃ (X = Cl⁻, Br⁻, and I⁻) PQDs were self-assembled with PbSO₄-oleate to form a peapod-like morphology to selectively control halide ion exchange. Considering the distinct absorption and bright luminescence characteristics of these PQDs, in situ UV-Vis. absorption and fluorescence spectroscopies were employed to monitor the time-dependent band gap and compositional changes of the PQDs. We determined that the halide exchange in the capped PQDs is hindered—unlike the rapid anion exchange in noncapped PQDs—by a reduction in the halide exchange kinetic rate depending on the extent of coverage of the PQDs. Thus, we tracked the halide ion exchange kinetics between CsPbBr₃ and CsPbI₃ PQDs, depending on the coverage, using in situ UV-Vis. absorption/photoluminescence spectroscopy. We regulated the halide exchange reaction rate by varying the capping reaction temperature of the PQDs. The capping hindered the halide exchange kinetics and increased the activation energy. These results will enable the development of white LEDs, photovoltaic cells, and photocatalysts with alternative structural designs based on the divalent composition of CsPbX₃ PQDs.

High Accuracy Ultrafast Spatiotemporal Pump-Probe Measurement of Electrical Thermal Transport in Thin Film Gold

A high resolution spatiotemporal ultrafast pump-probe system is developed to examine the interactions and transport phenomena between the electrical and the lattice thermal subsystems during ultrafast laser-matter interactions. This system incorporates an ultrafast pump-probe scheme with a stationary probe beam that interrogates the response to a spatial scanning pump beam, providing a full spatiotemporal mapping of a material's response due to an ultrafast pump excitation. The material's response, which is highly sensitive to its transport properties, is measured with a high spatial accuracy of up to ±10 nm and subpicosecond time resolution. Details of achieving this high spatial accuracy are described, and a study of the ultrafast transport processes in thin film gold is demonstrated. With the aid of transport and optical response models, the electrical thermal transport properties of gold and the electron-lattice coupling constant are simultaneously determined.

Synthetic and Post-Synthetic Strategies to Improve Photoluminescence Quantum Yields in Perovskite Quantum Dots

Making high-quality raw materials is the key to open the versatile potential of next generation materials. All-inorganic CsPbX3 (X: Cl−, Br−, and/or I−) perovskite quantum dots (PQDs) have been applied in various optoelectronic devices, such as photocatalysis, hydrogen evolution, solar cells, and light-emitting diodes, due to their outstanding photophysical properties, such as high photoluminescence quantum yield (PLQY), absorption cross-section, efficient charge separation, and so on. Specifically, for further improvement of the PLQY of the PQDs, it is essential to diminish the non-radiative charge recombination processes. In this work, we approached two ways to control the non-radiative charge recombination processes through synthetic and post-synthetic processes. Firstly, we proposed how refinement of the conventional recrystallization process for PbI2 contributes to higher PLQY of the PQDs. Secondly, after halide exchange from CsPbI3 PQDs to CsPbBr3, through an in situ spectroelectrochemical setup, we monitored the positive correlation between bromide deposition of on the surface of the perovskite and photoluminescence improvement of the CsPbBr3 perovskite film through electrodeposition. These two strategies could provide a way to enhance the photophysical properties of the perovskites for application to various perovskite-based optoelectronic devices.

Directly visualizing carrier transport and recombination at individual defects within 2D semiconductors

Two-dimensional semiconductors (2DSCs) are promising materials for a wide range of optoelectronic applications. While the fabrication of 2DSCs with thicknesses down to the monolayer limit has been demonstrated through a variety of routes, a robust understanding of carrier transport within these materials is needed to guide the rational design of improved practical devices. In particular, the influence of different types of structural defects on transport is critical, but difficult to interrogate experimentally. Here, a new approach to visualizing carrier transport within 2DSCs, Carrier Generation-Tip Collection Scanning Electrochemical Cell Microscopy (CG-TC SECCM), is described which is capable of providing information at the single-defect level. In this approach, carriers are locally generated within a material using a focused light source and detected as they drive photoelectrochemical reactions at a spatially-offset electrolyte interface created through contact with a pipet-based probe, allowing carrier transport across well-defined, µm-scale paths within a material to be directly interrogated. The efficacy of this approach is demonstrated through studies of minority carrier transport within mechanically-exfoliated n-type WSe2 nanosheets. CG-TC SECCM imaging experiments carried out within pristine basal planes revealed highly anisotropic hole transport, with in-plane and out-of-plane hole diffusion lengths of 2.8 µm and 5.8 nm, respectively. Experiments were also carried out to probe recombination across individual step edge defects within n-WSe2 which suggest a significant surface charge (∼5 mC m-2) exists at these defects, significantly influencing carrier transport. Together, these studies demonstrate a powerful new approach to visualizing carrier transport and recombination within 2DSCs, down to the single-defect level.

Controlling the dimension of the quantum resonance in CdTe quantum dot superlattices fabricated via layer-by-layer assembly

In quantum dot superlattices, wherein quantum dots are periodically arranged, electronic states between adjacent quantum dots are coupled by quantum resonance, which arises from the short-range electronic coupling of wave functions, and thus the formation of minibands is expected. Quantum dot superlattices have the potential to be key materials for new optoelectronic devices, such as highly efficient solar cells and photodetectors. Herein, we report the fabrication of CdTe quantum dot superlattices via the layer-by-layer assembly of positively charged polyelectrolytes and negatively charged CdTe quantum dots. We can thus control the dimension of the quantum resonance by independently changing the distances between quantum dots in the stacking (out-of-plane) and in-plane directions. Furthermore, we experimentally verify the miniband formation by measuring the excitation energy dependence of the photoluminescence spectra and detection energy dependence of the photoluminescence excitation spectra.

Designing quantum dot superlattices remains a challenge. Here, the authors present CdTe quantum dot superlattices via the layer-by-layer assembly and verify the miniband formation by measuring the excitation energy the dependence of the photoluminescence spectra and the detection energy dependence of the excitation spectra.

Long-Range Exciton Diffusion in Two-Dimensional Assemblies of Cesium Lead Bromide Perovskite Nanocrystals

Förster resonant energy transfer (FRET)-mediated exciton diffusion through artificial nanoscale building block assemblies could be used as an optoelectronic design element to transport energy. However, so far, nanocrystal (NC) systems supported only diffusion lengths of 30 nm, which are too small to be useful in devices. Here, we demonstrate a FRET-mediated exciton diffusion length of 200 nm with 0.5 cm²/s diffusivity through an ordered, two-dimensional assembly of cesium lead bromide perovskite nanocrystals (CsPbBr₃ PNCs). Exciton diffusion was directly measured via steady-state and time-resolved photoluminescence (PL) microscopy, with physical modeling providing deeper insight into the transport process. This exceptionally efficient exciton transport is facilitated by PNCs' high PL quantum yield, large absorption cross section, and high polarizability, together with minimal energetic and geometric disorder of the assembly. This FRET-mediated exciton diffusion length matches perovskites' optical absorption depth, thus enabling the design of device architectures with improved performances and providing insight into the high conversion efficiencies of PNC-based optoelectronic devices.

Long Range Energy Transfer in Self-Assembled Stacks of Semiconducting Nanoplatelets

Fluorescent emitters like ions, dye molecules, or semiconductor nanoparticles are widely used in optoelectronic devices, usually within densely packed layers. Their luminescence properties can then be very different from when they are isolated, because of short-range interparticle interactions such as Förster resonant energy transfer (FRET). Understanding these interactions is crucial to mitigate FRET-related losses and could also lead to new energy transfer strategies. Exciton migration by FRET hopping between consecutive neighbor fluorophores has been evidenced in various systems but was generally limited to distances of tens of nanometers and involved only a few emitters. Here, we image self-assembled linear chains of CdSe nanoplatelets (colloidal quantum wells) and demonstrate exciton migration over 500 nm distances, corresponding to FRET hopping over 90 platelets. By comparing a diffusion-equation model to our experimental data, we measure a (1.5 ps)^-1 FRET rate, much faster than all decay mechanisms, so that strong FRET-mediated collective photophysical effects can be expected.

A time-domain view of charge carriers in semiconductor nanocrystal solids

The movement of charge carriers within semiconductor nanocrystal solids is fundamental to the operation of nanocrystal devices, including solar cells, LEDs, lasers, photodetectors, and thermoelectric modules. In this perspective, we explain how recent advances in the measurement and simulation of charge carrier dynamics in nanocrystal solids have led to a more complete picture of mesoscale interactions. Specifically, we show how time-resolved optical spectroscopy and transient photocurrent techniques can be used to track both equilibrium and non-equilibrium dynamics in nanocrystal solids. We discuss the central role of energetic disorder, the impact of trap states, and how these critical parameters are influenced by chemical modification of the nanocrystal surface. Finally, we close with a forward-looking assessment of emerging nanocrystal systems, including anisotropic nanocrystals, such as nanoplatelets, and colloidal lead halide perovskites.

Transforming colloidal Cs4PbBr6 nanocrystals with poly(maleic anhydride-alt-1-octadecene) into stable CsPbBr3 perovskite emitters through intermediate heterostructures

The preparation of strongly emissive CsPbBr3 perovskite nanocrystals with robust surface passivation is a challenge in the field of lead halide perovskite nanomaterials. We report an approach to prepare polymer-capped CsPbBr3 perovskite nanocrystals by reacting oleylammonium/oleate-capped Cs4PbBr6 nanocrystals with poly(maleic anhydride-alt-1-octadecene) (PMAO). PMAO contains succinic anhydride units that are reactive towards the oleylamine species present on the Cs4PbBr6 nanocrystals' surface and produces polysuccinamic acid, which, in turn, triggers the Cs4PbBr6 to CsPbBr3 conversion. The transformation occurs through the formation of Cs4PbBr6-CsPbBr3 heterostructures as intermediates, which are captured because of the mild reactivity of PMAO and are investigated by high-resolution electron microscopy. The Cs4PbBr6-CsPbBr3 heterostructures demonstrate a dual emission at cryogenic temperature with an indication of the energy transfer from Cs4PbBr6 to CsPbBr3. The fully-transformed CsPbBr3 NCs have high photoluminescence quantum yield and enhanced colloidal stability, which we attribute to the adhesion of polysuccinamic acid to the NC surface through its multiple functional groups in place of oleate and alkylammonium ligands. The PMAO-induced transformation of Cs4PbBr6 NCs opens up a strategy for the chemical modification of metal halide NCs initially passivated with nucleophilic amines.

Transient absorption microscopy: Technological innovations and applications in materials science and life science

Transient absorption (TA) spectroscopy has been extensively used in the study of excited state dynamics of various materials and molecules. The transition from TA spectroscopy to TA microscopy, which enables the space-resolved measurement of TA, is opening new investigations toward a more complete picture of excited state dynamics in functional materials, as well as the mapping of crucial biopigments for precision diagnosis. Here, we review the recent instrumental advancement that is pushing the limit of spatial resolution, detection sensitivity, and imaging speed. We further highlight the emerging application in materials science and life science.

Spatially Resolved Photogenerated Exciton and Charge Transport in Emerging Semiconductors

We review recent advances in the characterization of electronic forms of energy transport in emerging semiconductors. The approaches described all temporally and spatially resolve the evolution of initially localized populations of photogenerated excitons or charge carriers. We first provide a comprehensive background for describing the physical origin and nature of electronic energy transport both microscopically and from the perspective of the observer. We introduce the new family of far-field, time-resolved optical microscopies developed to directly resolve not only the extent of this transport but also its potentially temporally and spatially dependent rate. We review a representation of examples from the recent literature, including investigation of energy flow in colloidal quantum dot solids, organic semiconductors, organic-inorganic metal halide perovskites, and 2D transition metal dichalcogenides. These examples illustrate how traditional parameters like diffusivity are applicable only within limited spatiotemporal ranges and how the techniques at the core of this review,especially when taken together, are revealing a more complete picture of the spatiotemporal evolution of energy transport in complex semiconductors, even as a function of their structural heterogeneities.

Ultrafast Dynamic Microscopy of Carrier and Exciton Transport

We highlight the recent progress in ultrafast dynamic microscopy that combines ultrafast optical spectroscopy with microscopy approaches, focusing on the application transient absorption microscopy (TAM) to directly image energy and charge transport in solar energy harvesting and conversion systems. We discuss the principles, instrumentation, and resolutions of TAM. The simultaneous spatial, temporal, and excited-state-specific resolutions of TAM unraveled exciton and charge transport mechanisms that were previously obscured in conventional ultrafast spectroscopy measurements for systems such as organic solar cells, hybrid perovskite thin films, and molecular aggregates. We also discuss future directions to improve resolutions and to develop other ultrafast imaging contrasts beyond transient absorption.

Colloidal semiconductor nanocrystals in energy transfer reactions

Excitonic energy transfer is a versatile mechanism by which colloidal semiconductor nanocrystals can interact with a variety of nanoscale species. This feature article will discuss the latest research on the key scenarios under which semiconductor nanocrystals can engage in energy transfer with other nanoparticles, organic fluorophores, and plasmonic nanostructures, highlighting potential technological benefits to be gained from such processes.

Ultrafast measurements of the dynamics of single nanostructures: a review

The ability to study single particles has revolutionized nanoscience. The advantage of single particle spectroscopy measurements compared to conventional ensemble studies is that they remove averaging effects from the different sizes and shapes that are present in the samples. In time-resolved experiments this is important for unraveling homogeneous and inhomogeneous broadening effects in lifetime measurements. In this report, recent progress in the development of ultrafast time-resolved spectroscopic techniques for interrogating single nanostructures will be discussed. The techniques include far-field experiments that utilize high numerical aperture (NA) microscope objectives, near-field scanning optical microscopy (NSOM) measurements, ultrafast electron microscopy (UEM), and time-resolved x-ray diffraction experiments. Examples will be given of the application of these techniques to studying energy relaxation processes in nanoparticles, and the motion of plasmons, excitons and/or charge carriers in different types of nanostructures.

Exciton-Delocalizing Ligands Can Speed Up Energy Migration in Nanocrystal Solids

Researchers have long sought to use surface ligands to enhance energy migration in nanocrystal solids by decreasing the physical separation between nanocrystals and strengthening their electronic coupling. Exciton-delocalizing ligands, which possess frontier molecular orbitals that strongly mix with nanocrystal band-edge states, are well-suited for this role because they can facilitate carrier-wave function extension beyond the nanocrystal core, reducing barriers for energy transfer. This report details the use of the exciton-delocalizing ligand phenyldithiocarbamate (PDTC) to tune the transport rate and diffusion length of excitons in CdSe nanocrystal solids. A film composed of oleate-terminated CdSe nanocrystals is subjected to a solid-state ligand exchange to replace oleate with PDTC. Exciton migration in the films is subsequently investigated by femtosecond transient absorption. Our experiments indicate that the treatment of nanocrystal films with PDTC leads to rapid (∼400 fs) downhill energy migration (∼80 meV), while no such migration occurs in oleate-capped films. Kinetic Monte Carlo simulations allow us to extract both rates and length scales for exciton diffusion in PDTC-treated films. These simulations reproduce dynamics observed in transient absorption measurements over a range of temperatures and confirm excitons hop via a Miller-Abrahams mechanism. Importantly, our experiments and simulations show PDTC treatment increases the exciton hopping rate to 200 fs, an improvement of 5 orders of magnitude relative to oleate-capped films. This exciton hopping rate stands as one of the fastest determined for CdSe solids. The facile, room-temperature processing and improved transport properties offered by the solid-state exchange of exciton-delocalizing ligands show they offer promise for the construction of strongly coupled nanocrystal arrays.

Top-gated black phosphorus phototransistor for sensitive broadband detection

The present work reports on a graphene-like material that is promising for photodetection applications due to its high optical absorption and layer-dependent properties. To date, only narrowband photodetectors have been realized; therefore, extending the working wavelength is becoming more imperative for applications such as high-contrast imaging and remote sensing. In this work, we developed a novel detection technique that provides enhanced performance across the infrared and terahertz bands by using an antenna-assisted top-gated black phosphorus phototransistor. By using the proposed sophisticated design, the adverse effect due to the back-gate that is generally employed for a long-wavelength photon coupling can be eliminated. Moreover, the antenna-assisted near-field and dark current can be further tailored electromagnetically and electrostatically by employing a gate finger, thus resulting in improved detection efficiency. Various detection mechanisms such as thermoelectric, bolometric, and electron-hole generation are differentiated on the basis of the device geometry and incident wavelength. The proposed photodetector demonstrated superior performance-excellent sensitivity of more than 10 V W-1, a noise equivalent power value of less than 0.1 nW Hz-0.5, and a fast response time across disparate wavebands. Thus, the photodetector can satisfy diverse application requirements.

Optoelectronic Properties of Semiconductor Quantum Dot Solids for Photovoltaic Applications

Quantum dot (QD) solids represent a new type of condensed matter drawing high fundamental and applied interest. Quantum confinement in individual QDs, combined with macroscopic scale whole materials, leads to novel exciton and charge transfer features that are particularly relevant to optoelectronic applications. This Perspective discusses the structure of semiconductor QD solids, optical and spectral properties, charge carrier transport, and photovoltaic applications. The distance between adjacent nanoparticles and surface ligands influences greatly electrostatic interactions between QDs and, hence, charge and energy transfer. It is almost inevitable that QD solids exhibit energetic disorder that bears many similarities to disordered organic semiconductors, with charge and exciton transport described by the multiple trapping model. QD solids are synthesized at low cost from colloidal solutions by casting, spraying, and printing. A judicious selection of a layer sequence involving QDs with different size, composition, and ligands can be used to harvest sunlight over a wide spectral range, leading to inexpensive and efficient photovoltaic devices.

Imaging and Manipulating Energy Transfer Among Quantum Dots at Individual Dot Resolution

Many processes of interest in quantum dots involve charge or energy transfer from one dot to another. Energy transfer in films of quantum dots as well as between linked quantum dots has been demonstrated by luminescence shift, and the ultrafast time-dependence of energy transfer processes has been resolved. Bandgap variation among dots (energy disorder) and dot separation are known to play an important role in how energy diffuses. Thus, it would be very useful if energy transfer could be visualized directly on a dot-by-dot basis among small clusters or within films of quantum dots. To that effect, we report single molecule optical absorption detected by scanning tunneling microscopy (SMA-STM) to image energy pooling from donor into acceptor dots on a dot-by-dot basis. We show that we can manipulate groups of quantum dots by pruning away the dominant acceptor dot, and switching the energy transfer path to a different acceptor dot. Our experimental data agrees well with a simple Monte Carlo lattice model of energy transfer, similar to models in the literature, in which excitation energy is transferred preferentially from dots with a larger bandgap to dots with a smaller bandgap.

Triplet transport in thin films: fundamentals and applications

An overview of experimental and theoretical work on triplet energy transfer, with a focus on triplet transport in thin films.

Therapeutic effect of quantum dots for cancer treatment

The therapeutic effect of Qdots for cancer treatment arises from ROS-induced cell apoptosis and inhibited tumor growth in vivo.