Exceptional Lithium Storage in a Co(OH)2 Anode: Hydride Formation

Electrochemical interfacial catalysis in Co-based battery electrodes involving spin-polarized electron transfer

Interfacial catalysis occurs ubiquitously in electrochemical systems, such as batteries, fuel cells, and photocatalytic devices. Frequently, in such a system, the electrode material evolves dynamically at different operating voltages, and this electrochemically driven transformation usually dictates the catalytic reactivity of the material and ultimately the electrochemical performance of the device. Despite the importance of the process, comprehension of the underlying structural and compositional evolutions of the electrode material with direct visualization and quantification is still a significant challenge. In this work, we demonstrate a protocol for studying the dynamic evolution of the electrode material under electrochemical processes by integrating microscopic and spectroscopic analyses, operando magnetometry techniques, and density functional theory calculations. The presented methodology provides a real-time picture of the chemical, physical, and electronic structures of the material and its link to the electrochemical performance. Using Co(OH)2 as a prototype battery electrode and by monitoring the Co metal center under different applied voltages, we show that before a well-known catalytic reaction proceeds, an interfacial storage process occurs at the metallic Co nanoparticles/LiOH interface due to injection of spin-polarized electrons. Subsequently, the metallic Co nanoparticles act as catalytic activation centers and promote LiOH decomposition by transferring these interfacially residing electrons. Most intriguingly, at the LiOH decomposition potential, electronic structure of the metallic Co nanoparticles involving spin-polarized electrons transfer has been shown to exhibit a dynamic variation. This work illustrates a viable approach to access key information inside interfacial catalytic processes and provides useful insights in controlling complex interfaces for wide-ranging electrochemical systems.

Revealing the effect of LiOH on forming a SEI using a Co magnetic "probe"

The solid-electrolyte-interphase (SEI) plays a critical role in lithium-ion batteries (LIBs) because of its important influence on electrochemical performance, such as cycle stability, coulombic efficiency, etc. Although LiOH has been recognized as a key component of the SEI, its influence on the SEI and electrochemical performance has not been well clarified due to the difficulty in precisely controlling the LiOH content and characterize the detailed interface reactions. Here, a gradual change of LiOH content is realized by different reduction schemes among Co(OH)2, CoOOH and CoO. With reduced Co nanoparticles as magnetic "probes", SEI characterization is achieved by operando magnetometry. By combining comprehensive characterization and theoretical calculations, it is verified that LiOH leads to a composition transformation from lithium ethylene di-carbonate (LEDC) to lithium ethylene mono-carbonate (LEMC) in the SEI and ultimately results in capacity decay. This work unfolds the detailed SEI reaction scenario involving LiOH, provides new insights into the influence of SEI composition, and has value for the co-development between the electrode materials and electrolyte.

Monolayer molybdenum diborides containing flat and buckled boride layers as anode materials for lithium-ion batteries

The materials community is interested in discovering new two-dimensional (2D) crystals because of the potential for fascinating features. In this work, by employing a systematic first-principles DFT analysis and MD simulations, we investigated the potential applications of monolayer Mo borides containing flat and buckled boride rings named P6/mmm and R3̄m MoB₂ as anode materials of lithium-ion batteries. Our preliminary investigations show that the MoB₂ monolayers possess significant structural, thermodynamic, mechanical, and dynamical stability. Due to their distinctive crystal structures, the Mo borides exhibit unique electronic properties, as expected. Additionally, we discovered that the highly negative Li adsorption energy achieved can aid in stabilizing the Li's adsorption on the surface of MoB₂ rather than clustering, which ensured its suitability for LIB anode applications. The low computed Li-ion and Li-vacancy migration energy barrier provides robust charge/discharge performance even at a fully lithiated state, signifying their extraordinary possibility of being a suitable anode material for Li batteries. Both the monolayers can hold a maximum of two layers of Li ions on both sides to give a huge specific capacity of 912 mA h g^-1, much higher than graphene and MoS₂-based anodes. The computed in-plane stiffness constants demonstrate that the monolayer pristine and lithiated MoB₂ satisfies Born's criteria, implying its mechanical flexibility. Additionally, its strong mechanical and thermal properties at the pristine and the lithiated state indicate that the 2D MoB₂ can withstand massive volume expansion at a high temperature of 500 K during the lithiation/de-lithiation reaction and is remarkably beneficial for manufacturing flexible anodes. Based on the above findings, these two newly designed classes of monolayers of MoB₂ are anticipated to open a new avenue for the upcoming generation of lithium-ion batteries.

MgAl Saponite as a Transition-Metal-Free Anode Material for Lithium-Ion Batteries

Transition-metal compounds (oxides, sulfides, hydroxides, etc.) as lithium-ion battery (LIB) anodes usually show extraordinary capacity larger than the theoretical value due to the transformation of LiOH into Li₂O/LiH. However, there has rarely been a report relaying the transformation of LiOH into Li₂O/LiH as the main reaction for LIBs, due to the strong alkalinity of LiOH leading to battery deterioration. In this work, layered silicate MgAl saponite (MA-SAP) is applied as a -OH donor to generate LiOH as the anode material of LIBs for the first time. The MA-SAP maintains a layered structure during the (dis)charging process and has zero-strain characteristic on the (001) crystal plane. In the discharging process, Mg, Al, and Si in the saponite sheets become electron-rich, while the active hydroxyl groups escape from the sheets and combine with lithium ions to form LiOH in the "caves" on sheets, and the LiOH continues to decompose into Li₂O and LiH. Consequently, the MA-SAP delivers a maximum capacity of 536 mA h·g^-1 at 200 mA·g^-1 with a good high-current discharging ability of 155 mA h·g^-1 after 1000 cycles under 1 A·g^-1. Considering its extremely low cost and completely nontoxic characteristics, MA-SAP has great application prospects in energy storage. In addition, this work has an enlightening effect on the development of new anodes based on extraordinary mechanisms.

Enhancing Electrochemical Performance of Co(OH)2 Anode Materials by Introducing Graphene for Next-Generation Li-ion Batteries

To satisfy the growing demand for high-performance batteries, diverse novel anode materials with high specific capacities have been developed to replace commercial graphite. Among them, cobalt hydroxides have received considerable attention as promising anode materials for lithium-ion batteries as they exhibit a high reversible capacity owing to the additional reaction of LiOH, followed by conversion reaction. In this study, we introduced graphene in the fabrication of Co(OH)2-based anode materials to further improve electrochemical performance. The resultant Co(OH)2/graphene composite exhibited a larger reversible capacity of ~1090 mAh g−1, compared with ~705 mAh g−1 for bare Co(OH)2. Synchrotron-based analyses were conducted to explore the beneficial effects of graphene on the composite material. The experimental results demonstrate that introducing graphene into Co(OH)2 facilitates both the conversion and reaction of the LiOH phase and provides additional lithium storage sites. In addition to insights into how the electrochemical performance of composite materials can be improved, this study also provides an effective strategy for designing composite materials.

Controlling Gas Generation of Li-Ion Battery through Divinyl Sulfone Electrolyte Additive

The focus of mainstream lithium-ion battery (LIB) research is on increasing the battery’s capacity and performance; however, more effort should be invested in LIB safety for widespread use. One aspect of major concern for LIB cells is the gas generation phenomenon. Following conventional battery engineering practices with electrolyte additives, we examined the potential usage of electrolyte additives to address this specific issue and found a feasible candidate in divinyl sulfone (DVSF). We manufactured four identical battery cells and employed an electrolyte mixture with four different DVSF concentrations (0%, 0.5%, 1.0%, and 2.0%). By measuring the generated gas volume from each battery cell, we demonstrated the potential of DVSF additives as an effective approach for reducing the gas generation in LIB cells. We found that a DVSF concentration of only 1% was necessary to reduce the gas generation by approximately 50% while simultaneously experiencing a negligible impact on the cycle life. To better understand this effect on a molecular level, we examined possible electrochemical reactions through ab initio molecular dynamics (AIMD) based on the density functional theory (DFT). From the electrolyte mixture’s exposure to either an electrochemically reductive or an oxidative environment, we determined the reaction pathways for the generation of CO₂ gas and the mechanism by which DVSF additives effectively blocked the gas’s generation. The key reaction was merging DVSF with cyclic carbonates, such as FEC. Therefore, we concluded that DVSF additives could offer a relatively simplistic and effective approach for controlling the gas generation in lithium-ion batteries.

Recent Development in Nanoconfined Hydrides for Energy Storage

Hydrogen is the ultimate vector for a carbon-free, sustainable green-energy. While being the most promising candidate to serve this purpose, hydrogen inherits a series of characteristics making it particularly difficult to handle, store, transport and use in a safe manner. The researchers' attention has thus shifted to storing hydrogen in its more manageable forms: the light metal hydrides and related derivatives (ammonia-borane, tetrahydridoborates/borohydrides, tetrahydridoaluminates/alanates or reactive hydride composites). Even then, the thermodynamic and kinetic behavior faces either too high energy barriers or sluggish kinetics (or both), and an efficient tool to overcome these issues is through nanoconfinement. Nanoconfined energy storage materials are the current state-of-the-art approach regarding hydrogen storage field, and the current review aims to summarize the most recent progress in this intriguing field. The latest reviews concerning H2 production and storage are discussed, and the shift from bulk to nanomaterials is described in the context of physical and chemical aspects of nanoconfinement effects in the obtained nanocomposites. The types of hosts used for hydrogen materials are divided in classes of substances, the mean of hydride inclusion in said hosts and the classes of hydrogen storage materials are presented with their most recent trends and future prospects.

Unveiling the Genesis and Effectiveness of Negative Fading in Nanostructured Iron Oxide Anode Materials for Lithium-Ion Batteries

Iron oxide anode materials for rechargeable lithium-ion batteries have garnered extensive attention because of their inexpensiveness, safety, and high theoretical capacity. Nanostructured iron oxide anodes often undergo negative fading, that is, unconventional capacity increase, which results in a capacity increasing upon cycling. However, the detailed mechanism of negative fading still remains unclear, and there is no consensus on the provenance. Herein, we comprehensively investigate the negative fading of iron oxide anodes with a highly ordered mesoporous structure by utilizing advanced synchrotron-based analysis. Electrochemical and structural analyses identified that the negative fading originates from an optimization of the electrolyte-derived surface layer, and the thus formed layer significantly contributes to the structural stability of the nanostructured electrode materials, as well as their cycle stability. This work provides an insight into understanding the origin of negative fading and its influence on nanostructured anode materials.

High Cycle Stability of Hybridized Co(OH)2 Nanomaterial Structures Synthesized by the Water Bath Method as Anodes for Lithium-Ion Batteries

Cobalt oxides have been intensely explored as anodes of lithium-ion batteries to resolve the intrinsic disadvantages of low electrical conductivity and volume change. However, as a precursor of preparing cobalt oxides, Co(OH)₂ has rarely been investigated as the anode material of lithium-ion batteries, perhaps because of the complexity of hydroxides. Hybridized Co(OH)₂ nanomaterial structures were synthesized by the water bath method and exhibited high electrochemical performance. The initial discharge and charge capacities were 1703.2 and 1262.9 mAh/g at 200 mA/g, respectively. The reversible capacity was 1050 mAh/g after 150 cycles. The reversible capability was 1015 mAh/g at 800 mA/g and increased to 1630 mAh/g when driven back to 100 mA/g. The electrochemical reaction kinetics study shows that the lithium-ion diffusion-controlled contribution is dominant in the energy storage mechanism. The superior electrochemical performance could result from the water bath method and the hybridization of nanosheets and nanoparticles structures. These hybridized Co(OH)₂ nanomaterial structures with high electrochemical performance are promising anodes for lithium-ion batteries.

Development of high performance alpha-Co(OH)2/reduced graphene oxide microfilm for flexible in-sandwich and planar micro-supercapacitors

Herein, a series of alpha-Co(OH)₂/reduced graphene oxide (rGO) microfilms and film-based nanodevices were developed via a new scalable technique. Due to the unique hexagonal nanoplates of ultrathin alpha-Co(OH)₂ and the intrinsically conductive nature of rGO sheets, such thin films not only can improve the conductivity of alpha-Co(OH)₂ and prevent the re-stacking of alpha-Co(OH)₂ and rGO sheets but also short the transport routes of electrons and ions between the electrode and the electrolyte. The optimized alpha-Co(OH)₂/rGO flexible electrode presents high specific capacitance (273.86 mF/cm² at 0.1 mA/cm²), advanced rate capability, and excellent coulombic efficiency. Simultaneously, in-sandwich symmetric and asymmetric supercapacitors assembled with polyvinyl alcohol-KOH gel as the solid-state electrolyte achieved high areal and volumetric specific capacitances. Furthermore, a self-assembled planar alpha-Co(OH)₂/rGO micro-supercapacitor (MSC) delivers high specific area capacitance (130F/cm² at 0.5 mA/cm²) and excellent energy density (20 mWh/cm³@56 mW/cm³), which are superior to most of the recently reported carbon-based and metal hydroxides/oxides/sulfides-based planar MSCs. Also, our planar MSC shows excellent cycling performance, good flexibility, and mechanical stability. This work promotes the syntheses of other two-dimensional metal hydroxides/rGO composite film for high-performance flexible micro-electronics.

Co(OH)2 water oxidation cocatalyst-decorated CdS nanowires for enhanced photocatalytic CO2 reduction performance

Photocatalytic CO2 reduction is a promising technology to resolve the greenhouse effect and energy crisis. In this work, a Co(OH)2 nanoparticle decorated CdS nanowire (Co(OH)2/CdS) based heterostructured photocatalyst was prepared via a solvothermal and subsequent co-precipitation method, and it was used for photocatalytic CO2 reduction. The optimal Co(OH)2/CdS photocatalyst achieves a CO production rate of 8.11 μmol g-1 h-1 under visible light irradiation (λ > 420 nm), which is about 2 times higher than that of bare CdS. The experimental results show that a Co(OH)2 cocatalyst possesses a great capability of consuming holes, which promotes the oxygen-producing half-reaction and accelerates charge separation, thus enhancing the CO2 photoreduction performance of CdS. Notably, without using complex synthesis processes, hazardous substances or expensive ingredients, Co(OH)2/CdS shows high light absorption, efficient charge separation and complete CO product selectivity. This work offers a new pathway for the construction of cost-effective photocatalytic materials to achieve highly efficient CO2 reduction activity by the integration of a Co(OH)2 cocatalyst.

Reversible Electron Doping of Layered Metal Hydroxide Nanoplates (M = Co, Ni) Using n-Butyllithium

Ambipolar doping of metal oxides is critical toward broadening the functionality of semiconducting oxides in electronic devices. Most metal oxides, however, show a strong preference for a single doping polarity due to the intrinsic stability of particular defects in an oxide lattice. In this work, we demonstrate that layered metal hydroxide nanomaterials of Co and Ni, which are intrinsically p-doped in their anhydrous rock salt form, can be n-doped using n-BuLi as a strong electron donor. A combination of X-ray characterization techniques reveal that hydroxide vacancy formation, Li⁺ adsorption, and varying degrees of electron delocalization are responsible for the stability of injected electrons. The doped electrons induce conductivity increases of 4-6 orders of magnitude relative to the undoped M(OH)₂. We anticipate that chemical electron doping of layered metal hydroxides may be a general strategy to increase carrier concentration and stability for n-doping of intrinsically p-type metal oxides.

Multifunctionalities of Graphene for Exploiting a Facile Conversion Reaction Route of Perovskite CoSnO3 for Highly Reversible Na Ion Storage

Transition-metal oxides are promising anode materials for sodium ion batteries (SIBs) and have attracted a great deal of attention because of their natural abundance and high theoretical capacities. However, they suffer from low conductivity and large volumetric/structural variation during sodiation/desodiation processes, leading to unsatisfactory cycling stability and poor rate capability. This study proposes a novel conversion reaction using CoSnO₃ (CSO) nanocubes uniformly wrapped in graphene nanosheets, which are fabricated using a wet-chemical strategy followed by low-temperature heat treatment. This optimized composite exhibits durable cyclability and high rate capability, which can be attributed to the strong interaction between reduced graphene oxide and CSO through its surface oxygen moieties. It develops a facile conversion reaction route, thereby leading to SnO₂ formation during charging. This interactive phenomenon further contributes to improving the reaction kinetics and restraining the volume expansion during cycling. This study may provide a facile approach for addressing irreversible conversion of high-capacity oxide materials toward advanced SIBs.

Graphene oxide induced assembly and crumpling of Co3O4 nanoplates

Cobalt (II, III) oxide (Co₃O₄) has been widely studied and applied in various fields, however, it suffers from slow mass and electron transfer during applications. Herein, crumpled Co₃O₄ and Co₃O₄/reduced graphene oxide (rGO) with tunable 2D-in-3D structures were prepared by combining spray pyrolysis with a graphene oxide (GO) template. The 2D Co₃O₄ nanoplates were interconnected with each other to form a 3D ball with many wrinkles, resulting in defect enrichment on the abundant boundaries of the nanosheets, which provided more active sites for catalytic reactions. In addition, the unique 2D-in-3D structure allowed fast mass transfer and structural stability. Furthermore, the assembled structure could be understood as being composed of uniformly distributed oxygen-containing functional groups pinning metal cations on the GO surface through electrostatic interaction, and the 2D structure of the GO enabled the in situ converted Co₃O₄ to grow along the GO surface with excellent dispersion. Taking advantage of the above, the Co₃O₄/rGO balls demonstrated an excellent oxygen evolution reaction performance, an overpotential of 298 mV at a current density of 10.0 mA cm^-2 and a current density of 115.9 mA cm^-2 at the overpotential of η = 500 mV.

Achieving High Lithium Storage Capacity and Long-Term Cyclability of Novel Cobalt Germanate Hydroxide/Reduced Graphene Oxide Anodes with Regulated Electrochemical Catalytic Conversion Process of Hydroxyl Groups

To develop ternary transition-metal germanate anodes with superior lithium storage performances for lithium-ion batteries, a novel capacity counterbalance approach in one compound is designed by introducing an electrocatalytic conversion-type component with a positive cycling trend to compensate the negative cycling trend of the GeO₂ component. Novel cobalt germanate hydroxide (CGH) nanoplates chemically bonded on reduced graphene oxide (RGO) sheets are thus synthesized with a mild one-pot hydrothermal approach, constructing maximal face-to-face contact interfaces with interfacial bonds to boost the electrochemical conversion reactions. Furthermore, the hydroxyl groups (Co-OH) of CGH nanoplates are regulated by thermal annealing treatments, thus controlling the capacity contribution resulting from the electrocatalytic conversion reaction of LiOH to exactly offset the capacity fading of GeO₂. The results on the CGH electrodes at different cycling potentials confirm the stepwise electrochemical reactions of Co, GeO₂, and LiOH. The equilibrium of these electrochemical reactions ensures a stable cycling capacity without obvious fluctuations. Consequently, the optimal CGH/RGO hybrid anode delivers a reversible capacity as high as 1136 mA h g^-1 at 0.1 A g^-1 until 100 cycles. It also exhibits a long cyclability with a retained capacity of 560 mA h g^-1 at 1 A g^-1 until 1000 cycles. This work demonstrates a general and efficient capacity counterbalance method to highly boost lithium storage performances in terms of high capacity and long-term cyclability.

Cobalt Hydroxide Carbonate/Reduced Graphene Oxide Anodes Enabled by a Confined Step-by-Step Electrochemical Catalytic Conversion Process for High Lithium Storage Capacity and Excellent Cyclability with a Low Variance Coefficient

Transition metal carbonates/hydroxides have attracted much attention as appealing anode materials due to their considerable reversible electrochemical catalytic conversion capacity. However, their serious positive or negative trends with cycles caused by the electrochemical catalytic conversion seriously affect their practical applications. Herein, novel one-dimensional cobalt hydroxide carbonate (CHC) nanomaterials are tightly anchored on reduced graphene oxide (RGO) sheets via a facile one-pot hydrothermal synthesis, forming surface-confined domains to further restrict the electrochemical catalytic conversion process. The analysis on the cycled electrodes at varied potentials confirms that the added capacity of CHC arises from the step-by-step reversible reactions of Li₂CO₃ and LiOH under the electrochemical catalysis of Co metal generated by the conversion reaction of CHC. The reversible reaction of Li₂CO₃ is followed closely by that of LiOH in the discharge process, while the order is opposite in the charge process. Such a step-by-step electrochemical catalytic conversion process could confine each other to accommodate the volume change and avoid side reactions. The confined effect is further enhanced by limiting the width and length of the CHC, which are determined by regulating the nucleation and growth of CHC on the surface of RGO, leading to an extraordinary cyclability. The optimized CHC/RGO hybrid maintains a high reversible capacity of 1110 mA h g^-1 after 100 cycles at 0.1 A g^-1, which is much higher than the theoretical value of CHC (506 mA h g^-1) on the basis of the recognized conversion reaction. Furthermore, it keeps high reversible capacities of 755 and 506 mA h g^-1 after 200 cycles at 1 and 2 A g^-1, respectively, exhibiting a high-rate cyclability with the lowest coefficient of variance of 9.4% among the reported ones. The confined step-by-step electrochemical catalytic conversion process facilitates high lithium storage capacity and satisfactory cyclability with a pretty low variance coefficient.

Corrosion Engineering To Synthesize Ultrasmall and Monodisperse Alloy Nanoparticles Stabilized in Ultrathin Cobalt (Oxy)hydroxide for Enhanced Electrocatalysis

Two-dimensional (2D) nanomaterials decorated with ultrasmall and well-alloyed bimetallic nanoparticles (NPs) have many important applications. Developing a facile and scalable 2D material/hybrid synthesis strategy is still a big challenge. Herein, a top-down corrosion strategy is developed to prepare ultrathin cobalt (oxy)hydroxide nanosheets decorated with ultrasmall (∼1.6 nm) alloy NPs. The formation of ultrathin (oxy)hydroxide nanosheets has a restrain effect to prevent the growth of small NPs into bigger ones. Thanks to the ultrathin 2D nature and strong electronic interaction between Co(OH)₂ and alloy NPs, the Pt-based binary alloy NPs are greatly stabilized by the Co(OH)₂ nanosheets and the hybrids exhibit much enhanced electrocatalytic performance for water splitting. Especially, the mass activities of the PtPd- and PtCu-decorated samples for hydrogen evolution are ∼8 times that of Pt/C. When used as both cathode and anode electrocatalysts to split water, the hybrid nanosheets outperform the commercial Pt/C-RuO₂ combination. At 10 mA cm^-2, the needed potential is only 1.53 V. This work provides us a highly controllable and scalable means to produce clean 2D nanomaterials decorated with a series of alloy NPs such as PtPd, PtCu, AuNi, and so forth.

Coordination Polymers for High-Capacity Li-Ion Batteries: Metal-Dependent Solid-State Reversibility

Electrode materials exploiting multielectron-transfer processes are essential components for large-scale energy storage systems. Organic-based electrode materials undergoing distinct molecular redox transformations can intrinsically circumvent the structural instability issue of conventional inorganic-based host materials associated with lattice volume expansion and pulverization. Yet, the fundamental mechanistic understanding of metal-organic coordination polymers toward the reversible electrochemical processes is still lacking. Herein, we demonstrate that metal-dependent spatial proximity and binding affinity play a critical role in the reversible redox processes, as verified by combined ¹³C solid-state NMR, X-ray absorption spectroscopy, and transmission electron microscopy. During the electrochemical lithiation, in situ generated metallic nanoparticles dispersed in the organic matrix generate electrically conductive paths, synergistically aiding subsequent multielectron transfer to π-conjugated ligands. Comprehensive screening on 3d-metal-organic coordination polymers leads to a high-capacity electrode material, cobalt-2,5-thiophenedicarboxylate, which delivers a stable specific capacity of ∼1100 mA h g^-1 after 100 cycles.