Fast Energy Storage in Two-Dimensional MoO2 Enabled by Uniform Oriented Tunnels

Understanding How the Suppression of Insertion-Induced Phase Transitions Leads to Fast Charging in Nanoscale LixMoO2

Fast-charging Li-ion batteries are technologically important for the electrification of transportation and the implementation of grid-scale storage, and additional fundamental understanding of high-rate insertion reactions is necessary to overcome current rate limitations. In particular, phase transformations during ion insertion have been hypothesized to slow charging. Nanoscale materials with modified transformation behavior often show much faster kinetics, but the mechanism for these changes and their specific contribution to fast-charging remain poorly understood. In this work, we combine operando synchrotron X-ray diffraction with electrochemical kinetics analyses to illustrate how nanoscale crystal size leads to suppression of first-order insertion-induced phase transitions and their negative kinetic effects in MoO2, a tunnel structure host material. In electrodes made with micrometer-scale particles, large first-order phase transitions during cycling lower capacity, slow charge storage, and decrease cycle life. In medium-sized nanoporous MoO2, the phase transitions remain first-order, but show a considerably smaller miscibility gap and shorter two-phase coexistence region. Finally, in small MoO2 nanocrystals, the structural evolution during lithiation becomes entirely single-phase/solid-solution. For all nanostructured materials, the changes to the phase transition dynamics lead to dramatic improvements in capacity, rate capability, and cycle life. This work highlights the continuous evolution from a kinetically hindered battery material in bulk form to a fast-charging, pseudocapacitive material through nanoscale size effects. As such, it provides key insight into how phase transitions can be effectively controlled using nanoscale size and emphasizes the importance of these structural dynamics to the fast rate capability observed in nanostructured electrode materials.

Single Atom Iridium Decorated Nickel Alloys Supported on Segregated MoO2 for Alkaline Water Electrolysis

Hetero-interface engineering has been widely employed to develop supported multicomponent catalysts for water electrolysis, but it still remains a substantial challenge for supported single atom alloys. Herein a conductive oxide MoO2 supported Ir1 Ni single atom alloys (Ir1 Ni@MoO2 SAAs) bifunctional electrocatalysts through surface segregation coupled with galvanic replacement reaction, where the Ir atoms are atomically anchored onto the surface of Ni nanoclusters via the Ir-Ni coordination accompanied with electron transfer from Ni to Ir is reported. Benefiting from the unique structure, the Ir1 Ni@MoO2 SAAs not only exhibit low overpotential of 48.6 mV at 10 mA cm-2 and Tafel slope of 19 mV dec-1 for hydrogen evolution reaction, but also show highly efficient alkaline water oxidation with overpotential of 280 mV at 10 mA cm-2 . Their overall water electrolysis exhibits a low cell voltage of 1.52 V at 10 mA cm-2 and excellent durability. Experiments and theoretical calculations reveal that the Ir-Ni interface effectively weakens hydrogen binding energy, and decoration of the Ir single atoms boost surface reconstruction of Ni species to enhance the coverage of intermediates (OH*) and switch the potential-determining step. It is suggested that this approach opens up a promising avenue to design efficient and durable precious metal bifunctional electrocatalysts.

Synergistically Stabilizing Zinc Anodes by Molybdenum Dioxide Coating and Tween 80 Electrolyte Additive for High-Performance Aqueous Zinc-Ion Batteries

Recently, aqueous zinc-ion batteries (ZIBs) have become increasingly attractive as grid-scale energy storage solutions due to their safety, low cost, and environmental friendliness. However, severe dendrite growth, self-corrosion, hydrogen evolution, and irreversible side reactions occurring at Zn anodes often cause poor cyclability of ZIBs. This work develops a synergistic strategy to stabilize the Zn anode by introducing a molybdenum dioxide coating layer on Zn (MoO2@Zn) and Tween 80 as an electrolyte additive. Due to the redox capability and high electrical conductivity of MoO2, the coating layer can not only homogenize the surface electric field but also accommodate the Zn2+ concentration field in the vicinity of the Zn anode, thereby regulating Zn2+ ion distribution and inhibiting side reactions. MoO2 coating can also significantly enhance surface hydrophilicity to improve the wetting of electrolyte on the Zn electrode. Meanwhile, Tween 80, a surfactant additive, acts as a corrosion inhibitor, preventing Zn corrosion and regulating Zn2+ ion migration. Their combination can synergistically work to reduce the desolvation energy of hydrated Zn ions and stabilize the Zn anodes. Therefore, the symmetric cells of MoO2@Zn∥MoO2@Zn with optimal 1 mM Tween 80 additive in 1 M ZnSO4 achieve exceptional cyclability over 6000 h at 1 mA cm-2 and stability (>700 h) even at a high current density (5 mA cm-2). When coupling with the VO2 cathode, the full cell of MoO2@Zn∥VO2 shows a higher capacity retention (82.4%) compared to Zn∥VO2 (57.3%) after 1000 cycles at 5 A g-1. This study suggests a synergistic strategy of combining surface modification and electrolyte engineering to design high-performance ZIBs.

High-Voltage MXene-Based Supercapacitors: Present Status and Future Perspectives

As an emerging class of 2D materials, MXene exhibits broad prospects in the field of supercapacitors (SCs). However, the working voltage of MXene-based SCs is relatively limited (typically ≤ 0.6 V) due to the oxidation of MXene electrode and the decomposition of electrolyte, ultimately leading to low energy density of the device. To solve this issue, high-voltage MXene-based electrodes and corresponding matchable electrolytes are developed urgently to extend the voltage window of MXene-based SCs. Herein, a comprehensive overview and systematic discussion regarding the effects of electrolytes (aqueous, organic, and ionic liquid electrolytes), asymmetric device configuration, and material modification on the operating voltage of MXene-based SCs, is presented. A deep dive is taken into the latest advances in electrolyte design, structure regulation, and high-voltage mechanism of MXene-based SCs. Last, the future perspectives on high-voltage MXene-based SCs and their possible development directions are outlined and discussed in depth, providing new insights for the rational design and realization of advanced next-generation MXene-based electrodes and high-voltage electrolytes.

Stable Multicomponent Multiphase All Active Material Lithium-Ion Battery Anodes

Due to their high energy density, lithium-ion batteries have been the state-of-the-art energy storage technology for many applications. Energy density can be further improved by engineering of the electrode architecture and microstructure, in addition to more common improvements via materials chemistry. All active material (AAM) electrodes consist of only the electroactive material that stores energy, and such electrodes have advantages to conventional composite processing with regards to improved mechanical stability at increased thicknesses and ion transport properties. However, the absence of binders and composite processing makes the electrode more vulnerable to electroactive materials with volume change upon cycling. Also, the electroactive material must have sufficient electronic conductivity to avoid large matrix electronic overpotentials during electrochemical cycling. TiNb₂O₇ (TNO) and MoO₂ (MO) are electroactive materials with potential advantages as AAM electrodes due to relatively high volumetric energy density. TNO has higher energy density, and MO has much higher electronic conductivity, and thus a multicomponent blend of these materials was evaluated as an AAM anode. Herein, blends of TNO and MO as AAM anodes were investigated, where this is the first use of a multicomponent AAM anode. Electrodes that had both TNO and MO had the highest volumetric energy density, rate capability, and cycle life relative to single component TNO and MO anodes. Thus, using multicomponent materials provides a route to improve AAM electrochemical systems.

A Pseudocapacitor Diode Based on Ion-Selective Surface Redox Effect

Supercapacitor diode (CAPode) is a novel device that integrates ion diode functionality into a conventional electrical double-layer capacitor and is expected to have great applications in emerging fields such as signal propagation, microcircuit rectification, logic operations, and neuromorphology. Here, a brand new pseudocapacitor diode is reported that has both high charge storage (50.2 C g^-1 at 20 mV s^-1 ) and high rectification (the rectification ratio of 0.79 at 200 mV s^-1 ) properties, which is realized by the ion-selective surface redox reaction of spinel ZnCo₂ O₄ in aqueous alkaline electrolyte. Furthermore, an application of the integrated device is demonstrated in the logic gate of circuit system to realize the logic operations of "AND" and "OR". This work not only expands the types of CAPodes, but also provides a train of thought for constructing high-performance capacitive ionic diodes.

Enhanced Kinetic Behaviors of Hollow MoO2/MoS2 Nanospheres for Sodium-Ion-Based Energy Storage

Mo-based heterostructures offer a new strategy to improve the electronics/ion transport and diffusion kinetics of the anode materials for sodium-ion batteries (SIBs). MoO₂/MoS₂ hollow nanospheres have been successfully designed via in-situ ion exchange technology with the spherical coordination compound Mo-glycerates (MoG). The structural evolution processes of pure MoO₂, MoO₂/MoS₂, and pure MoS₂ materials have been investigated, illustrating that the structureofthenanospherecan be maintained by introducing the S-Mo-S bond. Based on the high conductivity of MoO₂, the layered structure of MoS₂ and the synergistic effect between components, as-obtained MoO₂/MoS₂ hollow nanospheres display enhanced electrochemical kinetic behaviors for SIBs. The MoO₂/MoS₂ hollow nanospheres achieve a rate performance with 72% capacity retention at a current of 3200 mA g^-1 compared to 100 mA g^-1. The capacity can be restored to the initial capacity after a current returns to 100 mA g^-1, while the capacity fading of pure MoS₂ is up to 24%. Moreover, the MoO₂/MoS₂ hollow nanospheres also exhibit cycling stability, maintaining a stable capacity of 455.4 mAh g^-1 after 100 cycles at a current of 100 mA g^-1. In this work, the design strategy for the hollow composite structure provides insight into the preparation of energy storage materials.

One-Step Hydrothermal Synthesis of MoO2/MoS2 Nanocomposites as High-Performance Electrode Material for Supercapacitors

By only changing the ratio of Mo to S source, a distinctive single phase MoO2 or MoS2 and MoO2/MoS2 nanocomposites (NCs) are obtained through a simple one-step hydrothermal method based on CH4N2S as a sulfur source and (NH4)6Mo7O24·4H2O as a source of Mo in oxalic acid. The effect of ratio of Mo to S source on the composition, structure, and electrochemical performance are systematically researched. Due to its unique design, abundant macropores active sites in MoO2/MoS2 NCs induce superior rate property (55.30% capacitance retention to 20 from 1 A g-1) and larger specific capacitance (1667.3 F g-1 at 1 A g-1) and longer cycle life (94.75% after 5000 cycles) as used directly as an electrode. Furthermore, at a power density of 225 W kg-1, a maximal energy density of 21.85 Wh kg-1 is provided by the asymmetric supercapacitor (MoO2/MoS2//AC). The capacitance of asymmetric supercapacitor (ASC) is remarkably enhanced by 129.02% under 5000 cycles at a current density of 1.5 A g-1, demonstrating outstanding cycle property. These results imply the prepared MoO2/MoS2 NCs have promising applications in advanced energy storages. It is important and should be noted that NCs of oxide and sulfide are prepared with only a simple one-step process.

Toward understanding the phase-selective growth mechanism of films and geometrically-shaped flakes of 2D MoTe2

Two-dimensional (2D) molybdenum ditelluride (MoTe₂) is an interesting material for fundamental study and applications, due to its ability to exist in different polymorphs of 2H, 1T, and 1T′, their phase change behavior, and unique electronic properties. Although much progress has been made in the growth of high-quality flakes and films of 2H and 1T′-MoTe₂ phases, phase-selective growth of all three phases remains a huge challenge, due to the lack of enough information on their growth mechanism. Herein, we present a novel approach to growing films and geometrical-shaped few-layer flakes of 2D 2H-, 1T-, and 1T′-MoTe₂ by atmospheric-pressure chemical vapor deposition (APCVD) and present a thorough understanding of the phase-selective growth mechanism by employing the concept of thermodynamics and chemical kinetics involved in the growth processes. Our approach involves optimization of growth parameters and understanding using thermodynamical software, HSC Chemistry. A lattice strain-mediated mechanism has been proposed to explain the phase selective growth of 2D MoTe₂, and different chemical kinetics-guided strategies have been developed to grow MoTe₂ flakes and films.

This study investigates the phase-controlled growth of flakes and films of 2D MoTe₂ by atmospheric-pressure chemical vapor deposition and presents a thorough understanding on the growth mechanism.

Micrometer-Sized, Dual-Conductive MoO2 /β-MoO3- x Mosaics for High Volumetric Capacity Li/Na-Ion Batteries

The transition metal oxides (TMOs) with high volumetric capacities are promising anodes for the future electronics, however, they usually suffer from severe capacity decay and poor rate capability. Carbon hybridization and nanosizing can resolve these challenges, yet these significantly compromise the volumetric capacity. Herein, both high capacity and long cycling stability are simultaneously achieved in the micrometer-sized Mo-based oxide particles by designing the dual conductive MoO₂ /β-MoO_{3- x} mosaics. The rational combination of the highly electronically conductive MoO₂ with the highly ionically conductive and open-structured β-MoO₃ achieves a promising volumetric capacity of 1742 mAh cm^-3 , which is four times higher than the commercial graphite. Simultaneously, both stable cycling performance (87% retention after 500 cycles) and excellent rate capability (outperformed a majority of the MoO₂ -based anodes reported in literature) are obtained in the lithium-ion batteries. For the sodium-ion batteries, the composite exhibits three times higher Na⁺ storage than pure MoO₂ . Moreover, the decisive role of the bond energy on the electrochemical performance of TMOs is also identified. This study may open up new perspectives for choosing and designing the TMO anodes with a high volumetric capacity for the practical applications.

MoO2 coated few layers of MoS2 and FeS2 nanoflower decorated S-doped graphene interoverlapped network for high-energy asymmetric supercapacitor

Herein, the ultra-thin layer MoS₂ coverd MoO₂ nanocrystal arraying on sulfur-doped graphene framework (MoS₂-MoO₂/3DSG) is obtained via a simple hydrothermal procedure accompanied with high temperature annealing. Sodium thiosulfate and ethanethiol are used as sulfur sources to form three-dimensional sulfur doped graphene (3DSG) in the hydrothermal process. Importantly, MoO₂ nano-particles are uniformly loaded on MoS₂ nanosheets and 3DSG via in-situ collaborative technology. As a result, the stable conductive network take full use of the characteristics of high specific capacitance of MoO₂ nanoparticles, convenient ion transport channel of two-dimensional MoS₂ nanoflakes and efficient charge transfer and cross-linked 3DSG to improve the electrochemical activity and enhance the dynamics of electrons / ions, which is up to 1150.37 F g^-1 specific capacitance and maintains 94.6% of the original capacitance after 10,000 cycles. Also, FeS₂ nanoflowers in situ loading on 3DSG (FeS₂/3DSG) with enhanced the overall performance of the device are fabricated. The asymmetric supercapacitor with the positive electrode of MoS₂-MoO₂/3DSG and the negative electrode of FeS₂/3DSG can work efficiently and stably under the voltage of 1.7 V, and provide energy density of 87.38 Wh kg^-1 at the power density of 683.94 Wkg^-1, displaying an outstanding application prospect for energy storage.

Comparative Studies on Two-Dimensional (2D) Rectangular and Hexagonal Molybdenum Dioxide Nanosheets with Different Thickness

Molybdenum dioxide (MoO₂) a kind of semi-metal material shows many unique properties, such as high melting point, good thermal stability, large surface area-to-volume ratio, high-density surface unsaturated atoms, and excellent conductivity. There is a strong connection between structural type and optoelectronic properties of 2D nanosheet. Herein, the rectangular and hexagonal types of thin and thick MoO₂ 2D nanosheets were successfully prepared from MoO₃ powder using two-zone chemical vapor deposition (CVD) with changing the experimental parameters, and these fabricated nanosheets displayed different colors under bright-field microscope, possess margins and smooth surface. The thickness of the blue hexagonal and rectangular MoO₂ nanosheets are ~ 25 nm and ~ 30 nm, respectively, while typical thickness of orange-colored nanosheet is around ~ 100 nm. Comparative analysis and investigations were carried out, and mix-crystal phases were indentified in thick MoO₂ as main matrix through Raman spectroscopy. For the first time, the emission bands obtained in thick MoO₂ nanosheets via a Cathodoluminescence (CL) system exhibiting special properties of semi-metallic and semi-conductors; however, no CL emission detected in case of thin nanosheets. The electrical properties of thin MoO₂ nanosheets with different morphologies were compared, and both of them demonstrated varying metallic properties. The resistance of thin rectangular nanosheet was ~ 25 Ω at ± 0.05 V while 64 Ω at ± 0.05 V was reported for hexagonal nanosheet, and observed lesser resistance by rectangular nanosheet than hexagonal nanosheet.