Mechanical Properties and Biocompatibility of Ti-doped Diamond-like Carbon Films

Carbon materials and their metal composites for biomedical applications: A short review

Carbon materials and their hybrid metal composites have garnered significant attention in biomedical applications due to their exceptional biocompatibility. This biocompatibility arises from their inherent chemical stability and low toxicity within biological systems. This review offers a comprehensive overview of carbon nanomaterials and their metal composites, emphasizing their biocompatibility-focused applications, including drug delivery, bioimaging, biosensing, and tissue engineering. The paper outlines advancements in surface modifications, coatings, and functionalization techniques designed to enhance the biocompatibility of carbon materials, ensuring minimal adverse effects in biological systems. A comprehensive investigation into hybrid composites integrating carbon nanomaterials is conducted, categorizing them as fullerenes, carbon quantum dots, carbon nanotubes, carbon nanofibers, graphene, and diamond-like carbon. The concluding section addresses regulatory considerations and challenges associated with integrating carbon materials into medical devices. This review culminates by providing insights into current achievements, challenges, and future directions, underscoring the pivotal role of carbon nanomaterials and their metal composites in advancing biocompatible applications.

Titanium-Doped Diamond-like Carbon Layers as a Promising Coating for Joint Replacements Supporting Osteogenic Differentiation of Mesenchymal Stem Cells

Diamond-like carbon (DLC) layers are known for their high corrosion and wear resistance, low friction, and high biocompatibility. However, it is often necessary to dope DLC layers with additional chemical elements to strengthen their adhesion to the substrate. Ti-DLC layers (doped with 0.4, 2.1, 3.7, 6.6, and 12.8 at.% of Ti) were prepared by dual pulsed laser deposition, and pure DLC, glass, and polystyrene (PS) were used as controls. In vitro cell-material interactions were investigated with an emphasis on cell adhesion, proliferation, and osteogenic differentiation. We observed slightly increasing roughness and contact angle and decreasing surface free energy on Ti-DLC layers with increasing Ti content. Three-week biological experiments were performed using adipose tissue-derived stem cells (ADSCs) and bone marrow mesenchymal stem cells (bmMSCs) in vitro. The cell proliferation activity was similar or slightly higher on the Ti-doped materials than on glass and PS. Osteogenic cell differentiation on all materials was proved by collagen and osteocalcin production, ALP activity, and Ca deposition. The bmMSCs exhibited greater initial proliferation potential and an earlier onset of osteogenic differentiation than the ADSCs. The ADSCs showed a slightly higher formation of focal adhesions, higher metabolic activity, and Ca deposition with increasing Ti content.

Electrophoretic-deposited MXene titanium coatings in regulating bacteria and cell response for peri-implantitis

Background: Two-dimensional(2D)MXenes have continued to receive increasing interest from researchers due to their graphene-like properties, in addition to their versatile properties for applications in electronic devices, power generation, sensors, drug delivery, and biomedicine. However, their construction and biological properties as titanium coatings to prevent peri-implantitis are still unclear.

Materials and methods: In this work, few-layer Ti₃C₂T_x MXene coatings with different thicknesses at varied depositing voltages (30, 40, and 50 V) were constructed by anodic electrophoretic deposition without adding any electrolytic ions. In vitro cytocompatibility assay was performed on preosteoblasts (MC3T3-E1) cell lines after the characterization of the coating. Meanwhile, the antibacterial activity against bacteria which are closely related to peri-implantitis including Staphylococcus aureus (S. aureus) and its drug-resistant strain MRSA was further investigated.

Results: MXene-coated titanium models with different thicknesses were successfully assembled by analyzing the results of characterization. The compounding of Ti₃C₂T_x could significantly improve the initial adhesion and proliferation of MC3T3-E1 cells. Moreover, the coating can effectively inhibit the adhesion and cell activity of S. aureus and MRSA, and MRSA expressed greater restricting behavior than S. aureus. The ability to promote antibacterial activity is proportional to the content of Ti₃C₂T_x. Its antioxidant capacity to reduce ROS in the culture environment and bacterial cells was first revealed.

Conclusion: In summary, this work shows a new avenue for MXene-based nano-biomaterials under the clinical problem of multiple antibiotic resistance.

Thermal Behaviors, Interfacial Microstructure and Molecular Orientation of Shape Memory Polyurethane/SiO2 Based Sealant for Concrete Pavement

Expansion joint failure is one of the main causes that lead to the damages of concrete pavement. The silicon dioxide/shape memory polyurethane (SiO₂/SMPU) is a new kind of sealant which can use its shape memory performance to adapt to the width of the expansion joint with the change of pavement temperature, and it can effectively prolong the service life of the pavement and reduce maintenance costs. In this study, the effects of programming and the addition of SiO₂ particles to the thermodynamic properties of the specimens were detected using differential scanning calorimetry (DSC), the optimal shape memory programming temperature of which is 72.9 °C. Combined with scanning electron microscopy (SEM) and shape memory effect test, the particles are evenly distributed between the two phases, and the shape fixation rate (R_f) of 98.15% and the shape recovery rate (R_r) of 97.31% show that the composite has a good shape memory effect. Fourier transform infrared spectroscopy (FTIR) and dynamic infrared dichroism illustrate the change of the hydrogen bond of soft and hard segments with the SiO₂ particles in the shape memory cycle, revealing the optimal shape memory programming process. This study provides an insight into the reinforcement mechanism of SiO₂ nanoparticles in SMPU matrix and verify whether it can meet the engineering requirements of expansion joints when used as a sealant of concrete pavement.

A Review on Biomaterials for Orthopaedic Surgery and Traumatology: From Past to Present

The principal features essential for the success of an orthopaedic implant are its shape, dimensional accuracy, and adequate mechanical properties. Unlike other manufactured products, chemical stability and toxicity are of increased importance due to the need for biocompatibility over an implants life which could span several years. Thus, the combination of mechanical and biological properties determines the clinical usefulness of biomaterials in orthopaedic and musculoskeletal trauma surgery. Materials commonly used for these applications include stainless steel, cobalt-chromium and titanium alloys, ceramics, polyethylene, and poly(methyl methacrylate) (PMMA) bone cement. This study reviews the properties of commonly used materials and the advantages and disadvantages of each, with special emphasis on the sensitivity, toxicity, irritancy, and possible mutagenic and teratogenic capabilities. In addition, the production and final finishing processes of implants are discussed. Finally, potential directions for future implant development are discussed, with an emphasis on developing advanced personalised implants, according to a patient’s stature and physical requirements.

Carbon-Based Materials for Articular Tissue Engineering: From Innovative Scaffolding Materials toward Engineered Living Carbon

Carbon materials constitute a growing family of high-performance materials immersed in ongoing scientific technological revolutions. Their biochemical properties are interesting for a wide set of healthcare applications and their biomechanical performance, which can be modulated to mimic most human tissues, make them remarkable candidates for tissue repair and regeneration, especially for articular problems and osteochondral defects involving diverse tissues with very different morphologies and properties. However, more systematic approaches to the engineering design of carbon-based cell niches and scaffolds are needed and relevant challenges should still be overcome through extensive and collaborative research. In consequence, this study presents a comprehensive description of carbon materials and an explanation of their benefits for regenerative medicine, focusing on their rising impact in the area of osteochondral and articular repair and regeneration. Once the state-of-the-art is illustrated, innovative design and fabrication strategies for artificially recreating the cellular microenvironment within complex articular structures are discussed. Together with these modern design and fabrication approaches, current challenges, and research trends for reaching patients and creating social and economic impacts are examined. In a closing perspective, the engineering of living carbon materials is also presented for the first time and the related fundamental breakthroughs ahead are clarified.

An Amorphous Peri-Implant Ligament with Combined Osteointegration and Energy-Dissipation

Progress toward developing metal implants as permanent hard-tissue substitutes requires both osteointegration to achieve load-bearing support, and energy-dissipation to prevent overload-induced bone resorption. However, in existing implants these two properties can only be achieved separately. Optimized by natural evolution, tooth-periodontal-ligaments with fiber-bundle structures can efficiently orchestrate load-bearing and energy dissipation, which make tooth-bone complexes survive extremely high occlusion loads (>300 N) for prolonged lifetimes. Here, a bioinspired peri-implant ligament with simultaneously enhanced osteointegration and energy-dissipation is presented, which is based on the periodontium-mimetic architecture of a polymer-infiltrated, amorphous, titania nanotube array. The artificial ligament not only provides exceptional osteoinductivity owing to its nanotopography and beneficial ingredients, but also produces periodontium-similar energy dissipation due to the complexity of the force transmission modes and interface sliding. The ligament increases bone-implant contact by more than 18% and simultaneously reduces the effective stress transfer from implant to peri-implant bone by ≈30% as compared to titanium implants, which as far as is known has not previously been achieved. It is anticipated that the concept of an artificial ligament will open new possibilities for developing high-performance implanted materials with increased lifespans.

Corrosion Behavior and Biocompatibility of Diamond-like Carbon-Coated Zinc: An In Vitro Study

Owing to the desirable degradation rate and good biocompatibility, zinc (Zn) and Zn alloys are promising biodegradable implant metals in orthopedic and cardiovascular applications. Surface modification, such as deposition of coatings, is frequently implemented to further enhance their biological properties. In this study, diamond-like carbon (DLC) films are deposited on Zn by magnetron sputtering. The DLC films do not change the surface morphology of Zn but alter the hydrophobic properties with a contact angle of approximately 90°. Electrochemical and in vitro immersion tests reveal that the corrosion resistances of the DLC-coated Zn decrease unexpectedly, which is possibly due to galvanic corrosion between the DLC film and Zn substrate. Furthermore, the uncoated and coated Zn samples show hemolysis ratios less than 1%. The cells cultured in the Zn extract exhibit higher viability than those cultured in the extract of the DLC-coated Zn, suggesting that the DLC films decrease the cytocompatibility of Zn. The lower corrosion resistance has little influence on the hemolysis ratio, suggesting that hemolysis is not an obstacle for the design of Zn-based biomaterials. Our results show that the traditional concept of protection with DLC films may not be applicable universally and decreased corrosion resistance and cytocompatibility are actually observed in DLC-coated Zn.