Yellow-Emitting Hydrophobic Carbon Dots via Solid-Phase Synthesis and Their Applications

High selectivity fluorescence-based CQDs@cellulose membrane sensor for detection of hazardous gas

Toluene, a harmful gas, is extremely harmful to living organisms, and its distribution and concentration in the environment have always attracted much attention. However, traditional detection methods have poor selectivity, cannot detect low concentrations, and the equipment is bulky, expensive, and time-consuming. In this study, a fluorescence spectroscopy method based on carbon quantum dots (CQDs) composite cellulose membrane (CQDs@CMC membrane) was developed, which addressed the limitations of CQDs, such as excessive operational expenses, intricate detection procedures, and prolonged analysis duration, enabling highly sensitive and specifically targeted detection of toluene gas. Firstly, hydrophobic propylene glycol/betaine (Gly/Bet) CQDs was prepared by hydrothermal method, and Gly/Bet CQDs composite membranes were prepared by combining them with CMC membrane, and they were characterized separately. It was found that Gly/Bet CQDs had a slight blue shift compared to the optimal excitation wavelength of the Gly/Bet CQDs @CMC membrane. Gly/Bet CQDs were uniformly loaded on the CMC membrane, and the fluorescence lifetime and fluorescence quantum yield (FQY) increased to 5.3 ns and 18.34 ns, respectively. The detection of harmful gas toluene was carried out by Gly/Bet CQDs composite membrane, and the toluene concentration had a great influence on the fluorescence intensity of Gly/Bet CQDs@CMC membrane, and when the toluene concentration was in the range of 200-1400 ppm, the fluorescence intensity was in proportion to the toluene concentration. The detection limit for p-toluene is 0.452 ppm, which is very sensitive. According to the results, the Gly/Bet CQDs@CMC membrane is capable of effectively detecting toluene gas, which offers a solid theoretical foundation for the later use of toluene emission in real industry and toluene gas detection in daily life. In addition, it detects toluene and interfering gases with high selectivity.

Carbon Dots: A Review with Focus on Sustainability

Carbon dots (CDs) are an emerging class of nanomaterials with attractive optical properties, which promise to enable a variety of applications. An important and timely question is whether CDs can become a functional and sustainable alternative to incumbent optical nanomaterials, notably inorganic quantum dots. Herein, the current CD literature is comprehensively reviewed as regards to their synthesis and function, with a focus on sustainability aspects. The study quantifies why it is attractive that CDs can be synthesized with biomass as the sole starting material and be free from toxic and precious metals and critical raw materials. It further describes and analyzes employed pretreatment, chemical-conversion, purification, and processing procedures, and highlights current issues with the usage of solvents, the energy and material efficiency, and the safety and waste management. It is specially shown that many reported synthesis and processing methods are concerningly wasteful with the utilization of non-sustainable solvents and energy. It is finally recommended that future studies should explicitly consider and discuss the environmental influence of the selected starting material, solvents, and generated byproducts, and that quantitative information on the required amounts of solvents, consumables, and energy should be provided to enable an evaluation of the presented methods in an upscaled sustainability context.

Synthesis, properties and potential applications of photoluminescent carbon nanoparticles: A review

Photoluminescent-carbon nanoparticles (PL-CNPs) are a new class of materials that received immense interest among researchers due to their distinct characteristics, including photoluminescence, high surface-to-volume ratio, low cost, ease of synthesis, high quantum yield, and biocompatibility. By exploiting these outstanding properties, many studies have been reported on its utility as sensors, photocatalysts, probes for bio-imaging, and optoelectronics applications. From clinical applications to point-of-care test devices, drug loading to tracking of drug delivery, and other research innovations demonstrated PL-CNPs as an emerging material that could substitute conventional approaches. However, some of the PL-CNPs have poor PL properties and selectivity due to the presence of impurities (e.g., molecular fluorophores) and unfavourable surface charges by the passivation molecules, which impede their applications in many fields. To address these issues, many researchers have been paying great attention to developing new PL-CNPs with different composite combinations to achieve high PL properties and selectivity. Herein, we thoroughly discussed the recent development of various synthetic strategies employed to prepare PL-CNPs, doping effects, photostability, biocompatibility, and applications in sensing, bioimaging, and drug delivery fields. Moreover, the review discussed the limitations, future direction, and perspectives of PL-CNPs in possible potential applications.

Hydrophobic Carbon Dots Derived from Organic Pollutants and Applications in NIR Anticounterfeiting and Bioimaging

In an effort to fulfill the strategy of sustainable development, Rhodamine B, a common and toxic organic pollutant in the textile industry, was reported for the first time as a single precursor to develop a kind of novel hydrophobic nitrogen-doped carbon dot (HNCD) through a green and facile one-pot solvothermal method. The HNCDs with an average size of 3.6 nm possess left and right water contact angles of 109.56° and 110.34°, respectively. The HNCDs manifest excitation wavelength-tunable and upconverted fluorescence from the ultraviolet (UV) to the near-infrared (NIR) range. Furthermore, the PEGylation of HNCDs enables them to be used as an optical marker for cell and in vivo imaging. Notably, the HNCDs with solvent-dependent fluorescence can be used for invisible inks with a wide range of light responses from UV-vis-NIR spectra. This work not only provides an innovative way to recycle chemical waste but also expands the potential application of HNCDs in NIR security printing and bioimaging.

Solid-Phase Synthesis of Red Fluorescent Carbon Dots for the Dual-Mode Detection of Hexavalent Chromium and Cell Imaging

The excellent optical properties and biocompatibility of red fluorescence carbon dots (R-CDs) provide a new approach for the effective analysis of hexavalent chromium Cr(VI) in environmental and biological samples. However, the application of R-CDs is still limited by low yield and unfriendly synthesis route. In this study, we developed a new type of R-CDs based on a simple and green solid-phase preparation strategy. The synthesized R-CDs can emit bright red fluorescence with an emission wavelength of 625 nm and also have an obvious visible light absorption capacity. Furthermore, the absorption and fluorescence signals of the R-CDs aqueous solution are sensitive to Cr(VI), which is reflected in color change and fluorescence quenching. Based on that, a scanometric and fluorescent dual-mode analysis system for the rapid and accurate detection of Cr(VI) was established well within the limit of detection at 80 nM and 9.1 nM, respectively. The proposed methods also possess high specificity and were applied for the detection of Cr(VI) in real water samples. More importantly, the synthesized R-CDs with good biocompatibility were further successfully applied for visualizing intracellular Cr(VI) in Hela cells.

Development of Highly Luminescent Water-Insoluble Carbon Dots by Using Calix[4]pyrrole as the Carbon Precursor and Their Potential Application in Organic Solar Cells

Carbon dots (CDs) are carbon-based fluorescent nanomaterials that are of interest in different research areas due to their low cost production and low toxicity. Considering their unique photophysical properties, hydrophobic/amphiphilic CDs are powerful alternatives to metal-based quantum dots in LED and photovoltaic cell designs. On the other hand, CDs possess a considerably high amount of surface defects that give rise to two significant drawbacks: (1) causing decrease in quantum yield (QY), a crucial drawback that limits their utilization in LEDs, and (2) affecting the efficiency of charge transfer, a significant factor that limits the use of CDs in photovoltaic cells. In this study, we synthesized highly luminescent, water-insoluble, slightly amphiphilic CDs by using a macrocyclic compound, calix[4]pyrrole, for the first time in the literature. Calix[4]pyrrole-derived CDs (CP-DOTs) were highly luminescent with a QY of over 60% and size of around 4-10 nm with graphitic structure. The high quantum yield of CP-DOTs indicated that they had less amount of surface defects. Furthermore, CP-DOTs were used as an additive in the active layer of organic solar cells (OSC). The photovoltaic parameters of OSCs improved upon addition of CDs. Our results indicated that calix[4]pyrrole is an excellent carbon precursor to synthesize highly luminescent and water-insoluble carbon dots, and CDs derived from calix[4]pyrrole are excellent candidates to improve optoelectronic devices.

Multi-carbon dots and aptamer based signal amplification ratiometric fluorescence probe for protein tyrosine kinase 7 detection

Background

Protein tyrosine kinase 7 (PTK 7) is a membrane receptor, which can be found in various kinds of cancers. In view of this, detection of PTK 7 in the peripheral circulation would be an effective way for the early diagnosis of cancer.

Results

In this work, a multi-carbon dots and aptamer-based signal amplification ratiometric fluorescence probe was developed. The fluorescence of the aptamer-modified y-CDs and b-CDs were respectively chosen as the detection signal and interior label. The fluorescence of y-CDs was quenched by Fe₃O₄ and cDNA (complement to aptamer) compound without PTK 7, but recovered by the addition of PTK 7. Then, the free aptamer was cut by DNase I, which amplified the detection signal. The ratiometric fluorescence sensor for PTK 7 was established with the LOD of 0.016 ng mL⁻¹.

Conclusions

Summary, a multi-carbon dots and aptamer-based signal amplification ratiometric fluorescence probe was developed for the detection of protein tyrosine kinase 7. The developed probe was applied to PTK 7 detection in MCF-7 cells and human serum with satisfying results, thus indicating that this probe has huge potential in clinical practice.